summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-05Linux 6.2-rc7v6.2-rc7Linus Torvalds
2023-02-05Merge tag 'usb-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes that resolve some reported problems. These include: - gadget driver fixes - dwc3 driver fix - typec driver fix - MAINTAINERS file update. All of these have been in linux-next with no reported problems" * tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Don't attempt to resume the ports before they exist usb: gadget: udc: do not clear gadget driver.bus usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait usb: dwc3: qcom: enable vbus override when in OTG dr-mode MAINTAINERS: Add myself as UVC Gadget Maintainer
2023-02-05Merge tag 'tty-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small serial and vt fixes. These include: - 8250 driver fixes relating to dma issues - stm32 serial driver fix for threaded irqs - vc_screen bugfix for reported problems. All have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF serial: 8250_dma: Fix DMA Rx rearm race serial: 8250_dma: Fix DMA Rx completion race serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
2023-02-05Merge tag 'char-misc-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a number of small char/misc/whatever driver fixes. They include: - IIO driver fixes for some reported problems - nvmem driver fixes - fpga driver fixes - debugfs memory leak fix in the hv_balloon and irqdomain code (irqdomain change was acked by the maintainer) All have been in linux-next with no reported problems" * tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits) kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup() HV: hv_balloon: fix memory leak with using debugfs_lookup() nvmem: qcom-spmi-sdam: fix module autoloading nvmem: core: fix return value nvmem: core: fix cell removal on error nvmem: core: fix device node refcounting nvmem: core: fix registration vs use race nvmem: core: fix cleanup after dev_set_name() nvmem: core: remove nvmem_config wp_gpio nvmem: core: initialise nvmem->id early nvmem: sunxi_sid: Always use 32-bit MMIO reads nvmem: brcm_nvram: Add check for kzalloc iio: imu: fxos8700: fix MAGN sensor scale and unit iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN iio: imu: fxos8700: fix failed initialization ODR mode assignment iio: imu: fxos8700: fix incorrect ODR mode readback iio: light: cm32181: Fix PM support on system with 2 I2C resources iio: hid: fix the retval in gyro_3d_capture_sample iio: hid: fix the retval in accel_3d_capture_sample iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m ...
2023-02-05Merge tag 'fbdev-for-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: - fix fbcon to prevent fonts bigger than 32x32 pixels to avoid overflows reported by syzbot - switch omapfb to use kstrtobool() - switch some fbdev drivers to use the backlight helpers * tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbcon: Check font dimension limits fbdev: omapfb: Use kstrtobool() instead of strtobool() fbdev: fbmon: fix function name in kernel-doc fbdev: atmel_lcdfb: Rework backlight status updates fbdev: riva: Use backlight helper fbdev: omapfb: panel-dsi-cm: Use backlight helper fbdev: nvidia: Use backlight helper fbdev: mx3fb: Use backlight helper fbdev: radeon: Use backlight helper fbdev: atyfb: Use backlight helper fbdev: aty128fb: Use backlight helper
2023-02-05Merge tag 'x86_urgent_for_v6.2_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Prevent the compiler from reordering accesses to debug regs which could cause a #VC exception in SEV-ES guests at the wrong place in the NMI handling path * tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses
2023-02-05Merge tag 'perf_urgent_for_v6.2_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Borislav Petkov: - Lock the proper critical section when dealing with perf event context * tag 'perf_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_pmu_context serialization
2023-02-05irqchip/ls-scfg-msi: Simplify Kconfig dependenciesLukas Bulwahn
Having both PCI_MSI and PCI is redundant. Drop PCI. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> [maz: cut commit message extra verbosity] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230111100554.24500-1-lukas.bulwahn@gmail.com
2023-02-05irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probeMiaoqian Lin
of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. Fixes: cd844b0715ce ("irqchip/ti-sci-intr: Add support for Interrupt Router driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230102085611.3955984-1-linmq006@gmail.com
2023-02-05irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probeMiaoqian Lin
