summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-15net: phy: marvell: add sleep time after enabling the loopback bitAminuddin Jamaluddin
Sleep time is added to ensure the phy to be ready after loopback bit was set. This to prevent the phy loopback test from failing. Fixes: 020a45aff119 ("net: phy: marvell: add Marvell specific PHY loopback") Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Aminuddin Jamaluddin <aminuddin.jamaluddin@intel.com> Link: https://lore.kernel.org/r/20221114065302.10625-1-aminuddin.jamaluddin@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-15net: ena: Fix error handling in ena_init()Yuan Can
The ena_init() won't destroy workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20221114025659.124726-1-yuancan@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-15kcm: close race conditions on sk_receive_queueCong Wang
sk->sk_receive_queue is protected by skb queue lock, but for KCM sockets its RX path takes mux->rx_lock to protect more than just skb queue. However, kcm_recvmsg() still only grabs the skb queue lock, so race conditions still exist. We can teach kcm_recvmsg() to grab mux->rx_lock too but this would introduce a potential performance regression as struct kcm_mux can be shared by multiple KCM sockets. So we have to enforce skb queue lock in requeue_rx_msgs() and handle skb peek case carefully in kcm_wait_data(). Fortunately, skb_recv_datagram() already handles it nicely and is widely used by other sockets, we can just switch to skb_recv_datagram() after getting rid of the unnecessary sock lock in kcm_recvmsg() and kcm_splice_read(). Side note: SOCK_DONE is not used by KCM sockets, so it is safe to get rid of this check too. I ran the original syzbot reproducer for 30 min without seeing any issue. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+278279efdd2730dd14bf@syzkaller.appspotmail.com Reported-by: shaozhengchao <shaozhengchao@huawei.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20221114005119.597905-1-xiyou.wangcong@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-15platform/x86/amd: pmc: Remove more CONFIG_DEBUG_FS checksMario Limonciello
commit b37fe34c8309 ("platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks") removed most CONFIG_DEBUG_FS checks, but there were some left that were reported to cause compile test failures. Remove the remaining checks, and also the unnecessary CONFIG_SUSPEND used in the same place. Reported-by: liyupeng@zbhlos.com Fixes: b37fe34c8309 ("platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216679 Link: https://lore.kernel.org/r/20221108023323.19304-1-mario.limonciello@amd.com Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-15USB: serial: option: add Fibocom FM160 0x0111 compositionReinhard Speyerer
Add support for the following Fibocom FM160 composition: 0x0111: MBIM + MODEM + DIAG + AT T: Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0111 Rev= 5.04 S: Manufacturer=Fibocom S: Product=Fibocom FM160 Modem_SN:12345678 S: SerialNumber=12345678 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-15nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron NitroBean Huo
Added a quirk to fix Micron Nitro NVMe reporting duplicate NGUIDs. Cc: <stable@vger.kernel.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-11-15drm/connector: Add pixel clock to cmdline modeMaxime Ripard
We'll need to get the pixel clock to generate proper display modes for all the current named modes. Let's add it to struct drm_cmdline_mode and fill it when parsing the named mode. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-12-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/modes: Fill drm_cmdline mode from named modesMaxime Ripard
The current code to deal with named modes will only set the mode name, and then it's up to drivers to try to match that name to whatever mode or configuration they see fit. The plan is to remove that need and move the named mode handling out of drivers and into the core, and only rely on modes and properties. Let's start by properly filling drm_cmdline_mode from a named mode. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-11-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/modes: Switch to named mode descriptorsMaxime Ripard
The current named mode parsing relies only on the mode name, and doesn't allow to specify any other parameter. Let's convert that string list to an array of a custom structure that will hold the name and some additional parameters in the future. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-10-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/modes: Move named modes parsing to a separate functionMaxime Ripard
