summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-01ALSA: hda - Fix the silent front with independent-HP for VIA codecsLydia Wang
Unmute DAC on front speaker path when Independent HP is enabled. When to enable Independent HP, the front speaker won't output any sound for VT1708, VT1708B, VT1708S and VT1702. I find the via_independent_hp_put() routine will mute DAC 0 path in Mixer 0. For these codecs, when using Independent HP, there could have two independent streams, one is from DAC0-->Mixer0-->Front Pin, the other is from DAC3-->GainSW3-->Side Pin. So I added a check for DAC-->Mixer path in activate_output_path(). If current path is DAC-->Mixer, no need to mute DAC index in Mixer. In fact, to change connection of Headphone pin or Mux connected with HP is enough. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-30ALSA: hda - Fix missing initialization in alc662 auto-parserTakashi Iwai
A missing initialization resulted in wrong DAC assignments in ALC662 (and other) auto-parsers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-30ALSA: hda - Re-implementation of VIA Independent-HP sharing with side streamTakashi Iwai
This patch adds the re-implementation of Independent-HP mode in the case where the DAC is shared between HP and side-channel streams. Now the driver tries to parse the output-path using the pre-parsed side-channel DAC for the independent HP output, too. When a playback PCM stream is opened with this shared mode, the Independent-HP mixer switch can't be changed for avoiding the conflict, thus it returns -EBUSY error. One remaining unintuitive issue is that the DAC volume is still controlled as "Side" volume although it's shared by both independent-HP and side streams. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-30ALSA: sb16 - Fix build errors on MIPS and others with 13bit ioctl sizeTakashi Iwai
One of ioctl definition in sound/sb16_csp.h contains the data size over 8kB, and this causes build errors on architectures like MIPS, which define _IOC_SIZEBITS=13. For avoiding this build errors but keeping the compatibility, manually expand with _IOC() instead of using _IOW() for the problematic ioctl. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-30ALSA: hdspm - Fix compile warnings with PPCTakashi Iwai
The char can be unsigned on some architectures. Since the code checks the negative values, they should be declared as signed char explicitly. sound/pci/rme9652/hdspm.c:5449: warning: comparison is always false due to limited range of data type sound/pci/rme9652/hdspm.c:5462: warning: comparison is always false due to limited range of data type Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-30ALSA: cs5535 - Fix invalid big-endian conversionsTakashi Iwai
Fix the wrongly converted short values: sound/pci/cs5535audio/cs5535audio_pcm.c:152: warning: large integer implicitly truncated to unsigned type sound/pci/cs5535audio/cs5535audio_pcm.c:160: warning: large integer implicitly truncated to unsigned type Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29ALSA: HDMI - fix ELD monitor name lengthWu Fengguang
I noticed that the last character of the ELD monitor name is lost, this fixes the issue. This fix should be confirming to the HDA spec, and works together with the DRM part of the ELD patch. The HDA spec does not mention that Monitor_Name_String is an '\0' ending string, and it allows NML to be 1, which is only valid when MNL does not count the possible ending '\0'. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29ALSA: hda - Fix jack-detection on non-VT1708 VIA codecsLydia Wang
Move codec init verb which is only applicatable for VT1708. I've found the root cause that jack plugged in can't be detected. The verb in vt1708_init_verbs is used to power down jack detect circuit. This verb is only applicable to VT1708. vt1708 didn't implement jack detect function in hardware, so we should shut down this function to avoid noise. But for other codecs, hardware implement jack detect function. If sending this verb during initialization, jack detect will be invalid. So I move this verb from via_parse_auto_config() to patch_vt1708(). Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29ALSA: hda - Fix unused variable warningTakashi Iwai
sound/pci/hda/patch_cmedia.c: In function ‘cmi9880_fill_multi_init’: sound/pci/hda/patch_cmedia.c:401:15: warning: unused variable ‘len’ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29ALSA: hda - Enable auto-parser as default for Conexant codecsTakashi Iwai
Let's use auto-parser as default now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2011-06-29ALSA: hda - Create snd_hda_get_conn_index() helper functionTakashi Iwai
Create snd_hda_get_conn_index() helper function for obtaining the connection index of the widget. Replaced the similar codes used in several codec-drivers with this common helper. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29ALSA: hda - Fix unsol event initializations for VIA codecsLydia Wang
Fix a issue to enable unsolicited response to line-out pins. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: atmel - update author email for ABDAC, AC97C and AT73C213Hans-Christian Egtvedt
This patch updates the email address of the sound drivers supported by me to an email account I will use on a more regular basis in the future. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: HDA: Add model=auto quirk for Acer Aspire 3830TGDavid Henningsson