of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. Fixes: a68a63cb4dfc ("irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230102084208.3951758-1-linmq006@gmail.com
2023-02-05irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domainsMiaoqian Lin
of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. Fixes: e6b78f2c3e14 ("irqchip: Add the Alpine MSIX interrupt controller") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230102082811.3947760-1-linmq006@gmail.com
2023-02-05irqchip: Fix refcount leak in platform_irqchip_probeMiaoqian Lin
of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. Fixes: f8410e626569 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230102121318.3990586-1-linmq006@gmail.com
2023-02-05irqchip/apple-aic: Move over to core ipi-muxMarc Zyngier
Now that the complexity of the AIC IPI mux has been copied into the core code for the benefit of the riscv architecture, shrink the AIC driver by the same amount by using that infrastructure. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Acked-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20230103141221.772261-10-apatel@ventanamicro.com
2023-02-05genirq: Add mechanism to multiplex a single HW IPIAnup Patel
All RISC-V platforms have a single HW IPI provided by the INTC local interrupt controller. The HW method to trigger INTC IPI can be through external irqchip (e.g. RISC-V AIA), through platform specific device (e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call). To support multiple IPIs on RISC-V, add a generic IPI multiplexing mechanism which help us create multiple virtual IPIs using a single HW IPI. This generic IPI multiplexing is inspired by the Apple AIC irqchip driver and it is shared by various RISC-V irqchip drivers. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Hector Martin <marcan@marcan.st> Tested-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230103141221.772261-4-apatel@ventanamicro.com
2023-02-05irqchip/loongson-liointc: Save/restore int_edge/int_pol registers during S3/S4Huacai Chen
If int_edge/int_pol registers are configured to not be the default values, we should save/restore them during S3/S4. Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221207140643.1600743-1-chenhuacai@loongson.cn
2023-02-05irqchip/aspeed-scu-ic: Correctly initialise status and enable registersRyan Chen
The status and enable registers are never initialised with sensible default values. Fix those. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> [maz: commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230130085430.635583-1-ryan_chen@aspeedtech.com
2023-02-04Merge tag 'powerpc-6.2-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "It's a bit of a big batch for rc6, but just because I didn't send any fixes the last week or two while I was on vacation, next week should be quieter: - Fix a few objtool warnings since we recently enabled objtool. - Fix a deadlock with the hash MMU vs perf record. - Fix perf profiling of asynchronous interrupt handlers. - Revert the IMC PMU nest_init_lock to being a mutex. - Two commits fixing problems with the kexec_file FDT size estimation. - Two commits fixing problems with strict RWX vs kernels running at non-zero. - Reconnect tlb_flush() to hash__tlb_flush() Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy, and Sourabh Jain" * tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush() powerpc/kexec_file: Count hot-pluggable memory in FDT estimate powerpc/64s/radix: Fix RWX mapping with relocated kernel powerpc/64s/radix: Fix crash with unaligned relocated kernel powerpc/kexec_file: Fix division by zero in extra size estimation powerpc/imc-pmu: Revert nest_init_lock to being a mutex powerpc/64: Fix perf profiling asynchronous interrupt handlers powerpc/64s: Fix local irq disable when PMIs are disabled powerpc/kvm: Fix unannotated intra-function call warning powerpc/85xx: Fix unannotated intra-function call warning
2023-02-04Merge tag 'rtc-6.2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Here are a few fixes for 6.2. The EFI one is the most important as it allows some RTCs to actually work. The other two are warnings that are worth fixing. - efi: make WAKEUP services optional - sunplus: fix format string warning" * tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: sunplus: fix format string for printing resource dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property rtc: efi: Enable SET/GET WAKEUP services as optional
2023-02-04Merge tag 'kbuild-fixes-v6.2-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix two bugs (for building and for signing) when MODULE_SIG_KEY contains a PKCS#11 URI * tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI certs: Fix build error when PKCS#11 URI contains semicolon
