| Age | Commit message (Collapse) | Author |
|---|
|
failure
The driver does not handle the failure case while calling
dma_set_mask_and_coherent API.
In case of failure, capture the return value of API and then report an
error.
Addresses-coverity: Unchecked return value (CHECKED_RETURN)
Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Free the allocated resources for missing xlnx,num-fstores property.
Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add missing cleanup in devm_platform_ioremap_resource().
When probe fails remove dma channel resources and disable clocks in
accordance with the order of resources allocated .
Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-2-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We've found the AUX channel to be less reliable with PCLK_EDP at a
higher rate (typically 25 MHz). This is especially important on systems
with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant
use of AUX.
According to Rockchip, using any rate other than 24 MHz can cause
"problems between syncing the PHY an PCLK", which leads to all sorts of
unreliabilities around register operations.
Fixes: d67a38c5a623 ("arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220830131212.v2.1.I98d30623f13b785ca77094d0c0fd4339550553b6@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The CPLD_Dn GPIO assignment between SoM and CPLD has now been clarified
in schematic and the assignment is reversed. Update the DT to match the
hardware.
Fixes: 510c527b4ff57 ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
We have a handful of fixes:
- fix DMA from stack in wilc1000 driver
- fix crash on chip reset failure in mt7921e
- fix for the reported warning on aggregation timer expiry
- check packet lengths in hwsim virtio paths
- fix compiler warnings/errors with AAD construction by
using struct_group
- fix Intel 4965 driver rate scale operation
- release channel contexts correctly in mac80211 mlme code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It seems that the beep playback doesn't work well on IDT codec devices
when the codec auto-pm is enabled. Keep the power on while the beep
switch is enabled.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544
Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Functions that work on a pointer to virtual memory such as
virt_to_pfn() and users of that function such as
virt_to_page() are supposed to pass a pointer to virtual
memory, ideally a (void *) or other pointer. However since
many architectures implement virt_to_pfn() as a macro,
this function becomes polymorphic and accepts both a
(unsigned long) and a (void *).
If we instead implement a proper virt_to_pfn(void *addr)
function the following happens (occurred on arch/arm):
drivers/infiniband/sw/siw/siw_qp_tx.c:32:23: warning: incompatible
integer to pointer conversion passing 'dma_addr_t' (aka 'unsigned int')
to parameter of type 'const void *' [-Wint-conversion]
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: warning: passing argument
1 of 'virt_to_pfn' makes pointer from integer without a cast
[-Wint-conversion]
drivers/infiniband/sw/siw/siw_qp_tx.c:538:36: warning: incompatible
integer to pointer conversion passing 'unsigned long long'
to parameter of type 'const void *' [-Wint-conversion]
Fix this with an explicit cast. In one case where the SIW
SGE uses an unaligned u64 we need a double cast modifying the
virtual address (va) to a platform-specific uintptr_t before
casting to a (void *).
Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220902215918.603761-1-linus.walleij@linaro.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A a set of fixes from the GPIO subsystem.
Most are small driver fixes except the realtek-otto driver patch which
is pretty big but addresses a significant flaw that can cause the CPU
to stay infinitely busy on uncleared ISR on some platforms.
Summary:
- MAINTAINERS update
- fix resource leaks in gpio-mockup and gpio-pxa
- add missing locking in gpio-pca953x
- use 32-bit I/O in gpio-realtek-otto
- make irq_chip structures immutable in four more drivers"
* tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ws16c48: Make irq_chip immutable
gpio: 104-idio-16: Make irq_chip immutable
gpio: 104-idi-48: Make irq_chip immutable
gpio: 104-dio-48e: Make irq_chip immutable
gpio: realtek-otto: switch to 32-bit I/O
gpio: pca953x: Add mutex_lock for regcache sync in PM
gpio: mockup: remove gpio debugfs when remove device
gpio: pxa: use devres for the clock struct
MAINTAINERS: rectify entry for XILINX GPIO DRIVER
|
|
Using int type for sector index, there will be overflow in a large
capacity partition.
For example, if storage with sector size of 512 bytes and partition
capacity is larger than 2TB, there will be overflow.
