| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, bpf and wireless.
Current release - regressions:
- bpf:
- fix wrong last sg check in sk_msg_recvmsg()
- fix kernel BUG in purge_effective_progs()
- mac80211:
- fix possible leak in ieee80211_tx_control_port()
- potential NULL dereference in ieee80211_tx_control_port()
Current release - new code bugs:
- nfp: fix the access to management firmware hanging
Previous releases - regressions:
- ip: fix triggering of 'icmp redirect'
- sched: tbf: don't call qdisc_put() while holding tree lock
- bpf: fix corrupted packets for XDP_SHARED_UMEM
- bluetooth: hci_sync: fix suspend performance regression
- micrel: fix probe failure
Previous releases - always broken:
- tcp: make global challenge ack rate limitation per net-ns and
default disabled
- tg3: fix potential hang-up on system reboot
- mac802154: fix reception for no-daddr packets
Misc:
- r8152: add PID for the lenovo onelink+ dock"
* tag 'net-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
net/smc: Remove redundant refcount increase
Revert "sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb"
tcp: make global challenge ack rate limitation per net-ns and default disabled
tcp: annotate data-race around challenge_timestamp
net: dsa: hellcreek: Print warning only once
ip: fix triggering of 'icmp redirect'
sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb
selftests: net: sort .gitignore file
Documentation: networking: correct possessive "its"
kcm: fix strp_init() order and cleanup
mlxbf_gige: compute MDIO period based on i1clk
ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler
net: lan966x: improve error handle in lan966x_fdma_rx_get_frame()
nfp: fix the access to management firmware hanging
net: phy: micrel: Make the GPIO to be non-exclusive
net: virtio_net: fix notification coalescing comments
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
net: sched: tbf: don't call qdisc_put() while holding tree lock
net: Use u64_stats_fetch_begin_irq() for stats fetch.
net: dsa: xrs700x: Use irqsave variant for u64 stats update
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- A fix from Waiman Long to avoid a theoretical deadlock reported by
lockdep.
* tag 'slab-for-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just handful changes at this time. The only major change is the
regression fix about the x86 WC-page buffer allocation.
The rest are trivial data-race fixes for ALSA sequencer core, the
possible out-of-bounds access fixes in the new ALSA control hash code,
and a few device-specific workarounds and fixes"
* tag 'sound-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add quirk for LH Labs Geek Out HD Audio 1V5
ALSA: hda/realtek: Add speaker AMP init for Samsung laptops with ALC298
ALSA: control: Re-order bounds checking in get_ctl_id_hash()
ALSA: control: Fix an out-of-bounds bug in get_ctl_id_hash()
ALSA: hda: intel-nhlt: Correct the handling of fmt_config flexible array
ALSA: seq: Fix data-race at module auto-loading
ALSA: seq: oss: Fix data-race for max_midi_devs access
ALSA: memalloc: Revive x86-specific WC page allocations again
|
|
We have to copy only selected fields from the original resource.
Because a PCI device will be removed immediately after getting
its resources, we may not use any allocated data, hence we may
not copy any pointers.
Consider the following scenario:
1/ a caller of p2sb_bar() gets the resource;
2/ the resource has been copied by platform_device_add_data()
in order to create a platform device;
3/ the platform device creation will call for the device driver's
->probe() as soon as a match found;
4/ the ->probe() takes given resources (see 2/) and tries to
access one of its field, i.e. 'name', in the
__devm_ioremap_resource() to create a pretty looking output;
5/ but the 'name' is a dangling pointer because p2sb_bar()
removed a PCI device, which 'name' had been copied to
the caller's memory.
6/ UAF (Use-After-Free) as a result.
Kudos to Mika for the initial analisys of the issue.
Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Reported-by: kernel test robot <oliver.sang@intel.com>
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/linux-i2c/YvPCbnKqDiL2XEKp@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/linux-i2c/YtjAswDKfiuDfWYs@xsang-OptiPlex-9020/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220901113406.65876-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix for TUF laptops returning with an -ENOSPC on calling
asus_wmi_evaluate_method_buf() when fetching default curves. The TUF method
requires at least 32 bytes space.
