summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-11MAINTAINERS: rectify the INTEL IADX DRIVER entryLukas Bulwahn
Commit bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") added the INTEL IADX DRIVER entry in MAINTAINERS, which mentions include/linux/idxd.h as file entry. However, this header file was not added in this commit, nor in any later one. Hence, since then, ./scripts/get_maintainer.pl --self-test complains: warning: no file matches F: include/linux/idxd.h Drop the file entry to the non-existing file in INTEL IADX DRIVER now. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20200307205737.5829-1-lukas.bulwahn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11dmaengine: move .device_release missing log warning to debug levelVinod Koul
Dmaengine core warns the drivers registering for missing .device_release implementation. The warning is accurate for dmaengine controllers which hotplug but not for rest. So reduce this to a debug log. Link: https://lore.kernel.org/r/20200306135018.2286959-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11USB: serial: fix tty cleanup-op kernel-docJohan Hovold
The tty cleanup operation is called with a struct tty as its sole parameter. Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-11USB: serial: clean up carrier-detect helperJohan Hovold
Drop the struct tty_port pointer and rename the struct usb_serial_port pointer "port", which is the named used throughout the subsystem and incidentally also matches the kernel-doc comment. Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-11ARM: dts: imx6: phycore-som: fix arm and soc minimum voltageMarco Felsch
The current set minimum voltage of 730000µV seems to be wrong. I don't know the document which specifies that but the imx6qdl datasheets says that the minimum voltage should be 0.925V for VDD_ARM (LDO bypassed, lowest opp) and 1.15V for VDD_SOC (LDO bypassed, lowest opp). Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11cpu-topology: Fix the potential data corruptionZeng Tao
Currently there are only 10 bytes to store the cpu-topology 'name' information. Only 10 bytes copied into cluster/thread/core names. If the cluster ID exceeds 2-digit number, it will result in the data corruption, and ending up in a dead loop in the parsing routines. The same applies to the thread names with more that 3-digit number. This issue was found using the boundary tests under virtualised environment like QEMU. Let us increase the buffer to fix such potential issues. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Link: https://lore.kernel.org/r/1583294092-5929-1-git-send-email-prime.zeng@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11arch_topology: Adjust initial CPU capacities with current freqJeffy Chen
The CPU freqs are not supposed to change before cpufreq policies properly registered, meaning that they should be used to calculate the initial CPU capacities. Doing this helps choosing the best CPU during early boot, especially for the initramfs decompressing. There's no functional changes for non-clk CPU DVFS mechanism. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Link: https://lore.kernel.org/r/20200113034815.25924-1-jeffy.chen@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11drivers/base/cpu: Simplify s*nprintf() usagesTakashi Iwai
Use the simpler sprintf() instead of snprintf() or scnprintf() in a single-shot sysfs output callbacks where you are very sure that it won't go over PAGE_SIZE buffer limit. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200311080207.12046-3-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11drivers/base/cpu: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200311080207.12046-2-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11mac80211: Do not send mesh HWMP PREQ if HWMP is disabledNicolas Cavallari
When trying to transmit to an unknown destination, the mesh code would unconditionally transmit a HWMP PREQ even if HWMP is not the current path selection algorithm. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20200305140409.12204-1-cavallar@lri.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for channel switchJakub Kicinski
Add missing attribute validation for NL80211_ATTR_OPER_CLASS to the netlink policy. Fixes: 1057d35ede5d ("cfg80211: introduce TDLS channel switch commands") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-4-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for beacon report scanningJakub Kicinski
Add missing attribute validation for beacon report scanning to the netlink policy. Fixes: 1d76250bd34a ("nl80211: support beacon report scanning") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-3-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for critical protocol indicationJakub Kicinski