Fixes: 1b6138385499 ("exfat: reduce block requests when zeroing a cluster")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a minor fix for the Xen grant driver
- a small series fixing a recently introduced problem in the Xen
blkfront/blkback drivers with negotiation of feature usage
* tag 'for-linus-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/grants: prevent integer overflow in gnttab_dma_alloc_pages()
xen-blkfront: Cache feature_persistent value before advertisement
xen-blkfront: Advertise feature-persistent as user requested
xen-blkback: Advertise feature-persistent as user requested
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix several build errors or warnings, cleanup some code, and adjust
arch_do_signal_or_restart() to adapt generic entry"
* tag 'loongarch-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: mm: Remove the unneeded result variable
LoongArch: Fix arch_remove_memory() undefined build error
LoongArch: Fix section mismatch due to acpi_os_ioremap()
LoongArch: Improve dump_tlb() output messages
LoongArch: Adjust arch_do_signal_or_restart() to adapt generic entry
LoongArch: Avoid orphan input sections
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Update defconfigs
- Fix linker script to align nospec tables correctly to avoid
potentially unbootable kernel with some config options
- Fix alignment check in prepare_hugepage_range() for 2GB hugepages to
avoid BUG in __unmap_hugepage_range() for unaligned mappings later
- Remove useless hugepage address alignment in hugetlb fault handling
* tag 's390-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages
s390: update defconfigs
s390: fix nospec table alignments
s390/mm: remove useless hugepage address alignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- GT1158 ID added to Goodix touchscreen driver
- Boeder Force Feedback Wheel USB added to iforce joystick driver
- fixup for iforce driver to avoid hangups
- fix autoloading of rk805-pwrkey driver.
* tag 'input-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: iforce - add support for Boeder Force Feedback Wheel
Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag
Input: goodix - add compatible string for GT1158
MAINTAINERS: add include/dt-bindings/input to INPUT DRIVERS
Input: rk805-pwrkey - fix module autoloading
Input: goodix - add support for GT1158
dt-bindings: input: touchscreen: add compatible string for Goodix GT1158
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git into fixes
Microchip RISC-V devicetree fixes for 6.0-rc4 (or later)
A fix for the warnings introduced in rc3 as part of fixing the console
spam from the L2's isr.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'dt-fixes-for-palmer-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git:
riscv: dts: microchip: use an mpfs specific l2 compatible
dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial/vt driver fixes for 6.0-rc4 that
resolve a number of reported issues:
- n_gsm fixups for previous changes that caused problems
- much-reported serdev crash fix that showed up in 6.0-rc1
- vt font selection bugfix
- kerneldoc build warning fixes
- other tiny serial core fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: n_gsm: avoid call of sleeping functions from atomic context
tty: n_gsm: replace kicktimer with delayed_work
tty: n_gsm: initialize more members at gsm_alloc_mux()
tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
tty: serial: atmel: Preserve previous USART mode if RS485 disabled
tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
tty: Fix lookahead_buf crash with serdev
serial: fsl_lpuart: RS485 RTS polariy is inverse
vt: Clear selection before changing the font
serial: document start_rx member at struct uart_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.0-rc4 that resolve
some reported problems and add some a device id:
- new device id for r8188eu driver
- use-after-free bugfixes for the rtl8712 driver
- fix up firmware dependency problem for the r8188eu driver
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8712: fix use after free bugs
staging: r8188eu: Add Rosewill USB-N150 Nano to device tables
staging: r8188eu: add firmware dependency
|
|
Commit b9684a71fca7 ("block, loop: support partitions without scanning")
adds GD_SUPPRESS_PART_SCAN for replacing part function of
GENHD_FL_NO_PART. But looks blk_add_partitions() is missed, since
loop doesn't want to add partitions if GENHD_FL_NO_PART was set.
And it causes regression on libblockdev (as called from udisks) which
operates with the LO_FLAGS_PARTSCAN.
Fixes the issue by not adding partitions if GD_SUPPRESS_PART_SCAN is
set.
Fixes: b9684a71fca7 ("block, loop: support partitions without scanning")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220823103819.395776-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here's a collection of primarily clk driver fixes, with a couple fixes
to the core framework.
We had to revert out a commit that affected boot on some devices that
have the CLK_OPS_PARENT_ENABLE flag set. It isn't critical to have
that fix so we'll try again next time.
Driver side fixes include:
- Plug an OF-node refcount bug in the TI clk driver
- Fix the error handling in the raspberry pi firmware get_rate so
that errors don't look like valid frequencies
- Avoid going out of bounds in the raspberry pi driver too if the
video firmware returns something we're not expecting"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops"
clk: bcm: rpi: Show clock id limit in error case
clk: bcm: rpi: Add missing newline
clk: bcm: rpi: Prevent out-of-bounds access
clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rate
clk: core: Fix runtime PM sequence in clk_core_unprepare()
clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops
clk: ti: Fix missing of_node_get() ti_find_clock_provider()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix out of bounds access in gpio-fan driver
- Fix VOUT margin caching in PMBus core
- Avoid error message after -EPROBE_DEFER from devm_regulator_register()
* tag 'hwmon-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (gpio-fan) Fix array out of bounds access
hwmon: (pmbus) Fix vout margin caching
hwmon: (pmbus) Use dev_err_probe() to filter -EPROBE_DEFER error messages
|
|
The mmap lock protects the page walker from changes to the page tables
during the walk. However a read lock is insufficient to protect those
areas which don't have a VMA as munmap() detaches the VMAs before
downgrading to a read lock and actually tearing down PTEs/page tables.
