summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-26i2c-i801: Use usleep_range to wait for command completionJean Delvare
Use usleep_range instead of msleep when waiting for command completion. Most SMBus commands complete in less than 2 jiffies so this brings a pleasant performance boost. Strongly inspired from a similar change by Olivier Sobrie to the i2c-isch driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Olivier Sobrie <olivier@sobrie.be>
2012-03-26i2c-i801: Add device IDs for Intel Lynx PointSeth Heasley
Add the SMBus controller device IDs for the Intel Lynx Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26i2c-isch: Decrease delay in command completion check loopOlivier Sobrie
Generally it is not needed to wait for 1 msec, the SMBus get often ready in less than 200 usecs. msleep(1) can wait up to 20 msecs... It has a significant impact when there is a burst of transactions on the bus. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26i2c-gpio: Use linux/gpio.h rather than asm/gpio.hMark Brown
Direct inclusion of asm/gpio.h has been deprecated for a while now due to the cross platform gpiolib. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26drivers/platform/x86/amilo-rfkill.c::amilo_rfkill_probe() avoid NULL derefJesper Juhl
In drivers/platform/x86/amilo-rfkill.c::amilo_rfkill_probe() the call to dmi_first_match() may fail and return NULL. If it does return NULL, then we'll be dereferencing a NULL pointer in the rfkill_alloc() call where we do 'system_id->driver_data' --> KABOOM! Avoid that problem by testing for a NULL return value from dmi_first_match() and bailing out if it fails. I was a bit uncertain about what to return in the failure case. In the end I settled for -ENXIO as the most logical error to return. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26samsung-laptop: unregister ACPI video module for some well known laptopsCorentin Chary
On these laptops, the ACPI video is not functional, and very unlikely to be fixed by the vendor. Note that intel_backlight works for some of these laptops, and the backlight from samsung-laptop always work. The good news is that newer laptops have functional ACPI video device and won't end up growing this list. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26acer-wmi: No wifi rfkill on Sony machinesLee, Chun-Yi
The wireless rfkill should charged by sony-laptop but not acer-wmi. So, add Sony's SNY5001 acpi device to blacklist in acer-wmi. Tested on Sony Vaio Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Mattia Dongili <malattia@linux.it> Cc: Dimitris N <ddarlac@gmail.com> Tested-by: Dimitris N <ddarlac@gmail.com> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26rtlwifi: rtl8192ce: rtl8192cu: rtl8192de: Fix low-gain setting when scanningLarry Finger
In https://bugzilla.redhat.com/show_bug.cgi?id=770207, slowdowns of driver rtl8192ce are reported. One fix (commit a9b89e2) has already been applied, and it helped, but the maximum RX speed would still drop to 1 Mbps. As in the previous fix, the initial gain was determined to be the problem; however, the problem arises from a setting of the gain when scans are started. Driver rtl8192de also has the same code structure - this one is fixed as well. Reported-and-Tested-by: Ivan Pesin <ivan.pesin@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26ath5k: drop self from MAINTAINERSBob Copeland
I simply don't have any hobby hacking time after family time and non-kernel-related job time, so I resume status as part-time mailing list lurker. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26mac80211: fix possible tid_rx->reorder_timer use after freeStanislaw Gruszka
Is possible that we will arm the tid_rx->reorder_timer after del_timer_sync() in ___ieee80211_stop_rx_ba_session(). We need to stop timer after RCU grace period finish, so move it to ieee80211_free_tid_rx(). Timer will not be armed again, as rcu_dereference(sta->ampdu_mlme.tid_rx[tid]) will return NULL. Debug object detected problem with the following warning: ODEBUG: free active (active state 0) object type: timer_list hint: sta_rx_agg_reorder_timer_expired+0x0/0xf0 [mac80211] Bug report (with all warning messages): https://bugzilla.redhat.com/show_bug.cgi?id=804007 Reported-by: "jan p. springer" <jsd@igroup.org> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26rt2x00: rt2800usb: fix status register reread logicStanislaw Gruszka
Another good catch from Jakub Kicinski. This patch fixes my recent commit: ed61e2b02027935520d1be884fac0b2ffce8379a "rt2x00: rt2800usb: rework txdone code" We should reread status register only when nobody else start already reading status i.e. test_and_set_bit(TX_STATUS_READING, flags) return 0. Reported-by: Jakub Kicinski <moorray@wp.pl> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26rt2x00: rt2800usb: schedule txdone work on timeoutStanislaw Gruszka
This is fix for my current commit ed61e2b02027935520d1be884fac0b2ffce8379a "rt2x00: rt2800usb: rework txdone code" We should schedule txdone work on timeout, otherwise if newer get tx status from hardware, we will never report tx status to mac80211 and eventually never wakeup tx queue. Reported-by: Jakub Kicinski <moorray@wp.pl> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26mac80211: remove outdated commentEliad Peller
The on-oper-channel optimization was reverted, so remove the outdated comment as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26ath9k: fix a memory leak in ath_rx_tasklet()Eric Dumazet