Since we're not using the new auto parser as a fallback yet, add it manually as a quirk. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: HDA: Add a new Conexant codec ID (506c)David Henningsson
Conexant ID 506c was found on Acer Aspire 3830TG. As users report no playback, sending to stable should be safe. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/783582 Reported-by: andROOM Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: hda - Fix warnings with CONFIG_SND_POWER_SAVE=nTakashi Iwai
Use static inline for dummy function to fix the warnings like below sound/pci/hda/patch_sigmatel.c: In function ‘stac92xx_init’: sound/pci/hda/patch_sigmatel.c:4387:3: warning: statement with no effect sound/pci/hda/patch_sigmatel.c: In function ‘stac92xx_resume’: sound/pci/hda/patch_sigmatel.c:4927:3: warning: statement with no effect Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: hda - remove SND_HDA_POWER_SAVE protection of struct hda_loopback_checkStephen Rothwell
to fix build problems when it is disabled. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - More volume-init fixes for ALC267 codecTakashi Iwai
More similar fixes like previous commits: handle the exceptional case like ALC267 where no volume amp is found in ADC widget but in the capsrc widget instead. Also minor checks for avoiding possible erros: no connection-select when the pin has a single selection, and add beep verbs only when the 0x1d is used for beep. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Fix volume-init for ALC259 with invalid widget capsTakashi Iwai
ALC259 seems to provide an invalid widget capability for the input-src selector widget. The widget shows the input-amp while it's a selector, and this confuses the current ALC882 initialization code that is used for ALC259, too. For fixing this, check the amp capability and handle the connection selection individually. Also, ALC259 has no mute bit in DAC volume, so we need to initialize it as ZERO instead of MUTE. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Fix volume-init of ALC299 & coTakashi Iwai
ALC269 and compatible codecs have the output volume in DACs, thus we can't use the ALC880's code as is. Fixed by checking the amp caps and picking up the right widget for initialization. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Simplify EAPD control in patch_realtek.cTakashi Iwai
Look through the known NIDs that may have EAPD capabilities and turn on/off them appropriately instead of checking the individual vendor ids. This will also avoid the forgotten entries of newly added codec ids in future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Fix auto-init of output volumes of Realtek codecsTakashi Iwai
Fix the regression introduced by the commit 1f0f4b8036b1fe1347cb4f1f199601b87de9be46 ALSA: hda - Reduce static init verbs for Realtek auto-parsers The input amps of mixer widgets should be unmuted as default (as usually they have no assigned mixer switches). More fixes in this commit are, however, for ALC260: ALC260 codec can have multiple output mixers connnected to a single DAC althouh the driver didn't pick up them properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27Merge branch 'topic/via-cleanup' into topic/hdaTakashi Iwai
2011-06-27ALSA: hda - Check hard-wired DACs at first for ALC662 & coTakashi Iwai
Some Realtek codecs have the output pins hardwired with certain DACs. These DACs have to be assigned at first and assign the rest for multi-DAC pins so that all DACs can be assigned properly. Without such an optimization, speaker outputs may be assigned to the same DAC as the headphone or others. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Call proper DAC-filler function for Realtek auto-parserTakashi Iwai
In alc_auto_add_multi_channel_mode(), when the primary HP workaround is enabled, it re-initializes the DAC list but calls alc662's function in a fixed way. This isn't pretty suitable for other codecs, of course. Now we call it with fill_dac function pointer so that the proper function can be called at that point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-27ALSA: hda - Reduce static init verbs for Realtek auto-parsersTakashi Iwai
Instead of using fixed init verbs, initialize DACs, ADCs and mixers more dynamically for Realtek auto-parsers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-25ALSA: hda - Add snd_hda_get_conn_list() helper functionTakashi Iwai
Add a new helper function snd_hda_get_conn_list(). Unlike snd_hda_get_connections(), this function doesn't copy the connection-list but gives the raw pointer for the cached list. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-06-24ALSA: Remove unneeded version.h includes from sound/Jesper Juhl
In the sound/ directory there are two files (flagged by 'make versioncheck'); sound/pci/asihpi/asihpi.c and sound/soc/codecs/wm8991.c that include linux/version.h although they don't need it. This patch removes the unneeded includes. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24ALSA: hda - Use alc_get_pfx_name() for all Realtek codecsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24ALSA: hda - Clean up multi-channel mixer name assignment in patch_realtek.cTakashi Iwai
