summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-09bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCUMatt Bobrowski
Currently, BPF kfuncs which accept trusted pointer arguments i.e. those flagged as KF_TRUSTED_ARGS, KF_RCU, or KF_RELEASE, all require an original/unmodified trusted pointer argument to be supplied to them. By original/unmodified, it means that the backing register holding the trusted pointer argument that is to be supplied to the BPF kfunc must have its fixed offset set to zero, or else the BPF verifier will outright reject the BPF program load. However, this zero fixed offset constraint that is currently enforced by the BPF verifier onto BPF kfuncs specifically flagged to accept KF_TRUSTED_ARGS or KF_RCU trusted pointer arguments is rather unnecessary, and can limit their usability in practice. Specifically, it completely eliminates the possibility of constructing a derived trusted pointer from an original trusted pointer. To put it simply, a derived pointer is a pointer which points to one of the nested member fields of the object being pointed to by the original trusted pointer. This patch relaxes the zero fixed offset constraint that is enforced upon BPF kfuncs which specifically accept KF_TRUSTED_ARGS, or KF_RCU arguments. Although, the zero fixed offset constraint technically also applies to BPF kfuncs accepting KF_RELEASE arguments, relaxing this constraint for such BPF kfuncs has subtle and unwanted side-effects. This was discovered by experimenting a little further with an initial version of this patch series [0]. The primary issue with relaxing the zero fixed offset constraint on BPF kfuncs accepting KF_RELEASE arguments is that it'd would open up the opportunity for BPF programs to supply both trusted pointers and derived trusted pointers to them. For KF_RELEASE BPF kfuncs specifically, this could be problematic as resources associated with the backing pointer could be released by the backing BPF kfunc and cause instabilities for the rest of the kernel. With this new fixed offset semantic in-place for BPF kfuncs accepting KF_TRUSTED_ARGS and KF_RCU arguments, we now have more flexibility when it comes to the BPF kfuncs that we're able to introduce moving forward. Early discussions covering the possibility of relaxing the zero fixed offset constraint can be found using the link below. This will provide more context on where all this has stemmed from [1]. Notably, pre-existing tests have been updated such that they provide coverage for the updated zero fixed offset functionality. Specifically, the nested offset test was converted from a negative to positive test as it was already designed to assert zero fixed offset semantics of a KF_TRUSTED_ARGS BPF kfunc. [0] https://lore.kernel.org/bpf/ZnA9ndnXKtHOuYMe@google.com/ [1] https://lore.kernel.org/bpf/ZhkbrM55MKQ0KeIV@google.com/ Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20240709210939.1544011-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-07-09Merge branch 'fix-libbpf-bpf-skeleton-forward-backward-compat'Alexei Starovoitov
Andrii Nakryiko says: ==================== Fix libbpf BPF skeleton forward/backward compat Fix recently identified (but long standing) bug with handling BPF skeleton forward and backward compatibility. On libbpf side, even though BPF skeleton was always designed to be forward and backwards compatible through recording actual size of constrituents of BPF skeleton itself (map/prog/var skeleton definitions), libbpf implementation did implicitly hard-code those sizes by virtue of using a trivial array access syntax. This issue will only affect libbpf used as a shared library. Statically compiled libbpfs will always be in sync with BPF skeleton, bypassing this problem altogether. This patch set fixes libbpf, but also mitigates the problem for old libbpf versions by teaching bpftool to generate more conservative BPF skeleton, if possible (i.e., if there are no struct_ops maps defined). v1->v2: - fix SOB, add acks, typo fixes (Quentin, Eduard); - improve reporting of skipped map auto-attachment (Alan, Eduard). ==================== Link: https://lore.kernel.org/r/20240708204540.4188946-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-07-09libbpf: improve old BPF skeleton handling for map auto-attachAndrii Nakryiko
Improve how we handle old BPF skeletons when it comes to BPF map auto-attachment. Emit one warn-level message per each struct_ops map that could have been auto-attached, if user provided recent enough BPF skeleton version. Don't spam log if there are no relevant struct_ops maps, though. This should help users realize that they probably need to regenerate BPF skeleton header with more recent bpftool/libbpf-cargo (or whatever other means of BPF skeleton generation). Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240708204540.4188946-4-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-07-09libbpf: fix BPF skeleton forward/backward compat handlingAndrii Nakryiko