This also moves and changes the pr_debug() in fan_curve_check_present() to
pr_warn() in fan_curve_get_factory_default() so that there is at least some
indication in logs of why it fails.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220828074638.5473-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In the case of firmware-upload, an instance of struct fw_upload is
allocated in firmware_upload_register(). This data needs to be freed
in fw_dev_release(). Create a new fw_upload_free() function in
sysfs_upload.c to handle the firmware-upload specific memory frees
and incorporate the missing kfree call for the fw_upload structure.
Fixes: 97730bbb242c ("firmware_loader: Add firmware-upload support")
Cc: stable <stable@kernel.org>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220831002518.465274-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the following code within firmware_upload_unregister(), the call to
device_unregister() could result in the dev_release function freeing the
fw_upload_priv structure before it is dereferenced for the call to
module_put(). This bug was found by the kernel test robot using
CONFIG_KASAN while running the firmware selftests.
device_unregister(&fw_sysfs->dev);
module_put(fw_upload_priv->module);
The problem is fixed by copying fw_upload_priv->module to a local variable
for use when calling device_unregister().
Fixes: 97730bbb242c ("firmware_loader: Add firmware-upload support")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220829174557.437047-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Previously 'make ARCH=um headers' stopped because of missing
arch/um/include/uapi/asm/Kbuild.
The error is not shown since commit ed102bf2afed ("um: Fix W=1
missing-include-dirs warnings") added arch/um/include/uapi/asm/Kbuild.
Hard-code the unsupported architecture, so it works like before.
Fixes: ed102bf2afed ("um: Fix W=1 missing-include-dirs warnings")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
|
|
Enable io_uring zerocopy send tests back and fix them up to follow the
new inteface.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c8e5018c516093bdad0b6e19f2f9847dea17e4d2.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Following user feedback, this patch simplifies zerocopy send API. One of
the main complaints is that the current API is difficult with the
userspace managing notification slots, and then send retries with error
handling make it even worse.
Instead of keeping notification slots change it to the per-request
notifications model, which posts both completion and notification CQEs
for each request when any data has been sent, and only one CQE if it
fails. All notification CQEs will have IORING_CQE_F_NOTIF set and
IORING_CQE_F_MORE in completion CQEs indicates whether to wait a
notification or not.
IOSQE_CQE_SKIP_SUCCESS is disallowed with zerocopy sends for now.
This is less flexible, but greatly simplifies the user API and also the
kernel implementation. We reuse notif helpers in this patch, but in the
future there won't be need for keeping two requests.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/95287640ab98fc9417370afb16e310677c63e6ce.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're going to remove the userspace exposed zerocopy notification API,
remove notification registration.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6ff00b97be99869c386958a990593c9c31cf105b.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 4379d5f15b3fd4224c37841029178aa8082a242e.
We removed notification flushing, also cleanup uapi preparation changes
to not pollute it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/89edc3905350f91e1b6e26d9dbf42ee44fd451a2.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 492dddb4f6e3a5839c27d41ff1fecdbe6c3ab851.
Soon we won't have the very notion of notification flushing, so remove
notification flushing requests.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8850334ca56e65b413cb34fd158db81d7b2865a3.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're going to change API, to avoid build problems with a couple of
following commits, disable io_uring testing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/12b7507223df04fbd12aa05fc0cb544b51d7ed79.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The NFSv4.0 protocol only supports open() by name. It cannot therefore
be used with open_by_handle() and friends, nor can it be re-exported by
knfsd.
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes: 20fa19027286 ("nfs: add export operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
We need to make sure that the req->rq_private_buf is completely up to
date before we make req->rq_reply_bytes_recvd visible to the
call_decode() routine in order to avoid triggering the WARN_ON().
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 72691a269f0b ("SUNRPC: Don't reuse bvec on retransmission of the request")
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Architectures which do not have cacheinfo such as ARM 32-bit would spit
out the following during boot:
Early cacheinfo failed, ret = -2
Treat -ENOENT specifically to silence this error since it means that the
platform does not support reporting its cache information.
