| Age | Commit message (Collapse) | Author |
|---|
|
The mutex will be used in subsequent changes to replace the busy looping of
a waiter when the futex owner is currently executing the exit cleanup to
prevent a potential live lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.845798895@linutronix.de
|
|
exec() attempts to handle potentially held futexes gracefully by running
the futex exit handling code like exit() does.
The current implementation has no protection against concurrent incoming
waiters. The reason is that the futex state cannot be set to
FUTEX_STATE_DEAD after the cleanup because the task struct is still active
and just about to execute the new binary.
While its arguably buggy when a task holds a futex over exec(), for
consistency sake the state handling can at least cover the actual futex
exit cleanup section. This provides state consistency protection accross
the cleanup. As the futex state of the task becomes FUTEX_STATE_OK after the
cleanup has been finished, this cannot prevent subsequent attempts to
attach to the task in case that the cleanup was not successfull in mopping
up all leftovers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.753355618@linutronix.de
|
|
Instead of having a smp_mb() and an empty lock/unlock of task::pi_lock move
the state setting into to the lock section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.645603214@linutronix.de
|
|
Instead of relying on PF_EXITING use an explicit state for the futex exit
and set it in the futex exit function. This moves the smp barrier and the
lock/unlock serialization into the futex code.
As with the DEAD state this is restricted to the exit path as exec
continues to use the same task struct.
This allows to simplify that logic in a next step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.539409004@linutronix.de
|
|
Setting task::futex_state in do_exit() is rather arbitrarily placed for no
reason. Move it into the futex code.
Note, this is only done for the exit cleanup as the exec cleanup cannot set
the state to FUTEX_STATE_DEAD because the task struct is still in active
use.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.439511191@linutronix.de
|
|
To allow separate handling of the futex exit state in the futex exit code
for exit and exec, split futex_mm_release() into two functions and invoke
them from the corresponding exit/exec_mm_release() callsites.
Preparatory only, no functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.332094221@linutronix.de
|
|
mm_release() contains the futex exit handling. mm_release() is called from
do_exit()->exit_mm() and from exec()->exec_mm().
In the exit_mm() case PF_EXITING and the futex state is updated. In the
exec_mm() case these states are not touched.
As the futex exit code needs further protections against exit races, this
needs to be split into two functions.
Preparatory only, no functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.240518241@linutronix.de
|
|
The futex exit handling relies on PF_ flags. That's suboptimal as it
requires a smp_mb() and an ugly lock/unlock of the exiting tasks pi_lock in
the middle of do_exit() to enforce the observability of PF_EXITING in the
futex code.
Add a futex_state member to task_struct and convert the PF_EXITPIDONE logic
over to the new state. The PF_EXITING dependency will be cleaned up in a
later step.
This prepares for handling various futex exit issues later.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.149449274@linutronix.de
|
|
The futex exit handling is #ifdeffed into mm_release() which is not pretty
to begin with. But upcoming changes to address futex exit races need to add
more functionality to this exit code.
Split it out into a function, move it into futex code and make the various
futex exit functions static.
Preparatory only and no functional change.
Folded build fix from Borislav.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.049705556@linutronix.de
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5396:24: warning: variable vif set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5397:17: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5400:6: warning: variable len set but not used [-Wunused-but-set-variable]
They are introduced by commit e542e66b7c2e ("rtl8xxxu:
add bluetooth co-existence support for single antenna"), but never used,
so remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
This fixes a minor WARNING in the cfg80211:
[ 130.658034] ------------[ cut here ]------------
[ 130.662805] WARNING: CPU: 1 PID: 610 at net/wireless/core.c:954 wiphy_unregister+0xb4/0x198 [cfg80211]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Keeping interrupts on could result in brcmfmac freeing some resources
and then IRQ handlers trying to use them. That was obviously a straight
path for crashing a kernel.
Example:
CPU0 CPU1
---- ----
brcmf_pcie_reset
brcmf_pcie_bus_console_read
brcmf_detach
...
brcmf_fweh_detach
brcmf_proto_detach
brcmf_pcie_isr_thread
...
brcmf_proto_msgbuf_rx_trigger
...
drvr->proto->pd
brcmf_pcie_release_irq
[ 363.789218] Unable to handle kernel NULL pointer dereference at virtual address 00000038
[ 363.797339] pgd = c0004000
[ 363.800050] [00000038] *pgd=00000000
[ 363.803635] Internal error: Oops: 17 [#1] SMP ARM
(...)