The current construction of the named mode parsing doesn't allow to extend it easily. Let's move it to a separate function so we can add more parameters and modes. In order for the tests to still pass, some extra checks are needed, so it's not a 1:1 move. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-9-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/client: Add some tests for drm_connector_pick_cmdline_mode()Maxime Ripard
drm_connector_pick_cmdline_mode() is in charge of finding a proper drm_display_mode from the definition we got in the video= command line argument. Let's add some unit tests to make sure we're not getting any regressions there. Acked-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-8-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/tests: Add Kunit HelpersMaxime Ripard
As the number of kunit tests in KMS grows further, we start to have multiple test suites that, for example, need to register a mock DRM driver to interact with the KMS function they are supposed to test. Let's add a file meant to provide those kind of helpers to avoid duplication. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-2-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15docs/fb: Document current named modesMaxime Ripard
KMS supports a number of named modes already, but it's never been documented anywhere, let's fix that. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-1-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/vc4: hdmi: Fix pointer dereference before checkJosé Expósito
Commit 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug") introduced the vc4_hdmi_reset_link() function. This function dereferences the "connector" pointer before checking whether it is NULL or not. Rework variable assignment to avoid this issue. Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20221110134752.238820-3-jose.exposito89@gmail.com Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/vc4: hdmi: Pass vc4_hdmi to vc4_hdmi_supports_scrambling()José Expósito
Simplify vc4_hdmi_supports_scrambling() by changing its first parameter from struct drm_encoder to struct vc4_hdmi. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20221110134752.238820-2-jose.exposito89@gmail.com Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15pinctrl: mediatek: Export debounce time tablesLinus Walleij
The kernel test robot complains that in certain combinations when building the Mediatek drivers as modules we lack some debounce table symbols, so export them. Reported-by: kernel test robot <lkp@intel.com> Fixes: e1ff91f9d230 ("pinctrl: mediatek: Fix EINT pins input debounce time configuration") Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-15Merge tag 'drm-next-20221109' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
- Renesas RZ/G2L DSI support - Renesas DU Kconfig cleanup - Xilinx DPSUB fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y2u+mhkPJQ4de3q5@pendragon.ideasonboard.com
2022-11-14Documentation/gpu: Fix section in the wrong scopeLucas De Marchi
That section should still be inside "DRM client usage stats" rather than as a sibling. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107173209.2219571-2-lucas.demarchi@intel.com
2022-11-15xen/platform-pci: use define instead of literal numberJuergen Gross
Instead of "0x01" use the HVM_PARAM_CALLBACK_TYPE_PCI_INTX define from the interface header in get_callback_via(). Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-11-15MAINTAINERS: git://github.com -> https://github.com for HiSiliconPalmer Dabbelt
Github deprecated the git:// links about a year ago, so let's move to the https:// URLs instead. Reported-by: Conor Dooley <conor.dooley@microchip.com> Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2022-11-14net: ionic: Fix error handling in ionic_init_module()Yuan Can
A problem about ionic create debugfs failed is triggered with the following log given: [ 415.799514] debugfs: Directory 'ionic' with parent '/' already present! The reason is that ionic_init_module() returns ionic_bus_register_driver() directly without checking its return value, if ionic_bus_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ionic can never be created later. ionic_init_module() ionic_debugfs_create() # create debugfs directory ionic_bus_register_driver() pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when ionic_bus_register_driver() returns error. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14mlxsw: Avoid warnings when not offloaded FDB entry with IPv6 is removedAmit Cohen