Fixes: 3fcbf1c77d08 ("arch_topology: Fix cache attributes detection in the CPU hotplug path")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Michael Walle <michael@walle.cc>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220805230736.1562801-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Syzbot reported a couple issues introduced by commit 44e602b4e52f
("binder_alloc: add missing mmap_lock calls when using the VMA"), in
which we attempt to acquire the mmap_lock when alloc->vma_vm_mm has not
been initialized yet.
This can happen if a binder_proc receives a transaction without having
previously called mmap() to setup the binder_proc->alloc space in [1].
Also, a similar issue occurs via binder_alloc_print_pages() when we try
to dump the debugfs binder stats file in [2].
Sample of syzbot's crash report:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
CPU: 0 PID: 3755 Comm: syz-executor229 Not tainted 6.0.0-rc1-next-20220819-syzkaller #0
syz-executor229[3755] cmdline: ./syz-executor2294415195
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
RIP: 0010:__lock_acquire+0xd83/0x56d0 kernel/locking/lockdep.c:4923
[...]
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5666 [inline]
lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631
down_read+0x98/0x450 kernel/locking/rwsem.c:1499
mmap_read_lock include/linux/mmap_lock.h:117 [inline]
binder_alloc_new_buf_locked drivers/android/binder_alloc.c:405 [inline]
binder_alloc_new_buf+0xa5/0x19e0 drivers/android/binder_alloc.c:593
binder_transaction+0x242e/0x9a80 drivers/android/binder.c:3199
binder_thread_write+0x664/0x3220 drivers/android/binder.c:3986
binder_ioctl_write_read drivers/android/binder.c:5036 [inline]
binder_ioctl+0x3470/0x6d00 drivers/android/binder.c:5323
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
==================================================================
Fix these issues by setting up alloc->vma_vm_mm pointer during open()
and caching directly from current->mm. This guarantees we have a valid
reference to take the mmap_lock during scenarios described above.
[1] https://syzkaller.appspot.com/bug?extid=f7dc54e5be28950ac459
[2] https://syzkaller.appspot.com/bug?extid=a75ebe0452711c9e56d9
Fixes: 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+f7dc54e5be28950ac459@syzkaller.appspotmail.com
Reported-by: syzbot+a75ebe0452711c9e56d9@syzkaller.appspotmail.com
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220829201254.1814484-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SC8280XP platform uses 14 sessions for the compute DSP so increment
the maximum session count.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220829080531.29681-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe session-duplication overflow check incremented the session
count also when there were no more available sessions so that memory
beyond the fixed-size slab-allocated session array could be corrupted in
fastrpc_session_alloc() on open().
Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220829080531.29681-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the missing sanity check on the probed-session count to avoid
corrupting memory beyond the fixed-size slab-allocated session array
when there are more than FASTRPC_MAX_SESSIONS sessions defined in the
devicetree.
Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220829080531.29681-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.0
- error handling fix for the new auth code (Hannes Reinecke)
- fix unhandled tcp states in nvmet_tcp_state_change (Maurizio Lombardi)
- add NVME_QUIRK_BOGUS_NID for Lexar NM610 (Shyamin Ayesh)"
* tag 'nvme-6.0-2022-09-01' of git://git.infradead.org/nvme:
nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()
nvmet-auth: add missing goto in nvmet_setup_auth()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610
|
|
Since the HC driver is now passed to the function with its
own parameter (it used to be picked from id->driver_data),
the id parameter serves no purpose.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220831125052.71584-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver for the PPC Freescale SoC is using device tree
accessors and imperative GPIO semantics control using the old
GPIO API, switch it over to use GPIO descriptors.
Cc: Li Yang <leoyang.li@nxp.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Zhao Qiang <qiang.zhao@freescale.com>
Cc: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220831082932.488724-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USB external storage device(0x0b05:1932), use gnome-disk-utility tools
to test usb write < 30MB/s.
if does not to load module of uas for this device, can increase the
write speed from 20MB/s to >40MB/s.
Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hu Xiaoying <huxiaoying@kylinos.cn>
Link: https://lore.kernel.org/r/20220901045737.3438046-1-huxiaoying@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both __device_attach_driver() and __driver_attach() check the return
code of the bus_type.match() function to see if the device needs to be
added to the deferred probe list. After adding the device to the list,
the logic attempts to bind the device to the driver anyway, as if the
device had matched with the driver, which is not correct.
If __device_attach_driver() detects that the device in question is not
ready to match with a driver on the bus, then it doesn't make sense for
the device to attempt to bind with the current driver or continue
attempting to match with any of the other drivers on the bus. So, update
the logic in __device_attach_driver() to reflect this.
If __driver_attach() detects that a driver tried to match with a device
that is not ready to match yet, then the driver should not attempt to bind
with the device. However, the driver can still attempt to match and bind
with other devices on the bus, as drivers can be bound to multiple
devices. So, update the logic in __driver_attach() to reflect this.
Fixes: 656b8035b0ee ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: stable@vger.kernel.org
Cc: Saravana Kannan <saravanak@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20220817184026.3468620-1-isaacmanjarres@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
One of the former changes for the endpoint management was the more
consistent setup of endpoints at hw_params.
snd_usb_endpoint_configure() is a single function that does the full
setup, and it's called from both PCM hw_params and prepare callbacks.
Although the EP setup at the prepare phase is usually skipped (by
checking need_setup flag), it may be still effective in some cases
like suspend/resume that requires the interface setup again.
As it's a full and single setup, the invocation of
snd_usb_endpoint_configure() includes not only the USB interface setup
but also the buffer release and allocation. OTOH, doing the buffer
release and re-allocation at PCM prepare phase is rather superfluous,
and better to be done only in the hw_params phase.
For those optimizations, this patch splits the endpoint setup to two
phases: snd_usb_endpoint_set_params() and snd_usb_endpoint_prepare(),
to be called from hw_params and from prepare, respectively.
Note that this patch changes the driver operation slightly,
effectively moving the USB interface setup again to PCM prepare stage
instead of hw_params stage, while the buffer allocation and such
initializations are still done at hw_params stage.
And, the change of the USB interface setup timing (moving to prepare)
gave an interesting "fix", too: it was reported that the recent
kernels caused silent output at the beginning on playbacks on some
devices on Android, and this change casually fixed the regression.
It seems that those devices are picky about the sample rate change (or
the interface change?), and don't follow the too immediate rate
changes.
Meanwhile, Android operates the PCM in the following order:
- open, then hw_params with the possibly highest sample rate
- close without prepare
- re-open, hw_params with the normal sample rate
- prepare, and start streaming
This procedure ended up the hw_params twice with different rates, and
because the recent kernel did set up the sample rate twice one and
after, it screwed up the device. OTOH, the earlier kernels didn't set
up the USB interface at hw_params, hence this problem didn't appear.
Now, with this patch, the USB interface setup is again back to the
prepare phase, and it works around the problem automagically.
Although we should address the sample rate problem in a more solid
way in future, let's keep things working as before for now.
Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management")
Cc: <stable@vger.kernel.org>
Reported-by: chihhao chen <chihhao.chen@mediatek.com>
Link: https://lore.kernel.org/r/87e6d6ae69d68dc588ac9acc8c0f24d6188375c3.camel@mediatek.com
Link: https://lore.kernel.org/r/20220901124136.4984-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove 'NULL' check for 'data->hpdev.client' in error flow of
mlxreg_lc_probe(). It cannot be 'NULL' at this point.
Fixes: b4b830a34d80 ("platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220823201937.46855-5-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove redundant 'NULL' check for of if 'data->notifier'.
Replace 'return err' by 'return 0' in mlxreg_lc_probe().
Fixes: 62f9529b8d5c87b ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220823201937.46855-4-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix locking issues:
- mlxreg_lc_state_update() takes a lock when set or clear
"MLXREG_LC_POWERED".
- All the devices can be deleted before MLXREG_LC_POWERED flag is cleared.
To fix it:
- Add lock() / unlock() at the beginning / end of
mlxreg_lc_event_handler() and remove locking from
mlxreg_lc_power_on_off() and mlxreg_lc_enable_disable()
- Add locked version of mlxreg_lc_state_update() -
mlxreg_lc_state_update_locked() for using outside
mlxreg_lc_event_handler().
