summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-09mm: shrinkers: fix deadlock in shrinker debugfsQi Zheng
The debugfs_remove_recursive() is invoked by unregister_shrinker(), which is holding the write lock of shrinker_rwsem. It will waits for the handler of debugfs file complete. The handler also needs to hold the read lock of shrinker_rwsem to do something. So it may cause the following deadlock: CPU0 CPU1 debugfs_file_get() shrinker_debugfs_count_show()/shrinker_debugfs_scan_write() unregister_shrinker() --> down_write(&shrinker_rwsem); debugfs_remove_recursive() // wait for (A) --> wait_for_completion(); // wait for (B) --> down_read_killable(&shrinker_rwsem) debugfs_file_put() -- (A) up_write() -- (B) The down_read_killable() can be killed, so that the above deadlock can be recovered. But it still requires an extra kill action, otherwise it will block all subsequent shrinker-related operations, so it's better to fix it. [akpm@linux-foundation.org: fix CONFIG_SHRINKER_DEBUG=n stub] Link: https://lkml.kernel.org/r/20230202105612.64641-1-zhengqi.arch@bytedance.com Fixes: 5035ebc644ae ("mm: shrinkers: introduce debugfs interface for memory shrinkers") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-09mm: hwpoison: support recovery from ksm_might_need_to_copy()Kefeng Wang
When the kernel copies a page from ksm_might_need_to_copy(), but runs into an uncorrectable error, it will crash since poisoned page is consumed by kernel, this is similar to the issue recently fixed by Copy-on-write poison recovery. When an error is detected during the page copy, return VM_FAULT_HWPOISON in do_swap_page(), and install a hwpoison entry in unuse_pte() when swapoff, which help us to avoid system crash. Note, memory failure on a KSM page will be skipped, but still call memory_failure_queue() to be consistent with general memory failure process, and we could support KSM page recovery in the feature. [wangkefeng.wang@huawei.com: enhance unuse_pte(), fix issue found by lkp] Link: https://lkml.kernel.org/r/20221213120523.141588-1-wangkefeng.wang@huawei.com [wangkefeng.wang@huawei.com: update changelog, alter ksm_might_need_to_copy(), restore unlikely() in unuse_pte()] Link: https://lkml.kernel.org/r/20230201074433.96641-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20221209072801.193221-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-09kasan: fix Oops due to missing calls to kasan_arch_is_ready()Christophe Leroy
On powerpc64, you can build a kernel with KASAN as soon as you build it with RADIX MMU support. However if the CPU doesn't have RADIX MMU, KASAN isn't enabled at init and the following Oops is encountered. [ 0.000000][ T0] KASAN not enabled as it requires radix! [ 4.484295][ T26] BUG: Unable to handle kernel data access at 0xc00e000000804a04 [ 4.485270][ T26] Faulting instruction address: 0xc00000000062ec6c [ 4.485748][ T26] Oops: Kernel access of bad area, sig: 11 [#1] [ 4.485920][ T26] BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries [ 4.486259][ T26] Modules linked in: [ 4.486637][ T26] CPU: 0 PID: 26 Comm: kworker/u2:2 Not tainted 6.2.0-rc3-02590-gf8a023b0a805 #249 [ 4.486907][ T26] Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,HEAD pSeries [ 4.487445][ T26] Workqueue: eval_map_wq .tracer_init_tracefs_work_func [ 4.488744][ T26] NIP: c00000000062ec6c LR: c00000000062bb84 CTR: c0000000002ebcd0 [ 4.488867][ T26] REGS: c0000000049175c0 TRAP: 0380 Not tainted (6.2.0-rc3-02590-gf8a023b0a805) [ 4.489028][ T26] MSR: 8000000002009032 <SF,VEC,EE,ME,IR,DR,RI> CR: 44002808 XER: 00000000 [ 4.489584][ T26] CFAR: c00000000062bb80 IRQMASK: 0 [ 4.489584][ T26] GPR00: c0000000005624d4 c000000004917860 c000000001cfc000 1800000000804a04 [ 4.489584][ T26] GPR04: c0000000003a2650 0000000000000cc0 c00000000000d3d8 c00000000000d3d8 [ 4.489584][ T26] GPR08: c0000000049175b0 a80e000000000000 0000000000000000 0000000017d78400 [ 4.489584][ T26] GPR12: 0000000044002204 c000000003790000 c00000000435003c c0000000043f1c40 [ 4.489584][ T26] GPR16: c0000000043f1c68 c0000000043501a0 c000000002106138 c0000000043f1c08 [ 4.489584][ T26] GPR20: c0000000043f1c10 c0000000043f1c20 c000000004146c40 c000000002fdb7f8 [ 4.489584][ T26] GPR24: c000000002fdb834 c000000003685e00 c000000004025030 c000000003522e90 [ 4.489584][ T26] GPR28: 0000000000000cc0 c0000000003a2650 c000000004025020 c000000004025020 [ 4.491201][ T26] NIP [c00000000062ec6c] .kasan_byte_accessible+0xc/0x20 [ 4.491430][ T26] LR [c00000000062bb84] .