Add missing attribute validation for critical protocol fields to the netlink policy. Fixes: 5de17984898c ("cfg80211: introduce critical protocol indication from user-space") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-2-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11KVM: s390: Also reset registers in sync regs for initial cpu resetChristian Borntraeger
When we do the initial CPU reset we must not only clear the registers in the internal data structures but also in kvm_run sync_regs. For modern userspace sync_regs is the only place that it looks at. Fixes: 7de3f1423ff9 ("KVM: s390: Add new reset vcpu API") Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-03-11staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()Jérôme Pouiller
Access to result of ieee80211_bss_get_ie() is protected by RCU. In other hand, function hif_join() can sleep and cannot be called with RCU locked. Provide a copy of "ssidie" to hif_join() to solve this behavior. Fixes: 9ced9b593741 ("staging: wfx: simplify hif_join()") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-6-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: fix RCU usage in wfx_join_finalize()Jérôme Pouiller
Access to sta->ht_cap is protected by RCU. However, hif_set_association_mode() may sleep, so it can't be called in RCU. This patch fix this behavior by handling sta and its RCU directly from function hif_set_association_mode(). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Fixes: d00149011066 ("staging: wfx: fix RCU usage") Link: https://lore.kernel.org/r/20200310101356.182818-5-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: make warning about pending frame less scaryJérôme Pouiller
Removing station while some traffic is in progress may happen. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-4-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: fix lines ending with a comma instead of a semicolonJérôme Pouiller
Obviously introduced by mistake. Fixes: 09779276f1ba ("staging: wfx: simplify hif_start() usage") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: fix warning about freeing in-use mutex during device unregisterJérôme Pouiller
After hif_shutdown(), communication with the chip is no more possible. It the only request that never reply. Therefore, hif_cmd.lock is never unlocked. hif_shutdown() unlock itself hif_cmd.lock to avoid a potential warning during disposal of device. hif_cmd.key_renew_lock should also been unlocked for the same reason. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging/speakup: fix get_word non-space look-aheadSamuel Thibault
get_char was erroneously given the address of the pointer to the text instead of the address of the text, thus leading to random crashes when the user requests speaking a word while the current position is on a space character and say_word_ctl is not enabled. Reported-on: https://github.com/bytefire/speakup/issues/1 Reported-by: Kirk Reiser <kirk@reisers.ca> Reported-by: Janina Sajka <janina@rednote.net> Reported-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com> Reported-by: Gregory Nowak <greg@gregn.net> Reported-by: deedra waters <deedra@the-brannons.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com> Tested-by: Gregory Nowak <greg@gregn.net> Tested-by: Michael Taboada <michael@michaels.world> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@function Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: qlge: Fix WARNING: Missing a blank line after declarationsCarlos Henrique Lima Melara
Fixed WARNING: Missing a blank line after declarations in qlge_mpi.c to the following lines: WARNING: Missing a blank line after declarations FILE: drivers/staging/qlge/qlge_mpi.c:94: WARNING: Missing a blank line after declarations FILE: drivers/staging/qlge/qlge_mpi.c:240: WARNING: Missing a blank line after declarations FILE: drivers/staging/qlge/qlge_mpi.c:258: WARNING: Missing a blank line after declarations FILE: drivers/staging/qlge/qlge_mpi.c:356: WARNING: Missing a blank line after declarations FILE: drivers/staging/qlge/qlge_mpi.c:915: WARNING: Missing a blank line after declarations FILE: drivers/staging/qlge/qlge_mpi.c:1099: Signed-off-by: Carlos Henrique Lima Melara <charlesmelara@outlook.com> Link: https://lore.kernel.org/r/CP2PR80MB434086A44A1ED5BB662B9D70A8FC0@CP2PR80MB4340.lamprd80.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: rtl8188eu: fix typo s/informations/informationAndre Pinto
Fix checkpatch check: 'informations' may be misspelled - perhaps 'information'? in rtw_mlme_ext.c:1151. Signed-off-by: Andre Pinto <andrealmeidap1996@gmail.com> Link: https://lore.kernel.org/r/20200311012638.18889-1-andrealmeidap1996@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: vt6655: power.c: code reformatting for improved readabilityLourdes Pedrajas
Improve line grouping for better understanding the course of action and where every comment belongs to. Signed-off-by: Lourdes Pedrajas <lu@pplo.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Link: https://lore.kernel.org/r/3fada7fe76047ecf06d0345c0ab9216424a126f2.1583848946.git.lu@pplo.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: vt6655: power.c: Remove setting ATIM Window in PSvEnablePowerSaving()Lourdes Pedrajas