2023-02-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM64: - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: aarch64: Test read-only PT memory regions KVM: selftests: aarch64: Fix check of dirty log PT write KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs KVM: selftests: aarch64: Relax userfaultfd read vs. write checks KVM: arm64: Allow no running vcpu on saving vgic3 pending table KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status KVM: arm64: Add helper vgic_write_guest_lock()
2023-02-04Merge tag 'parisc-for-6.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit kernel - pdc_iodc_print() dropped chars for newline in strings - Drop constants in favour of PRIV_USER - use safer strscpy() function in pdc_stable driver * tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c parisc: Fix return code of pdc_iodc_print() parisc: pdc_stable: use strscpy() to instead of strncpy()
2023-02-04Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC mailing list update from Stafford Horne: "The old mailing list for OpenRISC died due to some infrastructure issues and the people in charge decided not to keep it running. We have migrated this and the users over to kernel.org infrastructure. Sending this out now to avoid kernel developers getting lots of bounced mails for using the old list" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: Update OpenRISC mailing list
2023-02-04Merge tag 'kvmarm-fixes-6.2-3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.2, take #3 - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle
2023-02-04fbcon: Check font dimension limitsSamuel Thibault
blit_x and blit_y are u32, so fbcon currently cannot support fonts larger than 32x32. The 32x32 case also needs shifting an unsigned int, to properly set bit 31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font", as reported on: http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com Kernel Branch: 6.2.0-rc5-next-20230124 Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharing Reported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Fixes: 2d2699d98492 ("fbcon: font setting should check limitation of driver") Cc: stable@vger.kernel.org Tested-by: Miko Larsson <mikoxyzzz@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-02-03Merge branch 'ionic-code-maintenance'Jakub Kicinski
Shannon Nelson says: ==================== ionic: code maintenance These are a few fixes for a hardware bug, a couple of sw bugs, and a little code cleanup. ==================== Link: https://lore.kernel.org/r/20230202215537.69756-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: missed doorbell workaroundAllen Hubbe
In one version of the HW there is a remote possibility that it will miss the doorbell ring. This adds a bit of protection to be sure we don't stall a queue from a missed doorbell. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: clear up notifyq alloc commentaryShannon Nelson
Make sure the q+cq alloc for NotifyQ is clearly documented and don't bother with unnecessary local variables. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ionic: clean interrupt before enabling queue to avoid credit raceNeel Patel
Clear the interrupt credits before enabling the queue rather than after to be sure that the enabled queue starts at 0 and that we don't wipe away possible credits after enabling the queue. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Neel Patel <neel.patel@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHYHeiner Kallweit
Jerome provided the information that also the GXL internal PHY doesn't support MMD register access and EEE. MMD reads return 0xffff, what results in e.g. completely wrong ethtool --show-eee output. Therefore use the MMD dummy stubs. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03net: macb: Perform zynqmp dynamic configuration only for SGMII interfaceRadhey Shyam Pandey
In zynqmp platforms where firmware supports dynamic SGMII configuration but has other non-SGMII ethernet devices, it fails them with no packets received at the RX interface. To fix this behaviour perform SGMII dynamic configuration only for the SGMII phy interface. Fixes: 32cee7818111 ("net: macb: Add zynqmp SGMII dynamic configuration support") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reported-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1675340779-27499-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03bonding: fix error checking in bond_debug_reregister()Qi Zheng
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL") changed return value of debugfs_rename() in error cases from %NULL to %ERR_PTR(-ERROR), we should also check error values instead of NULL. Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"Andrew Morton