__kasan_check_byte+0x24/0x90 [ 4.491767][ T26] Call Trace: [ 4.491941][ T26] [c000000004917860] [c00000000062ae70] .__kasan_kmalloc+0xc0/0x110 (unreliable) [ 4.492270][ T26] [c0000000049178f0] [c0000000005624d4] .krealloc+0x54/0x1c0 [ 4.492453][ T26] [c000000004917990] [c0000000003a2650] .create_trace_option_files+0x280/0x530 [ 4.492613][ T26] [c000000004917a90] [c000000002050d90] .tracer_init_tracefs_work_func+0x274/0x2c0 [ 4.492771][ T26] [c000000004917b40] [c0000000001f9948] .process_one_work+0x578/0x9f0 [ 4.492927][ T26] [c000000004917c30] [c0000000001f9ebc] .worker_thread+0xfc/0x950 [ 4.493084][ T26] [c000000004917d60] [c00000000020be84] .kthread+0x1a4/0x1b0 [ 4.493232][ T26] [c000000004917e10] [c00000000000d3d8] .ret_from_kernel_thread+0x58/0x60 [ 4.495642][ T26] Code: 60000000 7cc802a6 38a00000 4bfffc78 60000000 7cc802a6 38a00001 4bfffc68 60000000 3d20a80e 7863e8c2 792907c6 <7c6348ae> 20630007 78630fe0 68630001 [ 4.496704][ T26] ---[ end trace 0000000000000000 ]--- The Oops is due to kasan_byte_accessible() not checking the readiness of KASAN. Add missing call to kasan_arch_is_ready() and bail out when not ready. The same problem is observed with ____kasan_kfree_large() so fix it the same. Also, as KASAN is not available and no shadow area is allocated for linear memory mapping, there is no point in allocating shadow mem for vmalloc memory as shown below in /sys/kernel/debug/kernel_page_tables ---[ kasan shadow mem start ]--- 0xc00f000000000000-0xc00f00000006ffff 0x00000000040f0000 448K r w pte valid present dirty accessed 0xc00f000000860000-0xc00f00000086ffff 0x000000000ac10000 64K r w pte valid present dirty accessed 0xc00f3ffffffe0000-0xc00f3fffffffffff 0x0000000004d10000 128K r w pte valid present dirty accessed ---[ kasan shadow mem end ]--- So, also verify KASAN readiness before allocating and poisoning shadow mem for VMAs. Link: https://lkml.kernel.org/r/150768c55722311699fdcf8f5379e8256749f47d.1674716617.git.christophe.leroy@csgroup.eu Fixes: 41b7a347bf14 ("powerpc: Book3S 64-bit outline-only KASAN support") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reported-by: Nathan Lynch <nathanl@linux.ibm.com> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: <stable@vger.kernel.org> [5.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-10Merge tag 'amd-drm-fixes-6.2-2023-02-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.2-2023-02-09: amdgpu: - Add a parameter to disable S/G display - Re-enable S/G display on all DCNs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209174504.7577-1-alexander.deucher@amd.com
2023-02-10Merge tag 'drm-intel-fixes-2023-02-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Display watermark fix (Ville) - fbdev fix for PSR, FBC, DRRS (Jouni) - Move fd_install after last use of fence (Rob) - Initialize the obj flags for shmem objects (Aravind) - Fix VBT DSI DVO port handling (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y+UZ0rh2YlhTrE4t@intel.com
2023-02-10Merge tag 'drm-misc-fixes-2023-02-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A fix for a circular refcounting in drm/client, one for a memory leak in amdgpu and a virtio fence fix when interrupted Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230209083600.7hi6roht6xxgldgz@houat
2023-02-09cpuidle: sysfs: make kobj_type structures constantThomas Weißschuh
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpuidle: add ARCH_SUSPEND_POSSIBLE dependenciesArnd Bergmann
Some ARMv4 processors don't support suspend, which leads to a build failure with the tegra and qualcomm cpuidle driver: WARNING: unmet direct dependencies detected for ARM_CPU_SUSPEND Depends on [n]: ARCH_SUSPEND_POSSIBLE [=n] Selected by [y]: - ARM_TEGRA_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_TEGRA [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y] arch/arm/kernel/sleep.o: in function `__cpu_suspend': (.text+0x68): undefined reference to `cpu_sa110_suspend_size' (.text+0x68): undefined reference to `cpu_fa526_suspend_size' Add an explicit dependency to make randconfig builds avoid this combination. Fixes: faae6c9f2e68 ("cpuidle: tegra: Enable compile testing") Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver") Link: https://lore.kernel.org/all/20211013160125.772873-1-arnd@kernel.org/ Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09riscv: Fixup race condition on PG_dcache_clean in flush_icache_pteGuo Ren
