summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-19bnxt_en: Add basic support for Nitro in North Star 2.Prashant Sreedharan
Nitro is the embedded version of the ethernet controller in the North Star 2 SoC. Add basic code to recognize the chip ID and disable the features (ntuple, TPA, ring and port statistics) not supported on Nitro A0. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19Merge branch 'marvell-phy'David S. Miller
Charles-Antoine Couret says: ==================== Marvell phy: fiber interface configuration Another patchset to manage correctly the fiber link for some concerned Marvell's phy like 88E1512. This patchset fixed the commit log for the third and last commits and a comment in the first commit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19Marvell phy: add functions to suspend and resume both interfaces: fiber and ↵Charles-Antoine Couret
copper links. These functions used standards registers in a different page for both interfaces: copper and fiber. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19Marvell phy: add configuration of autonegociation for fiber link.Charles-Antoine Couret
To be correctly initilized, the fiber interface needs to be configured via autonegociation registers which use some customs options or registers. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19Marvell phy: add field to get errors from fiber link.Charles-Antoine Couret
Add support for the fiber receiver error counter in the statistics. Rename the current counter which is for copper errors to phy_receive_errors_copper, so it is easy to distinguish copper from fiber. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19Marvell phy: check link status in case of fiber link.Charles-Antoine Couret
For concerned phy, the fiber link is checked before the copper link. According to datasheet, the link which is up is enabled. If both links are down, copper link would be used. To detect fiber link status, we used the real time status because of troubles with the copper method. Tested with Marvell 88E1512. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19Merge branch 'renesas-dma-channel'David S. Miller
Sergei Shtylyov says: ==================== Fix DMA channel misreporting for the Renesas Ethernet drivers Here's a set of 2 patches against DaveM's 'net.git' repo fixing up the DMA channel reporting by 'ifconfig'... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19sh_eth: fix DMA channel misreportingSergei Shtylyov
Currently 'ifconfig' for the Ethernet devices handled by this driver shows "DMA chan: ff" while the driver doesn't use any DMA channels. Not assigning a value to 'net_device::dma' causes 'ifconfig' to correctly not report a DMA channel. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19ravb: fix DMA channel misreportingSergei Shtylyov
Currently 'ifconfig' for the Ethernet devices handled by this driver shows "DMA chan: ff" while the driver doesn't use any DMA channels. Not assigning a value to 'net_device::dma' causes 'ifconfig' to correctly not report a DMA channel. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19NFC: nfcsim: Simulate lost frames through debugfs entryThierry Escande
This patch allows to simulate the lost of frames exchanged between the 2 nfcsim devices through a control entry in the debugfs and is used as follow: echo n > /sys/kernel/debug/nfcsim/nfcX/dropframe Where n specifies the number of frames to be dropped between 0 and 255 and nfcX is either nfc0 or nfc1, one of the two nfcsim devices. In the following example, the next frame that should be sent by the nfc0 device will be dropped and thus not received by the nfc1 device: echo 1 > /sys/kernel/debug/nfcsim/nfc0/dropframe The value of 0 can be used to reset the dropframe counter. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-19NFC: nfcsim: Add support for sysfs control entryThierry Escande
The idea is to have a way to control and/or modify the behavior of the nfcsim virtual devices. This patch creates a folder tree in the debug filesystem. The debugfs is usually mounted into /sys/kernel/debug and the nfcsim entries are located in DEBUGFS/nfcsim/nfcX/ where X is either 0 or 1 depending on the device you want to address. These folders are empty for now and control entries will be added by upcoming commits. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-19nfit: make DIMM DSMs optionalDan Williams
Commit 4995734e973a "acpi, nfit: fix acpi_check_dsm() vs zero functions implemented" attempted to fix a QEMU regression by supporting its usage of a zero-mask as a valid response to a DSM-family probe request. However, this behavior breaks HP platforms that return a zero-mask by default causing the probe to misidentify the DSM-family. Instead, the QEMU regression can be fixed by simply not requiring the DSM family to be identified. This effectively reverts commit 4995734e973a, and removes the DSM requirement from the init path. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Fixes: 4995734e973a ("acpi, nfit: fix acpi_check_dsm() vs zero functions implemented") Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com> Tested-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-19drivers: atm: nicstar: Use the correct function to free some resourcesChristophe Jaillet