(2) Remove redundant NULL check for of if 'data->notifier'.
Fixes: 62f9529b8d5c87b ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220823201937.46855-3-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix smatch warning:
drivers/platform/mellanox/mlxreg-lc.c:866 mlxreg_lc_probe() warn: passing zero to 'PTR_ERR'
by removing 'err = PTR_ERR(regmap)'.
Fixes: b4b830a34d80 ("platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220823201937.46855-2-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
2 keymap fixes for the Acer Aspire One AOD270 and the same hardware
rebranded as Packard Bell Dot SC:
1. The F2 key is marked with a big '?' symbol on the Packard Bell Dot SC,
this sends WMID_HOTKEY_EVENTs with a scancode of 0x27 add a mapping
for this.
2. Scancode 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate
input event with the "Video Bus" input device events. But on these devices
the "Video Bus" does not send events for this key. Map 0x61 to KEY_UNKNOWN
instead of using KE_IGNORE so that udev/hwdb can override it on these devs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220829163544.5288-1-hdegoede@redhat.com
|
|
The logic that conditionally allocates one additional page at each
swapper page table level if KASLR is enabled is also applied to the
initial ID map, now that we have started using the same set of macros
to allocate the space for it.
However, the placement of the kernel in physical memory might result in
additional pages being needed at any level, even if KASLR is disabled in
the build. So account for this in the computation.
Fixes: c3cee924bd85 ("arm64: head: cover entire kernel image in initial ID map")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220826164800.2059148-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The platform_get_irq() returns negative error codes. It can't actually
return zero.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20220825011844.8536-1-yuzhe@nfschina.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Even non-KASLR kernels can be built as relocatable, to work around
broken bootloaders that violate the rules regarding physical placement
of the kernel image - in this case, the physical offset modulo 2 MiB is
used as the KASLR offset, and all absolute symbol references are fixed
up in the usual way. This workaround is enabled by default.
CONFIG_RELOCATABLE can also be disabled entirely, in which case the
relocation code and the code that captures the offset are omitted from
the build. However, since commit aacd149b6238 ("arm64: head: avoid
relocating the kernel twice for KASLR"), this code got out of sync, and
we still add the offset to the kernel virtual address before populating
the page tables even though we never capture it. This means we add a
bogus value instead, breaking the boot entirely.
Fixes: aacd149b6238 ("arm64: head: avoid relocating the kernel twice for KASLR")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20220827070904.2216989-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Like crashk_res, Calling crash_exclude_mem_range function with
crashk_low_res area would need extra crash_mem range too.
Add one more extra cmem slot in case of crashk_low_res is used.
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Fixes: 944a45abfabc ("arm64: kdump: Reimplement crashkernel=X")
Cc: <stable@vger.kernel.org> # 5.19.x
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220831103913.12661-1-ppbuk5246@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Remove rxrpc_get_reply_time() as that is no longer used now that the call
issue time is used instead of the reply time.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
rxrpc and kafs between them try to use the receive timestamp on the first
data packet (ie. the one with sequence number 1) as a base from which to
calculate the time at which callback promise and lock expiration occurs.
However, we don't know how long it took for the server to send us the reply
from it having completed the basic part of the operation - it might then,
for instance, have to send a bunch of a callback breaks, depending on the
particular operation.
Fix this by using the time at which the operation is issued on the client
as a base instead. That should never be longer than the server's idea of
the expiry time.
Fixes: 781070551c26 ("afs: Fix calculation of callback expiry time")
Fixes: 2070a3e44962 ("rxrpc: Allow the reply time to be obtained on a client call")
Suggested-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix the calculation of the resend age to add a microsecond value as
microseconds, not nanoseconds.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
If the local processor work item for the rxrpc local endpoint gets requeued
by an event (such as an incoming packet) between it getting scheduled for
destruction and the UDP socket being closed, the rxrpc_local_destroyer()
function can get run twice. The second time it can hang because it can end
up waiting for cleanup events that will never happen.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
rxkad_verify_packet_2() has a small stack-allocated sglist of 4 elements,
but if that isn't sufficient for the number of fragments in the socket
buffer, we try to allocate an sglist large enough to hold all the
fragments.