In commit 588a513d3425 ("arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()"), we found RISC-V has the same issue as the previous arm64. The previous implementation didn't guarantee the correct sequence of operations, which means flush_icache_all() hasn't been called when the PG_dcache_clean was set. That would cause a risk of page synchronization. Fixes: 08f051eda33b ("RISC-V: Flush I$ when making a dirty page executable") Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230127035306.1819561-1-guoren@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-09PM: EM: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09riscv: kprobe: Fixup misaligned load textGuo Ren
The current kprobe would cause a misaligned load for the probe point. This patch fixup it with two half-word loads instead. Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/linux-riscv/878rhig9zj.fsf@all.your.base.are.belong.to.us/ Reported-by: Bjorn Topel <bjorn.topel@gmail.com> Reviewed-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/r/20230204063531.740220-1-guoren@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-09PM: domains: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: Make kobj_type structure constantThomas Weißschuh
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definition to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: davinci: Fix clk use after freeUwe Kleine-König
The remove function first frees the clks and only then calls cpufreq_unregister_driver(). If one of the cpufreq callbacks is called just before cpufreq_unregister_driver() is run, the freed clks might be used. Fixes: 6601b8030de3 ("davinci: add generic CPUFreq driver for DaVinci") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: amd-pstate: avoid uninitialized variable useArnd Bergmann
The new epp support causes warnings about three separate but related bugs: 1) failing before allocation should just return an error: drivers/cpufreq/amd-pstate.c:951:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (!dev) ^~~~ drivers/cpufreq/amd-pstate.c:1018:9: note: uninitialized use occurs here return ret; ^~~ 2) wrong variable to store return code: drivers/cpufreq/amd-pstate.c:963:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (rc) ^~ drivers/cpufreq/amd-pstate.c:1019:9: note: uninitialized use occurs here return ret; ^~~ drivers/cpufreq/amd-pstate.c:963:2: note: remove the 'if' if its condition is always false if (rc) ^~~~~~~ 3) calling amd_pstate_set_epp() in cleanup path after determining that it should not be called: drivers/cpufreq/amd-pstate.c:1055:6: error: variable 'epp' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (cpudata->epp_policy == cpudata->policy) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/cpufreq/amd-pstate.c:1080:30: note: uninitialized use occurs here amd_pstate_set_epp(cpudata, epp); ^~~ All three are trivial to fix, but most likely there are additional bugs in this function when the error handling was not really tested. Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Wyes Karny <wyes.karny@amd.com> Reviewed-by: Yuan Perry <Perry.Yuan@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: Make cpufreq_unregister_driver() return voidUwe Kleine-König
All but a few drivers ignore the return value of cpufreq_unregister_driver(). Those few that don't only call it after cpufreq_register_driver() succeeded, in which case the call doesn't fail. Make the function return no value and add a WARN_ON for the case that the function is called in an invalid situation (i.e. without a previous successful call to cpufreq_register_driver()). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> # brcmstb-avs-cpufreq.c Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09time/debug: Fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230202151214.2306822-1-gregkh@linuxfoundation.org
2023-02-09Merge tag 'pm-6.2-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix the incorrect value returned by cpufreq driver's ->get() callback for Qualcomm platforms (Douglas Anderson)" * tag 'pm-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
2023-02-09Merge back cpufreq material for 6.3-rc1.Rafael J. Wysocki