BPF skeleton was designed from day one to be extensible. Generated BPF skeleton code specifies actual sizes of map/prog/variable skeletons for that reason and libbpf is supposed to work with newer/older versions correctly. Unfortunately, it was missed that we implicitly embed hard-coded most up-to-date (according to libbpf's version of libbpf.h header used to compile BPF skeleton header) sizes of those structs, which can differ from the actual sizes at runtime when libbpf is used as a shared library. We have a few places were we just index array of maps/progs/vars, which implicitly uses these potentially invalid sizes of structs. This patch aims to fix this problem going forward. Once this lands, we'll backport these changes in Github repo to create patched releases for older libbpfs. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support") Fixes: 430025e5dca5 ("libbpf: Add subskeleton scaffolding") Fixes: 08ac454e258e ("libbpf: Auto-attach struct_ops BPF maps in BPF skeleton") Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com> Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240708204540.4188946-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-07-09bpftool: improve skeleton backwards compat with old buggy libbpfsAndrii Nakryiko
Old versions of libbpf don't handle varying sizes of bpf_map_skeleton struct correctly. As such, BPF skeleton generated by newest bpftool might not be compatible with older libbpf (though only when libbpf is used as a shared library), even though it, by design, should. Going forward libbpf will be fixed, plus we'll release bug fixed versions of relevant old libbpfs, but meanwhile try to mitigate from bpftool side by conservatively assuming older and smaller definition of bpf_map_skeleton, if possible. Meaning, if there are no struct_ops maps. If there are struct_ops, then presumably user would like to have auto-attaching logic and struct_ops map link placeholders, so use the full bpf_map_skeleton definition in that case. Acked-by: Quentin Monnet <qmo@kernel.org> Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com> Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240708204540.4188946-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-07-09net: ethernet: lantiq_etop: fix double free in detachAleksander Jan Bajkowski
The number of the currently released descriptor is never incremented which results in the same skb being released multiple times. Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver") Reported-by: Joe Perches <joe@perches.com> Closes: https://lore.kernel.org/all/fc1bf93d92bb5b2f99c6c62745507cc22f3a7b2d.camel@perches.com/ Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240708205826.5176-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09netxen_nic: Use {low,upp}er_32_bits() helpersGeert Uytterhoeven
Use the existing {low,upp}er_32_bits() helpers instead of defining custom variants. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/319d4a5313ac75f7bbbb6b230b6802b18075c3e0.1720430602.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09Merge branch 'mlx5-misc-patches-2023-07-08'Jakub Kicinski
Tariq Toukan says: ==================== mlx5 misc patches 2023-07-08 This patchset contains features and small enhancements from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/20240708080025.1593555-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09net/mlx5e: CT: Initialize err to 0 to avoid warningCosmin Ratiu
It is theoretically possible to return bogus uninitialized values from mlx5_tc_ct_entry_replace_rules, even though in practice this will never be the case as the flow rule will be part of at least the regular ct table or the ct nat table, if not both. But to reduce noise, initialize err to 0. Fixes: 49d37d05f216 ("net/mlx5: CT: Separate CT and CT-NAT tuple entries") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240708080025.1593555-11-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09net/mlx5e: SHAMPO, Add missing aggregate counterDragos Tatulea
When the rx_hds_nodata_packets/bytes counters were added, the aggregate counters were omitted. This patch adds them. Fixes: e95c5b9e8912 ("net/mlx5e: SHAMPO, Add header-only ethtool counters for header data split") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240708080025.1593555-10-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09net/mlx5: DR, Remove definer functions from SW Steering APIYevgeny Kliteynik
No need to expose definer get/put functions as part of SW Steering API - they are internal functions. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240708080025.1593555-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09Merge branch 'mlxsw-improvements'Jakub Kicinski
Petr Machata says: ==================== mlxsw: Improvements This patchset contains assortments of improvements to the mlxsw driver. Please see individual patches for details. ==================== Link: https://patch.msgid.link/cover.1720447210.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09mlxsw: pci: Lock configuration space of upstream bridge during resetIdo Schimmel
