| Age | Commit message (Collapse) | Author |
|---|
|
timeout
The SD card is recognized failed sometimes when resume from suspend.
Because CD# debounce time too long then card present report wrong.
Finally, card is recognized failed.
Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221104095512.4068-1-chevron.li@bayhubtech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In mmc_select_voltage(), if there is no full power cycle, the voltage
range selected at the end of the function will be on a single range
(e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V),
the mask shift should be reduced by 1.
This issue was triggered by using a specific SD-card (Verbatim Premium
16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes
and there is no power cycle. And the card was failing to switch to
high-speed mode. When adding the range 3.2V/3.3V for this card with the
proposed shift change, the card can switch to high-speed mode.
Fixes: ce69d37b7d8f ("mmc: core: Prevent violation of specs while initializing cards")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
We've used a temporary platform device for firmware EDID loading since
it was introduced in commit da0df92b5731 ("drm: allow loading an EDID as
firmware to override broken monitor"), but there's no explanation why.
Using a temporary device does not play well with CONFIG_FW_CACHE=y,
which caches firmware images (e.g. on suspend) so that drivers can
request firmware when the system is not ready for it, and return the
images from the cache (e.g. during resume). This works automatically for
regular devices, but obviously not for a temporarily created device.
Stop using the throwaway platform device, and use the drm device
instead.
Note that this may still be problematic for cases where the display was
plugged in during suspend, and the firmware wasn't loaded and therefore
not cached before suspend.
References: https://lore.kernel.org/r/20220727074152.43059-1-matthieu.charette@gmail.com
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2061
Reported-by: Matthieu CHARETTE <matthieu.charette@gmail.com>
Tested-by: Matthieu CHARETTE <matthieu.charette@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114111709.434979-1-jani.nikula@intel.com
|
|
sk->sk_user_data has multiple users, which are not compatible with each
other. Writers must synchronize by grabbing the sk->sk_callback_lock.
l2tp currently fails to grab the lock when modifying the underlying tunnel
socket fields. Fix it by adding appropriate locking.
We err on the side of safety and grab the sk_callback_lock also inside the
sk_destruct callback overridden by l2tp, even though there should be no
refs allowing access to the sock at the time when sk_destruct gets called.
v4:
- serialize write to sk_user_data in l2tp sk_destruct
v3:
- switch from sock lock to sk_callback_lock
- document write-protection for sk_user_data
v2:
- update Fixes to point to origin of the bug
- use real names in Reported/Tested-by tags
Cc: Tom Parkin <tparkin@katalix.com>
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Haowei Yan <g1042620637@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support the kernel's nomodeset parameter for all PCI-based fbdev
drivers that use aperture helpers to remove other, hardware-agnostic
graphics drivers.
The parameter is a simple way of using the firmware-provided scanout
buffer if the hardware's native driver is broken. The same effect
could be achieved with per-driver options, but the importance of the
graphics output for many users makes a single, unified approach
worthwhile.
With nomodeset specified, the fbdev driver module will not load. This
unifies behavior with similar DRM drivers. In DRM helpers, modules
first check the nomodeset parameter before registering the PCI
driver. As fbdev has no such module helpers, we have to modify each
driver individually.
The name 'nomodeset' is slightly misleading, but has been chosen for
historical reasons. Several drivers implemented it before it became a
general option for DRM. So keeping the existing name was preferred over
introducing a new one.
v2:
* print a warning if a driver does not init (Helge)
* wrap video_firmware_drivers_only() in helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-3-tzimmermann@suse.de
|
|
Move the nomodeset kernel parameter to drivers/video to make it
available to non-DRM drivers. Adapt the interface, but keep the DRM
interface drm_firmware_drivers_only() to avoid churn within DRM. The
function should later be inlined into callers.