In 'get_scq', 'dma_alloc_coherent' has been used to allocate some resources, so we need to free them using 'dma_free_coherent' instead of 'kfree'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net: ti: cpmac: Use the correct function to free some resources.Christophe Jaillet
In 'cpmac_open', 'dma_alloc_coherent' has been used to allocate some resources, so we need to free them using 'dma_free_coherent' instead of 'kfree'. Also, we don't need to free these resources if the allocation has failed. So I have slighly modified the goto label in this case. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.8. Major changes: ath9k * implement temperature compensation support for AR9003+ ath10k * disable wake_tx_queue() mac80211 op for older devices to workaround throughput regression
2016-07-19rtlwifi: don't add include path for rtl8188eeArnd Bergmann
For rtl8188ee, we pass -Idrivers/net/wireless/rtlwifi/ to gcc, however that directy no longer exists, so evidently this option is no longer required here and can be removed to avoid a warning when building with 'make W=1' or 'gcc -Wmissing-include-dirs' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19mtd: add arch dependency for MTD_BCM47XXSFLASH symbolRafał Miłecki
We dropped strict MIPS dependency for bcm47xxsflash driver in: commit 5651d6aaf489 ("mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR()") but using ioremap_cache still limits building it to few selected architectures only. A recent commit 57d8f7dd2132 ("bcma: allow enabling serial flash support on non-MIPS SoCs") automatically dropped MIPS dependency for MTD_BCM47XXSFLASH which broke building e.g. on powerpc and cris. The bcma change is alright as it doesn't break building bcma code in any way. MTD_BCM47XXSFLASH on the other hand should be limited to archs which need it and can build it (by providing ioremap_cache). Fixes: 57d8f7dd2132 ("bcma: allow enabling serial flash support on non-MIPS SoCs") Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19wlcore: spi: add wl18xx supportEyal Reizer
Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the init stage. Signed-off-by: Eyal Reizer <eyalr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19brcmsmac: Initialize power in brcms_c_stf_ss_algo_channel_get()Florian Fainelli
wlc_phy_txpower_get_current() does a logical OR of power->flags, which presumes that power.flags was initiliazed earlier by the caller, unfortunately, this is not the case, so make sure we zero out the struct tx_power before calling into wlc_phy_txpower_get_current(). Reported-by: coverity (CID 146011) Fixes: 5b435de0d7868 ("net: wireless: add brcm80211 drivers") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19brcmsmac: Free packet if dma_mapping_error() fails in dma_rxfillFlorian Fainelli
In case dma_mapping_error() returns an error in dma_rxfill, we would be leaking a packet that we allocated with brcmu_pkt_buf_get_skb(). Reported-by: coverity (CID 1081819) Fixes: 67d0cf50bd32 ("brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chainFlorian Fainelli
In case brcmf_sdiod_recv_chain() cannot complete a succeful call to brcmf_sdiod_buffrw, we would be leaking glom_skb and not free it as we should, fix this. Reported-by: coverity (CID 1164856) Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19bcma: define ChipCommon B MII registersRafał Miłecki
We don't have access to datasheets to document all the bits but we can name these registers at least. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19ath9k_hw: implement temperature compensation support for AR9003+Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19ath9k_hw: get rid of some duplicate code in calibration initFelix Fietkau
Remove a misleading debug message as well Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19ath9k_hw: simplify ar9003_hw_per_calibrationFelix Fietkau
Reduce indentation, use a variable to save a few pointer dereferences Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19ath9k_hw: fix duplicate (and partially wrong) definition of AR_CH0_THERMFelix Fietkau
AR_PHY_65NM_CH0_THERM and AR_CH0_THERM were supposed to refer to the same register, however they had different SREV checks. Remove the duplicate and use the checks. Since there were other SREV checks present in the only place that uses this, this will probaby not affect runtime behavior. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19ath9k_hw: fix spectral scan on AR9285 and newerFelix Fietkau
The register layout of AR_PHY_SPECTRAL_SCAN has changed, only AR9280 uses the old layout Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19ath9k: simplify the code-paths when not using the built-in EEPROMMartin Blumenstingl
There were two paths in the code for "external" eeprom sources. The code in eeprom.c only handled the cases where the eeprom data was loaded via request_firmware. ahb.c and pci.c on the other hand had some duplicate code which was only used when the eeprom data was passed via ath9k_platform_data. With this change all eeprom data handling is now unified in eeprom.c. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19ath6kl: sme_state shortcut to SME_DISCONNECTED removedDan Kephart