However, for large packets with a lot of fragments, this isn't sufficient
and we need at least one additional fragment.
The problem manifests as skb_to_sgvec() returning -EMSGSIZE and this then
getting returned by userspace. Most of the time, this isn't a problem as
rxrpc sets a limit of 5692, big enough for 4 jumbo subpackets to be glued
together; occasionally, however, the server will ignore the reported limit
and give a packet that's a lot bigger - say 19852 bytes with ->nr_frags
being 7. skb_to_sgvec() then tries to return a "zeroth" fragment that
seems to occur before the fragments counted by ->nr_frags and we hit the
end of the sglist too early.
Note that __skb_to_sgvec() also has an skb_walk_frags() loop that is
recursive up to 24 deep. I'm not sure if I need to take account of that
too - or if there's an easy way of counting those frags too.
Fix this by counting an extra frag and allocating a larger sglist based on
that.
Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
|
|
Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing
it to siphon off UDP packets early in the handling of received UDP packets
thereby avoiding the packet going through the UDP receive queue, it doesn't
get ICMP packets through the UDP ->sk_error_report() callback. In fact, it
doesn't appear that there's any usable option for getting hold of ICMP
packets.
Fix this by adding a new UDP encap hook to distribute error messages for
UDP tunnels. If the hook is set, then the tunnel driver will be able to
see ICMP packets. The hook provides the offset into the packet of the UDP
header of the original packet that caused the notification.
An alternative would be to call the ->error_handler() hook - but that
requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error()
do, though isn't really necessary or desirable in rxrpc's case is we want
to parse them there and then, not queue them).
Changes
=======
ver #3)
- Fixed an uninitialised variable.
ver #2)
- Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals.
Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
slab_mutex/cpu_hotplug_lock
A circular locking problem is reported by lockdep due to the following
circular locking dependency.
+--> cpu_hotplug_lock --> slab_mutex --> kn->active --+
| |
+-----------------------------------------------------+
The forward cpu_hotplug_lock ==> slab_mutex ==> kn->active dependency
happens in
kmem_cache_destroy(): cpus_read_lock(); mutex_lock(&slab_mutex);
==> sysfs_slab_unlink()
==> kobject_del()
==> kernfs_remove()
==> __kernfs_remove()
==> kernfs_drain(): rwsem_acquire(&kn->dep_map, ...);
The backward kn->active ==> cpu_hotplug_lock dependency happens in
kernfs_fop_write_iter(): kernfs_get_active();
==> slab_attr_store()
==> cpu_partial_store()
==> flush_all(): cpus_read_lock()
One way to break this circular locking chain is to avoid holding
cpu_hotplug_lock and slab_mutex while deleting the kobject in
sysfs_slab_unlink() which should be equivalent to doing a write_lock
and write_unlock pair of the kn->active virtual lock.
Since the kobject structures are not protected by slab_mutex or the
cpu_hotplug_lock, we can certainly release those locks before doing
the delete operation.
Move sysfs_slab_unlink() and sysfs_slab_release() to the newly
created kmem_cache_release() and call it outside the slab_mutex &
cpu_hotplug_lock critical sections. There will be a slight delay
in the deletion of sysfs files if kmem_cache_release() is called
indirectly from a work function.
Fixes: 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Link: https://lore.kernel.org/all/YwOImVd+nRUsSAga@hyeyoo/
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
"USB-serial fixes for 6.0-rc4
Here are a couple of fixes for two long-standing issues with some older
ch341 devices and a number of new device ids.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.0-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: ch341: fix disabled rx timer on older devices
USB: serial: ch341: fix lost character on LCR updates
USB: serial: cp210x: add Decagon UCA device id
USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode
USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id
USB: serial: option: add Quectel EM060K modem
USB: serial: option: add support for OPPO R11 diag port
|
|
This patch updates device status array range from 11 to 12 as we will
be reading status from device number 0 to device number 11 inclusive.