FDB entries that perform VXLAN encapsulation with an IPv6 underlay hold a reference on a resource - the KVDL entry where the IPv6 underlay destination IP is stored. For that, the driver maintains two hash tables: 1. Maps IPv6 to KVDL index 2. Maps {MAC, FID index} to IPv6 address When a FDB entry is removed, the second table is used to find the relevant IPv6 address and the first table is used to remove the reference count and free the index if is not used anymore. In order for a packet to be forwarded to a single remote VTEP, FDB entries need to be configured at both the bridge and VXLAN devices' FDB tables. Both entries are squashed into one {MAC, VLAN/VNI} -> IP entry in the hardware. Therefore, in case one entry is removed, the entry will be removed from the hardware and the remaining entry will be unmarked with 'offload' flag since it is not offloaded anymore. For example, the two FDB entries should be added to allow packets to be forwarded via vx10: $ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff self static dst 2001:db8:5::1 $ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff master static vlan 10 When one entry will be removed, the second one will not be offloaded anymore. When the first entry (in VXLAN FDB) will be removed / will not be offloaded anymore, the two mappings in IPv6 hash tables will be removed. In case that the second entry is removed before the first one, unexpected warnings[1][2] will be shown in user space as a result of removing the first entry. The issue is that not offloaded entry is removed, the driver tries to search the relevant entries in the hash tables, does not find them and therefore warns. Do not handle removing of not offloaded VXLAN FDB entries, as they were already removed when the offload flag was removed. [1]: WARNING: CPU: 1 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c:914 mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum] ... Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum] ... Call Trace: <TASK> mlxsw_sp_port_fdb_tunnel_uc_op+0x6cf/0x7b0 [mlxsw_spectrum] mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum] ? finish_task_switch.isra.0+0x8c/0x290 process_one_work+0x1cd/0x390 worker_thread+0x48/0x3c0 ? process_one_work+0x390/0x390 kthread+0xe0/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> [2]: WARNING: CPU: 0 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3035 mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum] ... Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum] ... Call Trace: <TASK> ? mlxsw_sp_port_fdb_tun_uc_op6_sfd_write+0x5c1/0x610 [mlxsw_spectrum] mlxsw_sp_port_fdb_tunnel_uc_op+0x6ec/0x7b0 [mlxsw_spectrum] mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum] ? finish_task_switch.isra.0+0x8c/0x290 process_one_work+0x1cd/0x390 worker_thread+0x48/0x3c0 ? process_one_work+0x390/0x390 kthread+0xe0/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 0860c7641634 ("mlxsw: spectrum_nve: Keep track of IPv6 addresses used by FDB entries") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/c186de8cbd28e3eb661e06f31f7f2f2dff30020f.1668184350.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14drm/edid: Dump the EDID when drm_edid_get_panel_id() has an errorDouglas Anderson
If we fail to get a valid panel ID in drm_edid_get_panel_id() we'd like to see the EDID that was read so we have a chance of understanding what's wrong. There's already a function for that, so let's call it in the error case. NOTE: edid_block_read() has a retry loop in it, so actually we'll only print the block read back from the final attempt. This still seems better than nothing. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221021130637.1.I8c2de0954a4e54e0c59a72938268e2ead91daa98@changeid
2022-11-14Merge tag 'vfio-v6.1-rc6' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - Fixes for potential container registration leak for drivers not implementing a close callback, duplicate container de-registrations, and a regression in support for bus reset on last device close from a device set (Anthony DeRossi) * tag 'vfio-v6.1-rc6' of https://github.com/awilliam/linux-vfio: vfio/pci: Check the device set open count on reset vfio: Export the device set open count vfio: Fix container device registration life cycle
2022-11-14Merge tag 'mtd/fixes-for-6.1-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: - Placate "$VARIABLE is used uninitialized" warnings - omap2: Add missing dependency on GPMC - qcom: Handle ret from parse with codeword_fixup * tag 'mtd/fixes-for-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: onenand: omap2: add dependency on GPMC mtd: rawnand: placate "$VARIABLE is used uninitialized" warnings mtd: rawnand: qcom: handle ret from parse with codeword_fixup
