| Age | Commit message (Collapse) | Author |
|---|
|
Add a compatible string for the interrupt controller found on the
rtl930x SoCs. The interrupt controller has registers for VPE1 so these
are added as a second reg cell.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add the rtl9302 SoC and the Cameo RTL9302C_2xRTL8224_2XGE reference
board to the list of Realtek compatible strings.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add entry for Cameo Communications (https://www.cameo.com.tw/)
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add device_type = "cpu" to the cpu node for the rtl838x SoC. This
resolves the following dtbs_check complaint:
cpus: cpu@0: 'cache-level' is a required property
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Update the node name for the UARTs to resolve the following dtbs_check
complaints:
uart@2000: $nodename:0: 'uart@2000' does not match '^serial(@.*)?$'
uart@2100: $nodename:0: 'uart@2100' does not match '^serial(@.*)?$'
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Implement ieee754 NAN2008 emulation mode.
When this mode is enabled, kernel will accept ELF file
compiled for both NaN 2008 and NaN legacy, but if hardware
does not have capability to match ELF's NaN mode, __own_fpu
will fail for corresponding thread and fpuemu will then kick
in.
This mode trade performance for correctness, while maintaining
support for both NaN mode regardless of hardware capability.
It is useful for multilib installation that have both types
of binary exist in system.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This adds code to initialize the USB controller and PHY also on Danube,
Amazon SE and AR10. This code is based on the Vendor driver from
different UGW versions and compared to the hardware documentation.
This patch is included in OpenWrt for many years.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
RISC-V code uses the generic ticket lock implementation, which calls
the macros smp_cond_load_relaxed() and smp_cond_load_acquire().
Introduce a RISC-V specific implementation of smp_cond_load_relaxed()
which applies WRS.NTO of the Zawrs extension in order to reduce power
consumption while waiting and allows hypervisors to enable guests to
trap while waiting. smp_cond_load_acquire() doesn't need a RISC-V
specific implementation as the generic implementation is based on
smp_cond_load_relaxed() and smp_acquire__after_ctrl_dep() sufficiently
provides the acquire semantics.
This implementation is heavily based on Arm's approach which is the
approach Andrea Parri also suggested.
The Zawrs specification can be found here:
https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Co-developed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240426100820.14762-11-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add description for the Zawrs (Wait-on-Reservation-Set) ISA extension
which was ratified in commit 98918c844281 of riscv-isa-manual.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240426100820.14762-10-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If we're going to provide the encoding for 'pause' in cpu_relax()
anyway, then we can drop the toolchain checks and just always use
it. The advantage of doing this is that other code that need
pause don't need to also define it (yes, another use is coming).
Add the definition to insn-def.h since it's an instruction
definition and also because insn-def.h doesn't include much, so
it's safe to include from asm/vdso/processor.h without concern for
circular dependencies.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240426100820.14762-9-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
There are many generations of omaps to maintain, and I will be only active
as a hobbyist with time permitting. Let's add more maintainers to ensure
continued Linux support.
TI is interested in maintaining the active SoCs such as am3, am4 and
dra7. And the hobbyists are interested in maintaining some of the older
devices, mainly based on omap3 and 4 SoCs.
Kevin and Roger have agreed to maintain the active TI parts. Both Kevin
and Roger have been working on the omap variants for a long time, and
have a good understanding of the hardware.
Aaro and Andreas have agreed to maintain the community devices. Both Aaro
and Andreas have long experience on working with the earlier TI SoCs.
While at it, let's also change me to be a reviewer for the omap1, and
drop the link to my old omap web page.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With the introduction of binder_available_for_proc_work_ilocked() in
commit 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue") a binder
thread can only "wait_for_proc_work" after its thread->looper has been
marked as BINDER_LOOPER_STATE_{ENTERED|REGISTERED}.
This means an unregistered reader risks waiting indefinitely for work
since it never gets added to the proc->waiting_threads. If there are no
further references to its waitqueue either the task will hang. The same
applies to readers using the (e)poll interface.
I couldn't find the rationale behind this restriction. So this patch
restores the previous behavior of allowing unregistered threads to
"wait_for_proc_work". Note that an error message for this scenario,
which had previously become unreachable, is now re-enabled.
Fixes: 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue")
Cc: stable@vger.kernel.org
Cc: Martijn Coenen <maco@google.com>
Cc: Arve Hjønnevåg <arve@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240711201452.2017543-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'sdhci-esdhc-imx' driver
Since NXP S32G2 and S32G3 SoCs share the SDHCI controller with
I.MX platforms it would be valuable to add 's32@nxp.com' as a
relevant mailing list in this area.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20240708121018.246476-4-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The I.MX SDHCI driver assumes that the frequency of the 'per' clock
can be obtained even on disabled clocks, which is not always the case.
According to 'clk_get_rate' documentation, it is only valid
once the clock source has been enabled.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-3-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In case of S32G based platforms, GPIO CD used for card detect
wake mechanism is not available.