commit 0d95521ea7 (ath9k: use split rx buffers to get rid of order-1 skb allocations) added in memory leak in error path. sc->rx.frag should be cleared after the pskb_expand_head() call, or else we jump to requeue_drop_frag and leak an skb. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: John W. Linville <linville@tuxdriver.com> Cc: Trond Wuellner <trond@chromium.org> Cc: Grant Grundler <grundler@chromium.org> Cc: Paul Stewart <pstew@chromium.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26ath9k: reduce listen time periodRajkumar Manoharan
When we have downlink traffic alone and the station is going thru bgscan, the client is out of operating channel for around 1000ms which is too long. The mac80211 decides when to switch back to oper channel based on tx queue, bad latency and listen time. As the station does not have tx traffic, the bgscan can easily affect downlink throughput. By reducing the listen time, it helps the associated AP to retain the downstream rate. Cc: Paul Stewart <pstew@google.com> Tested-by: Gary Morain <gmorain@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26cfg80211: allow CFG80211_SIGNAL_TYPE_UNSPEC in station_infoJohn W. Linville
The station_info struct had demanded dBm signal values, but the cfg80211 wireless extensions implementation was also accepting "unspecified" (i.e. RSSI) unit values while the nl80211 code was completely unaware of them. Resolve this by formally allowing the "unspecified" units while making nl80211 ignore them. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
2012-03-26iwlegacy: fix BSSID settingStanislaw Gruszka
Current commit 0775f9f90cdaf40fbf69b3192b3dddb2b3436f45 "mac80211: remove spurious BSSID change flag" exposed bug on iwlegacy, that we do not set BSSID address correctly and then device was not able to receive frames after successful associate. On the way fix scan canceling comment. Apparently ->post_associate() do cancel scan itself, but scan cancel on BSS_CHANGED_BSSID is needed. I'm not sure why, but when I removed it, I had frequent auth failures: wlan4: send auth to 54:e6:fc:98:63:fe (try 1/3) wlan4: send auth to 54:e6:fc:98:63:fe (try 2/3) wlan4: send auth to 54:e6:fc:98:63:fe (try 3/3) wlan4: authentication with 54:e6:fc:98:63:fe timed out Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26ath9k: fix max noise floor thresholdRajkumar Manoharan
Currently the maximum noise floor limit is set as too high (-60dB). The assumption of having a higher threshold limit is that it would help de-sensitize the receiver (reduce phy errors) from continuous interference. But when we have a bursty interference where there are collisions and then free air time and if the receiver is desensitized too much, it will miss the normal packets too. Lets make use of chips specific min, nom and max limits always. This patch helps to improve the connection stability in congested networks. Cc: stable@vger.kernel.org Cc: Paul Stewart <pstew@google.com> Tested-by: Gary Morain <gmorain@google.com> Signed-off-by: Madhan Jaganathan <madhanj@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26iwlegacy: do not nulify il->vif on resetStanislaw Gruszka
This il->vif is dereferenced in different part of iwlegacy code, so do not nullify it. This should fix random crashes observed in companion with microcode errors i.e. crash in il3945_config_ap(). Additionally this should address also WARNING: at drivers/net/wireless/iwlegacy/common.c:4656 il_mac_remove_interface at least one of the possible reasons of that warning. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26thinkpad-acpi: recognize Lenovo as version string in newer V-series BIOSManoj Iyer
The newer V series bios reports product version as 'Lenovo' instead of 'ThinkPad'. Recoginze this new string so that the module can load. Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: James Ferguson <james.ferguson@canonical.com> Tested-by: Dennis Chua <dennis.chua@canonical.com> Tested-by: Ike Pan <ike.pan@canonical.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
2012-03-26asus-wmi: don't update power and brightness when using scalarCorentin Chary
But we can still do it on other boards, as this might happen if the backlight driver change when update_bl is called. Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26eeepc-wmi: split et2012 specific hacksCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26eeepc-wmi: refine quirks handlingCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-nb-wmi: set panel_power correctlyCorentin Chary
Even if it's currently unused. Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-wmi: move WAPF variable into quirks_entryCorentin Chary
Some models work better with different values of wapf, so move the variable into quriks_entry to make it more easy to give a specific value to different models. Based on original patch from AceLan Kao <acelan.kao@canonical.com> Cc: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-wmi: store backlight power status for AIO machineAceLan Kao