When an NL80211_DISCONNECT is sent to cfg80211, the driver's cfg80211 disconnect function sets the sme_state to SME_DISCONNECTED before receiving a WMI_DISCONNECT_EVENT from the firmware. This caused cfg80211 to not know that the connection is disconnected because the driver fails to notify cfg80211 upon receiving WMI_DISCONNECT_EVENT from the firmware believing it is already disconnected. Signed-off-by: Dan Kephart <dan.kephart@lairdtech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19netfilter: nft_ct: fix unpaired nf_connlabels_get/put callLiping Zhang
We only get nf_connlabels if the user add ct label set expr successfully, but we will also put nf_connlabels if the user delete ct lable get expr. This is mismathced, and will cause ct label expr cannot work properly. Also, if we init something fail, we should put nf_connlabels back. Otherwise, we may waste to alloc the memory that will never be used. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-19ath6kl: Unset IFF_LOWER_UP flag on AP mode leave.Pierre Le Magourou
When disabling tethering after having enabled it, the ath6kl driver does not set the IFF_LOWER_UP flag to 0 (carrier off) on the wlan interface. The upper layers (eg. connman) are not notified of the tethering mode status change. So, tethering can not be activated anymore. This patch adds a netif_carrier_off() call when stopping AP mode to fix the problem. Signed-off-by: Pierre Le Magourou <plemagourou@aldebaran.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19ath6kl: Fix wrong regulatory domain disconnection.Pierre Le Magourou
One minute after a successful connection, the kernel checks if the frequency and the channel width are well configured for the country we are in. (regulatory domain) ath6kl driver was setting the NL80211_CHAN_HT20 channel without checking for the HT capabilities. (we should have NL80211_CHAN_NO_HT in our case because the firmware did not support HT) This patch adds a check on ht_cap.ht_supported in order to create the channel corresponding to the firmware capabilities. Signed-off-by: Pierre Le Magourou <plemagourou@aldebaran.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19ath6kl: Fix WLAN tethering authentication problem.Pierre Le Magourou
When enabling WLAN tethering, a new AP is visible and a STA could connect to it. When the STA tries to authenticate to the newly created AP, the WPA authentication mechanism is stuck in the 1/4 msg of 4-Way Handshake. In ath6kl_rx(), the ath6kl_find_sta() function is looking for the h_source field of the Ethernet frame header received by the STA. The datap pointer that points to the Ethernet frame header is incorrect, and was pointing at the wrong offset in the buffer. This commit adds a pad_before_data_start offset to set the datap pointer to the Ethernet frame header. datap->h_source parameter is now really pointing to the source ethernet address and the authentication process can continue. Signed-off-by: Pierre Le Magourou <plemagourou@aldebaran.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19ath10k: disable wake_tx_queue for older devicesMichal Kazior
Ideally wake_tx_queue should be used regardless as it is a requirement for reducing bufferbloat and implementing airtime fairness in the future. However some setups (typically low-end platforms hosting QCA988X) suffer performance regressions with the current wake_tx_queue implementation. Therefore disable it unless it is really beneficial with current codebase (which is when firmware supports smart pull-push tx scheduling). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-19Merge tag 'topic/kbl-4.7-fixes-2016-07-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes As promised here's the pile of kbl cherry-picks assembled by Mika&Rodrigo. It's a bit much, but all well-contained to kbl code and been tested for a while in drm-intel-next. Still separate in case too much, but in that case I think we'd need to disable kbl by default again (which would be annoying too) in 4.7. * tag 'topic/kbl-4.7-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel: (28 commits) drm/i915/kbl: Introduce the first official DMC for Kabylake. drm/i915: Introduce Kabypoint PCH for Kabylake H/DT. drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance drm/i195/fbc: Add WaFbcNukeOnHostModify drm/i915/gen9: Add WaFbcWakeMemOn drm/i915/gen9: Add WaFbcTurnOffFbcWatermark drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch drm/i915/gen9: Add WaEnableChickenDCPR drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing drm/i915/kbl: Add WaDisableGafsUnitClkGating drm/i915/kbl: Add WaForGAMHang drm/i915: Add WaInsertDummyPushConstP for bxt and kbl drm/i915/kbl: Add WaDisableDynamicCreditSharing drm/i915/kbl: Add WaDisableGamClockGating drm/i915/gen9: Enable must set chicken bits in config0 reg drm/i915/kbl: Add WaDisableLSQCROPERFforOCL drm/i915/kbl: Add WaDisableSDEUnitClockGating drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0 drm/i915/kbl: Add WaEnableGapsTsvCreditFix ...