For users of walk_page_range() the solution is to simply call pte_hole()
immediately without checking the actual page tables when a VMA is not
present. We now never call __walk_page_range() without a valid vma.
For walk_page_range_novma() the locking requirements are tightened to
require the mmap write lock to be taken, and then walking the pgd
directly with 'no_vma' set.
This in turn means that all page walkers either have a valid vma, or
it's that special 'novma' case for page table debugging. As a result,
all the odd '(!walk->vma && !walk->no_vma)' tests can be removed.
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We sometimes copy all the addresses from the 802.11 header
for the AAD, which may cause complaints from fortify checks.
Use struct_group() to avoid the compiler warnings/errors.
Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An invalid packet with a length shorter than the specified length in the
netlink header can lead to use-after-frees and slab-out-of-bounds in the
processing of the netlink attributes, such as the following:
BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010
Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12
Workqueue: events hwsim_virtio_rx_work
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5d
print_report.cold+0x5e/0x5e5
kasan_report+0xb1/0x1c0
__nla_validate_parse+0x1258/0x2010
__nla_parse+0x22/0x30
hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0
hwsim_virtio_rx_work+0x1b2/0x370
process_one_work+0x8df/0x1530
worker_thread+0x575/0x11a0
kthread+0x29d/0x340
ret_from_fork+0x22/0x30
</TASK>
Discarding packets with an invalid length solves this.
Therefore, skb->len must be set at reception.
Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If we hit an authentication or association timeout, we only
release the chanctx for the deflink, and the other link(s)
are released later by ieee80211_vif_set_links(), but we're
not locking this correctly.
Fix the locking here while releasing the channels and links.
Change-Id: I9e08c1a5434592bdc75253c1abfa6c788f9f39b1
Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the prep_channel error case we didn't release the deflink
channel leaving it to be left around. Fix that.
Change-Id: If0dfd748125ec46a31fc6045a480dc28e03723d2
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The rx data link pointer isn't set from the RX aggregation timer,
resulting in a later warning. Fix that by setting it to the first
valid link for now, with a FIXME to worry about statistics later,
it's not very important since it's just the timeout case.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/498d714c-76be-9d04-26db-a1206878de5e@redhat.com
Fixes: 56057da4569b ("wifi: mac80211: rx: track link in RX data")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Return the value pa_to_nid() directly instead of storing it in another
redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The kernel build error when unslected CONFIG_MEMORY_HOTREMOVE because
arch_remove_memory() is needed by mm/memory_hotplug.c but undefined.
Some build error messages like:
LD vmlinux.o
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
loongarch64-linux-gnu-ld: mm/memory_hotplug.o: in function `.L242':
memory_hotplug.c:(.ref.text+0x930): undefined reference to `arch_remove_memory'
make: *** [Makefile:1169：vmlinux] 错误 1
Removed CONFIG_MEMORY_HOTREMOVE requirement and rearrange the file refer
to the definitions of other platform architectures.
Signed-off-by: Yupeng Li <liyupeng@zbhlos.com>
Signed-off-by: Caicai <caizp2008@163.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now acpi_os_ioremap() is marked with __init because it calls memblock_
is_memory() which is also marked with __init in the !ARCH_KEEP_MEMBLOCK
case. However, acpi_os_ioremap() is called by ordinary functions such
as acpi_os_{read, write}_memory() and causes section mismatch warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_read_memory (section: .text) -> acpi_os_ioremap (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_write_memory (section: .text) -> acpi_os_ioremap (section: .init.text)
Fix these warnings by selecting ARCH_KEEP_MEMBLOCK unconditionally and
removing the __init modifier of acpi_os_ioremap(). This can also give a
chance to track "memory" and "reserved" memblocks after early boot.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
1, Use nr/nx to replace ri/xi;
2, Add 0x prefix for hexadecimal data.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit 8ba62d37949e248c69 ("task_work: Call tracehook_notify_signal from
get_signal on all architectures") adjust arch_do_signal_or_restart() for
all architectures. LoongArch hasn't been upstream yet at that time and
can be still built successfully without adjustment because this function
has a weak version with the correct prototype. It is obviously that we
should convert LoongArch to use new API, otherwise some signal handlings
will be lost.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Ensure that all input sections are listed explicitly in the linker
script, and issue a warning otherwise. This ensures that the binary
image matches the PE/COFF and other image metadata exactly, which is
important for things like code signing.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-02 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Przemyslaw adds reset to ADQ configuration to allow for setting of rate
limit beyond TC0 for i40e.