Every time priv->op_mode is not NL80211_IFTYPE_ADHOC it sets ATIM Window, but this feature it is marked TODO in 2014 and did go untouched since 2015. Signed-off-by: Lourdes Pedrajas <lu@pplo.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Link: https://lore.kernel.org/r/d9b8e434e09cb8885026a71441bf3a6919dba3da.1583848946.git.lu@pplo.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: mt7621-pci: enable clock bit for each portSergio Paracuellos
The clock related code concerns me from the very beginning because there are some set ups got from legacy driver that are not documented anywhere. According to the programming guide 0x7c is 'CPE_ROSC_SEL1' register and 0x80 is 'CPU_CPE_CN'. I do think this set up is not needed at all and the proper thing to do is just enable the clock bit for each pcie port. Hence remove useless code and do the right thing which is setting up the clock bit for each port enabled. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200310113459.30539-1-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: comedi: dt282x: remove old unused codeDeepak R Varma
There are two #if 0 blocks that have no recent history of any change. Remove those code blocks for improved readability of the code. Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com> Link: https://lore.kernel.org/r/20200310212545.GA8914@deeUbuntu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: remove unused structureKaaira Gupta
struct hif_cnf_reset is not used anywhere in wfx. It's parent file hif_api_cmd.h is imported form some other driver, hence some functions in it are not used. This is one of them. Hence remove it. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Link: https://lore.kernel.org/r/20200310142509.25632-7-kgupta@es.iitr.ac.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: remove variable declarationKaaira Gupta
int ret is uneccessarily declared and 0 assigned to it. Return o directly instead. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Link: https://lore.kernel.org/r/20200310142509.25632-6-kgupta@es.iitr.ac.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: data_tx.h: remove space after castKaaira Gupta
remove extra space after a cast in file data_tx.h Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Link: https://lore.kernel.org/r/20200310142509.25632-5-kgupta@es.iitr.ac.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: dat_tx.c: remove space after a castKaaira Gupta
remove extra spaces after casts in file data_tx.c Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Link: https://lore.kernel.org/r/20200310142509.25632-4-kgupta@es.iitr.ac.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: change 1 to boolKaaira Gupta
policies[i].uploaded is a bool. 1 is assigned to it. Change it to bool. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Link: https://lore.kernel.org/r/20200310142509.25632-3-kgupta@es.iitr.ac.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: data_rx.c: remove space after castKaaira Gupta
remove an unesseccary space after a cast in file data_rx.c Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Link: https://lore.kernel.org/r/20200310142509.25632-2-kgupta@es.iitr.ac.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11ALSA: hda/realtek: Fix pop noise on ALC225Kai-Heng Feng
Commit 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0") makes the ALC225 have pop noise on S3 resume and cold boot. So partially revert this commit for ALC225 to fix the regression. Fixes: 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0") BugLink: https://bugs.launchpad.net/bugs/1866357 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200311061328.17614-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-11cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse locationAnson Huang
i.MX8MP's market segment fuse field is bit[6:5], correct it. Fixes: 83fe39ad0a48 ("cpufreq: imx-cpufreq-dt: Add i.MX8MP support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-03-10scsi: ipr: Fix softlockup when rescanning devices in petitbootWen Xiong