2022-11-14Merge drm/drm-next into drm-intel-nextRodrigo Vivi
Catch up on 6.1-rc cycle in order to solve the intel_backlight conflict on linux-next. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-11-14blk-cgroup: properly pin the parent in blkcg_css_onlineChris Mason
blkcg_css_online is supposed to pin the blkcg of the parent, but 397c9f46ee4d refactored things and along the way, changed it to pin the css instead. This results in extra pins, and we end up leaking blkcgs and cgroups. Fixes: 397c9f46ee4d ("blk-cgroup: move blkcg_{pin,unpin}_online out of line") Signed-off-by: Chris Mason <clm@fb.com> Spotted-by: Rik van Riel <riel@surriel.com> Cc: <stable@vger.kernel.org> # v5.19+ Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/r/20221114181930.2093706-1-clm@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-14drm/i915/guc: handle interrupts from media GuCDaniele Ceraolo Spurio
The render and media GuCs share the same interrupt enable register, so we can no longer disable interrupts when we disable communication for one of the GuCs as this would impact the other GuC. Instead, we keep the interrupts always enabled in HW and use a variable in the GuC structure to determine if we want to service the received interrupts or not. v2: use MTL_ prefix for reg definition (Matt) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-7-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/guc: define media GT GuC send regsDaniele Ceraolo Spurio
The media GT shares the G-unit with the root GT, so a second set of communication registers is required for the media GuC. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-6-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/mtl: Handle wopcm per-GT and limit calculations.Aravind Iddamsetty
With MTL standalone media architecture the wopcm layout has changed, with separate partitioning in WOPCM for the root GT GuC and the media GT GuC. The size of WOPCM is 4MB with the lower 2MB reserved for the media GT and the upper 2MB for the root GT. Given that MTL has GuC deprivilege, the WOPCM registers are pre-locked by the bios. Therefore, we can skip all the math for the partitioning and just limit ourselves to sanity-checking the values. v2: fix makefile file ordering (Jani) v3: drop XELPM_SAMEDIA_WOPCM_SIZE, check huc instead of VDBOX (John) v4: further clarify commit message, remove blank line (John) Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-5-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/guc: Add GuC deprivilege feature to MTLStuart Summers
MTL supports GuC deprivilege. Add the feature flag to this platform. Signed-off-by: Stuart Summers <stuart.summers@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-4-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/uc: use different ggtt pin offsets for uc loadsDaniele Ceraolo Spurio
Our current FW loading process is the same for all FWs: - Pin FW to GGTT at the start of the ggtt->uc_fw node - Load the FW - Unpin This worked because we didn't have a case where 2 FWs would be loaded on the same GGTT at the same time. On MTL, however, this can happen if both GTs are reset at the same time, so we can't pin everything in the same spot and we need to use separate offset. For simplicity, instead of calculating the exact required size, we reserve a 2MB slot for each fw. v2: fail fetch if FW is > 2MBs, improve comments (John) v3: more comment improvements (John) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-3-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/uc: fetch uc firmwares for each GTDaniele Ceraolo Spurio
The FW binaries are independently loaded on each GT. On MTL, the memory is shared so we could potentially re-use a single allocation, but on discrete multi-gt platforms we are going to need independent copies, so it is easier to do the same on MTL as well, given that the amount of duplicated memory is relatively small (~500K). Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-2-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/huc: only load HuC on GTs that have VCS enginesDaniele Ceraolo Spurio
On MTL the primary GT doesn't have any media capabilities, so no video engines and no HuC. We must therefore skip the HuC fetch and load on that specific case. Given that other multi-GT platforms might have HuC on the primary GT, we can't just check for that and it is easier to instead check for the lack of VCS engines. Based on code from Aravind Iddamsetty v2: clarify which engine_mask is used for each GT and why (Tvrtko) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-1-daniele.ceraolospurio@intel.com