Without this patch we can potentially access status array out of range
during auto-enumeration.
Fixes: aa1262ca6695 ("soundwire: qcom: Check device status before reading devid")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220708104747.8722-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When the delayed registration is specified via either delayed_register
option or the quirk, we delay the invocation of snd_card_register()
until the given interface. But if a wrong value has been set there
and there are more interfaces over the given interface number,
snd_card_register() call would be missing for those interfaces.
This patch catches up those missing calls by fixing the comparison of
the interface number. Now the call is skipped only if the processed
interface is less than the given interface, instead of the exact
match.
Fixes: b70038ef4fea ("ALSA: usb-audio: Add delayed_register option")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082
Link: https://lore.kernel.org/r/20220831125901.4660-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The info message that was added in the commit a4aad5636c72 ("ALSA:
usb-audio: Inform devices that need delayed registration") is actually
useful to know the need for the delayed registration. However, it
turned out that this doesn't catch the all cases; namely, this warned
only when a PCM stream is attached onto the existing PCM instance, but
it doesn't count for a newly created PCM instance. This made
confusion as if there were no further delayed registration.
This patch moves the check to the code path for either adding a stream
or creating a PCM instance. Also, make it simpler by checking the
card->registered flag instead of querying each snd_device state.
Fixes: a4aad5636c72 ("ALSA: usb-audio: Inform devices that need delayed registration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082
Link: https://lore.kernel.org/r/20220831125901.4660-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For passive connections, the refcount increment has been done in
smc_clcsock_accept()-->smc_sock_alloc().
Fixes: 3b2dec2603d5 ("net/smc: restructure client and server code in af_smc")
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220830152314.838736-1-liuyacan@corp.netease.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change fixes the following kernel NULL pointer dereference
which is reproduced by blktests srp/007 occasionally.
BUG: kernel NULL pointer dereference, address: 0000000000000170
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 9 Comm: kworker/0:1H Kdump: loaded Not tainted 6.0.0-rc1+ #37
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qemu.org 04/01/2014
Workqueue: 0x0 (kblockd)
RIP: 0010:srp_recv_done+0x176/0x500 [ib_srp]
Code: 00 4d 85 ff 0f 84 52 02 00 00 48 c7 82 80 02 00 00 00 00 00 00 4c 89 df 4c 89 14 24 e8 53 d3 4a f6 4c 8b 14 24 41 0f b6 42 13 <41> 89 87 70 01 00 00 41 0f b6 52 12 f6 c2 02 74 44 41 8b 42 1c b9
RSP: 0018:ffffaef7c0003e28 EFLAGS: 00000282
RAX: 0000000000000000 RBX: ffff9bc9486dea60 RCX: 0000000000000000
RDX: 0000000000000102 RSI: ffffffffb76bbd0e RDI: 00000000ffffffff
RBP: ffff9bc980099a00 R08: 0000000000000001 R09: 0000000000000001
R10: ffff9bca53ef0000 R11: ffff9bc980099a10 R12: ffff9bc956e14000
R13: ffff9bc9836b9cb0 R14: ffff9bc9557b4480 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff9bc97ec00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000170 CR3: 0000000007e04000 CR4: 00000000000006f0
Call Trace:
<IRQ>
__ib_process_cq+0xb7/0x280 [ib_core]
ib_poll_handler+0x2b/0x130 [ib_core]
irq_poll_softirq+0x93/0x150
__do_softirq+0xee/0x4b8
irq_exit_rcu+0xf7/0x130
sysvec_apic_timer_interrupt+0x8e/0xc0
</IRQ>
Fixes: ad215aaea4f9 ("RDMA/srp: Make struct scsi_cmnd and struct srp_request adjacent")
Link: https://lore.kernel.org/r/20220831081626.18712-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- GVT fixes including fix for a CommetLake regression in mmio table
and misc doc and typo fixes
- Fix CCS handling (Matt)
- Fix for guc requests after reset (Daniele)
- Display DSI related fixes (Jani)
- Display backlight related fixes (Arun, Jouni)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YwjCTDFm7clXPgEu@intel.com
|