The parameter disables any DRM graphics driver that would replace a
driver for firmware-provided scanout buffers. It is an option to easily
fallback to basic graphics output if the hardware's native driver is
broken. Moving it to a more prominent location wil make it available
to fbdev as well.
v2:
* clarify the meaning of the nomodeset parameter (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-2-tzimmermann@suse.de
|
|
The fbdev damage worker is unused, so remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-7-tzimmermann@suse.de
|
|
Schedule the deferred-I/O worker instead of the damage worker after
writing to the fbdev framebuffer. The deferred-I/O worker then performs
the dirty-fb update. The fbdev emulation will initialize deferred I/O
for all drivers that require damage updates. It is therefore a valid
assumption that the deferred-I/O worker is present.
It would be possible to perform the damage handling directly from within
the write operation. But doing this could increase the overhead of the
write or interfere with a concurrently scheduled deferred-I/O worker.
Instead, scheduling the deferred-I/O worker with its regular delay of
50 ms removes load off the write operation and allows the deferred-I/O
worker to handle multiple write operations that arrived during the delay
time window.
v3:
* remove unused variable (lkp)
v2:
* keep drm_fb_helper_damage() (Daniel)
* use fb_deferred_io_schedule_flush() (Daniel)
* clarify comments (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-6-tzimmermann@suse.de
|
|
Call fb_dirty directly from drm_fb_helper_deferred_io() to avoid the
latency of running the damage worker.
The deferred-I/O helper drm_fb_helper_deferred_io() runs in a worker
thread at regular intervals as part of writing to mmaped framebuffer
memory. It used to schedule the fbdev damage worker to flush the
framebuffer. Changing this to flushing the framebuffer directly avoids
the latency introduced by the damage worker.
v2:
* remove fb_dirty from defio in separate patch (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-5-tzimmermann@suse.de
|
|
The helper for processing deferred I/O on pages has no dependency on
the fb_dirty damge-handling callback; so remove the test. In practice,
deferred I/O is only used with damage handling and the damage worker
already guarantees the presence of the fb_dirty callback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-4-tzimmermann@suse.de
|
|
Move the dirty-fb update from the damage-worker callback into the
new helper drm_fb_helper_fb_dirty(), so that it can run outside the
damage worker. This change will help to remove the damage worker
entirely. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-3-tzimmermann@suse.de
|
|
Set the damage area in the new helper drm_fb_helper_add_damage_clip().
It can now be updated without scheduling the damage worker. This change
will help to remove the damage worker entirely. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-2-tzimmermann@suse.de
|
|
These formats are not subsampled, but that means hsub and vsub should be
1, not 0.
Fixes: 94b292b27734 ("drm: drm_fourcc: add NV15, Q410, Q401 YUV formats")
Reported-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913144306.17279-1-brian.starkey@arm.com
|
|
Commit 30de14b1884b ("s390: current_stack_pointer shouldn't be a
function") made current_stack_pointer a global register variable like
on many other architectures. Unfortunately on s390 it uncovers old
gcc bug which is fixed only since gcc-9.1 [gcc commit 3ad7fed1cc87
("S/390: Fix PR89775. Stackpointer save/restore instructions removed")]
and backported to gcc-8.4 and later. Due to this bug gcc versions prior
to 8.4 generate broken code which leads to stack corruptions.
Current minimal gcc version required to build the kernel is declared
as 5.1. It is not possible to fix all old gcc versions, so work
around this problem by avoiding using global register variable for
current_stack_pointer.
Fixes: 30de14b1884b ("s390: current_stack_pointer shouldn't be a function")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
After the rework from commit 1ebe2e5f9d68 ("block: remove
GENHD_FL_EXT_DEVT"), when calling device_add_disk(), dcssblk will end up
in disk_scan_partitions(), and not break out early w/o GENHD_FL_NO_PART.