2023-02-09Merge tag 'net-6.2-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and ipsec subtrees. Current release - regressions: - sched: fix off by one in htb_activate_prios() - eth: mana: fix accessing freed irq affinity_hint - eth: ice: fix out-of-bounds KASAN warning in virtchnl Current release - new code bugs: - eth: mtk_eth_soc: enable special tag when any MAC uses DSA Previous releases - always broken: - core: fix sk->sk_txrehash default - neigh: make sure used and confirmed times are valid - mptcp: be careful on subflow status propagation on errors - xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr() - phylink: move phy_device_free() to correctly release phy device - eth: mlx5: - fix crash unsetting rx-vlan-filter in switchdev mode - fix hang on firmware reset - serialize module cleanup with reload and remove" * tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) selftests: forwarding: lib: quote the sysctl values net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used rds: rds_rm_zerocopy_callback() use list_first_entry() net: txgbe: Update support email address selftests: Fix failing VXLAN VNI filtering test selftests: mptcp: stop tests earlier selftests: mptcp: allow more slack for slow test-case mptcp: be careful on subflow status propagation on errors mptcp: fix locking for in-kernel listener creation mptcp: fix locking for setsockopt corner-case mptcp: do not wait for bare sockets' timeout net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0 nfp: ethtool: fix the bug of setting unsupported port speed txhash: fix sk->sk_txrehash default net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg() net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA net: sched: sch: Fix off by one in htb_activate_prios() igc: Add ndo_tx_timeout support net: mana: Fix accessing freed irq affinity_hint hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC ...
2023-02-09Merge tag 'for-linus-2023020901' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - fix potential infinite loop with a badly crafted HID device (Xin Zhao) - fix regression from 6.1 in USB logitech devices potentially making their mouse wheel not working (Bastien Nocera) - clean up in AMD sensors, which fixes a long time resume bug (Mario Limonciello) - few device small fixes and quirks * tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Ignore battery for ELAN touchscreen 29DF on HP HID: amd_sfh: if no sensors are enabled, clean up HID: logitech: Disable hi-res scrolling on USB HID: core: Fix deadloop in hid_apply_multiplier. HID: Ignore battery for Elan touchscreen on Asus TP420IA HID: elecom: add support for TrackBall 056E:011C
2023-02-09Merge tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifx fix from Steve French: "Small fix for use after free" * tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix use-after-free in rdata->read_into_pages()
2023-02-09block: make kobj_type structures constantThomas Weißschuh
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230208-kobj_type-block-v1-1-0b3eafd7d983@weissschuh.net Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-09btrfs: free device in btrfs_close_devices for a single device filesystemAnand Jain
We have this check to make sure we don't accidentally add older devices that may have disappeared and re-appeared with an older generation from being added to an fs_devices (such as a replace source device). This makes sense, we don't want stale disks in our file system. However for single disks this doesn't really make sense. I've seen this in testing, but I was provided a reproducer from a project that builds btrfs images on loopback devices. The loopback device gets cached with the new generation, and then if it is re-used to generate a new file system we'll fail to mount it because the new fs is "older" than what we have in cache. Fix this by freeing the cache when closing the device for a single device filesystem. This will ensure that the mount command passed device path is scanned successfully during the next mount. CC: stable@vger.kernel.org # 5.10+ Reported-by: Daan De Meyer <daandemeyer@fb.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-02-09btrfs: lock the inode in shared mode before starting fiemapFilipe Manana