This fix was nacked by Philip, for reasons identified in the email linked below. Link: https://lkml.kernel.org/r/68f15d67-8945-2728-1f17-5b53a80ec52d@squashfs.org.uk Fixes: 72e544b1b28325 ("squashfs: harden sanity check in squashfs_read_xattr_id_table") Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Fedor Pchelkin <pchelkin@ispras.ru> Cc: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03fsdax: dax_unshare_iter() should return a valid lengthShiyang Ruan
The copy_mc_to_kernel() will return 0 if it executed successfully. Then the return value should be set to the length it copied. [akpm@linux-foundation.org: don't mess up `ret', per Matthew] Link: https://lkml.kernel.org/r/1675341227-14-1-git-send-email-ruansy.fnst@fujitsu.com Fixes: d984648e428b ("fsdax,xfs: port unshare to fsdax") Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03mm/gup: add folio to list when folio_isolate_lru() succeedKuan-Ying Lee
If we call folio_isolate_lru() successfully, we will get return value 0. We need to add this folio to the movable_pages_list. Link: https://lkml.kernel.org/r/20230131063206.28820-1-Kuan-Ying.Lee@mediatek.com Fixes: 67e139b02d99 ("mm/gup.c: refactor check_and_migrate_movable_pages()") Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Andrew Yang <andrew.yang@mediatek.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03aio: fix mremap after fork null-derefSeth Jenkins
Commit e4a0d3e720e7 ("aio: Make it possible to remap aio ring") introduced a null-deref if mremap is called on an old aio mapping after fork as mm->ioctx_table will be set to NULL. [jmoyer@redhat.com: fix 80 column issue] Link: https://lkml.kernel.org/r/x49sffq4nvg.fsf@segfault.boston.devel.redhat.com Fixes: e4a0d3e720e7 ("aio: Make it possible to remap aio ring") Signed-off-by: Seth Jenkins <sethjenkins@google.com> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Jann Horn <jannh@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03mailmap: add entry for Alexander MikhalitsynAlexander Mikhalitsyn
My old email <alexander.mikhalitsyn@virtuozzo.com> isn't working anymore. Link: https://lkml.kernel.org/r/20230131123456.192657-1-aleksandr.mikhalitsyn@canonical.com Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03mm: extend max struct page size for kmsanArnd Bergmann
After x86 enabled support for KMSAN, it has become possible to have larger 'struct page' than was expected when commit 5470dea49f53 ("mm: use mm_zero_struct_page from SPARC on all 64b architectures") was merged: include/linux/mm.h:156:10: warning: no case matching constant switch condition '96' switch (sizeof(struct page)) { Extend the maximum accordingly. Link: https://lkml.kernel.org/r/20230130130739.563628-1-arnd@kernel.org Fixes: 5470dea49f53 ("mm: use mm_zero_struct_page from SPARC on all 64b architectures") Fixes: 4ca8cc8d1bbe ("x86: kmsan: enable KMSAN builds for x86") Fixes: f80be4571b19 ("kmsan: add KMSAN runtime core") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03arm64: dts: qcom: sc7280: Add a herobrine CRD Pro SKURajendra Nayak
Some of the qualcomm qcard based herobrine devices can come with a Pro variant of the chipset on the qcard. Such Pro qcards have the smps9 from pm8350c ganged up with smps7 and smps8, so add a .dtsi for pro skus that deletes the smps9 node and include it from the new dts for the CRD Pro Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221216112918.1243-2-quic_rjendra@quicinc.com
2023-02-03dt-bindings: arm: qcom: Document the sc7280 CRD Pro boardsRajendra Nayak
Add compatibles for the Pro SKU of the sc7280 CRD boards which come with a Pro variant of the qcard. The Pro qcard variant has smps9 from pm8350c ganged up with smps7 and smps8. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221216112918.1243-1-quic_rjendra@quicinc.com
2023-02-03Documentation: amd-pstate: introduce new global sysfs attributesPerry Yuan
The amd-pstate driver supports switching working modes at runtime. Users can view and change modes by interacting with the "status" sysfs attribute. 1) check driver mode: $ cat /sys/devices/system/cpu/amd-pstate/status 2) switch mode: `# echo "passive" | sudo tee /sys/devices/system/cpu/amd-pstate/status` or `# echo "active" | sudo tee /sys/devices/system/cpu/amd-pstate/status` Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: convert sprintf with sysfs_emit()Perry Yuan
replace the sprintf with a more generic sysfs_emit function No intended potential function impact Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03Documentation: introduce amd pstate active mode kernel command line optionsPerry Yuan