This will trigger implicit open/release via blkdev_get/put_whole()
later. dcssblk_release() will then deadlock on dcssblk_devices_sem
semaphore, which is already held from dcssblk_add_store() when calling
device_add_disk().
dcssblk does not support partitions (DCSSBLK_MINORS_PER_DISK == 1), and
never scanned partitions before. Therefore restore the previous
behavior, and explicitly disallow partition scanning by setting the
GENHD_FL_NO_PART flag. This will also prevent this deadlock scenario.
Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT")
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
.data.rel.ro* catches .data.rel.root_cpuacct, and the kernel crashes on
a store in css_clear_dir. At least we know read-only data protection is
working...
Fixes: b6adc6d6d3272 ("powerpc/build: move .data.rel.ro, .sdata2 to read-only")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221116043954.3307852-1-npiggin@gmail.com
|
|
drm_mode_config_init() simply calls drmm_mode_config_init(), hence
cleanup is automatically handled through registering
drm_mode_config_cleanup() with drmm_add_action_or_reset().
While at it, get rid of the deprecated drm_mode_config_init() and
replace it with drmm_mode_config_init() directly.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-6-dakr@redhat.com
|
|
Use drm managed resource allocation (drmm_universal_plane_alloc()) in
order to get rid of the explicit destroy hook in struct drm_plane_funcs.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-5-dakr@redhat.com
|
|
Use drmm_crtc_init_with_planes() instead of drm_crtc_init_with_planes()
to get rid of the explicit destroy hook in struct drm_plane_funcs.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-4-dakr@redhat.com
|
|
Using drm_device->dev_private is deprecated. Since we've switched to
devm_drm_dev_alloc(), struct drm_device is now embedded in struct
malidp_drm, hence we can use container_of() to get the struct drm_device
instance instead.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-3-dakr@redhat.com
|
|
Use drm managed resources to allocate driver structures and get rid of
the deprecated drm_dev_alloc() call and replace it with
devm_drm_dev_alloc().
This also serves as preparation to get rid of drm_device->dev_private
and to fix use-after-free issues on driver unload.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-2-dakr@redhat.com
|
|
In i915_gem_madvise_ioctl() we immediately purge the object is not
currently used, like when the mm.pages are NULL. With shmem the pages
might still be hanging around or are perhaps swapped out. Similarly with
ttm we might still have the pages hanging around on the ttm resource,
like with lmem or shmem, but here we need to be extra careful since
async unbinds are possible as well as in-progress kernel moves. In
i915_ttm_purge() we expect the pipeline-gutting to nuke the ttm resource
for us, however if it's busy the memory is only moved to a ghost object,
which then leads to broken behaviour when for example clearing the
i915_tt->filp, since the actual ttm_tt is still alive and populated,
even though it's been moved to the ghost object. When we later destroy
the ghost object we hit the following, since the filp is now NULL:
[ +0.006982] #PF: supervisor read access in kernel mode
[ +0.005149] #PF: error_code(0x0000) - not-present page
[ +0.005147] PGD 11631d067 P4D 11631d067 PUD 115972067 PMD 0
[ +0.005676] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.012962] Workqueue: events ttm_device_delayed_workqueue [ttm]
[ +0.006022] RIP: 0010:i915_ttm_tt_unpopulate+0x3a/0x70 [i915]
[ +0.005879] Code: 89 fb 48 85 f6 74 11 8b 55 4c 48 8b 7d 30 45 31 c0 31 c9 e8 18 6a e5 e0 80 7d 60 00 74 20 48 8b 45 68
8b 55 08 4c 89 e7 5b 5d <48> 8b 40 20 83 e2 01 41 5c 89 d1 48 8b 70
30 e9 42 b2 ff ff 4c 89
[ +0.018782] RSP: 0000:ffffc9000bf6fd70 EFLAGS: 00010202