The driver triggers a "Secondary Bus Reset" (SBR) by calling __pci_reset_function_locked() which asserts the SBR bit in the "Bridge Control Register" in the configuration space of the upstream bridge for 2ms. This is done without locking the configuration space of the upstream bridge port, allowing user space to access it concurrently. Linux 6.11 will start warning about such unlocked resets [1][2]: pcieport 0000:00:01.0: unlocked secondary bus reset via: pci_reset_bus_function+0x51c/0x6a0 Avoid the warning and the concurrent access by locking the configuration space of the upstream bridge prior to the reset and unlocking it afterwards. [1] https://lore.kernel.org/all/171711746953.1628941.4692125082286867825.stgit@dwillia2-xfh.jf.intel.com/ [2] https://lore.kernel.org/all/20240531213150.GA610983@bhelgaas/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/9937b0afdb50f2f2825945393c94c093c04a5897.1720447210.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09mlxsw: core_thermal: Report valid current state during cooling device ↵Ido Schimmel
registration Commit 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()") changed the thermal core to read the current state of the cooling device as part of the cooling device's registration. This is incompatible with the current implementation of the cooling device operations in mlxsw, leading to initialization failure with errors such as: mlxsw_spectrum 0000:01:00.0: Failed to register cooling device mlxsw_spectrum 0000:01:00.0: cannot register bus device The reason for the failure is that when the get current state operation is invoked the driver tries to derive the index of the cooling device by walking a per thermal zone array and looking for the matching cooling device pointer. However, the pointer is returned from the registration function and therefore only set in the array after the registration. The issue was later fixed by commit 1af89dedc8a5 ("thermal: core: Do not fail cdev registration because of invalid initial state") by not failing the registration of the cooling device if it cannot report a valid current state during registration, although drivers are responsible for ensuring that this will not happen. Therefore, make sure the driver is able to report a valid current state for the cooling device during registration by passing to the registration function a per cooling device private data that already has the cooling device index populated. While at it, call thermal_cooling_device_unregister() unconditionally since the function returns immediately if the cooling device pointer is NULL. Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/c823c4678b6b7afb902c35b3551c81a053afd110.1720447210.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09mlxsw: Warn about invalid accesses to array fieldsPetr Machata
A forgotten or buggy variable initialization can cause out-of-bounds access to a register or other item array field. For an overflow, such access would mangle adjacent parts of the register payload. For an underflow, due to all variables being unsigned, the access would likely trample unrelated memory. Since neither is correct, replace these accesses with accesses at the index of 0, and warn about the issue. Suggested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/b988fb265c2f6c1206fe12d5bfdcfa188b7672d1.1720447210.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09i40e: Fix XDP program unloading while removing the driverMichal Kubiak
The commit 6533e558c650 ("i40e: Fix reset path while removing the driver") introduced a new PF state "__I40E_IN_REMOVE" to block modifying the XDP program while the driver is being removed. Unfortunately, such a change is useful only if the ".ndo_bpf()" callback was called out of the rmmod context because unloading the existing XDP program is also a part of driver removing procedure. In other words, from the rmmod context the driver is expected to unload the XDP program without reporting any errors. Otherwise, the kernel warning with callstack is printed out to dmesg. Example failing scenario: 1. Load the i40e driver. 2. Load the XDP program. 3. Unload the i40e driver (using "rmmod" command). The example kernel warning log: [ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.002726] Call Trace: [ +0.002457] <TASK> [ +0.002119] ? __warn+0x80/0x120 [ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005586] ? report_bug+0x164/0x190 [ +0.003678] ? handle_bug+0x3c/0x80 [ +0.003503] ? exc_invalid_op+0x17/0x70 [ +0.003846] ? asm_exc_invalid_op+0x1a/0x20 [ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870 [ +0.005586] unregister_netdevice_queue+0xf7/0x140 [ +0.004806] unregister_netdev+0x1c/0x30 [ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e] [ +0.004604] i40e_remove+0x1a1/0x420 [i40e] [ +0.004220] pci_device_remove+0x3f/0xb0 [ +0.003943] device_release_driver_internal+0x19f/0x200 [ +0.005243] driver_detach+0x48/0x90 [ +0.003586] bus_remove_driver+0x6d/0xf0 [ +0.003939] pci_unregister_driver+0x2e/0xb0 [ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e] [ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310 [ +0.005153] do_syscall_64+0x85/0x170 [ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220 [ +0.004886] ? do_syscall_64+0x95/0x170 [ +0.003851] ? exc_page_fault+0x7e/0x180 [ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79 [ +0.005064] RIP: 0033:0x7f59dc9347cb [ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48 [ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb [ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748 [ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000 [ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000 [ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000 [ +0.007151] </TASK> [ +0.002204] ---[ end trace 0000000000000000 ]--- Fix this by checking if the XDP program is being loaded or unloaded. Then, block only loading a new program while "__I40E_IN_REMOVE" is set. Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP callback to avoid unnecessary operations and checks. Fixes: 6533e558c650 ("i40e: Fix reset path while removing the driver") Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240708230750.625986-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-10tracing/kprobes: Fix build error when find_module() is not availableMasami Hiramatsu (Google)
The kernel test robot reported that the find_module() is not available if CONFIG_MODULES=n. Fix this error by hiding find_modules() in #ifdef CONFIG_MODULES with related rcu locks as try_module_get_by_name(). Link: https://lore.kernel.org/all/172056819167.201571.250053007194508038.stgit@devnote2/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407070744.RcLkn8sq-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202407070917.VVUCBlaS-lkp@intel.com/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-07-09Merge branch 'selftests-drv-net-rss_ctx-more-tests'Jakub Kicinski
Jakub Kicinski says: ==================== selftests: drv-net: rss_ctx: more tests Add a few more tests for RSS. v1: https://lore.kernel.org/all/20240705015725.680275-1-kuba@kernel.org/ ==================== Link: https://patch.msgid.link/20240708213627.226025-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09selftests: drv-net: rss_ctx: test flow rehashing without impacting trafficJakub Kicinski
Some workloads may want to rehash the flows in response to an imbalance. Most effective way to do that is changing the RSS key. Check that changing the key does not cause link flaps or traffic disruption. Disrupting traffic for key update is not incorrect, but makes the key update unusable for rehashing under load. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09selftests: drv-net: rss_ctx: check behavior of indirection table resizingJakub Kicinski
Some devices dynamically increase and decrease the size of the RSS indirection table based on the number of enabled queues. When that happens driver must maintain the balance of entries (preferably duplicating the smaller table). Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09selftests: drv-net: rss_ctx: test queue changes vs user RSS configJakub Kicinski
By default main RSS table should change to include all queues. When user sets a specific RSS config the driver should preserve it, even when queue count changes. Driver should refuse to deactivate queues used in the user-set RSS config. For additional contexts driver should still refuse to deactivate queues in use. Whether the contexts should get resized like context 0 when queue count increases is a bit unclear. I anticipate most drivers today don't do that. Since main use case for additional contexts is to set the indir table - it doesn't seem worthwhile to care about behavior of the default table too much. Don't test that. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09selftests: drv-net: rss_ctx: factor out send traffic and checkJakub Kicinski
Wrap up sending traffic and checking in which queues it landed in a helper. The method used for testing is to send a lot of iperf traffic and check which queues received the most packets. Those should be the queues where we expect iperf to land - either because we installed a filter for the port iperf uses, or we didn't and expect it to use context 0. Contexts get disjoint queue sets, but the main context (AKA context 0) may receive some background traffic (noise). Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09selftests: drv-net: rss_ctx: fix cleanup in the basic testJakub Kicinski
The basic test may fail without resetting the RSS indir table. Use the .exec() method to run cleanup early since we re-test with traffic that returning to default state works. While at it reformat the doc a tiny bit. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09PCI: dw-rockchip: Use pci_epc_init_notify() directlyNiklas Cassel
