summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-11arm64: dts: mediatek: mt6795-xperia-m5: Add Sensortek STK3310 ProximityAngeloGioacchino Del Regno
Add the STK3310 Proximity sensor and its pins. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327083647.22017-17-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-04-11arm64: dts: mediatek: mt6795-xperia-m5: Add Synaptics RMI4 TouchscreenAngeloGioacchino Del Regno
Add the RMI4 Touchscreen on I2C2 and its pin definitions. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327083647.22017-14-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-04-11arm64: dts: mediatek: mt6795-xperia-m5: Enable I2C 0-3 bussesAngeloGioacchino Del Regno
Properly configure and enable the three i2c controllers that have devices attached on the Sony Xperia M5 smartphone. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327083647.22017-13-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-04-11arm64: dts: mediatek: mt6795: Add VDECSYS and VENCSYS clocksAngeloGioacchino Del Regno
In prepration for adding the IOMMUs and LARBs of this SoC, add the VDECSYS and VENCSYS clock controller nodes, providing clocks for the vcodec stateful decoder and stateful decoder hardware. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327083647.22017-11-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-04-11arm64: dts: qcom: Add base qrb4210-rb2 board dtsBhupesh Sharma
Add DTS for Qualcomm qrb4210-rb2 board which uses SM4250 SoC. This adds debug uart, emmc, uSD and tlmm support along with regulators found on this board. Also defines the 'xo_board' and 'sleep_clk' frequencies for this board. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> [bjorn: Squashed separate patch specifying regulator-system-load] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230411072840.2751813-3-bhupesh.sharma@linaro.org
2023-04-11dt-bindings: arm: qcom: Document the Qualcomm qrb4210-rb2 boardBhupesh Sharma
Document the Qualcomm qrb4210-rb2 board based on Robotics version of the Snapdragon SM4250 Soc, i.e. QRB4210. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230411072840.2751813-2-bhupesh.sharma@linaro.org
2023-04-08riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodesCristian Ciocaltea
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a bunch of different boards expect. The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not affected, since they are using a shared DMA channel for rx and tx. Hence, the first step in fixing the inconsistency was to change dma-names order in the binding to tx->rx. Do the same for the snps,dw-apb-uart nodes in the DTS file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230321215624.78383-7-cristian.ciocaltea@collabora.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-04-08ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodesCristian Ciocaltea
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a bunch of different boards expect. The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not affected, since they are using a shared DMA channel for rx and tx. Hence, the first step in fixing the inconsistency was to change dma-names order in the binding to tx->rx. Do the same for the snps,dw-apb-uart nodes in the DTS file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230321215624.78383-6-cristian.ciocaltea@collabora.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-04-08ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodesCristian Ciocaltea
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a bunch of different boards expect. The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not affected, since they are using a shared DMA channel for rx and tx. Hence, the first step in fixing the inconsistency was to change dma-names order in the binding to tx->rx. Do the same for the snps,dw-apb-uart nodes in the DTS file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230321215624.78383-5-cristian.ciocaltea@collabora.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-04-08ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodesCristian Ciocaltea
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a bunch of different boards expect. The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not affected, since they are using a shared DMA channel for rx and tx. Hence, the first step in fixing the inconsistency was to change dma-names order in the binding to tx->rx. Do the same for the snps,dw-apb-uart nodes in the DTS file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230321215624.78383-4-cristian.ciocaltea@collabora.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-04-08ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodesCristian Ciocaltea
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a bunch of different boards expect. The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not affected, since they are using a shared DMA channel for rx and tx. Hence, the first step in fixing the inconsistency was to change dma-names order in the binding to tx->rx. Do the same for the snps,dw-apb-uart nodes in the DTS file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230321215624.78383-3-cristian.ciocaltea@collabora.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-04-08arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBCMarek Vasut