Ivan Vecera does not free client on failure to open which could cause
NULL pointer dereference to occur on i40e. He also detaches device
during reset to prevent NDO calls with could cause races for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
This series contains updates to ice driver only.
Przemyslaw fixes memory leak of DMA memory due to incorrect freeing of
rx_buf.
Michal S corrects incorrect call to free memory.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After driver refactoring we was running ksz9477 specific CPU port
configuration on ksz8 family which ended with kernel oops. So, make sure
we run this code only on ksz9477 compatible devices.
Tested on KSZ8873 and KSZ9477.
Fixes: da8cd08520f3 ("net: dsa: microchip: add support for common phylink mac link up")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removing 'hotplug-status' in backend_disconnected() means that it will be
removed even in the case that the frontend unilaterally disconnects (which
it is free to do at any time). The consequence of this is that, when the
frontend attempts to re-connect, the backend gets stuck in 'InitWait'
rather than moving straight to 'Connected' (which it can do because the
hotplug script has already run).
Instead, the 'hotplug-status' mode should be removed in netback_remove()
i.e. when the vif really is going away.
Fixes: 0f4558ae9187 ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 6b66ca0bac1b9cee7608d7c4dc59b699458b4cb8 as it
breaks the build on some arches as reported by the kernel test robot.
Link: https://lore.kernel.org/r/202209030824.SouwDV5M-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 6b66ca0bac1b ("arch_topology: Make cluster topology span at least SMT CPUs")
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ionela Voinescu <ionela.voinescu@arm.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Mutexes cannot be taken in a non-preemptible context,
causing a panic in `fec_ptp_save_state()`. Replacing
`ptp_clk_mutex` by `tmreg_lock` fixes this.
Fixes: 6a4d7234ae9a ("net: fec: ptp: avoid register access when ipg clock is disabled")
Fixes: f79959220fa5 ("fec: Restart PPS after link state change")
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/20220827160922.642zlcd5foopozru@pengutronix.de/
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis iMX6
Link: https://lore.kernel.org/r/20220901140402.64804-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a very low probability that tx timeout will occur during
suspend and resume stress test on imx6q platform. So we add pm_qos
support to prevent system from entering low level idles which may
affect the transmission of tx.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20220830070148.2021947-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Florian Westphal says:
====================
netfilter: bug fixes for net
1. Fix IP address check in irc DCC conntrack helper, this should check
the opposite direction rather than the destination address of the
packets' direction, from David Leadbeater.
2. bridge netfilter needs to drop dst references, from Harsh Modi.
This was fine back in the day the code was originally written,
but nowadays various tunnels can pre-set metadata dsts on packets.
3. Remove nf_conntrack_helper sysctl and the modparam toggle, users
need to explicitily assign the helpers to use via nftables or
iptables. Conntrack helpers, by design, may be used to add dynamic
port redirections to internal machines, so its necessary to restrict
which hosts/peers are allowed to use them.
It was discovered that improper checking in the irc DCC helper makes
it possible to trigger the 'please do dynamic port forward'
from outside by embedding a 'DCC' in a PING request; if the client
echos that back a expectation/port forward gets added.
The auto-assign-for-everything mechanism has been in "please don't do this"
territory since 2012. From Pablo.
4. Fix a memory leak in the netdev hook error unwind path, also from Pablo.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack_irc: Fix forged IP logic
netfilter: nf_tables: clean up hook list when offload flags check fails
netfilter: br_netfilter: Drop dst references before setting.
netfilter: remove nf_conntrack_helper sysctl and modparam toggles
====================
Link: https://lore.kernel.org/r/20220901071238.3044-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- error handling fix for the new auth code (Hannes Reinecke)
- fix unhandled tcp states in nvmet_tcp_state_change (Maurizio
Lombardi)
- add NVME_QUIRK_BOGUS_NID for Lexar NM610 (Shyamin Ayesh)
- Add documentation for the ublk driver merged in this merge window
(Ming)
* tag 'block-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
Documentation: document ublk
nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()
nvmet-auth: add missing goto in nvmet_setup_auth()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610
|
|
Pull io_uring fixes from Jens Axboe:
- A single fix for over-eager retries for networking (Pavel)
- Revert the notification slot support for zerocopy sends.