When trying to rescan disks in petitboot shell, we hit the following softlockup stacktrace: Kernel panic - not syncing: System is deadlocked on memory [ 241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1 [ 241.223406] Call Trace: [ 241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable) [ 241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc [ 241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4 [ 241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8 [ 241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4 [ 241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8 [ 241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98 [ 241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c [ 241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404 [ 241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48 [ 241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4 [ 241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270 [ 241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78 [ 241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70 [ 241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264 [ 241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c [ 241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478 [ 241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c [ 241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158 [ 241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114 [ 241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c [ 241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78 [ 241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8 [ 241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60 [ 241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc [ 241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc [ 241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68 As a part of the scan process Linux will allocate and configure a scsi_device for each target to be scanned. If the device is not present, then the scsi_device is torn down. As a part of scsi_device teardown a workqueue item will be scheduled and the lockups we see are because there are 250k workqueue items to be processed. Accoding to the specification of SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters to 4. The patch fixes softlockup issue. Thanks for Oliver Halloran's help with debugging and explanation! Link: https://lore.kernel.org/r/1583510248-23672-1-git-send-email-wenxiong@linux.vnet.ibm.com Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-10Merge branch 's390-qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2020-03-10 This fixes three minor issues: 1) a setup parameter gets cleared unnecessarily when the HW config changes, 2) insufficient error handling when initially filling the RX ring, and 3) a rarely used worker that needs to be cancelled during tear down. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: cancel RX reclaim work earlierJulian Wiedmann
When qeth's napi poll code fails to refill an entirely empty RX ring, it kicks off buffer_reclaim_work to try again later. Make sure that this worker is cancelled when setting the qeth device offline. Otherwise a RX refill action can unexpectedly end up running concurrently to bigger re-configurations (eg. resizing the buffer pool), without any locking. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: handle error when backing RX bufferJulian Wiedmann
qeth_init_qdio_queues() fills the RX ring with an initial set of RX buffers. If qeth_init_input_buffer() fails to back one of the RX buffers with memory, we need to bail out and report the error. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: don't reset default_out_queueJulian Wiedmann
When an OSA device in prio-queue setup is reduced to 1 TX queue due to HW restrictions, we reset its the default_out_queue to 0. In the old code this was needed so that qeth_get_priority_queue() gets the queue selection right. But with proper multiqueue support we already reduced dev->real_num_tx_queues to 1, and so the stack puts all traffic on txq 0 without even calling .ndo_select_queue. Thus we can preserve the user's configuration, and apply it if the OSA device later re-gains support for multiple TX queues. Fixes: 73dc2daf110f ("s390/qeth: add TX multiqueue support for OSA devices") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10scsi: ufs: Fix possible unclocked access to auto hibern8 timer registerCan Guo
Before access auto hibner8 timer register, make sure power and clock are properly configured to avoid unclocked register access. Link: https://lore.kernel.org/r/1583398391-14273-1-git-send-email-cang@codeaurora.org Fixes: ba7af5ec5126 ("scsi: ufs: export ufshcd_auto_hibern8_update for vendor usage") Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-10Merge branch 'MACSec-bugfixes-related-to-MAC-address-change'David S. Miller
Igor Russkikh says: ==================== MACSec bugfixes related to MAC address change We found out that there's an issue in MACSec code when the MAC address is changed. Both s/w and offloaded implementations don't update SCI when the MAC address changes at the moment, but they should do so, because SCI contains MAC in its first 6 octets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: macsec: invoke mdo_upd_secy callback when mac address changedDmitry Bogdanov
Notify the offload engine about MAC address change to reconfigure it accordingly. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: macsec: update SCI upon MAC address change.Dmitry Bogdanov