[ 364.029209] Backtrace:
[ 364.031725] [<bf243838>] (brcmf_proto_msgbuf_rx_trigger [brcmfmac]) from [<bf2471dc>] (brcmf_pcie_isr_thread+0x228/0x274 [brcmfmac])
[ 364.043662] r7:00000001 r6:c8ca0000 r5:00010000 r4:c7b4f800
Fixes: 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Different interfaces have its own link-related power save mechanism.
Such as PCI can enter L1 state based on the traffic on the link, and
sometimes driver needs to enable/disable it to avoid some issues, like
throughput degrade when PCI trying to enter L1 state even if driver is
having heavy traffic.
For now, rtw88 only supports PCIE chips, and they just need to disable
ASPM L1 when driver is not in power save mode, such as IPS and LPS.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
By Realtek's design, there are two HW modules associated for CLKREQ,
one is responsible to follow the PCIE host settings, and another
is to actually working on it. But the module that is actually working
on it is default disabled, and driver should enable that module if
host and device have successfully sync'ed with each other.
The module is default disabled because sometimes the host does not
support it, and if there is any incorrect settings (ex. CLKREQ# is
not Bi-Direction), device can be lost and disconnected to the host.
So driver should first check after host and device are sync'ed, and
the host does support the function and set it in configuration
space, then driver can turn on the HW module to working on it.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Use a for loop to polling DBI/MDIO read/write flags to avoid
infinite loop happens
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Add some register and bit macros to access DBI/MDIO register. This
should not change the logic.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Pass HE interface type data requests between firmware and driver.
Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Extension information elements have additional field for ID. This
commit adds TLV for such elements and a structure for interface HE
capabilities communication with firmware.
Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Firmware floods all packets that need to be flooded (multicast, broadcast,
unknown unicast) as required. Tell kernel bridge subsystem it does not
need to flood packet itself by marking each incoming frame
with skb->offload_fwd_mark flag.
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Use MAC address of the first active radio as a unique device ID.
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Add interface ID information to the tail of each transmitted packet
so that firmware can know to which interface the packet belongs to.
This is only needed if device supports HW switch capability.
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
If firmware reports that it supports hardware switch capabilities,
driver needs to track and notify device whenever broadcast domain
of a particular network device changes (ie. whenever it's upper
master device changes).
Firmware needs a unique ID to tell broadcast domains from each other
which is an opaque number otherwise. For that purpose we can use
netspace:ifidx pair to uniquely identify each broadcast domain:
- if netdev is not part of a bridge, then use it's own ifidx
as a broadcast domain ID
- if netdev is part of a bridge, then use bridge netdev ifidx
as broadcast domain ID
Firmware makes sure that packets are only forwarded between
interfaces marked with the same broadcast domain ID.
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Currently in case of error when registering network device with the
kernel, we won't properly cleanup VIF state in firmware due to DEL_VIF
command will not be send to wifi card. Make sure it does.
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Since read RF register is an indirect access that hardware needs time to
accomplish read action, but there's no ready bit, so delay is required to
guarantee the read value is correct. After investigating internal documents,
these delays are reduced as proper values.
Reported-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
rf_lock is used to protect RF register access, but they will not called
from interrupt context, so *_irqsave version isn't necessary. Then, these
delays don't affect IRQ services.
The old code holds spin_lock_irqsave() that will be detected a long delay
as below:
kworker/-276 4d... 0us : _raw_spin_lock_irqsave
kworker/-276 4d... 0us : rtl8723_phy_rf_serial_read <-rtl8723de_phy_set_rf_reg
kworker/-276 4d... 1us : rtl8723_phy_query_bb_reg <-rtl8723_phy_rf_serial_read
kworker/-276 4d... 3us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read
kworker/-276 4d... 4us : __const_udelay <-rtl8723_phy_rf_serial_read
kworker/-276 4d... 4us!: delay_mwaitx <-rtl8723_phy_rf_serial_read
kworker/-276 4d... 1004us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read
[...]