Add support for Data Modul i.MX8M Plus eDM SBC board. This is an evaluation board for various custom display units. Currently supported are serial console, ethernet, eMMC, SD, SPI NOR, USB host and USB OTG. Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-07arm64: dts: qcom: sm8550: add Soundwire controllersKrzysztof Kozlowski
Add nodes for LPASS Soundwire v2.0.0 controllers. Use labels with indices matching downstream DTS, to make any comparisons easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230405061129.143553-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8250: Add GPU speedbin supportKonrad Dybcio
SM8250 has (at least) four GPU speed bins. With the support added on the driver side, wire up bin detection in the DTS to restrict lower-quality SKUs from running at frequencies they were not validated at. Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 II (speed bin 0x7) Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-5-2dede22dd7f7@linaro.org
2023-04-07arm64: dts: qcom: sm8150: Add GPU speedbin supportKonrad Dybcio
SM8150 has (at least) two GPU speed bins. With the support added on the driver side, wire up bin detection in the DTS to restrict lower-quality SKUs from running at frequencies they were not validated at. Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 (speed bin 0x3) Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-4-2dede22dd7f7@linaro.org
2023-04-07arm64: dts: qcom: sm8150: Don't start Adreno in headless modeKonrad Dybcio
Now that there's display support, there is no reason to assume the default mode for Adreno should be headless. Keep it like that for boards that previously enabled it, so as not to create regressions though. Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-3-2dede22dd7f7@linaro.org
2023-04-07ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of nodeManivannan Sadhasivam
To align with rest of the devicetree files, let's move the "status" property to the end of the nodes. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331145915.11653-2-manivannan.sadhasivam@linaro.org
2023-04-07ARM: dts: qcom: sdx55: Move reset and wake gpios to board dtsManivannan Sadhasivam
The reset and wake properties in the PCIe EP node belong to the board dts as they can be customized per board design. So let's move them from SoC dtsi. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331145915.11653-1-manivannan.sadhasivam@linaro.org
2023-04-07arm64: dts: qcom: ipq5332: add support for the RDP468 variantKathiravan T
Add the initial device tree support for the Reference Design Platform(RDP) 468 based on IPQ5332 family of SoCs. This patch carries the support for Console UART, SPI NOR, eMMC. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323093120.20558-3-quic_kathirav@quicinc.com
2023-04-07dt-bindings: arm: qcom: document MI01.6 board based on IPQ5332 familyKathiravan T
Document the MI01.6 (Reference Design Platform 468) board based on IPQ5332 family of SoCs. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323093120.20558-2-quic_kathirav@quicinc.com
2023-04-07arm64: dts: qcom: sdm630: move DSI opp-table out of DSI nodeKrzysztof Kozlowski
The DSI OPP table on SDM630 is used by one DSI0, but on SDM660 is shared by two nodes (DSI0 and DSI1), thus it should be rather in top-level, not in DSI0. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407192605.168666-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFiKonrad Dybcio
Enable the onboard QCA Wi-Fi. HW identifiers for reference: qmi chip_id 0x320 chip_family 0x4001 board_id 0xff soc_id 0x400e0000 Firmware sources: /vendor/firmware_mnt/image/wlanmdsp.bin -> qcom/.../wlanmdsp.mbn /vendor/firmware_mnt/image/bdwlan.bXX [1] -> [2] -> ath10k/.../board-2.bin [3] -> ath10k/.../firmware-5.bin Not sure where 3 comes from on the device itself, gotta investigate that.. According to [4], it's called WCN3990_STRAIT. [1] XX = board_id printed when the file is missing or by your downstream kernel firmware loader in the dmesg; if XX=ff, use bdwlan.bin [2] https://github.com/jhugo/linux/blob/5.5rc2_wifi/README [3] https://github.com/kvalo/ath10k-firmware/blob/master/WCN3990/hw1.0/HL3.1/WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1/firmware-5.bin [4] https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qca-wifi-host-cmn/-/blob/LA.VENDOR.1.0.r1-20700-WAIPIO.QSSI13.0/hif/src/hif_hw_version.h#L55 Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406-topic-lenovo_features-v2-4-625d7cb4a944@linaro.org
2023-04-07arm64: dts: qcom: sm6115p-j606f: Enable remoteprocsKonrad Dybcio
Enable the [AC]DSP and MPSS and specify the firmware paths. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406-topic-lenovo_features-v2-3-625d7cb4a944@linaro.org
2023-04-07arm64: dts: qcom: sm6115: Add RMTFSKonrad Dybcio
Add a node for RMTFS and associate it with MSA and NAV IDs to enable modem functionality on SM6115. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406-topic-lenovo_features-v2-2-625d7cb4a944@linaro.org
2023-04-07arm64: dts: qcom: sm6115-j606f: Add ramoops nodeKonrad Dybcio