[ +0.005244] RAX: 0000000000000000 RBX: ffff8883e12ae380 RCX: 0000000000000000
[ +0.007150] RDX: 000000008000000e RSI: ffffffff823559b4 RDI: ffff8883e12ae3c0
[ +0.007142] RBP: ffff888103b65d48 R08: 0000000000000001 R09: 0000000000000001
[ +0.007144] R10: 0000000000000001 R11: ffff88829c2c8040 R12: ffff8883e12ae3c0
[ +0.007148] R13: 0000000000000001 R14: ffff888115184140 R15: ffff888115184248
[ +0.007154] FS: 0000000000000000(0000) GS:ffff88844db00000(0000) knlGS:0000000000000000
[ +0.008108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.005763] CR2: 0000000000000020 CR3: 000000013fdb4004 CR4: 00000000003706e0
[ +0.007152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ +0.007145] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ +0.007154] Call Trace:
[ +0.002459] <TASK>
[ +0.002126] ttm_tt_unpopulate.part.0+0x17/0x70 [ttm]
[ +0.005068] ttm_bo_tt_destroy+0x1c/0x50 [ttm]
[ +0.004464] ttm_bo_cleanup_memtype_use+0x25/0x40 [ttm]
[ +0.005244] ttm_bo_cleanup_refs+0x90/0x2c0 [ttm]
[ +0.004721] ttm_bo_delayed_delete+0x235/0x250 [ttm]
[ +0.004981] ttm_device_delayed_workqueue+0x13/0x40 [ttm]
[ +0.005422] process_one_work+0x248/0x560
[ +0.004028] worker_thread+0x4b/0x390
[ +0.003682] ? process_one_work+0x560/0x560
[ +0.004199] kthread+0xeb/0x120
[ +0.003163] ? kthread_complete_and_exit+0x20/0x20
[ +0.004815] ret_from_fork+0x1f/0x30
v2:
- Just use ttm_bo_wait() directly (Niranjana)
- Add testcase reference
Testcase: igt@gem_madvise@dontneed-evict-race
Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Reported-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Nirmoy Das <Nirmoy.Das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115104620.120432-1-matthew.auld@intel.com
|
|
vm_fault_ttm() should not expect ttm ghost obj so remove that check.
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024144558.27747-1-nirmoy.das@intel.com
|
|
All calls to i915_vma_move_to_active are surrounded by vma lock
and/or there are multiple local helpers for it in particular tests.
Let's replace it by common helper.
The patch should not introduce functional changes.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019215906.295296-3-andrzej.hajda@intel.com
|
|
Since almost all calls to i915_vma_move_to_active are prepended with
i915_request_await_object, let's call the latter from
_i915_vma_move_to_active by default and add flag allowing bypassing it.
Adjust all callers accordingly.
The patch should not introduce functional changes.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019215906.295296-2-andrzej.hajda@intel.com
|
|
A problem about insmod thunderbolt-net failed is triggered with following
log given while lsmod does not show thunderbolt_net:
insmod: ERROR: could not insert module thunderbolt-net.ko: File exists
The reason is that tbnet_init() returns tb_register_service_driver()
directly without checking its return value, if tb_register_service_driver()
failed, it returns without removing property directory, resulting the
property directory can never be created later.
tbnet_init()
tb_register_property_dir() # register property directory
tb_register_service_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without remove property directory
Fix by remove property directory when tb_register_service_driver() returns
error.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When compiling linux 6.1.0-rc3 configured with CONFIG_64BIT=y and
CONFIG_PARAVIRT_SPINLOCKS=y on x86_64 using LLVM 11.0, an error:
"<inline asm> error: changed section flags for .spinlock.text,
expected:: 0x6" occurred.
The reason is the .spinlock.text in kernel/locking/qspinlock.o
is used many times, but its flags are omitted in subsequent use.
LLVM 11.0 assembler didn't permit to
leave out flags in subsequent uses of the same sections.
So this patch adds the corresponding flags to avoid above error.