Reported-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/intel/ipw2x00/ipw2100.c: In function shim__set_security:
drivers/net/wireless/intel/ipw2x00/ipw2100.c:5582:9: warning: variable force_update set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/intel/ipw2x00/ipw2200.c: In function ipw_wx_set_mlme:
drivers/net/wireless/intel/ipw2x00/ipw2200.c:6805:9: warning: variable reason set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Instead of multiplying by page order, virtio balloon divided by page
order. The result is that it can return 0 if there are a bit less
than MAX_ORDER - 1 pages in use, and then shrinker scan won't be called.
Cc: stable@vger.kernel.org
Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker")
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
|
|
virtio_balloon_shrinker_scan should return number of system pages freed,
but because it's calling functions that deal with balloon pages, it gets
confused and sometimes returns the number of balloon pages.
It does not matter practically as the exact number isn't
used, but it seems better to be consistent in case someone
starts using this API.
Further, if we ever tried to iteratively leak pages as
virtio_balloon_shrinker_scan tries to do, we'd run into issues - this is
because freed_pages was accumulating total freed pages, but was also
subtracted on each iteration from pages_to_free, which can result in
either leaking less memory than we were supposed to free, or more if
pages_to_free underruns.
On a system with 4K pages we are lucky that we are never asked to leak
more than 128 pages while we can leak up to 256 at a time,
but it looks like a real issue for systems with page size != 4K.
Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker")
Reported-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_get_regaddr:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:790:5: warning: variable mpnum set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_erom_scan:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:866:10: warning: variable nsp set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_erom_scan:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:866:5: warning: variable nmp set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
In the bnx2fc_eh_abort() function there is a calculation for
wait_for_completion that uses a HZ multiplier. This is incorrect, it
scales the timeout by 1000 seconds instead of converting the ms value to
jiffies. Therefore change the calculation.
Link: https://lore.kernel.org/r/1574178394-16635-1-git-send-email-loberman@redhat.com
Reported-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: John Pittman <jpittman@redhat.com>
Reviewed-by: Chad Dupuis <cdupuis1@gmail.com>
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization
to constant") accidentally changed a check from -ENOTSUPP to -ENOSYS,
causing failures if reset controller support is not enabled. E.g. on
r7s72100/rskrza1:
sh-eth e8203000.ethernet: MDIO init failed: -524
sh-eth: probe of e8203000.ethernet failed with error -524
Seen on r8a7740/armadillo, r7s72100/rskrza1, and r7s9210/rza2mevb.
Fixes: 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization to constant")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 075e238d12c21c8bde700d21fb48be7a3aa80194.
Going to go with Geert's fix instead, which also has a
correct Fixes tag.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to hardware user manual, bits5~7 in register
HCLGE_MISC_VECTOR_INT_STS means reset interrupts status,
but HCLGE_RESET_INT_M is defined as bits0~2 now. So it
will make hclge_reset_err_handle() read the wrong reset
interrupt status.
This patch fixes this wrong bit mask.
Fixes: 2336f19d7892 ("net: hns3: check reset interrupt status when reset fails")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pm_runtime_put_autosuspend in probe will call runtime suspend to
disable clks automatically if CONFIG_PM is defined. (If CONFIG_PM
is not defined, its implementation will be empty, then runtime
suspend will not be called.)
Therefore, we can call pm_runtime_get_sync to runtime resume it
first to enable clks, which matches the runtime suspend. (Only when
CONFIG_PM is defined, otherwise pm_runtime_get_sync will also be
empty, then runtime resume will not be called.)
Then it is fine to disable clks without causing clock count mis-match.
Fixes: c43eab3eddb4 ("net: fec: add missed clk_disable_unprepare in remove")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when configuring act_pedit rules, the number of keys is validated only on
addition of a new entry. This is not sufficient to avoid hitting a WARN()
in the traffic path: for example, it is possible to replace a valid entry
with a new one having 0 extended keys, thus causing splats in dmesg like:
pedit BUG: index 42
WARNING: CPU: 2 PID: 4054 at net/sched/act_pedit.c:410 tcf_pedit_act+0xc84/0x1200 [act_pedit]
[...]