A previous commit ("PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapper") removed the dw_pcie_ep_init_notify() wrapper and changed the DWC glue drivers to instead use pci_epc_init_notify() directly. The endpoint support for the dw-rockchip had not been merged at that point in time, so the previous commit wrapper") did not update dw-rockchip. Do the same change for dw-rockchip, so that the driver will not try to use a function that has now been removed. Link: https://lore.kernel.org/linux-pci/20240622132024.2927799-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-09PCI: dw-rockchip: Add endpoint mode supportNiklas Cassel
The PCIe controller in rk3568 and rk3588 can operate in endpoint mode. This endpoint mode support heavily leverages the existing code in pcie-designware-ep.c. Add support for endpoint mode to the existing pcie-dw-rockchip glue driver. [kwilczynski: squash with patch adding the PCI_ENDPOINT dependency] Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-10-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dw-rockchip: Refactor the driver to prepare for EP modeNiklas Cassel
Refactor the driver to prepare for EP mode. Add of-match data to the existing compatible, and explicitly define it as DW_PCIE_RC_TYPE. This way, we will be able to add EP mode in a follow-up commit in a much less intrusive way, which makes the follow-up commit much easier to review. No functional change intended. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-9-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dw-rockchip: Add rockchip_pcie_get_ltssm() helperNiklas Cassel
Add a rockchip_pcie_ltssm() helper function that reads the LTSSM status. This helper will be used in additional places in follow-up commits. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-8-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dw-rockchip: Fix weird indentationNiklas Cassel
Fix the indentation of rockchip_pcie_{readl,writel}_apb() parameters to match the opening parenthesis. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-7-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dw-rockchip: Fix initial PERST# GPIO valueNiklas Cassel
PERST# is active low according to the PCIe specification. However, the existing pcie-dw-rockchip.c driver does: gpiod_set_value(..., 0); msleep(100); gpiod_set_value(..., 1); when asserting + deasserting PERST#. This is of course wrong, but because all the device trees for this compatible string have also incorrectly marked this GPIO as ACTIVE_HIGH: $ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568* $ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588* The actual toggling of PERST# is correct, and we cannot change it anyway, since that would break device tree compatibility. However, this driver does request the GPIO to be initialized as GPIOD_OUT_HIGH, which does cause a silly sequence where PERST# gets toggled back and forth for no good reason. Fix this by requesting the GPIO to be initialized as GPIOD_OUT_LOW (which for this driver means PERST# asserted). This will avoid an unnecessary signal change where PERST# gets deasserted (by devm_gpiod_get_optional()) and then gets asserted (by rockchip_pcie_start_link()) just a few instructions later. Before patch, debug prints on EP side, when booting RC: [ 845.606810] pci: PERST# asserted by host! [ 852.483985] pci: PERST# de-asserted by host! [ 852.503041] pci: PERST# asserted by host! [ 852.610318] pci: PERST# de-asserted by host! After patch, debug prints on EP side, when booting RC: [ 125.107921] pci: PERST# asserted by host! [ 132.111429] pci: PERST# de-asserted by host! This extra, very short, PERST# assertion + deassertion has been reported to cause issues with certain WLAN controllers, e.g. RTL8822CE. Fixes: 0e898eb8df4e ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver") Link: https://lore.kernel.org/linux-pci/20240417164227.398901-1-cassel@kernel.org Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Jianfeng Liu <liujianfeng1994@gmail.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org # v5.15+
2024-07-09PCI: dw-rockchip: Add error messages in .probe() error pathsUwe Kleine-König
Drivers that silently fail to probe provide a bad user experience and make it unnecessarily hard to debug such a failure. Fix it by using dev_err_probe() instead of a plain return. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240227141256.413055-2-ukleinek@debian.org Signed-off-by: Uwe Kleine-König <ukleinek@debian.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: rockchip: Use GPIOD_OUT_LOW flag while requesting ep_gpioManivannan Sadhasivam