Due to some implementation reasons, ASUS ET2012 All-in-One machines can't report the correct backlight power status, it will always return 1. To track the backlight power status correctly, we have to store the status by ourselves. BTW, by the BIOS design, the backlight power will be turn on/off sequently, no matter what the value of the parameter will be. More over, the brightness adjustment command will turn on the backlight power. Those behaviors will make us fail to track the backlight power status. For example, While we are trying to turn on the backlight power, we will send out the brightness adjustment command and then trying to figure out if we have to turn on the backlight power, then send out the command. But, the real case is that, the backlight power turns on while sending the brightness adjustment command, and then we send out the command to turn on the backlight power, it actually will turn off the backlight power and the backlight power status we recorded becomes wrong. So, we have to seperate these two commands by a if statement. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-wmi: add scalar board brightness adj. supportAceLan Kao
Some ASUS ET2012E/I All-in-One machines that use a scalar board to control the brightness, and they only accept brightness up and down command. So, I introduced a get_scalar_command() function to pass the command to the scalar board through WMI. Besides, we have to store the brightness value locally, for we need the old value to know the brightness value is increasing or decreasing. BTW, since there is no way to retrieve the actual brightness(it would be a fixed value), and the max brightness value would be fixed to 1, so we have to keep passing the brightness up/down command when we reached the max brightness value or 0. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26samsung-laptop: cleanup return type: mode_t vs umode_tDan Carpenter
This function returns a umode_t (unsigned short) instead of mode_t which is an unsigned int on some architectures. Cleaning this up silences a compile warning: drivers/platform/x86/samsung-laptop.c:1108:2: warning: initialization from incompatible pointer type [enabled by default] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26drivers, samsung-laptop: fix usage of isalnumDavid Rientjes
linux/ctype.h is needed for isalnum() to avoid a build error: drivers/platform/x86/samsung-laptop.c: In function ‘samsung_sabi_diag’: drivers/platform/x86/samsung-laptop.c:1306: error: implicit declaration of function ‘isalnum’ Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26drivers, samsung-laptop: fix initialization of sabi_data in sabi_set_commandbDavid Rientjes
Fields d0, d1, d2, and d3 are members of an anonymous struct inside an anonymous union inside struct sabi_data. Initialization must be done by wrapping the anonymous union and structs with brackets to avoid a build error: drivers/platform/x86/samsung-laptop.c: In function ‘sabi_set_commandb’: drivers/platform/x86/samsung-laptop.c:433: error: unknown field ‘d0’ specified in initializer drivers/platform/x86/samsung-laptop.c:433: warning: missing braces around initializer drivers/platform/x86/samsung-laptop.c:433: warning: (near initialization for ‘in.<anonymous>’) ... Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-wmi: on/off bit is not set when reading the valueCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26eeepc-wmi: add extra keymaps for EP121Chih-Wei Huang
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-nb-wmi: ignore useless keysCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26acer-wmi: support Lenovo ideapad S205 Brazos wifi switchLee, Chun-Yi
Vaclav found a new ideapad S205 Brazos machine that used the same EC register of wireless with S205 but has different product name. So, add this machine to quirk for support wireless rfkill. Tested on Lenovo ideapad S205 Brazos Tested-by: Vaclav Mocek <vmocek@gmail.com> Acked-by: Ike Panhc <ike.pan@canonical.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26acer-wmi: fix out of input parameter size when setLee, Chun-Yi
The input parameter of set device status is different with get device status. There have volume value element for set status but don't need for get action. On Acer TravelMate 4750 creates field on volume value element even doesn't use it in DSDT. So, add this patch for separate input paramter between set device status with get status. Tested on Acer TravelMate 4750 Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26acer-wmi: Detect communication hot key numberLee, Chun-Yi
Currently we set a fixed hot key number to 0x01 for communction button, but, actually, the key number is different on each acer laptop and it was reported by SMBIOS. So, add this patch to get the communication hot key number from Acer OEM-specific SMBIOS Type AA. Tested on Acer TravelMate 4750 Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26platform/x86: Add driver for Apple gmux deviceSeth Forshee
Apple laptops with hybrid graphics have a device named gmux that controls the muxing of the LVDS panel between the GPUs as well as screen brightness. This driver adds support for the gmux device. Only backlight control is supported initially. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-26xfs: trace xfs_name strings correctlyChristoph Hellwig
Strings store in an xfs_name structure are often not NUL terminated, print them using the correct printf specifiers that make use of the string length store in the xfs_name structure. Reported-by: Brian Candler <B.Candler@pobox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-26Btrfs: remove search_start and search_end from find_free_extent and callersJosef Bacik