RIP: 0010:tcf_pedit_act+0xc84/0x1200 [act_pedit]
Code: 89 fa 48 c1 ea 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ac 00 00 00 48 8b 44 24 10 48 c7 c7 a0 c4 e4 c0 8b 70 18 e8 1c 30 95 ea <0f> 0b e9 a0 fa ff ff e8 00 03 f5 ea e9 14 f4 ff ff 48 89 58 40 e9
RSP: 0018:ffff888077c9f320 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffac2983a2
RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888053927bec
RBP: dffffc0000000000 R08: ffffed100a726209 R09: ffffed100a726209
R10: 0000000000000001 R11: ffffed100a726208 R12: ffff88804beea780
R13: ffff888079a77400 R14: ffff88804beea780 R15: ffff888027ab2000
FS: 00007fdeec9bd740(0000) GS:ffff888053900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffdb3dfd000 CR3: 000000004adb4006 CR4: 00000000001606e0
Call Trace:
tcf_action_exec+0x105/0x3f0
tcf_classify+0xf2/0x410
__dev_queue_xmit+0xcbf/0x2ae0
ip_finish_output2+0x711/0x1fb0
ip_output+0x1bf/0x4b0
ip_send_skb+0x37/0xa0
raw_sendmsg+0x180c/0x2430
sock_sendmsg+0xdb/0x110
__sys_sendto+0x257/0x2b0
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0xa5/0x4e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fdeeb72e993
Code: 48 8b 0d e0 74 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 0d d6 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24
RSP: 002b:00007ffdb3de8a18 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055c81972b700 RCX: 00007fdeeb72e993
RDX: 0000000000000040 RSI: 000055c81972b700 RDI: 0000000000000003
RBP: 00007ffdb3dea130 R08: 000055c819728510 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
R13: 000055c81972b6c0 R14: 000055c81972969c R15: 0000000000000080
Fix this moving the check on 'nkeys' earlier in tcf_pedit_init(), so that
attempts to install rules having 0 keys are always rejected with -EINVAL.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modifying the link settings via phylink_ethtool_ksettings_set() and
phylink_ethtool_set_pauseparam() didn't always work as intended for
PHY based setups, as calling phylink_mac_config() would result in the
unresolved configuration being committed to the MAC, rather than the
configuration with the speed and duplex setting.
This would work fine if the update caused the link to renegotiate,
but if no settings have changed, phylib won't trigger a renegotiation
cycle, and the MAC will be left incorrectly configured.
Avoid calling phylink_mac_config() unless we are using an inband mode
in phylink_ethtool_ksettings_set(), and use phy_set_asym_pause() as
introduced in 4.20 to set the PHY settings in
phylink_ethtool_set_pauseparam().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the documentation on phylink's create and destroy functions to
explicitly state that the rtnl lock must not be held while calling
these.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Print the string for which conversion failed instead of printing the
function name twice.
Fixes: 2650d71e244f ("target: move transport ID handling to the core")
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If a faulty initiator fails to bind the socket to the iSCSI connection
before emitting a command, for instance, a subsequent send_pdu, it will
crash the kernel due to a null pointer dereference in sock_sendmsg(), as
shown in the log below. This patch makes sure the bind succeeded before
trying to use the socket.
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker
[ 24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20
[...]
[ 24.161739] RSP: 0018:ffffab6440043ca0 EFLAGS: 00010282
[ 24.162400] RAX: ffffffff891c1c00 RBX: ffffffff89d53968 RCX: 0000000000000001
[ 24.163253] RDX: 0000000000000030 RSI: ffffab6440043d00 RDI: 0000000000000000
[ 24.164104] RBP: 0000000000000030 R08: 0000000000000030 R09: 0000000000000030
[ 24.165166] R10: ffffffff893e66a0 R11: 0000000000000018 R12: ffffab6440043d00
[ 24.166038] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d5575a62e90