2022-11-14erofs: fix missing xas_retry() in fscache modeJingbo Xu
The xarray iteration only holds the RCU read lock and thus may encounter XA_RETRY_ENTRY if there's process modifying the xarray concurrently. This will cause oops when referring to the invalid entry. Fix this by adding the missing xas_retry(), which will make the iteration wind back to the root node if XA_RETRY_ENTRY is encountered. Fixes: d435d53228dd ("erofs: change to use asynchronous io for fscache readpage/readahead") Suggested-by: David Howells <dhowells@redhat.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com> Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com> Link: https://lore.kernel.org/r/20221114121943.29987-1-jefflexu@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2022-11-14NFSD: Fix trace_nfsd_fh_verify_err() crasherChuck Lever
Now that the nfsd_fh_verify_err() tracepoint is always called on error, it needs to handle cases where the filehandle is not yet fully formed. Fixes: 93c128e709ae ("nfsd: ensure we always call fh_verify_error tracepoint") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2022-11-14pinctrl: mediatek: Fix EINT pins input debounce time configurationAngeloGioacchino Del Regno
The External Interrupt Controller (EINTC) on all of the supported MediaTek SoCs does support input debouncing, but not all of them index the debounce time values (DBNC_SETTING registers) the same way. Before this change, in some cases, as an example, requesting a debounce time of 16 milliseconds would mistakenly set the relative DBNC_SETTING register to 0x2, resulting in a way shorter debounce time of 500uS. To fix the aforementioned issue, define three different debounce_time arrays, reflecting the correct register index for each value and for each register index variant, and make sure that each SoC pinctrl driver uses the right one. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221111094106.18486-1-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-14drm/gem-vram: Fix deadlock in drm_gem_vram_vmap()Dmitry Osipenko
Recently DRM framebuffer core and all drivers were moved to unlocked vmapping functions that take the reservation lock. The drm_gem_vram_vmap() was missed out by accident and now deadlocks drivers that use drm_gem_vram helpers when framebuffer is updated, like Bochs driver. Remove the locking from drm_gem_vram_v[un]map() functions to fix the deadlock. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 79e2cf2e7a19 ("drm/gem: Take reservation lock for vmap/vunmap operations") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221113233850.427704-1-dmitry.osipenko@collabora.com
2022-11-14xen/platform-pci: add missing free_irq() in error pathruanjinjie
free_irq() is missing in case of error in platform_pci_probe(), fix that. Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Link: https://lore.kernel.org/r/20221114112124.1965611-1-ruanjinjie@huawei.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-11-14xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL tooMarek Marczykowski-Górecki
When Xen domain configures MSI-X, the usual approach is to enable MSI-X together with masking all of them via the config space, then fill the table and only then clear PCI_MSIX_FLAGS_MASKALL. Allow doing this via QEMU running in a stub domain. Previously, when changing PCI_MSIX_FLAGS_MASKALL was not allowed, the whole write was aborted, preventing change to the PCI_MSIX_FLAGS_ENABLE bit too. Note the Xen hypervisor intercepts this write anyway, and may keep the PCI_MSIX_FLAGS_MASKALL bit set if it wishes to. It will store the guest-requested state and will apply it eventually. Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20221114103110.1519413-1-marmarek@invisiblethingslab.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-11-14xen/pcpu: fix possible memory leak in register_pcpu()Yang Yingliang
In device_add(), dev_set_name() is called to allocate name, if it returns error, the name need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). Fixes: f65c9bb3fb72 ("xen/pcpu: Xen physical cpus online/offline sys interface") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20221110152441.401630-1-yangyingliang@huawei.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-11-14x86/xen: Use kstrtobool() instead of strtobool()Christophe JAILLET
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/e91af3c8708af38b1c57e0a2d7eb9765dda0e963.1667336095.git.christophe.jaillet@wanadoo.fr Signed-off-by: Juergen Gross <jgross@suse.com>
2022-11-14arm64: ftrace: Define ftrace_stub_graph only with FUNCTION_GRAPH_TRACERSami Tolvanen