Add a ramoops node to enable retrieving crash logs. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406-topic-lenovo_features-v2-1-625d7cb4a944@linaro.org
2023-04-07arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin configKrzysztof Kozlowski
Bindings require pin configuration nodes to have the function, even if it is GPIO: msm8916-thwc-ufi001c.dtb: pinctrl@1000000: sim-ctrl-default-state: 'oneOf' conditional failed, one must be fixed: 'esim-sel-pins', 'sim-en-pins', 'sim-sel-pins' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230324202244.744271-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8550: Add the Inline Crypto Engine nodeAbel Vesa
Add support for UFS ICE by adding the qcom,ice property and the ICE dedicated devicetree node. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407105029.2274111-7-abel.vesa@linaro.org
2023-04-07arm64: dts: MSM8953: Add lpass nodesAdam Skladowski
Add nodes for remoteproc, smp2p and smsm in preparation for audio support on this platform. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407165345.42800-4-a39.skl@gmail.com
2023-04-07arm64: dts: MSM8953: Add mpss nodesAdam Skladowski
Add nodes for remoteproc, smp2p and smsm to make it possible to use modem functionality on this platform. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407165345.42800-3-a39.skl@gmail.com
2023-04-07arm64: dts: MSM8953: Add wcnss nodesAdam Skladowski
Add nodes for remoteproc, smp2p and smsm to make it possible to use wifi/bt functionality on this platform. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407165345.42800-2-a39.skl@gmail.com
2023-04-07arm64: dts: qcom: sm8350: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407180655.128771-2-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8150: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407180655.128771-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: apq8016: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407180045.126952-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strengthKrzysztof Kozlowski
Fix typo in drive-strength property name. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407180710.128815-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sc8280xp-crd: correct pin drive-strengthKrzysztof Kozlowski
Fix typo in drive-strength property name. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407181541.139349-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8450: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-10-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8250: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-9-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6350: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-8-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6125: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-7-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sdm845: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-6-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sc8280xp: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-5-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: qcs404: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-4-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: msm8998: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-3-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: msm8996: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-2-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: msm8994: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6125: Initial support for xiaomi-laurel-sproutLux Aliaga
Add support for the Xiaomi Mi A3 (xiaomi-laurel-sprout). Here's a summary on what's defined. - dmesg output to bootloader preconfigured display - USB - UFS - SD card - SMD RPM regulators - Volume Up, Down and Power buttons - Thermistors Signed-off-by: Lux Aliaga <they@mint.lgbt> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306170817.3806-7-they@mint.lgbt
2023-04-07arm64: dts: qcom: sm6125: Add UFS nodesLux Aliaga
Adds a UFS host controller node and its corresponding PHY to the sm6125 platform. Signed-off-by: Lux Aliaga <they@mint.lgbt> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306170817.3806-5-they@mint.lgbt
2023-04-07dt-bindings: arm: qcom: Document xiaomi,laurel-sprout boardLux Aliaga
Document the Xiaomi Mi A3 (xiaomi-laurel-sprout) smartphone which is based on the Snapdragon 665 SoC. Signed-off-by: Lux Aliaga <they@mint.lgbt> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306170817.3806-6-they@mint.lgbt
2023-04-07arm64: dts: qcom: sm8250-xiaomi-elish-csot: Add Xiaomi Mi Pad 5 Pro CSOT variantJianhua Lu
Add support for the Xiaomi Mi Pad 5 Pro CSOT variant. The CSOT variant uses China Star Optoelectronics Technology (CSOT) panel based on NT36523 display controller. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323005925.23179-3-lujianhua000@gmail.com
2023-04-07arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panelJianhua Lu
Add nodes for BOE NT36523 panel found in xiaomi-elish. This panel is a dual dsi mode panel and the dsi phy type is cphy. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323005925.23179-2-lujianhua000@gmail.com
generated by cgit (git 2.34.1) at 2025-09-11 10:09:48 +0000