| Age | Commit message (Collapse) | Author |
|---|
|
Keep the same flow of port representor creation, but instead of general
attach function create helpers for specific representor type.
Store function pointer for add and remove representor.
Type of port representor can be also known based on VSI type, but it
is more clean to have it directly saved in port representor structure.
Add devlink lock for whole port representor creation and destruction.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Configure netdevice for subfunction usecase. Mostly it is reusing ops
from the PF netdevice.
SF netdev is linked to devlink port registered after SF activation.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement subfunction driver. It is probe when subfunction port is
activated.
VSI is already created. During the probe VSI is being configured.
MAC unicast and broadcast filter is added to allow traffic to pass.
Store subfunction pointer in VSI struct. The same is done for VF
pointer. Make union of subfunction and VF pointer as only one of them
can be set with one VSI.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Allocate devlink for subfunction instance.
Create header file for subfunction device. Define subfunction device
structure there as it is needed for devlink allocation.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When subfunction VSI is open the same code as for PF VSI should be
executed. Also when up is complete. Reflect that in code by adding
subfunction VSI to consideration.
In case of stopping, PF doesn't have additional tasks, so the same
is with subfunction VSI.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement devlink port handlers responsible for ethernet type devlink
subfunctions. Create subfunction devlink port and setup all resources
needed for a subfunction netdev to operate. Configure new VSI for each
new subfunction, initialize and configure interrupts and Tx/Rx resources.
Set correct MAC filters and create new netdev.
For now, subfunction is limited to only one Tx/Rx queue pair.
Only allocate new subfunction VSI with devlink port new command.
Allocate and free subfunction MSIX interrupt vectors using new API
calls with pci_msix_alloc_irq_at and pci_msix_free_irq.
Support both automatic and manual subfunction numbers. If no subfunction
number is provided, use xa_alloc to pick a number automatically. This
will find the first free index and use that as the number. This reduces
burden on users in the simple case where a specific number is not
required. It may also be slightly faster to check that a number exists
since xarray lookup should be faster than a linear scan of the dyn_ports
xarray.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Make some of the netdevice_ops functions visible from outside for
another VSI type created netdev.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add required plumbing for new VSI type dedicated to devlink subfunctions.
Make sure that the vsi is properly configured and destroyed. Also allow
loading XDP and AF_XDP sockets.
The first implementation of devlink subfunctions supports only one Tx/Rx
queue pair per given subfunction.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add error message to better explain to the user when SWIG and
python-config is missing from the path. Makefile was cleaned up
and unneeded elements were removed.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Replace the deprecated one-element array with a modern flexible-array
member in the struct affs_root_head.
Add a comment that most struct members are not used, but kept as
documentation.
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The macros GET_END_PTR() and AFFS_GET_HASHENTRY() are not used anymore
and can be removed. Remove them.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since MT792x_CLC_CHAN is currently not in use, we have added an
extension for setting txpower to replace it.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240819015334.14580-2-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Due to the lack of checks on the clc array, if the firmware supports
more clc configuration, it will cause illegal memory access.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240819015334.14580-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 0bb4e9187ea4 ("mt76: mt7615: fix hwmon temp sensor mem use-after-free")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240905014753.353271-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240904075213.1352976-1-nichen@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In multi-channel scenarios, the granted channel must be aborted before
suspending. Otherwise, the firmware will be put into a wrong state,
resulting in an association failure after resuming.
With this patch, the granted channel will be aborted before suspending
if necessary.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240902090054.15806-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `struct_group_tagged()`
helper to create a new tagged `struct mt76_connac2_mcu_rxd_hdr`.
This structure groups together all the members of the flexible
`struct mt76_connac2_mcu_rxd` except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct mt76_connac2_mcu_rxd` to `struct
mt76_connac2_mcu_rxd_hdr`.
We also want to ensure that when new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct mt76_connac2_mcu_rxd_hdr`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with these changes, fix the following warnings:
drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:32:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:40:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:49:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:58:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/Zr5KsZugaEXrApQJ@elsanto
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviwed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014455.4144536-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014955.4145423-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Immediately abort MCU commands when firmware requests DMA restart.