Currently fiemap does not take the inode's lock (VFS lock), it only locks a file range in the inode's io tree. This however can lead to a deadlock if we have a concurrent fsync on the file and fiemap code triggers a fault when accessing the user space buffer with fiemap_fill_next_extent(). The deadlock happens on the inode's i_mmap_lock semaphore, which is taken both by fsync and btrfs_page_mkwrite(). This deadlock was recently reported by syzbot and triggers a trace like the following: task:syz-executor361 state:D stack:20264 pid:5668 ppid:5119 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6606 schedule+0xcb/0x190 kernel/sched/core.c:6682 wait_on_state fs/btrfs/extent-io-tree.c:707 [inline] wait_extent_bit+0x577/0x6f0 fs/btrfs/extent-io-tree.c:751 lock_extent+0x1c2/0x280 fs/btrfs/extent-io-tree.c:1742 find_lock_delalloc_range+0x4e6/0x9c0 fs/btrfs/extent_io.c:488 writepage_delalloc+0x1ef/0x540 fs/btrfs/extent_io.c:1863 __extent_writepage+0x736/0x14e0 fs/btrfs/extent_io.c:2174 extent_write_cache_pages+0x983/0x1220 fs/btrfs/extent_io.c:3091 extent_writepages+0x219/0x540 fs/btrfs/extent_io.c:3211 do_writepages+0x3c3/0x680 mm/page-writeback.c:2581 filemap_fdatawrite_wbc+0x11e/0x170 mm/filemap.c:388 __filemap_fdatawrite_range mm/filemap.c:421 [inline] filemap_fdatawrite_range+0x175/0x200 mm/filemap.c:439 btrfs_fdatawrite_range fs/btrfs/file.c:3850 [inline] start_ordered_ops fs/btrfs/file.c:1737 [inline] btrfs_sync_file+0x4ff/0x1190 fs/btrfs/file.c:1839 generic_write_sync include/linux/fs.h:2885 [inline] btrfs_do_write_iter+0xcd3/0x1280 fs/btrfs/file.c:1684 call_write_iter include/linux/fs.h:2189 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f7d4054e9b9 RSP: 002b:00007f7d404fa2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f7d405d87a0 RCX: 00007f7d4054e9b9 RDX: 0000000000000090 RSI: 0000000020000000 RDI: 0000000000000006 RBP: 00007f7d405a51d0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 61635f65646f6e69 R13: 65646f7475616f6e R14: 7261637369646f6e R15: 00007f7d405d87a8 </TASK> INFO: task syz-executor361:5697 blocked for more than 145 seconds. Not tainted 6.2.0-rc3-syzkaller-00376-g7c6984405241 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor361 state:D stack:21216 pid:5697 ppid:5119 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6606 schedule+0xcb/0x190 kernel/sched/core.c:6682 rwsem_down_read_slowpath+0x5f9/0x930 kernel/locking/rwsem.c:1095 __down_read_common+0x54/0x2a0 kernel/locking/rwsem.c:1260 btrfs_page_mkwrite+0x417/0xc80 fs/btrfs/inode.c:8526 do_page_mkwrite+0x19e/0x5e0 mm/memory.c:2947 wp_page_shared+0x15e/0x380 mm/memory.c:3295 handle_pte_fault mm/memory.c:4949 [inline] __handle_mm_fault mm/memory.c:5073 [inline] handle_mm_fault+0x1b79/0x26b0 mm/memory.c:5219 do_user_addr_fault+0x69b/0xcb0 arch/x86/mm/fault.c:1428 handle_page_fault arch/x86/mm/fault.c:1519 [inline] exc_page_fault+0x7a/0x110 arch/x86/mm/fault.c:1575 asm_exc_page_fault+0x22/0x30 arch/x86/include/asm/idtentry.h:570 RIP: 0010:copy_user_short_string+0xd/0x40 arch/x86/lib/copy_user_64.S:233 Code: 74 0a 89 (...) RSP: 0018:ffffc9000570f330 EFLAGS: 00050202 RAX: ffffffff843e6601 RBX: 00007fffffffefc8 RCX: 0000000000000007 RDX: 0000000000000000 RSI: ffffc9000570f3e0 RDI: 0000000020000120 RBP: ffffc9000570f490 R08: 0000000000000000 R09: fffff52000ae1e83 R10: fffff52000ae1e83 R11: 1ffff92000ae1e7c R12: 0000000000000038 R13: ffffc9000570f3e0 R14: 0000000020000120 R15: ffffc9000570f3e0 copy_user_generic arch/x86/include/asm/uaccess_64.h:37 [inline] raw_copy_to_user arch/x86/include/asm/uaccess_64.h:58 [inline] _copy_to_user+0xe9/0x130 lib/usercopy.c:34 copy_to_user include/linux/uaccess.h:169 [inline] fiemap_fill_next_extent+0x22e/0x410 fs/ioctl.c:144 emit_fiemap_extent+0x22d/0x3c0 fs/btrfs/extent_io.c:3458 fiemap_process_hole+0xa00/0xad0 fs/btrfs/extent_io.c:3716 extent_fiemap+0xe27/0x2100 fs/btrfs/extent_io.c:3922 btrfs_fiemap+0x172/0x1e0 fs/btrfs/inode.c:8209 ioctl_fiemap fs/ioctl.c:219 [inline] do_vfs_ioctl+0x185b/0x2980 fs/ioctl.c:810 __do_sys_ioctl fs/ioctl.c:868 [inline] __se_sys_ioctl+0x83/0x170 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f7d4054e9b9 RSP: 002b:00007f7d390d92f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f7d405d87b0 RCX: 00007f7d4054e9b9 RDX: 0000000020000100 RSI: 00000000c020660b RDI: 0000000000000005 RBP: 00007f7d405a51d0 R08: 00007f7d390d9700 R09: 0000000000000000 R10: 00007f7d390d9700 R11: 0000000000000246 R12: 61635f65646f6e69 R13: 65646f7475616f6e R14: 7261637369646f6e R15: 00007f7d405d87b8 </TASK> What happens is the following: 1) Task A is doing an fsync, enters btrfs_sync_file() and flushes delalloc before locking the inode and the i_mmap_lock