For this scenario the newly introduced flag
'ESDHC_FLAG_SKIP_CD_WAKE' is used.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Lenovo Yoga C630 Embedded Controller is only present on the Qualcomm
Snapdragon-based Lenovo Yoga C630 laptop. Hence add a dependency on
ARCH_QCOM, to prevent asking the user about this driver when configuring
a kernel without Qualcomm SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/0e4c9ffdc8a5caffcda2afb8d5480900f7adebf6.1720707932.git.geert+renesas@glider.be
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Log errors are the most widely used mechanism for reporting issues in
the kernel. When an error is logged using the device helpers, eg
dev_err(), it gets metadata attached that identifies the subsystem and
device where the message is coming from. Introduce a new test that makes
use of that metadata to report which devices logged errors (or more
critical messages).
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240705-dev-err-log-selftest-v2-3-163b9cd7b3c1@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the ksft python module, which provides generic helpers for
kselftests, to a common directory so it can be more easily shared
between different tests.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240705-dev-err-log-selftest-v2-2-163b9cd7b3c1@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the discoverable devices test to a subdirectory to allow other
related tests to be added to the devices directory.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240705-dev-err-log-selftest-v2-1-163b9cd7b3c1@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Acer Aspire 1 Embedded Controller is only present on the Qualcomm
Snapdragon-based Acer Aspire 1 laptop. Hence add a dependency on
ARCH_QCOM, to prevent asking the user about this driver when configuring
a kernel without Qualcomm SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/f5f38709c01d369ed9e375ceb2a9a12986457a1a.1720707932.git.geert+renesas@glider.be
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
DPI hardware is an on-chip PCIe device on Marvell's arm64 SoC
platforms. As Arnd suggested, CN10K belongs to ARCH_THUNDER
lineage.
Patch makes mrvl_cn10k_dpi driver dependent on CONFIG_ARCH_THUNDER.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Link: https://lore.kernel.org/r/20240711120115.4069401-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio_dma_buf.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-virtio_dma_buf-v1-1-ce602d47e257@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/uninorth-agp.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-powerpc-drivers-char-agp-v1-1-b79bfd07da42@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/hisi-spmi-controller.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/spmi-pmic-arb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240609-md-drivers-spmi-v1-1-f1d5b24e7a66@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The remove callback's return value is about to change from int to void,
this is done by commit 0edb555a65d1 ("platform: Make
platform_driver::remove() return void"). Prepare for merging the patch by
switching the PiSP driver from remove to remove_new callback.
Fixes: 12187bd5d4f8 ("media: raspberrypi: Add support for PiSP BE")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Complete the pisp_be_config strcture by adding fields that even if not
written to the HW are relevant to complete the uAPI and put it in par
with the BSP driver.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The order of the members of pisp_be_tiles_config is relevant
as the driver logic assumes 'config' to be at offset 0.
Re-sort the member to match the driver's expectations.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The macro used to inspect an image format characteristic use a mixture
of capitalized and non-capitalized letters, which is rather unusual for
the Linux kernel style.
Capitalize all identifiers.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add definition and test for 32-bits image formats to the pisp_common.h
uAPI header.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The pisp_be_config.h uAPI header file contains a bit-field definition
that uses the BIT() helper macro.
As the BIT() identifier is not defined in userspace, drop it from the
uAPI header.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
While efi_memory_attributes_table_t::entry isn't used directly as an
array, it is used as a base for pointer arithmetic. The type is wrong
as it's not technically an array of efi_memory_desc_t's; they could be
larger. Regardless, leave the type unchanged and remove the old style
"0" array size. Additionally replace the open-coded entry offset code
with the existing efi_memdesc_ptr() helper.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The "early" part of the helper's name isn't accurate[1]. Drop it in
preparation for adding a new (not early) usage.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/lkml/CAMj1kXEyDjH0uu3Z4eBesV3PEnKGi5ArXXMp7R-hn8HdRytiPg@mail.gmail.com [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Documentation say that clock internal config needs to be set BEFORE chip
is enabled. Align code to this and move the CHIP enable after the CHIP
is configured.
While at it also make use of STATUS reg and check when STARTUP is
completed instead of sleep for 1-2 ms.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240712004556.15601-3-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Better handle enabling clock internal setting. In further testing it was
notice that internal clock config MUST be set before clock output config
or the LED CHIP might stop working.
This wasn't documented and was actually found on devices that have 2
chip chained where one chip provide clock for the other.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240712004556.15601-2-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove extra x from driver name as this was a typo from copy-paste
error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240712004556.15601-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit 9a427556fb8e ("vmlinux.lds.h: catch compound literals into
data and BSS") added catches for .data..L* and .rodata..L* but missed
.bss..L*
Since commit 5431fdd2c181 ("ptrace: Convert ptrace_attach() to use
lock guards") the following appears at build:
LD .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
Lets add .bss..L* to BSS_MAIN macro to catch those sections into BSS.