Fixes: 501f7f69bca1 ("locking: Add __lockfunc to slow path functions")
Signed-off-by: Guo Jin <guoj17@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221108060126.2505-1-guoj17@chinatelecom.cn
|
|
Deal with errata TGL052, ADL037 and RPL017 "Trace May Contain Incorrect
Data When Configured With Single Range Output Larger Than 4KB" by
disabling single range output whenever larger than 4KB.
Fixes: 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221112151508.13768-1-adrian.hunter@intel.com
|
|
throttling
amd_pmu_enable_all() does:
if (!test_bit(idx, cpuc->active_mask))
continue;
amd_pmu_enable_event(cpuc->events[idx]);
A perf NMI of another event can come between these two steps. Perf NMI
handler internally disables and enables _all_ events, including the one
which nmi-intercepted amd_pmu_enable_all() was in process of enabling.
If that unintentionally enabled event has very low sampling period and
causes immediate successive NMI, causing the event to be throttled,
cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop().
This will result in amd_pmu_enable_event() getting called with event=NULL
when amd_pmu_enable_all() resumes after handling the NMIs. This causes a
kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000198
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
[...]
Call Trace:
<TASK>
amd_pmu_enable_all+0x68/0xb0
ctx_resched+0xd9/0x150
event_function+0xb8/0x130
? hrtimer_start_range_ns+0x141/0x4a0
? perf_duration_warn+0x30/0x30
remote_function+0x4d/0x60
__flush_smp_call_function_queue+0xc4/0x500
flush_smp_call_function_queue+0x11d/0x1b0
do_idle+0x18f/0x2d0
cpu_startup_entry+0x19/0x20
start_secondary+0x121/0x160
secondary_startup_64_no_verify+0xe5/0xeb
</TASK>
amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler
were recently added as part of BRS enablement but I'm not sure whether
we really need them. We can just disable BRS in the beginning and enable
it back while returning from NMI. This will solve the issue by not
enabling those events whose active_masks are set but are not yet enabled
in hw pmu.
Fixes: ada543459cab ("perf/x86/amd: Add AMD Fam19h Branch Sampling support")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221114044029.373-1-ravi.bangoria@amd.com
|
|
Shang XiaoJing says:
====================
net: microchip: Fix potential null-ptr-deref due to create_singlethread_workqueue()
There are some functions call create_singlethread_workqueue() without
checking ret value, and the NULL workqueue_struct pointer may causes
null-ptr-deref. Will be fixed by this patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
and sparx5_start()
sparx_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:
sparx_stats_init()
create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL. So as
sparx5_start().
Fixes: af4b11022e2d ("net: sparx5: add ethtool configuration and statistics support")
Fixes: b37a1bae742f ("net: sparx5: add mactable support")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lan966x_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:
lan966x_stats_init()
create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
Fixes: 12c2d0a5b8e2 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There were several updates in the driver on how the workarounds are
handled since its documentation was written. Update the documentation to
reflect the current reality.
v2:
- Remove footnote that was wrongly referenced, adding back the
reference in the correct paragraph.
- Remove "Display workarounds" and just mention "display IP" under
"Other" category since all of them are peppered around the driver.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> # v1
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115192611.179981-1-lucas.demarchi@intel.com
|
|
Add module parameters to allow setting the hw_rfkill_switch and
set_fn_lock_led feature flags for testing these on laptops which are not
on the DMI-id based allow lists for these 2 flags.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221115193400.376159-1-hdegoede@redhat.com
|
|
Yoga laptops
Commit 3ae86d2d4704 ("platform/x86: ideapad-laptop: Fix Legion 5 Fn lock
LED") uses the WMI event-id for the fn-lock event on some Legion 5 laptops
to manually toggle the fn-lock LED because the EC does not do it itself.
However, the same WMI ID is also sent on some Yoga laptops. Here, setting
the fn-lock state is not valid behavior, and causes the EC to spam
interrupts until the laptop is rebooted.