semaphore, that is, before calling btrfs_inode_lock(); 2) After task A flushes delalloc and before it calls btrfs_inode_lock(), another task dirties a page; 3) Task B starts a fiemap without FIEMAP_FLAG_SYNC, so the page dirtied at step 2 remains dirty and unflushed. Then when it enters extent_fiemap() and it locks a file range that includes the range of the page dirtied in step 2; 4) Task A calls btrfs_inode_lock() and locks the inode (VFS lock) and the inode's i_mmap_lock semaphore in write mode. Then it tries to flush delalloc by calling start_ordered_ops(), which will block, at find_lock_delalloc_range(), when trying to lock the range of the page dirtied at step 2, since this range was locked by the fiemap task (at step 3); 5) Task B generates a page fault when accessing the user space fiemap buffer with a call to fiemap_fill_next_extent(). The fault handler needs to call btrfs_page_mkwrite() for some other page of our inode, and there we deadlock when trying to lock the inode's i_mmap_lock semaphore in read mode, since the fsync task locked it in write mode (step 4) and the fsync task can not progress because it's waiting to lock a file range that is currently locked by us (the fiemap task, step 3). Fix this by taking the inode's lock (VFS lock) in shared mode when entering fiemap. This effectively serializes fiemap with fsync (except the most expensive part of fsync, the log sync), preventing this deadlock. Reported-by: syzbot+cc35f55c41e34c30dcb5@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/00000000000032dc7305f2a66f46@google.com/ CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-02-09Revert "drm/amd/display: disable S/G display on DCN 3.1.5"Alex Deucher
This reverts commit 3cc67fe1b3aa1ac4720e002f2aa2d08c9199a584. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09Revert "drm/amd/display: disable S/G display on DCN 2.1.0"Alex Deucher
This reverts commit 2404f9b0ea0153c3fddb0c4d7a43869dc8608f6f. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09Revert "drm/amd/display: disable S/G display on DCN 3.1.2/3"Alex Deucher
This reverts commit f081cd4ca2658752a8c0e2353d50aec80d07c65f. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09drm/amdgpu: add S/G display parameterAlex Deucher
Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). Add a option to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. v2: fix typo Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09Merge tag 'nvme-6.2-2023-02-09' of git://git.infradead.org/nvme into block-6.2Jens Axboe
Pull NVMe fix from Christoph: "nvme fixes for Linux 6.2 - fix a static checker warning for a variable introduces in the last pull request (Tom Rix)" * tag 'nvme-6.2-2023-02-09' of git://git.infradead.org/nvme: nvme-auth: mark nvme_auth_wq static
2023-02-09block: Merge bio before checking ->cached_rqXiao Ni
It checks if plug->cached_rq is empty before merging bio. But the merge action doesn't have relationship with plug->cached_rq, it trys to merge bio with requests within plug->mq_list. Now it checks if ->cached_rq is empty before merging bio. If it's empty, it will miss the merge chances. So move the merge function before checking ->cached_rq. Signed-off-by: Xiao Ni <xni@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230209031930.27354-1-xni@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-09Revert "blk-cgroup: simplify blkg freeing from initialization failure paths"Christoph Hellwig
It turns out this was too soon. blkg_conf_prep does to funky locking games with the queue lock for this to work properly. This reverts commit 27b642b07a4a5eb44dffa94a5171ce468bdc46f9. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230209053523.437927-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-09blk-cgroup: delay calling blkcg_exit_disk until disk_releaseChristoph Hellwig
While del_gendisk ensures there is no outstanding I/O on the queue, it can't prevent block layer users from building new I/O. This leads to a NULL ->root_blkg reference in bio_associate_blkg when allocating a new bio on a shut down file system. Delay freeing the blk-cgroup subsystems from del_gendisk until disk_release to make sure the blkg and throttle information is still avaіlable for bio submitters, even if those bios will immediately fail. This now can cause a case where disk_release is called on a disk that hasn't been added. That's mostly harmless, except for a case in blk_throttl_exit that now needs to check for a NULL ->td pointer. Fixes: 178fa7d49815 ("blk-cgroup: delay blk-cgroup initialization until add_disk") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230208063514.171485-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-09EDAC/amd64: Remove early_channel_count()Yazen Ghannam
