summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-21mmc: sdhci: if MAX_CURRENT is 0, try getting current from regulatorPhilip Rakity
The sd host controller spec indicates the the MAX_CURRENT value may be returned as 0. In this case other methods need to be used to return the current. If 0 is returned and there is a regulator, ask the regulator for how much current is available. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Reviewed-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sh_mmcif: support generic card-detectionGuennadi Liakhovetski
Extend the sh_mmcif driver to support GPIO card detection, provided by the slot function module. The original .get_cd() platform callback is also preserved for now. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: prohibit card detection when host is not readyGuennadi Liakhovetski
Currently mmc host drivers have to decide whether to enable card detection before calling mmc_add_host() -- in which case a card insertion event can arrive before the host has been completely initialised -- or after mmc_add_host(), in which case the initial card detection can be problematic. This patch adds an explicit indication of when card detection should not be carried out. With it in place enabling card detection before calling mmc_add_host() should be safe. Similarly, disabling it again after calling mmc_remove_host() will avoid any races. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sh-mmcif: add OF support, make platform data optionalGuennadi Liakhovetski
Add primitive OF support to the sh-mmcif driver, which also makes it necessary to be able to run without platform data. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sdhi: add OF support, make platform data optionalGuennadi Liakhovetski
Add primitive support for OF to the SDHI TMIO glue, which also makes it necessary to be able to run without platform data. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: tmio: use generic GPIO CD and WP handlersGuennadi Liakhovetski
The tmio-mmc driver is already using the generic GPIO CD handler in IRQ mode. This patch adds support for CD polling mode and also checks for availability of a WP GPIO. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sh_mobile_sdhi: support caps2 flagsGuennadi Liakhovetski
Let SDHI platforms specify mmc_host::caps2 flags in their platform data. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: tmio: support caps2 flagsGuennadi Liakhovetski
Allow tmio mmc glue drivers to pass mmc_host::caps2 flags down to the mmc layer. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: core: add WP pin handler to slot functionsGuennadi Liakhovetski
Card Write-Protect pin is often implemented, using a GPIO, which makes it simple to provide a generic handler for it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: core: convert slot functions to managed allocationGuennadi Liakhovetski
This prepares for the addition of further slot functions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: add CD GPIO polling support to slot functionsGuennadi Liakhovetski
A simple extension of mmc slot functions add support for CD GPIO polling for cases where the GPIO cannot produce interrupts, or where this is not desired for some reason. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: add two capability flags for CD and WP signal polarityGuennadi Liakhovetski
To handle CD and WP SD/MMC slot pins we need generic flags to specify their polarity. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: core: use a more generic name for slot function types and fieldsGuennadi Liakhovetski
struct mmc_host::hotplug is becoming a generic hook for slot functions. Rename it accordingly. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sh_mmcif: add regulator supportGuennadi Liakhovetski
Add regulator support to the sh_mmcif driver, but also preserve the current power-callback. Also note, that the card power is not switched off during clock gating periods, hence there's no need to power it on every time the card is re-activated. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sh_mmcif: remove redundant .down_pwr() callbackGuennadi Liakhovetski
From the original version of sh_mmcif the .set_pwr() callback has only been used to turn the card's power on, and the .down_pwr() callback has been used to turn it off. .set_pwr() can be used for both these tasks, which is also how it is implemented by the only user of this API: the SH7724 ecovec board. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sh_mmcif: re-read the clock frequency every time it is turned onGuennadi Liakhovetski
With aggressive clock gating the clock can be disabled during interface inactivity. During this time its frequency can be changed by another its user. Therefore when the interface is activated again and the clock is re-enabled, its frequency has to be re-read. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sh_mmcif: fix clock managementGuennadi Liakhovetski
Regardless of whether the MMC bus clock is the same as the PM clock on this specific interface, it has to be managed separately. Its proper management should also include enabling and disabling of the clock, whenever the interface is becoming active or going idle respectively. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sh_mmcif: simplify and use meaningful label names in error-handlingGuennadi Liakhovetski
A check for NULL platform data can be conveniently made in the very beginning of probing. Replace numbered error-handling labels in .probe() with meaningful names to make any future reorganisation simpler. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: tmio: remove a duplicated comment lineGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sdhi: do not install dummy callbacksGuennadi Liakhovetski