Add a set_fn_lock_led_list[] DMI-id list and only enable the workaround to
manually set the LED on models on this list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212671
Cc: Meng Dong <whenov@gmail.com>
Signed-off-by: Arnav Rawat <arnavr3@illinois.edu>
Link: https://lore.kernel.org/r/12093851.O9o76ZdvQC@fedora
[hdegoede@redhat.com: Check DMI-id list only once and store the result]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Sometimes hp-wmi driver complains on system resume:
[ 483.116451] hp_wmi: Unknown event_id - 33 - 0x0
According to HP it's a feature called "HP Smart Experience App" and it's
safe to be ignored.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20221114073842.205392-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add device nodes to enable support for battery and charger status, the
ACPI platform profile, as well as internal HID devices (including
touchpad and keyboard) on the Surface Laptop 5.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221115231440.1338142-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
to_attr() in zonefs sysfs code is unused, which it causes a warning when
compiling with clang and W=1. Delete it to prevent the warning.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
|
|
When an IO error occurs, the function __zonefs_io_error() is used to
issue a zone report to obtain the latest zone information from the
device. This function gets a zone report for all zones used as storage
for a file, which is always 1 zone except for files representing
aggregated conventional zones.
The number of zones of a zone report for a file is calculated in
__zonefs_io_error() by doing a bit-shift of the inode i_zone_size field,
which is equal to or larger than the device zone size. However, this
calculation does not take into account that the last zone of a zoned
device may be smaller than the zone size reported by bdev_zone_sectors()
(which is used to set the bit shift size). As a result, if an error
occurs for an IO targetting such last smaller zone, the zone report will
ask for 0 zones, leading to an invalid zone report.
Fix this by using the fact that all files require a 1 zone report,
except if the inode i_zone_size field indicates a zone size larger than
the device zone size. This exception case corresponds to a mount with
aggregated conventional zones.
A check for this exception is added to the file inode initialization
during mount. If an invalid setup is detected, emit an error and fail
the mount (check contributed by Johannes Thumshirn).
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The return value of CIFSGetExtAttr is negative, should be checked
with -EOPNOTSUPP rather than EOPNOTSUPP.
Fixes: 64a5cfa6db94 ("Allow setting per-file compression via SMB2/3")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When changing dhchap secrets we need to release the old
secrets as well.
kmemleak complaint:
--
unreferenced object 0xffff8c7f44ed8180 (size 64):
comm "check", pid 7304, jiffies 4295686133 (age 72034.246s)
hex dump (first 32 bytes):
44 48 48 43 2d 31 3a 30 30 3a 4c 64 4c 4f 64 71 DHHC-1:00:LdLOdq
79 56 69 67 77 48 55 32 6d 5a 59 4c 7a 35 59 38 yVigwHU2mZYLz5Y8
backtrace:
[<00000000b6fc5071>] kstrdup+0x2e/0x60
[<00000000f0f4633f>] 0xffffffffc0e07ee6
[<0000000053006c05>] 0xffffffffc0dff783
[<00000000419ae922>] configfs_write_iter+0xb1/0x120
[<000000008183c424>] vfs_write+0x2be/0x3c0
[<000000009005a2a5>] ksys_write+0x5f/0xe0
[<00000000cd495c89>] do_syscall_64+0x38/0x90
[<00000000f2a84ac5>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Added a quirk to fix the Netac NV7000 SSD reporting duplicate NGUIDs.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiago Dias Ferreira <tiagodfer@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add patchwork URL for Kconfig and Kbuild.
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Remove Michal Marek from Kbuild maintainers as there is no response from him
since October 2017. Add an entry for Michal in CREDITS.
Michal, thanks for maintaining Kbuild for almost eight years!
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
As suggested by Nick, add Nathan and myself to Kbuild reviewers to share more
review responsibilities.
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
In the initial commit dc452a471dba ("net: dsa: introduce tagger-owned
storage for private and shared data"), we had a call to
tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at
tree teardown time.