[ 24.166919] FS: 0000000000000000(0000) GS:ffff9d557db80000(0000) knlGS:0000000000000000
[ 24.167890] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.168587] CR2: 0000000000000018 CR3: 000000007a838000 CR4: 00000000000006e0
[ 24.169451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 24.170320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 24.171214] Call Trace:
[ 24.171537] security_socket_sendmsg+0x3a/0x50
[ 24.172079] sock_sendmsg+0x16/0x60
[ 24.172506] iscsi_sw_tcp_xmit_segment+0x77/0x120
[ 24.173076] iscsi_sw_tcp_pdu_xmit+0x58/0x170
[ 24.173604] ? iscsi_dbg_trace+0x63/0x80
[ 24.174087] iscsi_tcp_task_xmit+0x101/0x280
[ 24.174666] iscsi_xmit_task+0x83/0x110
[ 24.175206] iscsi_xmitworker+0x57/0x380
[ 24.175757] ? __schedule+0x2a2/0x700
[ 24.176273] process_one_work+0x1b5/0x360
[ 24.176837] worker_thread+0x50/0x3c0
[ 24.177353] kthread+0xf9/0x130
[ 24.177799] ? process_one_work+0x360/0x360
[ 24.178401] ? kthread_park+0x90/0x90
[ 24.178915] ret_from_fork+0x35/0x40
[ 24.179421] Modules linked in:
[ 24.179856] CR2: 0000000000000018
[ 24.180327] ---[ end trace b4b7674b6df5f480 ]---
Signed-off-by: Anatol Pomazau <anatol@google.com>
Co-developed-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Co-developed-by: Bharath Ravi <rbharath@google.com>
Signed-off-by: Bharath Ravi <rbharath@google.com>
Co-developed-by: Khazhimsel Kumykov <khazhy@google.com>
Signed-off-by: Khazhimsel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The iSCSI target driver is the only target driver that does not wait for
ongoing commands to finish before freeing a session. Make the iSCSI target
driver wait for ongoing commands to finish before freeing a session. This
patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710
Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247
CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: target_completion target_complete_ok_work [target_core_mod]
Call Trace:
dump_stack+0x8a/0xd6
print_address_description.constprop.0+0x40/0x60
__kasan_report.cold+0x1b/0x33
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
__lock_acquire+0xb1a/0x2710
lock_acquire+0xd3/0x200
_raw_spin_lock_irqsave+0x43/0x60
target_release_cmd_kref+0x162/0x7f0 [target_core_mod]
target_put_sess_cmd+0x2e/0x40 [target_core_mod]
lio_check_stop_free+0x12/0x20 [iscsi_target_mod]
transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod]
target_complete_ok_work+0x1b0/0x790 [target_core_mod]
process_one_work+0x549/0xa40
worker_thread+0x7a/0x5d0
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Allocated by task 889:
save_stack+0x23/0x90
__kasan_kmalloc.constprop.0+0xcf/0xe0
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xf6/0x360
transport_alloc_session+0x29/0x80 [target_core_mod]
iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Freed by task 1025:
save_stack+0x23/0x90
__kasan_slab_free+0x13a/0x190
kasan_slab_free+0x12/0x20
kmem_cache_free+0x146/0x400
transport_free_session+0x179/0x2f0 [target_core_mod]
transport_deregister_session+0x130/0x180 [target_core_mod]
iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod]
iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
The buggy address belongs to the object at ffff8881154ec9c0
which belongs to the cache se_sess_cache of size 352
The buggy address is located 176 bytes inside of
352-byte region [ffff8881154ec9c0, ffff8881154ecb20)
The buggy address belongs to the page:
page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400
raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
Cc: Mike Christie <mchristi@redhat.com>
Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.org
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The SCSI specs require releasing SPC-2 reservations when a session is
closed. Make sure that the target core does this.
Running the libiscsi tests triggers the KASAN complaint shown below. This
patch fixes that use-after-free.