2016-07-19m68k/defconfig: Update defconfigs for v4.7-rc2Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-07-19Merge tag 'drm-intel-fixes-2016-07-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Two more regression fixes for 4.7. * tag 'drm-intel-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel: drm/i915: add missing condition for committing planes on crtc drm/i915: Treat eDP as always connected, again
2016-07-18sctp: load transport header after sk_filterWillem de Bruijn
Do not cache pointers into the skb linear segment across sk_filter. The function call can trigger pskb_expand_head. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-18net/sched/sch_htb: clamp xstats tokens to fit into 32-bit intKonstantin Khlebnikov
In kernel HTB keeps tokens in signed 64-bit in nanoseconds. In netlink protocol these values are converted into pshed ticks (64ns for now) and truncated to 32-bit. In struct tc_htb_xstats fields "tokens" and "ctokens" are declared as unsigned 32-bit but they could be negative thus tool 'tc' prints them as signed. Big values loose higher bits and/or become negative. This patch clamps tokens in xstat into range from INT_MIN to INT_MAX. In this way it's easier to understand what's going on here. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-18macvtap: correctly free skb during socket destructionJason Wang
We should use kfree_skb() instead of kfree() to free an skb. Fixes: 362899b8725b ("macvtap: switch to use skb array") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-18clk: at91: fix clk_programmable_set_parent()Boris Brezillon
Since commit 1bdf02326b71e ("clk: at91: make use of syscon/regmap internally"), clk_programmable_set_parent() is always selecting the first parent (AKA slow_clk), no matter what's passed in the 'index' parameter. Fix that by initializing the pckr variable to the index value. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Hans Verkuil <hans.verkuil@cisco.com> Fixes: 1bdf02326b71e ("clk: at91: make use of syscon/regmap internally") Cc: <stable@vger.kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1468828152-18389-1-git-send-email-boris.brezillon@free-electrons.com
2016-07-18libata: LITE-ON CX1-JB256-HP needs lower max_sectorsTejun Heo
Since 34b48db66e08 ("block: remove artifical max_hw_sectors cap"), max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON CX1-JB256-HP keeps timing out with higher max_sectors. Revert it to the previous value. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: dgerasimov@gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671 Cc: stable@vger.kernel.org # v3.19+ Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap") Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.8. Major changes: ath10k * enable support for QCA9888
2016-07-18Merge tag 'iwlwifi-next-for-kalle-2016-07-11' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * bump firmware version to load newer firmwares
2016-07-18bcma: allow enabling serial flash support on non-MIPS SoCsRafał Miłecki
So far we had only MIPS devices with serial flash connected to the SoC's ChipCommon. ARM devices got a separated SPI controller and weere using standard SPI drivers. This has changed with the wireless SoC BCM47189B0. It's ARM based but has serial flash attached just like older devices. This allows using existing driver with these devices. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18mwifiex: update command response skb length correctlyAmitkumar Karwar
Same skb is being reused for storing command response from firmware in PCIe chipsets. There was a bug while updating the skb length. This patch ensures skb length correctly gets updated based on rx_len. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18mwifiex: fix PCIe legacy interrupt problemAmitkumar Karwar
In corner case, we may end up processing same interrupt twice. We have a logic to read pending interrupts at the end of interrupt processing routine. It has a race with interrupts read in interrupt handler. This patch solves the problem by ORing the interrupt bitmap in this case. The symptom for this bug is below messages in dmesg log. [ 11.522123] mwifiex_pcie 0000:01:00.0: CMD_RESP: invalid cmd resp [ 11.680412] mwifiex_pcie 0000:01:00.0: There is no command but got cmdrsp Link: https://bugzilla.kernel.org/show_bug.cgi?id=109681 Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18mwifiex: Fix request_irq() failure handlingKarthik D A
It's been observed that request_irq() failure leads to a system crash due to a bug in mwifiex driver. When this failure happens, mwifiex_add_card() already takes care of clearing and freeing adapter->card pointer. This patch removes the redundant cleanup code causing crash. Signed-off-by: Karthik D A <karthida@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18brcmfmac: defer DPC processing during probeArend Van Spriel
The sdio dpc starts processing when in SDIOD_STATE_DATA. This state was entered right after firmware download. This patch moves that transition just before enabling sdio interrupt handling thus avoiding watchdog expiry which would put the bus to sleep while probing. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18brcmfmac: restore stopping netdev queue when bus clogs upArend Van Spriel
When the host-interface bus has hard time handling transmit packets it informs higher layer about this and it would stop the netdev queue when needed. However, since commit 9cd18359d31e ("brcmfmac: Make FWS queueing configurable.") this was broken. With this patch the behaviour is restored. Cc: stable@vger.kernel.org # v4.5, v4.6, v4.7 Fixes: 9cd18359d31e ("brcmfmac: Make FWS queueing configurable.") Tested-by: Per Förlin <per.forlin@gmail.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-20 20:23:47 +0000