We have been passing nothing but (u64)-1 to find_free_extent for search_end in all of the callers, so it's completely useless, and we've always been passing 0 in as search_start, so just remove them as function arguments and move search_start into find_free_extent. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-03-26Btrfs: remove the ideal caching codeJosef Bacik
This is a relic from before we had the disk space cache and it was to make bootup times when you had btrfs as root not be so damned slow. Now that we have the disk space cache this isn't a problem anymore and really having this code casues uneeded fragmentation and complexity, so just remove it. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-03-26perf tools: Fix bug in raw sample parsingStephane Eranian
In perf_event__parse_sample(), the array variable was not incremented by the amount of data used by the raw_data. That was okay until we added PERF_SAMPLE_BRANCH_STACK which depends on the array variable pointing to the beginning of the branch stack data. But that was not the case if branch stack was combined with raw mode sampling. That led to bogus branch stack addresses and count. The bug would show up with: $ perf record -R -b foo This patch fixes the problem by correctly moving the array pointer forward for RAW samples. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120317222317.GA8803@quad [ committer note: Fix also later submitted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-26perf tools: Fix display of first level of callchainsFrederic Weisbecker
The callchain stdio mode display was written using a sorted by symbol report. In this mode we have only one callchain root per hist so we forgot to handle cases where we have multiple callchain root, as in per dso sorting for example. Fix this by handling these roots like any other branch, with the hist as the parent. Before: 1.97% libpthread-2.12.1.so | --- __libc_write create_worker bench_sched_messaging cmd_bench run_builtin main __libc_start_main | --- __libc_read create_worker bench_sched_messaging cmd_bench run_builtin main __libc_start_main After: 1.97% libpthread-2.12.1.so | |--36.97%-- __libc_write | create_worker | bench_sched_messaging | cmd_bench | run_builtin | main | __libc_start_main | |--31.47%-- __libc_read | create_worker | bench_sched_messaging | cmd_bench | run_builtin | main | __libc_start_main ... Single roots keep their entry without percentage because they have the same overhead than the hist they refer to. ie: 100% in fractal mode and the percentage of the hist in graph mode: 0.00% [k] reschedule_interrupt | --- default_idle amd_e400_idle cpu_idle start_secondary Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1332526010-15400-1-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-26ASoC: dmaengine_pcm: use dmaengine cyclic wrapperVinod Koul
commit 4a163c82 added extra parameter to device_prep_dma_cyclic this is not required if we use the wrapper over cyclic API. This is split from Alexedre's patch Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-26max17042_battery: Clean up interrupt handlingRamakrishna Pallala
Max17042 driver has dummy hardIRQ function which does nothing but waking the threaded handler. This patch removes the hardIRQ function and also modifies the interrupt type to falling edge. While we are there, change the macros to comply with the Data sheet. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26Revert "max8998_charger: Include linux/module.h just once"Anton Vorontsov
This reverts commit 0c7b5558ecc0a508bb7199776afbf18279595539. linux-next has the following patch: - - - - commit 13ae246db4a02971ef4f557af1f6d3e21d64b710 Author: Paul Gortmaker <paul.gortmaker@windriver.com> Date: Sun Jan 29 15:44:45 2012 -0500 includecheck: delete any duplicate instances of module.h - - - - It removes the other instance of include/module.h in this driver, and so both gets removed. This makes max8998 driver non-buildable. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500_fg: Fix some build warnings on x86_64Anton Vorontsov
Noticed the following warnings: CC drivers/power/ab8500_fg.o drivers/power/ab8500_fg.c: In function 'charge_full_store': drivers/power/ab8500_fg.c:2258:2: warning: format '%d' expects argument of type 'int', but argument 4 has type 'ssize_t' [-Wformat] drivers/power/ab8500_fg.c: In function ‘charge_now_store’: drivers/power/ab8500_fg.c:2280:2: warning: format '%d' expects argument of type 'int', but argument 4 has type 'ssize_t' [-Wformat] This patch fixes the issues. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042_battery: Fix CHARGE_FULL representation.MyungJoo Ham
CHARGE_FULL should represent the full capacity of the battery in uAh. The 0x10 (FullCAP) register shows the compensated full capacity in mAh * 2; e.g., reg(0x10) = 0xBB8 means that it is 1500mAh. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max8998_charger: Include linux/module.h just onceJesper Juhl
Remove the duplicate. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26power_supply: Convert i2c drivers to module_i2c_driverAxel Lin
Factor out some boilerplate code for i2c driver registration into module_i2c_driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Woogyom Kim <milo.kim@ti.com> Cc: Daniel Jeong <daniel.jeong@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Peter Edwards <sweetlilmre@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26lp8727_charger: Add MODULE_DEVICE_TABLEAxel Lin
Add MODULE_DEVICE_TABLE to setup modalias for lp8727. Allows auto modprobing. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-14 00:21:26 +0000