BUG: KASAN: use-after-free in target_check_reservation+0x171/0x980 [target_core_mod]
Read of size 8 at addr ffff88802ecd1878 by task iscsi_trx/17200
CPU: 0 PID: 17200 Comm: iscsi_trx Not tainted 5.4.0-rc1-dbg+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x8a/0xd6
print_address_description.constprop.0+0x40/0x60
__kasan_report.cold+0x1b/0x34
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
target_check_reservation+0x171/0x980 [target_core_mod]
__target_execute_cmd+0xb1/0xf0 [target_core_mod]
target_execute_cmd+0x22d/0x4d0 [target_core_mod]
transport_generic_new_cmd+0x31f/0x5b0 [target_core_mod]
transport_handle_cdb_direct+0x6f/0x90 [target_core_mod]
iscsit_execute_cmd+0x381/0x3f0 [iscsi_target_mod]
iscsit_sequence_cmd+0x13b/0x1f0 [iscsi_target_mod]
iscsit_process_scsi_cmd+0x4c/0x130 [iscsi_target_mod]
iscsit_get_rx_pdu+0x8e8/0x15f0 [iscsi_target_mod]
iscsi_target_rx_thread+0x105/0x1b0 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Allocated by task 1079:
save_stack+0x23/0x90
__kasan_kmalloc.constprop.0+0xcf/0xe0
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xfe/0x3a0
transport_alloc_session+0x29/0x80 [target_core_mod]
iscsi_target_login_thread+0xceb/0x1920 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Freed by task 17193:
save_stack+0x23/0x90
__kasan_slab_free+0x13a/0x190
kasan_slab_free+0x12/0x20
kmem_cache_free+0xc8/0x3e0
transport_free_session+0x179/0x2f0 [target_core_mod]
transport_deregister_session+0x121/0x170 [target_core_mod]
iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
iscsit_response_queue+0x8fa/0xc00 [iscsi_target_mod]
iscsi_target_tx_thread+0x28e/0x390 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
The buggy address belongs to the object at ffff88802ecd1860
which belongs to the cache se_sess_cache of size 352
The buggy address is located 24 bytes inside of
352-byte region [ffff88802ecd1860, ffff88802ecd19c0)
The buggy address belongs to the page:
page:ffffea0000bb3400 refcount:1 mapcount:0 mapping:ffff8880bef2ed00 index:0x0 compound_mapcount: 0
flags: 0x1000000000010200(slab|head)
raw: 1000000000010200 dead000000000100 dead000000000122 ffff8880bef2ed00
raw: 0000000000000000 0000000080270027 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88802ecd1700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88802ecd1780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88802ecd1800: fb fb fb fb fc fc fc fc fc fc fc fc fb fb fb fb
^
ffff88802ecd1880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88802ecd1900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Cc: Mike Christie <mchristi@redhat.com>
Link: https://lore.kernel.org/r/20191113220508.198257-2-bvanassche@acm.org
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since it is nontrivial to derive the meaning of the size argument from the
code, add a documentation header above target_cmd_size_check().
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Link: https://lore.kernel.org/r/20191107215458.64242-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The member hba->pcidev may be used after its reference is dropped. Move the
put function to where it is never used to avoid potential use after free
issues.
Fixes: a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr")
Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This reverts commit 2f856d4e8c23f5ad5221f8da4a2f22d090627f19.
This patch was found to introduce a double free regression. The issue
it originally attempted to address was fixed in patch
f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path").
Link: https://lore.kernel.org/r/4BDE2B95-835F-43BE-A32C-2629D7E03E0A@marvell.com
Requested-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a module parameter to inhibit disconnect/reselect for individual
targets. This gains compatibility with Aztec PowerMonster SCSI/SATA
adapters with buggy firmware. (No fix is available from the vendor.)
Apparently these adapters pass-through the product/vendor of the attached
SATA device. Since they can't be identified from the response to an INQUIRY
command, a device blacklist flag won't work.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/993b17545990f31f9fa5a98202b51102a68e7594.1573875417.git.fthain@telegraphics.com.au
Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When do_abort() succeeds, the target will go to BUS FREE phase and there
will be no connected command. Therefore, that function should clear the
Initiator Command Register before returning. It already does so in case of
NCR5380_poll_politely() failure; do the same for the other error case too,
that is, NCR5380_transfer_pio() failure.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Ondrej Zary <linux@zary.sk>
Link: https://lore.kernel.org/r/4277b28ee2551f884aefa85965ef3c498344f301.1573875417.git.fthain@telegraphics.com.au
Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Most NCR5380 drivers calculate the residual for every data transfer.
(A few drivers just set it to zero.) Pass this quantity back to the scsi
mid-layer on command completion.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Ondrej Zary <linux@zary.sk>
Link: https://lore.kernel.org/r/1f26ead9dd0dc053fcd27979d69a7ca74b6589b4.1573875417.git.fthain@telegraphics.com.au
Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Passing the parameter "num_tgts=-1" will start an infinite loop that
exhausts the system memory
Link: https://lore.kernel.org/r/20191115163727.24626-1-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Looking at the recent conversion from smp_processor_id() to
raw_smp_processor_id(), realized that the allocation should be based on the
cpu the hdwq is bound to, not the executing cpu.
Revise to pull cpu number from the hdwq
Fixes: 765ab6cdac3b ("scsi: lpfc: Fix a kernel warning triggered by lpfc_get_sgl_per_hdwq()")
Link: https://lore.kernel.org/r/20191116003847.6141-1-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