Rockchip platforms use 'GPIO_ACTIVE_HIGH' flag in the devicetree definition for ep_gpio. This means, whatever the logical value set by the driver for the ep_gpio, physical line will output the same logic level. For instance, gpiod_set_value_cansleep(rockchip->ep_gpio, 0); --> Level low gpiod_set_value_cansleep(rockchip->ep_gpio, 1); --> Level high But while requesting the ep_gpio, GPIOD_OUT_HIGH flag is currently used. Now, this also causes the physical line to output 'high' creating trouble for endpoint devices during host reboot. When host reboot happens, the ep_gpio will initially output 'low' due to the GPIO getting reset to its POR value. Then during host controller probe, it will output 'high' due to GPIOD_OUT_HIGH flag. Then during rockchip_pcie_host_init_port(), it will first output 'low' and then 'high' indicating the completion of controller initialization. On the endpoint side, each output 'low' of ep_gpio is accounted for PERST# assert and 'high' for PERST# deassert. With the above mentioned flow during host reboot, endpoint will witness below state changes for PERST#: (1) PERST# assert - GPIO POR state (2) PERST# deassert - GPIOD_OUT_HIGH while requesting GPIO (3) PERST# assert - rockchip_pcie_host_init_port() (4) PERST# deassert - rockchip_pcie_host_init_port() Now the time interval between (2) and (3) is very short as both happen during the driver probe(), and this results in a race in the endpoint. Because, before completing the PERST# deassertion in (2), endpoint got another PERST# assert in (3). A proper way to fix this issue is to change the GPIOD_OUT_HIGH flag in (2) to GPIOD_OUT_LOW. Because the usual convention is to request the GPIO with a state corresponding to its 'initial/default' value and let the driver change the state of the GPIO when required. As per that, the ep_gpio should be requested with GPIOD_OUT_LOW as it corresponds to the POR value of '0' (PERST# assert in the endpoint). Then the driver can change the state of the ep_gpio later in rockchip_pcie_host_init_port() as per the initialization sequence. This fixes the firmware crash issue in Qcom based modems connected to Rockpro64 based board. Fixes: e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support") Closes: https://lore.kernel.org/mhi/20240402045647.GG2933@thinkpad/ Link: https://lore.kernel.org/linux-pci/20240416-pci-rockchip-perst-fix-v1-1-4800b1d4d954@linaro.org Reported-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Cc: stable@vger.kernel.org # v4.9
2024-07-09PCI: rockchip-host: Wait 100ms after reset before starting configurationDamien Le Moal
PCIe r6.0, sec 6.6.1, states that the host should wait for at least 100 msec from the end of a conventional reset (PERST# is de-asserted) before sending a configuration request to ensure that the device is able to respond with a "Request Retry Status" completion. Add the PCIE_T_RRS_READY_MS macro to define this wait time and modify rockchip_pcie_host_init_port() to add this 100ms sleep after deasserting PERST# using the ep_gpio GPIO. Link: https://lore.kernel.org/linux-pci/20240413004120.1099089-3-dlemoal@kernel.org Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: rockchip-host: Fix rockchip_pcie_host_init_port() PERST# handlingDamien Le Moal
PCIe CEM r5.1, sec 2.9.2, mandates that the PERST# signal must remain asserted for at least 100 usec (Tperst-clk) after the PCIe reference clock becomes stable (if a reference clock is supplied), and for at least 100 msec after the power is stable (Tpvperl, defined by the macro PCIE_T_PVPERL_MS). Modify rockchip_pcie_host_init_port() to satisfy these constraints by adding a sleep period before deasserting PERST# using the ep_gpio GPIO. Since Tperst-clk is the shorter wait time, add an msleep() call for the longer PCIE_T_PVPERL_MS milliseconds to handle both timing requirements. Link: https://lore.kernel.org/linux-pci/20240413004120.1099089-2-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dwc: ep: Enforce DWC specific 64-bit BAR limitationNiklas Cassel
From the DWC EP databook 5.96a, section "3.5.7.1.4 General Rules for BAR Setup (Fixed Mask or Programmable Mask Schemes Only)": "Any pair (for example BARs 0 and 1) can be configured as one 64-bit BAR, two 32-bit BARs, or one 32-bit BAR." "BAR pairs cannot overlap to form a 64-bit BAR. For example, you cannot combine BARs 1 and 2 to form a 64-bit BAR." While this limitation does exist in some other PCI endpoint controllers, e.g. cdns_pcie_ep_set_bar(), the limitation does not appear to be defined in the PCIe specification itself, thus add an explicit check for this in dw_pcie_ep_set_bar() (rather than pci_epc_set_bar()). Link: https://lore.kernel.org/linux-pci/20240528134839.8817-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: layerscape-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link ↵Manivannan Sadhasivam
Down event Now that dw_pcie_ep_linkdown() is available, use it. This also handles the reinitialization of DWC non-sticky registers in addition to sending the notification to EPF drivers. Closes: https://lore.kernel.org/linux-pci/20240528195539.GA458945@bhelgaas Link: https://lore.kernel.org/linux-pci/20240606-pci-deinit-v1-5-4395534520dc@linaro.org Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down ↵Manivannan Sadhasivam
event Now that the generic dw_pcie_ep_linkdown() API is available, use it. This also handles the reinitialization of DWC non-sticky registers in addition to sending the notification to EPF drivers. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-9-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapperManivannan Sadhasivam