Change alc_get_line_out_pfx() in patch_realtek.c to provide the channel specific name and assign the index so that each caller doesn't have to set the channel name by itself. Also, check the multi-io case with the primary hp-out; for the multi-io channels, assign the channel name instead of "Headphone" with indices. This makes the mixer names more intuitive and reduces confusion. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24ALSA: hda - Add a workaround for invalid line-out setupsTakashi Iwai
Some BIOS set up the pin config wrongly as line-out although it's supposed to be a speaker out. In most cases, though, we can judge the validity by checking the connection type -- when it's FIXED, mostly it's an invalid line-out but a speaker. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2011-06-24ALSA: hda - Allow multi-io with HP output for ALC662 & coTakashi Iwai
Even if the machine has no line-out but only HP-out, try to detect the multi-io. It'll allow more possibilities for 5.1 outputs on laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-23ASoC: pxa-ssp: Correct check for stream presenceDaniel Mack
Don't rely on the codec's channels_min information to decide wheter or not allocate a substream's DMA buffer. Rather check if the substream itself was allocated previously. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-06-23ASoC: imx: add missing module informationsArnaud Patard (Rtp)
- add some modules aliases - add module license to avoid tainted kernel when loading the imx-pcm-audio driver Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-23ASoC: imx: Remove unused Kconfig SND_MXC_SOC_SSI entryArnaud Patard (Rtp)
SND_MXC_SOC_SSI looks to be unused, so kill it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-23ALSA: HDA: Pinfix quirk for HP Z200 WorkstationDavid Henningsson
BIOS lists the internal speaker as an internal line-out. Change to internal speaker + model=auto for better auto-mute capabilities. BugLink: http://bugs.launchpad.net/bugs/754964 Reported-by: Marc Legris <marc.legris@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-22ALSA: hda - Implement dynamic-ADC switching for VIA codecsTakashi Iwai
Some VIA codecs like VT1702 provide the input-route only to specific ADCs such as digital-mic inputs. These routes aren't covered by the normal primary ADC, and for now, user had to open the capture stream assigned to that special ADC manually for using such inputs. This patch implements a way to switch the current ADC dynamically per the input-source selection in such a case. When this workaround is activated, the driver provides only one capture stream and one input- source control but with the full possible inputs. The driver switches the ADC to be used (or being used) according to the input-source on the fly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - Auto-mute smart51 surround pins for VIA codecsTakashi Iwai
When smart51 mode is enabled, auto-mute these surround outputs as well as the primary line-out. Also this patch includes minor clean-ups. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - Remove redundant VT1709 and VT1708B codesTakashi Iwai
Unify the VT1709 10ch and 6ch parsers, as well as VT1708B 8ch and 4ch parsers. They have no difference now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - VT1708 independent HP routing fixTakashi Iwai
The codecs like VT1708 needs more complicated routing using the mixer widget rather than the simple selector widgets. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - Fix surround-volume parsing for VT1708B codecsTakashi Iwai
The surround/CLFE/side DACs on VT1708B and co have no amp but the connected selector widgets have the amp instead. Fix the parser to check these selector widgets for the possible mixer controls as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - Fix the check of loopback-mixer element index in patch_via.cTakashi Iwai
Fix the check of the multiple loopback-mixer, which gave sometimes a wrong index assigned to an element even for different names, e.g. Mic and Front Mic. Now check the label properly for avoid duplication. Reported-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - Assign smart51 only in the same stack for VIA codecsTakashi Iwai
The input jacks assigned as the smart51 outputs must be in the same stack, either rear, front or other. Also, prefer line-in as the surround to mic-in. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - Fix re-routing of HP-independent mode in patch_via.cTakashi Iwai
Re-route the whole output path when HP-independent mode is changed. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - Fix creations of playback volume controls in patch_via.cLydia Wang
Fix a issue to create playback volume control if pin has amplifier capability but not DAC. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - Revisit output_path parsing in patch_via.cTakashi Iwai
Change the order of the output-path list in a way from the DAC to the target pin. Also now the list include the target pin, too. Together with this format change, simplify the arguments of parse_output_path() function, and fix the initialization in via_auto_init_output(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-21ALSA: hda - Use xxx Boost Volume for VIATakashi Iwai
Drop "Capture" prefix from the mic-boost names. Otherwise some control names can overflow the max name length. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-12 13:09:46 +0000