Link: https://patch.msgid.link/20240827093011.18621-24-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use skb_put_zero instead of skb_put
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: https://patch.msgid.link/20240827093011.18621-23-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When offloading is enabled, the software rx path may not have the latest
rate information.
Link: https://patch.msgid.link/20240827093011.18621-22-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix rx filter setting to prevent dropping NDPA frames. Without this
change, bfee functionality may behave abnormally.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Link: https://patch.msgid.link/20240827093011.18621-21-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reuse one bit from the length field for skip_unmap
Link: https://patch.msgid.link/20240827093011.18621-20-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
- use reconfig_complete to restart mac_work / queues
- reset full wtbl after firmware init
- clear wcid and vif mask to avoid leak
- fix sta poll list corruption
Link: https://patch.msgid.link/20240827093011.18621-19-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for reusing it in mt7915
Link: https://patch.msgid.link/20240827093011.18621-18-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Prevent racing against other functions disabling the same worker
Link: https://patch.msgid.link/20240827093011.18621-17-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Currently, CONNAC2 series do not support encryption for fragmented Tx frames.
Therefore, add dummy function mt7915_set_frag_threshold() to prevent SW
IEEE 802.11 fragmentation.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Link: https://patch.msgid.link/20240827093011.18621-16-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
On MT7915, MCU hangs do not trigger watchdog interrupts, so they can only
be detected through MCU message timeouts. Ensure that the hardware gets
restarted when that happens in order to prevent a permanent stuck state.
Link: https://patch.msgid.link/20240827093011.18621-15-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In some cases MCU messages can get lost. Instead of failing completely,
attempt to recover by re-sending them.
Link: https://patch.msgid.link/20240827093011.18621-14-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This avoids running into unnecessary timeouts waiting for MCU responses
Link: https://patch.msgid.link/20240827093011.18621-13-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Allows adding stations before assoc, though they are not passed to the
firmware yet at that point.
Link: https://patch.msgid.link/20240827093011.18621-12-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Also report auth/disassoc events, in order to give the driver more control over
handling the station state.
Link: https://patch.msgid.link/20240827093011.18621-11-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for improvements to sta handling. No functional changes.
Link: https://patch.msgid.link/20240827093011.18621-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add fragmentation index into TXD.DW2 to support IEEE 802.11 fragmentation.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Link: https://patch.msgid.link/20240827093011.18621-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reduces the amount of unnecessary WTBL bank switching, while still reserving
WTBL entries for vifs.
Link: https://patch.msgid.link/20240827093011.18621-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Avoids firmware race condition.
Link: https://patch.msgid.link/20240827093011.18621-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Ensure that packets are not sent out to the wrong channel
Link: https://patch.msgid.link/20240827093011.18621-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Whatever I may or may not have hoped for, looking after these drivers
seems to have firmly stuck as one of the responsibilities of the job Arm
pays me for, and I would still like to be aware of any other patches, so
make it official.
CC: Ilkka Koskinen <ilkka@os.amperecomputing.com>
CC: Jing Zhang <renyu.zj@linux.alibaba.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/22ef1687ff3aa9da49b4577b3a179ccc055433ae.1725470837.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Arm NI-700 Network-on-Chip Interconnect has a relatively
straightforward design with a hierarchy of voltage, power, and clock
domains, where each clock domain then contains a number of interface
units and a PMU which can monitor events thereon. As such, it begets a
relatively straightforward driver to interface those PMUs with perf.