There were problems with connecting to a switch tree as a whole, so this
got reworked to connecting to individual switches within the tree. In
this process, tag_ops->disconnect(ds) was made to be called only from
switch.c (cross-chip notifiers emitted as a result of dynamic tag proto
changes), but the normal driver teardown code path wasn't replaced with
anything.
Solve this problem by adding a function that does the opposite of
dsa_switch_setup_tag_protocol(), which is called from the equivalent
spot in dsa_switch_teardown(). The positioning here also ensures that we
won't have any use-after-free in tagging protocol (*rcv) ops, since the
teardown sequence is as follows:
dsa_tree_teardown
-> dsa_tree_teardown_master
-> dsa_master_teardown
-> unsets master->dsa_ptr, making no further packets match the
ETH_P_XDSA packet type handler
-> dsa_tree_teardown_ports
-> dsa_port_teardown
-> dsa_slave_destroy
-> unregisters DSA net devices, there is even a synchronize_net()
in unregister_netdevice_many()
-> dsa_tree_teardown_switches
-> dsa_switch_teardown
-> dsa_switch_teardown_tag_protocol
-> finally frees the tagger-owned storage
Fixes: 7f2973149c22 ("net: dsa: make tagging protocols connect to individual switches from a tree")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221114143551.1906361-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
x25_lapb_receive_frame() using skb_copy() to get a private copy of
skb, the new skb should be freed in the undersized/fragmented skb
error handling path. Otherwise there is a memory leak.
Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20221114110519.514538-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ag71xx_open()
If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up.
And if phylink_of_phy_connect() fails, nothing needs to be done.
Compile tested only.
Fixes: 892e09153fa3 ("net: ag71xx: port to phylink")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221114095549.40342-1-liujian56@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfx fixes from David Howells:
"Two fixes, affecting the functions that iterates over the pagecache
unmarking or unlocking pages after an op is complete:
- xas_for_each() loops must call xas_retry() first thing and
immediately do a "continue" in the case that the extracted value is
a special value that indicates that the walk raced with a
modification. Fix the unlock and unmark loops to do this.
- The maths in the unlock loop is dodgy as it could, theoretically,
at some point in the future end up with a starting file pointer
that is in the middle of a folio. This will cause a subtraction to
go negative - but the number is unsigned. Fix the maths to use
absolute file positions instead of relative page indices"
* tag 'netfs-fixes-20221115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Fix dodgy maths
netfs: Fix missing xas_retry() calls in xarray iteration
|
|
Current dual mode adaptor ("DP++") detection code assumes that all
adaptors support i2c sub-addressing for read operations from the
DP-HDMI adaptor ID buffer. It has been observed that multiple
adaptors do not in fact support this, and always return data starting
at register 0. On affected adaptors, the code fails to read the proper
registers that would identify the device as a type 2 adaptor, and
handles those as type 1, limiting the TMDS clock to 165MHz, even if
the according register would announce a higher TMDS clock.
Fix this by always reading the ID buffer starting from offset 0, and
discarding any bytes before the actual offset of interest.
We tried finding authoritative documentation on whether or not this is
allowed behaviour, but since all the official VESA docs are paywalled,
the best we could come up with was the spec sheet for Texas Instruments'
SNx5DP149 chip family.[1] It explicitly mentions that sub-addressing is
supported for register writes, but *not* for reads (See NOTE in
section 8.5.3). Unless TI openly decided to violate the VESA spec, one
could take that as a hint that sub-addressing is in fact not mandated
by VESA.
The other two adaptors affected used the PS8409(A) and the LT8611,
according to the data returned from their ID buffers.
[1] https://www.ti.com/lit/ds/symlink/sn75dp149.pdf
Cc: stable@vger.kernel.org
Signed-off-by: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
Reviewed-by: Rafael Gieschke <rafael.gieschke@rz.uni-freiburg.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006113314.41101987@computer
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