AMD Pstate driver support another firmware based autonomous mode with "amd_pstate=active" added to the kernel command line. In autonomous mode SMU firmware decides frequencies at runtime based on workload utilization, usage in other IPs, infrastructure limits such as power, thermals and so on. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03Documentation: amd-pstate: add amd pstate driver mode introductionPerry Yuan
The amd-pstate driver has two operation modes supported: * CPPC Autonomous (active) mode * CPPC non-autonomous (passive) mode. active mode and passive mode can be chosen by different kernel parameters. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: add driver working mode switch supportPerry Yuan
While amd-pstate driver was loaded with specific driver mode, it will need to check which mode is enabled for the pstate driver,add this sysfs entry to show the current status $ cat /sys/devices/system/cpu/amd-pstate/status active Meanwhile, user can switch the pstate driver mode with writing mode string to sysfs entry as below. Enable passive mode: $ sudo bash -c "echo passive > /sys/devices/system/cpu/amd-pstate/status" Enable active mode (EPP driver mode): $ sudo bash -c "echo active > /sys/devices/system/cpu/amd-pstate/status" Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: implement suspend and resume callbacksPerry Yuan
add suspend and resume support for the AMD processors by amd_pstate_epp driver instance. When the CPPC is suspended, EPP driver will set EPP profile to 'power' profile and set max/min perf to lowest perf value. When resume happens, it will restore the MSR registers with previous cached value. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: implement amd pstate cpu online and offline callbackPerry Yuan
Adds online and offline driver callback support to allow cpu cores go offline and help to restore the previous working states when core goes back online later for EPP driver mode. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: implement Pstate EPP support for the AMD processorsPerry Yuan
Add EPP driver support for AMD SoCs which support a dedicated MSR for CPPC. EPP is used by the DPM controller to configure the frequency that a core operates at during short periods of activity. The SoC EPP targets are configured on a scale from 0 to 255 where 0 represents maximum performance and 255 represents maximum efficiency. The amd-pstate driver exports profile string names to userspace that are tied to specific EPP values. The balance_performance string (0x80) provides the best balance for efficiency versus power on most systems, but users can choose other strings to meet their needs as well. $ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_available_preferences default performance balance_performance balance_power power $ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_preference balance_performance To enable the driver,it needs to add `amd_pstate=active` to kernel command line and kernel will load the active mode epp driver Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: optimize driver working mode selection in ↵Wyes Karny
amd_pstate_param() The amd-pstate driver may support multiple working modes. Introduce a variable to keep track of which mode is currently enabled. Here we use cppc_state var to indicate which mode is enabled. This change will help to simplify the the amd_pstate_param() to choose which mode used for the following driver registration. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03Documentation: amd-pstate: add EPP profiles introductionPerry Yuan
The amd-pstate driver supports a feature called energy performance preference (EPP). Add information to the documentation to explain how users can interact with the sysfs files for this feature. 1) See all EPP profiles $ sudo cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences default performance balance_performance balance_power power 2) Check current EPP profile $ sudo cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference performance 3) Set new EPP profile $ sudo bash -c "echo power > /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference" Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03ACPI: CPPC: Add AMD pstate energy performance preference cppc controlPerry Yuan
Add support for setting and querying EPP preferences to the generic CPPC driver. This enables downstream drivers such as amd-pstate to discover and use these values. Downstream drivers that want to use the new symbols cppc_get_epp_caps and cppc_set_epp_perf for querying and setting EPP preferences will need to call cppc_set_epp_perf to enable the EPP function firstly. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 21:13:06 +0000