It turns out that even after more than a year or development and
testing, there's not full agreement on whether just using plain
ordered notifications is Good Enough to avoid the complexity of using
the notifications slots. Because of that, we decided that it's best
left to a future final decision.
We can always bring back this feature, but we can't really change it
or remove it once we've released 6.0 with it enabled. The reverts
leave the usual CQE notifications as the primary interface for
knowing when data was sent, and when it was acked. (Pavel)
* tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
selftests/net: return back io_uring zc send tests
io_uring/net: simplify zerocopy send user API
io_uring/notif: remove notif registration
Revert "io_uring: rename IORING_OP_FILES_UPDATE"
Revert "io_uring: add zc notification flush requests"
selftests/net: temporarily disable io_uring zc test
io_uring/net: fix overexcessive retries
|
|
Pull cifs fixes from Steve French:
"Five fixes, all also marked for stable:
- fixes for collapse range and insert range (also fixes xfstest
generic/031)
- memory leak fix"
* tag '6.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix small mempool leak in SMB2_negotiate()
smb3: use filemap_write_and_wait_range instead of filemap_write_and_wait
smb3: fix temporary data corruption in insert range
smb3: fix temporary data corruption in collapse range
smb3: Move the flush out of smb2_copychunk_range() into its callers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a mis-handling of the LANDLOCK_ACCESS_FS_REFER right when
multiple rulesets/domains are stacked.
The expected behaviour was that an additional ruleset can only
restrict the set of permitted operations, but in this particular case,
it was potentially possible to re-gain the LANDLOCK_ACCESS_FS_REFER
right"
* tag 'landlock-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix file reparenting without explicit LANDLOCK_ACCESS_FS_REFER
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Fix workaround for SD UHS-I voltage switch
* tag 'mmc-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failure
mmc: core: Fix UHS-I SD 1.8V workaround branch
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull. One core dma-buf fix, then two weeks of i915
fixes, a lot of amdgpu fixes mostly for new IP, and a bunch of msm
fixes, mostly modesetting ones.
Nothing seems too bad at this point.
dma-buf/dma-resv:
- Fence-handling fix
i915:
- GVT fixes including fix for a CommetLake regression in mmio table
and misc doc and typo fixes
- Fix CCS handling
- Fix for guc requests after reset
- Display DSI related fixes
- Display backlight related fixes
- Fix for a null pointer dereference
- HDMI related quirk for ECS Liva Q2 with GLK graphics
- Skip wm/ddb readout for disabled pipes
amdgpu:
- FRU error message fix
- MES 11 updates
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- Fix possible use after free in CS IOCTL
- SMU 13.0.x fixes
- Fix iolink reporting on devices with direct connections to CPU
- GFX10 tap delay firmware fixes
msm:
- Fix for inconsistent indenting in msm_dsi_dphy_timing_calc_v3().
- Fix to make eDP the first connector in the connected list.
- Fix to populate intf_cfg correctly before calling reset_intf_cfg().
- Specify the correct number of DSI regulators for SDM660.
- Specify the correct number of DSI regulators for MSM8996.
- Fix for removing DP_RECOVERED_CLOCK_OUT_EN bit for tps4 link training
- Fix probe-deferral crash in gpu devfreq
- Fix gpu debugfs deadlock"
* tag 'drm-fixes-2022-09-02' of git://anongit.freedesktop.org/drm/drm: (51 commits)
drm/amd/amdgpu: skip ucode loading if ucode_size == 0
drm/amdgpu: only init tap_delay ucode when it's included in ucode binary
drm/amd/display: Fix black flash when switching from ODM2to1 to ODMBypass
drm/amd/display: Fix check for stream and plane
drm/amd/display: Re-initialize viewport after pipe merge
drm/amd/display: Use correct plane for CAB cursor size allocation
drm/amdgpu: ensure no PCIe peer access for CPU XGMI iolinks
drm/amd/pm: bump SMU 13.0.0 driver_if header version
drm/amd/pm: use vbios carried pptable for all SMU13.0.7 SKUs
drm/amd/pm: use vbios carried pptable for those supported SKUs
drm/amd/display: fix wrong register access
drm/amd/display: use actual cursor size instead of max for CAB allocation
drm/amd/display: disable display fresh from MALL on an edge case for DCN321
drm/amd/display: Fix CAB cursor size allocation for DCN32/321
drm/amd/display: Missing HPO instance added
drm/amd/display: set dig fifo read start level to 7 before dig fifo reset
drm/amdgpu: Fix use-after-free in amdgpu_cs_ioctl
drm/amd/display: Fix OTG H timing reset for dcn314
drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming
drm/amdgpu: Update mes_v11_api_def.h
...
|