Even more so than with arm-cmn, users will require detailed knowledge of
the wider system topology in order to meaningfully analyse anything,
since the interconnect itself cannot know what lies beyond the boundary
of each inscrutably-numbered interface. Given that, for now they are
also expected to refer to the NI-700 documentation for the relevant
event IDs to provide as well. An identifier is implemented so we can
come back and add jevents if anyone really wants to.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9933058d0ab8138c78a61cd6852ea5d5ff48e393.1725470837.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add an initial binding for the Arm NI-700 interconnect PMU. As with the
Arm CMN family, there are already future NI products on the roadmap, so
the overall binding is named generically just in case any
non-discoverable incompatibility between generations crops up.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5f86237580219116de37e5e54d8b7eb0c9ed580d.1725470837.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Take full advantage of our formats being stored in bitfield form, and
make the printing even more robust and simple by letting printk do all
the hard work of formatting bitlists.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/50459f2d48fc62310a566863dbf8a7c14361d363.1725474584.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Checking for NUMA_NO_NODE is a misleading and, on reflection, entirely
unnecessary micro-optimisation. If it ever did happen that an incoming
CPU has no NUMA affinity while the current CPU does, a questionably-
useful PMU migration isn't the biggest thing wrong with that picture...
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/00634da33c21269a00844140afc7cc3a2ac1eb4d.1725474584.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The pointer argument to memblock_free() needs to be a linear map address, but
in mem_init() we pass __init_begin/__init_end, which is a kernel image address.
This results in warnings when building with CONFIG_DEBUG_VIRTUAL=y:
virt_to_phys used for non-linear address: ffff800081270000 (set_reset_devices+0x0/0x10)
WARNING: CPU: 0 PID: 1 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x54/0x70
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc6-next-20240905 #5810 b1ebb0ad06653f35ce875413d5afad24668df3f3
Hardware name: FVP Base RevC (DT)
pstate: 2161402005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __virt_to_phys+0x54/0x70
lr : __virt_to_phys+0x54/0x70
sp : ffff80008169be20
...
Call trace:
__virt_to_phys+0x54/0x70
memblock_free+0x18/0x30
free_initmem+0x3c/0x9c
kernel_init+0x30/0x1cc
ret_from_fork+0x10/0x20
Fix this by having mem_init() convert the pointers via lm_alias().
Fixes: 1db9716d4487 ("arm64/mm: Delete __init region from memblock.reserved")
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Rong Qianfeng <rongqianfeng@vivo.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240905152935.4156469-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
According to David and Ryan, there isn't a bug here, even though we
don't advance the PTE entry, because __ptep_set_access_flags() only
uses the access flags from the entry.
However, we always check pte_same(pte, entry) using the first entry
in __ptep_set_access_flags(). This means that the checks from 1 to
nr - 1 are not comparing the same PTE indexes (thus, they always
return false), which can be a bit confusing. To clarify the code, let's
add some comments.
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240905081124.9576-1-21cnbao@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.
Fixes: f77ae7fcdc4763 ("ASoC: Intel: soc-acpi-intel-mtl-match: add cs42l43 only support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20240906060224.2241212-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.
Fixes: dd3bd9dc4708 ("ASoC: Intel: soc-acpi-intel-lnl-match: add cs42l43 only support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20240906060224.2241212-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.
Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.
Hence, in order to support DFS with MLO, do the following changes -
* Add channel context conf pointer as an argument to the function
ieee80211_radar_detected(). During MLO, drivers would have to pass on
which channel context conf radar is detected. Otherwise, drivers could
just pass NULL.
* ieee80211_radar_detected() will iterate over all channel contexts
present and
* if channel context conf is passed, only mark that as radar
detected
* if NULL is passed, then mark all channel contexts as radar
detected
* Then as usual, schedule the radar detected work.
* In the worker, go over all the contexts again and for all such context
which is marked with radar detected, cancel the ongoing CAC by calling
ieee80211_dfs_cac_cancel() and then notify cfg80211 via
cfg80211_radar_event().
* To cancel the CAC, pass the channel context as well where radar is
detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
canceled only on the links using the provided context, leaving other
links unaffected.
This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Now that all APIs have support to handle DFS per link, use proper link ID
instead of 0.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-8-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order to support DFS with MLO, handle the link ID now passed from
cfg80211, adjust the code to do everything per link and call the
notifications to cfg80211 correctly.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-7-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