Fixes: 9a427556fb8e ("vmlinux.lds.h: catch compound literals into data and BSS")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404031349.nmKhyuUG-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The to-be-fixed commit rightfully prevented that the registers will be
cleared. However, the index must be cleared. Otherwise a read message
will re-issue the last work. Fix it and add a comment describing the
situation.
Fixes: c422b6a63024 ("i2c: testunit: don't erase registers after STOP")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
esp_xmit() is already able to handle UDP encapsulation through the call to
esp_output_head(). However, the ESP header and the outer IP header
are not correct and need to be corrected.
Test: Enabled both dir=in/out IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If xfrm_input() is called with UDP_ENCAP_ESPINUDP, the packet is
already processed in UDP layer that removes the UDP header.
Therefore, there should be no much difference to treat it as an
ESP packet in the XFRM stack.
Test: Enabled dir=in IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Unblock this limitation so that SAs with encapsulation specified
can be passed to HW drivers. HW drivers can still reject the SA
in their implementation of xdo_dev_state_add if the encapsulation
is not supported.
Test: Verified on Android device
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
IPsec crypt offload supports outbound IPv6 ESP packets, but it doesn't
support inbound IPv6 ESP packets.
This change enables the crypto offload for inbound IPv6 ESP packets
that are not handled through GRO code path. If HW drivers add the
offload information to the skb, the packet will be handled in the
crypto offload rx code path.
Apart from the change in crypto offload rx code path, the change
in xfrm_policy_check is also needed.
Exampe of RX data path:
+-----------+ +-------+
| HW Driver |-->| wlan0 |--------+
+-----------+ +-------+ |
v
+---------------+ +------+
+------>| Network Stack |-->| Apps |
| +---------------+ +------+
| |
| v
+--------+ +------------+
| ipsec1 |<--| XFRM Stack |
+--------+ +------------+
Test: Enabled both in/out IPsec crypto offload, and verified IPv6
ESP packets on Android device on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
block
It would be possible to put any statement in TP_fast_assign().
This commit obsoletes the helper function and put its statements to
TP_fast_assign() for the code simplicity.
Link: https://lore.kernel.org/r/20240712003010.87341-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-07-11:
amdgpu:
- PSR-SU fix
- Reseved VMID fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240712005534.803064-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Use write-back caching mode for system memory on DGFX (Thomas)
Driver Changes:
- Do not leak object when finalizing hdcp gsc (Nirmoy)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/vgqz35btnxdddko3byrgww5ii36wig2tvondg2p3j3b3ourj4i@rqgolll3wwkh
|
|
Prior to commit dc6fcaaba5a5 ("drm/omap: Allow build with
COMPILE_TEST=y"), it was only possible to build the omapdrm driver with
a 4KB page size. After that change, when the PAGE_SIZE is 64KB or
larger, clang points out that the driver has some assumptions around the
page size implicitly by passing PAGE_SIZE to a parameter with a type of
u16:
drivers/gpu/drm/omapdrm/omap_gem.c:758:7: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion]
757 | block = tiler_reserve_2d(fmt, omap_obj->width, omap_obj->height,
| ~~~~~~~~~~~~~~~~
758 | PAGE_SIZE);
| ^~~~~~~~~
arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE'
25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
| ~~~~~~~~~~~~~^~~~~~~~~~~~~
drivers/gpu/drm/omapdrm/omap_gem.c:1504:44: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion]
1504 | block = tiler_reserve_2d(fmts[i], w, h, PAGE_SIZE);
| ~~~~~~~~~~~~~~~~ ^~~~~~~~~
arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE'
25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
| ~~~~~~~~~~~~~^~~~~~~~~~~~~
2 errors generated.
As there is a lot of use of a u16 type throughout this driver and it
will only ever be run on hardware that has a 4KB page size, just
restrict compile testing to when the page size is less than 64KB (as no
other issues have been discussed and it keeps compile testing relatively
more available).
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620-omapdrm-restrict-compile-test-to-sub-64kb-page-size-v1-1-5e56de71ffca@kernel.org
|
|
When handling colliding L2TPv3 session IDs, we use the existing
session IDR entry and link the new session on that using
session->coll_list. However, when using an existing IDR entry, we must
not do the idr_replace step.
Fixes: aa5e17e1f5ec ("l2tp: store l2tpv3 sessions in per-net IDR")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Rename xe perf layer as xe observation layer (Ashutosh)
Driver Changes:
- Drop trace_xe_hw_fence_free (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zo_3ustogPDVKZwu@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
A fix for fbdev on big endian systems, a condition fix for a sharp panel
at removal, and a fix for qxl to prevent unpinned buffer access under
certain conditions.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711-benign-rich-mouflon-2eeafe@houat
|
|
link_is_up() and tipc_link_is_up() have the same functionality.
Consolidate these functions.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct tipc_name_table in core.h is not used. Remove this declaration.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