The early_channel_count() function seems to have been useful in the past for knowing how many EDAC mci structures to populate. However, this is no longer needed as the maximum channel count for a system is used instead. Remove the early_channel_count() helper functions and related code. Use the size of the channel layer when iterating over channel structures. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230127170419.1824692-6-yazen.ghannam@amd.com
2023-02-09EDAC/amd64: Remove PCI Function 0Yazen Ghannam
PCI Function 0 is used on Family 17h and later only to read the "dhar" value. This value is printed and provided through a module-specific debug sysfs file. The value is not used for any Family 17h and later code, and it does not have any apparent debug value on these systems. Remove "dhar", Function 0 PCI IDs, and all related code. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230127170419.1824692-5-yazen.ghannam@amd.com
2023-02-09Merge tag 'at91-dt-6.3-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 device tree updates for 6.3 #2 It contains: - cleanups arround flexcom nodes on SAM9X60 SoC as follows: - preserve same ID for flexcoms and the embedded nodes (e.g. flx4 will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3); - SoC specific bindings were moved from board specific file to SoC specific file - DMA bindings for all flexcom nodes were added - SoC file was filled with missing flexcom nodes - new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface, 1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power regulators, UART and JTAG connectors * tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board dt-bindings: arm: at91: Add info on sam9x60 curiosity ARM: dts: at91: sam9x60: Add missing flexcom definitions ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sam9x60: fix spi4 node ARM: dts: at91: sam9x60: move flexcom definitions ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09arm64: dts: uniphier: Fix property name in PXs3 USB nodeKunihiko Hayashi
The property "snps,usb2_gadget_lpm_disable" is wrong. It should be fixed to "snps,usb2-gadget-lpm-disable". Cc: stable@vger.kernel.org Fixes: 19fee1a1096d ("arm64: dts: uniphier: Add USB-device support for PXs3 reference board") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230207021429.28925-1-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09arm64: dts: uniphier: Add syscon-uhs-mode to SD nodeKunihiko Hayashi
Add sociopnext,syscon-uhs-mode prpperty to the SD node to refer the handle of the control logic node. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230207023514.29783-9-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09arm64: dts: uniphier: Add syscon compatible string to soc-glue-debugKunihiko Hayashi
Add "syscon" compatible string to the nodes for soc-glue-debug according to the DT schema. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230207023514.29783-8-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09arm64: dts: uniphier: Add missing reg properties for glue layer nodesKunihiko Hayashi
The nodes for some glue layers don't include necessary reg properties. Add the properties according to the DT schema. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230207023514.29783-7-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09arm64: dts: uniphier: Align node names for SoC-dependent controller and PHYs ↵Kunihiko Hayashi
with bindings The node names for SoC-dependent controllers and PHYs should be generic ones according to the DT schemas. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230207023514.29783-6-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09ARM: dts: uniphier: Add syscon-uhs-mode to SD nodeKunihiko Hayashi
Add sociopnext,syscon-uhs-mode prpperty to the SD node to refer the handle of the control logic node. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230207023514.29783-5-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09ARM: dts: uniphier: Add syscon compatible string to soc-glue-debugKunihiko Hayashi