Currently dw_pcie_ep_init_notify() wrapper just calls pci_epc_init_notify() directly, so this wrapper provides no benefit to the glue drivers. Remove it and call pci_epc_init_notify() directly from glue drivers. Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Link: https://lore.kernel.org/linux-pci/20240606-pci-deinit-v1-1-4395534520dc@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down eventManivannan Sadhasivam
Per PCIe r6.0, sec 5.2, a Link Down event can happen under any of the following circumstances: 1. Fundamental/Hot reset 2. Link disable transmission by upstream component 3. Moving from L2/L3 to L0 In those cases, Link Down causes some non-sticky DWC registers to lose the state (like REBAR, etc.), so drivers need to reinitialize them to function properly once the link comes back again. This is not a problem for drivers supporting PERST# IRQ, since they can reinitialize the registers in the PERST# IRQ callback. But for the drivers not supporting PERST#, there is no way they can reinitialize the registers other than relying on Link Down IRQ received when the link goes down. So add a DWC generic API dw_pcie_ep_linkdown() that reinitializes the non-sticky registers and also notifies the EPF drivers about link going down. This API can also be used by the drivers supporting PERST# to handle the scenario (2) mentioned above. NOTE: For the sake of code organization, move the dw_pcie_ep_linkup() definition just above dw_pcie_ep_linkdown(). Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-8-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: update spec citation] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system ↵Frank Li
suspend Instead of relying on the vendor specific implementations to send the PME_Turn_Off message, introduce a generic way of sending the message using the MSG TLP. This is achieved by reserving a region for MSG TLP of size 'pci->region_align', at the end of the first IORESOURCE_MEM window of the host bridge. And then sending the PME_Turn_Off message during system suspend with the help of iATU. The reason for reserving the MSG TLP region at the end of the IORESOURCE_MEM is to avoid generating holes in between, because when the region is allocated using allocate_resource(), memory will be allocated from the start of the window. Later, if memory gets allocated for an endpoint of size bigger than 'region_align', there will be a hole between MSG TLP region and endpoint memory. This generic implementation is optional for the glue drivers and can be overridden by a custom 'pme_turn_off' callback. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-5-a54265c39742@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macroFrank Li
Add PCIE_MSG_CODE_PME_TURN_OFF macros to enable a PCIe host driver to send PME_Turn_Off messages. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-4-a54265c39742@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: Add PCIE_MSG_CODE_ASSERT_INTx message macrosYoshihiro Shimoda
Add "Message Routing" and "INTx Mechanism Messages" macros to enable a PCIe driver to send messages for INTx Interrupt Signaling. Values from PCIe r6.1, sec 2.2.8 and 2.2.8.1. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-1-a54265c39742@nxp.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-07-09PCI: dwc: Add outbound MSG TLPs supportYoshihiro Shimoda
Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering INTx IRQs by iATU in the PCIe endpoint mode in near the future. PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of MsgD. This implementation supports the data-less messages only for now. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-3-a54265c39742@nxp.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-07-09PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structureYoshihiro Shimoda
This is a preparation before adding the Msg-type outbound iATU mapping. The respective update will require two more arguments added to __dw_pcie_prog_outbound_atu(). That will make the already complicated function prototype even more hard to comprehend accepting _eight_ arguments. To prevent that and keep the code more-or-less readable, move all the outbound iATU-related arguments to a new config structure: struct dw_pcie_ob_atu_cfg, and pass a pointer to dw_pcie_prog_outbound_atu(). The structure should be locally defined and populated with the outbound iATU settings implied by the caller context. As a result of this change there is no longer need in having the two distinctive methods for the Host and Endpoint outbound iATU setups since the code can directly call the dw_pcie_prog_outbound_atu() method with the config structure populated, so drop dw_pcie_prog_ep_outbound_atu(). [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-2-a54265c39742@nxp.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-07-09PCI: dwc: Fix index 0 incorrectly being interpreted as a free ATU slotFrank Li