The 0-day bot reports that arm64 builds with CONFIG_CFI_CLANG + CONFIG_FTRACE are broken when CONFIG_FUNCTION_GRAPH_TRACER is not enabled: ld.lld: error: undefined symbol: __kcfi_typeid_ftrace_stub_graph >>> referenced by entry-ftrace.S:299 (arch/arm64/kernel/entry-ftrace.S:299) >>> arch/arm64/kernel/entry-ftrace.o:(.text+0x48) in archive vmlinux.a This is caused by ftrace_stub_graph using SYM_TYPE_FUNC_START when the address of the function is not taken in any C translation unit. Fix the build by only defining ftrace_stub_graph when it's actually needed, i.e. with CONFIG_FUNCTION_GRAPH_TRACER. Link: https://lore.kernel.org/lkml/202210251659.tRMs78RH-lkp@intel.com/ Fixes: 883bbbffa5a4 ("ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20221109192831.3057131-1-samitolvanen@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-11-14drm/panel: Add NewVision NV3051D MIPI-DSI LCD panelChris Morgan
Support NewVision NV3051D panels as found on the Anbernic RG353P and RG353V. The underlying LCD part number for the RG353x devices is unknown, so the device name and a fallback for the driver IC is used instead. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> [Fixed checkpatch moan about parens] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221111203130.9615-4-macroalpha82@gmail.com
2022-11-14dt-bindings: display: panel: Add NewVision NV3051D bindingsChris Morgan
Add documentation for the NewVision NV3051D panel bindings. Note that for the two expected consumers of this panel binding the underlying LCD model is unknown. Name "anbernic,rg353p-panel" is used because the hardware itself is known as "anbernic,rg353p". Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221111203130.9615-3-macroalpha82@gmail.com
2022-11-14dt-bindings: vendor-prefixes: add NewVision vendor prefixChris Morgan
NewVision (also sometimes written as New Vision) is a company based in Shenzen that manufactures ICs for controlling LCD panels. https://www.newvisiondisplay.com/ Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221111203130.9615-2-macroalpha82@gmail.com
2022-11-14drm/i915: Simplify internal helper function signatureTvrtko Ursulin
Since we are now storing the GT backpointer in the wa list we can drop the explicit struct intel_gt * argument to wa_list_apply. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221110124633.3135026-1-tvrtko.ursulin@linux.intel.com
2022-11-14net: dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shimsVladimir Oltean
There are multi-generational drivers like mv88e6xxx which have code like this: int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) { if (!chip->info->ptp_support) return -EOPNOTSUPP; ... } DSA wants to deny PTP timestamping on the master if the switch supports timestamping too. However it currently relies on the presence of the port_hwtstamp_get() callback to determine PTP capability, and this clearly does not work in that case (method is present but returns -EOPNOTSUPP). We should not deny PTP on the DSA master for those switches which truly do not support hardware timestamping. Create a dsa_port_supports_hwtstamp() method which actually probes for support by calling port_hwtstamp_get() and seeing whether that returned -EOPNOTSUPP or not. Fixes: f685e609a301 ("net: dsa: Deny PTP on master if switch supports it") Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221110124345.3901389-1-festevam@gmail.com/ Reported-by: Fabio Estevam <festevam@gmail.com> Reported-by: Steffen Bätz <steffen@innosonix.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Fabio Estevam <festevam@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-14drm/i915/mtl: Add Wa_14017073508 for SAMediaBadal Nilawar
This workaround is added for Media tile of MTL A step. It is to help pcode workaround which handles the hardware issue seen during package C2/C3 transitions due to RC6 entry/exit transitions on Media tile. As a part of workaround pcode expect kmd to send mailbox message "media busy" when components of Media tile are in use and "media idle" otherwise. As per workaround description gucrc need to be disabled so enabled host based RC for Media tile. v2: - Correct workaround id (Matt) - Fix review comments (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103184559.2306481-1-badal.nilawar@intel.com
2022-11-14net: mhi: Fix memory leak in mhi_net_dellink()Wei Yongjun
MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch calls free_netdev() to fix it since netdev_priv is used after unregister. Fixes: 13adac032982 ("net: mhi_net: Register wwan_ops for link creation") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 17:57:13 +0000