Add "syscon" compatible string to the nodes for soc-glue-debug according to the DT schema. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230207023514.29783-4-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09ARM: dts: uniphier: Add missing reg properties for glue layerKunihiko Hayashi
The nodes for glue layers should include "reg" property. Add the property according to the DT schema. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230207023514.29783-3-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09ARM: dts: uniphier: Align node names for SoC-dependent controller and PHYs ↵Kunihiko Hayashi
with bindings The node names for SoC-dependent controllers and PHYs should be generic ones according to the DT schemas. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230207023514.29783-2-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09Merge tag 'aspeed-6.3-devicetree' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 6.3 - New machines * Ufispace NCPLite AST2600 BMC * Facebook Greatlakes AST2600 BMC - Updates for ethanolx, bletchley and tyan s8036 * tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: p10bmc: Enable UART2 ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC dt-bindings: arm: aspeed: document Ufispace NCPLite BMC dt-bindings: vendor-prefixes: Add prefix for Ufi Space arm: dts: aspeed: tyan s8036: Enable kcs interrupts ARM: dts: aspeed: bletchley: Enable wdtrst1 ARM: dts: aspeed: bletchley: Rename flash1 label ARM: dts: aspeed: ethanolx: Add BIOS flash chip ARM: dts: aspeed: ethanolx: Enable CTS/RTS pins on UART1 ARM: dts: aspeed: ethanolx: Add label for the master partition ARM: dts: aspeed: ethanolx: Correct EEPROM device name ARM: dts: aspeed: ethanolx: Enable VUART ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC dt-bindings: arm: aspeed: add Facebook Greatlakes board Link: https://lore.kernel.org/r/CACPK8XdbffU5yRSZF-zR2xv-+6aJK+hEXP8TOkW=SvS+nNTGxg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09usb: core: add quirk for Alcor Link AK9563 smartcard readerMark Pearson
The Alcor Link AK9563 smartcard reader used on some Lenovo platforms doesn't work. If LPM is enabled the reader will provide an invalid usb config descriptor. Added quirk to disable LPM. Verified fix on Lenovo P16 G1 and T14 G3 Tested-by: Miroslav Zatko <mzatko@mirexoft.com> Tested-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: stable@vger.kernel.org Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230208181223.1092654-1-mpearson-lenovo@squebb.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09usb: typec: altmodes/displayport: Fix probe pin assign checkPrashant Malani
While checking Pin Assignments of the port and partner during probe, we don't take into account whether the peripheral is a plug or receptacle. This manifests itself in a mode entry failure on certain docks and dongles with captive cables. For instance, the Startech.com Type-C to DP dongle (Model #CDP2DP) advertises its DP VDO as 0x405. This would fail the Pin Assignment compatibility check, despite it supporting Pin Assignment C as a UFP. Update the check to use the correct DP Pin Assign macros that take the peripheral's receptacle bit into account. Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Reported-by: Diana Zigterman <dzigterman@chromium.org> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20230208205318.131385-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09Revert "usb: gadget: u_ether: Do not make UDC parent of the net device"Paul Cercueil
This reverts commit 321b59870f850a10dbb211ecd2bd87b41497ea6f. This commit broke USB networking on Ingenic SoCs and maybe elsewhere. The actual reason is unknown; and while a proper fix would be better, we're sitting at -rc7 now, so a revert is justified - and we can work on re-introducing this change for 6.3. Fixes: 321b59870f85 ("usb: gadget: u_ether: Do not make UDC parent of the net device") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20230209105626.10597-1-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09ARM: dts: exynos: correct max98090 DAI argument in SnowKrzysztof Kozlowski
The max98090 has only one DAI and does not take argument to DAI phandles: exynos5250-snow-rev5.dtb: audio-codec@10: #sound-dai-cells:0:0: 0 was expected Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20230208160424.371678-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-13 10:48:58 +0000