Currently the SDHI glue for the TMIO MMC driver installs dummy .get_cd() and .set_pwr() callbacks even if the platform didn't supply them. This is not necessary, since the TMIO MMC driver itself checks for NULL callbacks. This is also dubious if the platform provides a regulator for SD-card power switching. It is better to only install those callbacks, if they are really provided by the platform. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: tmio: add regulator supportGuennadi Liakhovetski
Currently the TMIO MMC driver derives the OCR mask from the platform data and uses a platform callback to turn card power on and off. This patch adds regulator support to the driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sdhi: implement tmio-mmc clock enable-update and disable callbacksGuennadi Liakhovetski
Instead of delivering one static clock frequency value, read from the hardware during probing, enable the tmio-mmc driver to re-read the frequency dynamically. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: tmio: add callbacks to enable-update and disable the interface clockGuennadi Liakhovetski
Every time the clock is enabled after possibly being disabled, we have to re-read its frequency and update our configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: tmio: don't needlessly enable interrupts during probingGuennadi Liakhovetski
We don't have to force-enable MMC interrupts in our .probe() method, mmc_add_host() will trigger card detection, that will enable all the necessary interrupts. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: dw_mmc: Fix null dma_ops access when use_dma is falseJonathan Kliegman
host->dma_ops is not valid if host->usa dma is 0 so protect host->dma_ops reference in dw_mci_resume Signed-off-by: Jonathan Kliegman <kliegs@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: add a function to get regulators, supplying card's powerGuennadi Liakhovetski
Add a function to get regulators, supplying card's Vdd and Vccq on a specific host. If a Vdd supplying regulator is found, the function checks, whether a valid OCR mask can be obtained from it. The Vccq regulator is optional. A failure to get it is not fatal. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: tmio: Don't access hardware registers after stopping clocksLaurent Pinchart
The tmio_mmc_set_ios() function configures the MMC power, clock and bus width. When the mmc core requests the driver to power off the card, we inform runtime PM, that the controller can be suspended. This can lead to the MSTP clock being turned off. Writing to any 16-bit hardware registers with the MSTP clock off leads to timeouts and errors being printed to the kernel log. This can occur both when stopping the MMC clock and when configuring the bus width. To fix this, stop the MMC clock before calling put_runtime_pm(), and skip bus width configuration when power is off. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sh_mmcif: Support MMC_SLEEP_AWAKE commandLaurent Pinchart
The MMC_SLEEP_AWAKE and SD_IO_SEND_OP_COND commands share the same opcode. SD_IO_SEND_OP_COND isn't supported by the SH MMCIF, but MMC_SLEEP_AWAKE is. Discriminate between the two commands using the command flags, and reject SD_IO_SEND_OP_COND only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: dw_mmc: Add check for IDMAC configurationGirish K S
In the current dwmmc driver there is support for selecting IDMAC from the menu config option. If the support for IDMAC is enabled in the menu config and the hardware configuration register's DMA_INTERFACE field is 0, the driver will still try to do the DMA initialization. The dw_mci_idmac_init function currently implemented returns only success indicating that the DMA initialization is always successful. This patch adds a check for existence of the DMA IP to allow the DMA initialization. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: sdhci-pxa: Add device tree supportChris Ball
Tested on an OLPC XO-1.75. (MMP2, sdhci-pxav3, CONFIG_MACH_MMP2_DT=y) Signed-off-by: Chris Ball <cjb@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-07-20forcedeth: spin_unlock_irq in interrupt handler fixDenis Efremov
The replacement of spin_lock_irq/spin_unlock_irq pair in interrupt handler by spin_lock_irqsave/spin_lock_irqrestore pair. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== A few bug fixes and small enhancements for net-next/3.6. ... Ansis Atteka (1): openvswitch: Do not send notification if ovs_vport_set_options() failed Ben Pfaff (1): openvswitch: Check gso_type for correct sk_buff in queue_gso_packets(). Jesse Gross (2): openvswitch: Enable retrieval of TCP flags from IPv6 traffic. openvswitch: Reset upper layer protocol info on internal devices. Leo Alterman (1): openvswitch: Fix typo in documentation. Pravin B Shelar (1): openvswitch: Check currect return value from skb_gso_segment() Raju Subramanian (1): openvswitch: Replace Nicira Networks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Fix neigh lookup keying over loopback/point-to-point devices.David S. Miller
We were using a special key "0" for all loopback and point-to-point device neigh lookups under ipv4, but we wouldn't use that special key for the neigh creation. So basically we'd make a new neigh at each and every lookup :-) This special case to use only one neigh for these device types is of dubious value, so just remove it entirely. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-21Merge branch 'lpc32xx/core2' of git://git.antcom.de/linux-2.6 into next/socArnd Bergmann
From Roland Stigge <stigge@antcom.de>: this LPC32xx core update (branch lpc32xx/core2) builds upon the previously provided lpc32xx/core-fixes. Basically including PWM support (for the PWM driver from Alexandre already in the pwm tree), and CPU ID. * 'lpc32xx/core2' of git://git.antcom.de/linux-2.6: ARM: LPC32xx: Add PWM support ARM: LPC32xx: Add PWM clock ARM: LPC32xx: Set system serial based on cpu unique id Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-21Merge branch 'lpc32xx/dts2' of git://git.antcom.de/linux-2.6 into next/dtArnd Bergmann