When PERST# assert and deassert happens on the PERST# supported platforms, both iATU0 and iATU6 will map inbound window to BAR0. DMA will access the area that was previously allocated (iATU0) for BAR0, instead of the new area (iATU6) for BAR0. Right now, this isn't an issue because both iATU0 and iATU6 should translate inbound accesses to BAR0 to the same allocated memory area. However, having two separate inbound mappings for the same BAR is a disaster waiting to happen. The mappings between PCI BAR and iATU inbound window are maintained in the dw_pcie_ep::bar_to_atu[] array. While allocating a new inbound iATU map for a BAR, dw_pcie_ep_inbound_atu() API checks for the availability of the existing mapping in the array and if it is not found (i.e., value in the array indexed by the BAR is found to be 0), it allocates a new map value using find_first_zero_bit(). The issue is the existing logic failed to consider the fact that the map value '0' is a valid value for BAR0, so find_first_zero_bit() will return '0' as the map value for BAR0 (note that it returns the first zero bit position). Due to this, when PERST# assert + deassert happens on the PERST# supported platforms, the inbound window allocation restarts from BAR0 and the existing logic to find the BAR mapping will return '6' for BAR0 instead of '0' due to the fact that it considers '0' as an invalid map value. Fix this issue by always incrementing the map value before assigning to bar_to_atu[] array and then decrementing it while fetching. This will make sure that the map value '0' always represents the invalid mapping." Fixes: 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") Closes: https://lore.kernel.org/linux-pci/ZXsRp+Lzg3x%2Fnhk3@x1-carbon/ Link: https://lore.kernel.org/linux-pci/20240412160841.925927-1-Frank.Li@nxp.com Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
2024-07-09PCI: dwc: Use msleep() in dw_pcie_wait_for_link()Konrad Dybcio
According to [1], msleep should be used for large sleeps, such as the 100-ish ms one in this function. Comply with the guide and use it. [1] https://docs.kernel.org/timers/timers-howto.html [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240215-topic-pci_sleep-v2-1-79334884546b@linaro.org Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09Documentation: PCI: pci-endpoint: Fix EPF ops listAlexander Stein
With commit 5779dd0a7dbd7 ("PCI: endpoint: Use notification chain mechanism to notify EPC events to EPF") the linkup callback has been removed and replaced by EPC event notifications. With commit 256ae475201b1 ("PCI: endpoint: Add pci_epf_ops to expose function-specific attrs") a new (optional) add_cfs callback was added. Update documentation accordingly. Link: https://lore.kernel.org/linux-pci/20240418084924.1724703-1-alexander.stein@ew.tq-group.com Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09misc: pci_endpoint_test: Remove unused pci_endpoint_test_bar_{readl,writel} ↵Jiapeng Chong
functions These two functions are defined in the pci_endpoint_test.c file, but not called elsewhere, so delete these unused functions. This fixes the following warning: drivers/misc/pci_endpoint_test.c:144:19: warning: unused function 'pci_endpoint_test_bar_readl'. drivers/misc/pci_endpoint_test.c:150:20: warning: unused function 'pci_endpoint_test_bar_writel'. No functional changes intended. [kwilczynski: commit log] Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9064 Link: https://lore.kernel.org/linux-pci/20240704023227.87039-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-09misc: pci_endpoint_test: Document policy about adding pci_device_idYoshihiro Shimoda
Add a comment suggesting that if the endpoint controller Vendor and Device ID are programmable, an existing entry might be usable for testing without having to add an entry to pci_endpoint_test_tbl[]. Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-6-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2024-07-09misc: pci_endpoint_test: Refactor dma_set_mask_and_coherent() logicFrank Li
dma_set_mask_and_coherent() should never fail when the mask is >= 32bit, unless the architecture has no DMA support. So no need to check for the error and also no need to set dma_set_mask_and_coherent(32) as a fallback. Even if dma_set_mask_and_coherent(48) fails due to the lack of DMA support (theoretically), then dma_set_mask_and_coherent(32) will also fail for the same reason. So the fallback doesn't make sense. Simplify the code by setting the streaming and coherent DMA mask to 48 bits. Link: https://lore.kernel.org/linux-pci/20240502195903.3191049-1-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR testsNiklas Cassel
The current code uses writel()/readl(), which has an implicit memory barrier for every single readl()/writel(). Additionally, reading 4 bytes at a time over the PCI bus is not really optimal, considering that this code is running in an ioctl handler. Use memcpy_toio()/memcpy_fromio() for BAR tests. Before patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 1.56s After patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 0.54s Link: https://lore.kernel.org/linux-pci/20240322164139.678228-1-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-24 09:11:57 +0000