From Roland Stigge <stigge@antcom.de>: this is a late addition to LPC32xx DTS files for v3.6. * 'lpc32xx/dts2' of git://git.antcom.de/linux-2.6: ARM: LPC32xx: Add PWM to base dts file Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-20openvswitch: Fix typo in documentation.Leo Alterman
Signed-off-by: Leo Alterman <lalterman@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2012-07-20openvswitch: Check gso_type for correct sk_buff in queue_gso_packets().Ben Pfaff
At the point where it was used, skb_shinfo(skb)->gso_type referred to a post-GSO sk_buff. Thus, it would always be 0. We want to know the pre-GSO gso_type, so we need to obtain it before segmenting. Before this change, the kernel would pass inconsistent data to userspace: packets for UDP fragments with nonzero offset would be passed along with flow keys that indicate a zero offset (that is, the flow key for "later" fragments claimed to be "first" fragments). This inconsistency tended to confuse Open vSwitch userspace, causing it to log messages about "failed to flow_del" the flows with "later" fragments. Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2012-07-20openvswitch: Check currect return value from skb_gso_segment()Pravin B Shelar
Fix return check typo. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2012-07-20Documentation: Add newline at end-of-file to files lacking oneJesper Juhl
This patch simply adds a newline character at end-of-file to those files in Documentation/ that currently lack one. This is done for a few different reasons: A) It's rather annoying when you do "cat some_file.txt" that your prompt/cursor ends up at the end of the last line of output rather than on a new line. B) Some tools that process files line-by-line may get confused by the lack of a newline on the last line. C) The "\ No newline at end of file" line in diffs annoys me for some reason. So, let's just add the missing newline once and for all. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-20ipv4: Kill rt->fiDavid S. Miller
It's not really needed. We only grabbed a reference to the fib_info for the sake of fib_info local metrics. However, fib_info objects are freed using RCU, as are therefore their private metrics (if any). We would have triggered a route cache flush if we eliminated a reference to a fib_info object in the routing tables. Therefore, any existing cached routes will first check and see that they have been invalidated before an errant reference to these metric values would occur. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Turn rt->rt_route_iif into rt->rt_is_input.David S. Miller
That is this value's only use, as a boolean to indicate whether a route is an input route or not. So implement it that way, using a u16 gap present in the struct already. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Kill rt->rt_oifDavid S. Miller
Never actually used. It was being set on output routes to the original OIF specified in the flow key used for the lookup. Adjust the only user, ipmr_rt_fib_lookup(), for greater correctness of the flowi4_oif and flowi4_iif values, thanks to feedback from Julian Anastasov. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Dirty less cache lines in route caching paths.David S. Miller
Don't bother incrementing dst->__use and setting dst->lastuse, they are completely pointless and just slow things down. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Kill FLOWI_FLAG_RT_NOCACHE and associated code.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Cache input routes in fib_info nexthops.David S. Miller
Caching input routes is slightly simpler than output routes, since we don't need to be concerned with nexthop exceptions. (locally destined, and routed packets, never trigger PMTU events or redirects that will be processed by us). However, we have to elide caching for the DIRECTSRC and non-zero itag cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Cache output routes in fib_info nexthops.David S. Miller
If we have an output route that lacks nexthop exceptions, we can cache it in the FIB info nexthop. Such routes will have DST_HOST cleared because such routes refer to a family of destinations, rather than just one. The sequence of the handling of exceptions during route lookup is adjusted to make the logic work properly. Before we allocate the route, we lookup the exception. Then we know if we will cache this route or not, and therefore whether DST_HOST should be set on the allocated route. Then we use DST_HOST to key off whether we should store the resulting route, during rt_set_nexthop(), in the FIB nexthop cache. With help from Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Kill routes during PMTU/redirect updates.David S. Miller
Mark them obsolete so there will be a re-lookup to fetch the FIB nexthop exception info. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20net: Document dst->obsolete better.David S. Miller
Add a big comment explaining how the field works, and use defines instead of magic constants for the values assigned to it. Suggested by Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Adjust semantics of rt->rt_gateway.David S. Miller
In order to allow prefixed routes, we have to adjust how rt_gateway is set and interpreted. The new interpretation is: 1) rt_gateway == 0, destination is on-link, nexthop is iph->daddr 2) rt_gateway != 0, destination requires a nexthop gateway Abstract the fetching of the proper nexthop value using a new inline helper, rt_nexthop(), as suggested by Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com>
2012-07-20ipv4: Remove 'rt_dst' from 'struct rtable'David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 20:00:41 +0000