SCI should be updated, because it contains MAC in its first 6 octets. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ibmvnic: Do not process device remove during device resetJuliet Kim
The ibmvnic driver does not check the device state when the device is removed. If the device is removed while a device reset is being processed, the remove may free structures needed by the reset, causing an oops. Fix this by checking the device state before processing device remove. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net/smc: cancel event worker during device removalKarsten Graul
During IB device removal, cancel the event worker before the device structure is freed. Fixes: a4cf0443c414 ("smc: introduce SMC as an IB-client") Reported-by: syzbot+b297c6825752e7a07272@syzkaller.appspotmail.com Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interfaceHangbin Liu
Rafał found an issue that for non-Ethernet interface, if we down and up frequently, the memory will be consumed slowly. The reason is we add allnodes/allrouters addressed in multicast list in ipv6_add_dev(). When link down, we call ipv6_mc_down(), store all multicast addresses via mld_add_delrec(). But when link up, we don't call ipv6_mc_up() for non-Ethernet interface to remove the addresses. This makes idev->mc_tomb getting bigger and bigger. The call stack looks like: addrconf_notify(NETDEV_REGISTER) ipv6_add_dev ipv6_dev_mc_inc(ff01::1) ipv6_dev_mc_inc(ff02::1) ipv6_dev_mc_inc(ff02::2) addrconf_notify(NETDEV_UP) addrconf_dev_config /* Alas, we support only Ethernet autoconfiguration. */ return; addrconf_notify(NETDEV_DOWN) addrconf_ifdown ipv6_mc_down igmp6_group_dropped(ff02::2) mld_add_delrec(ff02::2) igmp6_group_dropped(ff02::1) igmp6_group_dropped(ff01::1) After investigating, I can't found a rule to disable multicast on non-Ethernet interface. In RFC2460, the link could be Ethernet, PPP, ATM, tunnels, etc. In IPv4, it doesn't check the dev type when calls ip_mc_up() in inetdev_event(). Even for IPv6, we don't check the dev type and call ipv6_add_dev(), ipv6_dev_mc_inc() after register device. So I think it's OK to fix this memory consumer by calling ipv6_mc_up() for non-Ethernet interface. v2: Also check IFF_MULTICAST flag to make sure the interface supports multicast Reported-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Rafał Miłecki <zajec5@gmail.com> Fixes: 74235a25c673 ("[IPV6] addrconf: Fix IPv6 on tuntap tunnels") Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge tag 'clang-format-for-linus-v5.6-rc6' of git://github.com/ojeda/linuxLinus Torvalds
Pull clang-format update from Miguel Ojeda: "Another update for the .clang-format macro list It has been a while since the last time I sent one!" * tag 'clang-format-for-linus-v5.6-rc6' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list
2020-03-10net: memcg: late association of sock to memcgShakeel Butt
If a TCP socket is allocated in IRQ context or cloned from unassociated (i.e. not associated to a memcg) in IRQ context then it will remain unassociated for its whole life. Almost half of the TCPs created on the system are created in IRQ context, so, memory used by such sockets will not be accounted by the memcg. This issue is more widespread in cgroup v1 where network memory accounting is opt-in but it can happen in cgroup v2 if the source socket for the cloning was created in root memcg. To fix the issue, just do the association of the sockets at the accept() time in the process context and then force charge the memory buffer already used and reserved by the socket. Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10cgroup: memcg: net: do not associate sock with unrelated cgroupShakeel Butt
We are testing network memory accounting in our setup and noticed inconsistent network memory usage and often unrelated cgroups network usage correlates with testing workload. On further inspection, it seems like mem_cgroup_sk_alloc() and cgroup_sk_alloc() are broken in irq context specially for cgroup v1. mem_cgroup_sk_alloc() and cgroup_sk_alloc() can be called in irq context and kind of assumes that this can only happen from sk_clone_lock() and the source sock object has already associated cgroup. However in cgroup v1, where network memory accounting is opt-in, the source sock can be unassociated with any cgroup and the new cloned sock can get associated with unrelated interrupted cgroup. Cgroup v2 can also suffer if the source sock object was created by process in the root cgroup or if sk_alloc() is called in irq context. The fix is to just do nothing in interrupt. WARNING: Please note that about half of the TCP sockets are allocated from the IRQ context, so, memory used by such sockets will not be accouted by the memcg. The stack trace of mem_cgroup_sk_alloc() from IRQ-context: CPU: 70 PID: 12720 Comm: ssh Tainted: 5.6.0-smp-DEV #1 Hardware name: ... Call Trace: <IRQ> dump_stack+0x57/0x75 mem_cgroup_sk_alloc+0xe9/0xf0 sk_clone_lock+0x2a7/0x420 inet_csk_clone_lock+0x1b/0x110 tcp_create_openreq_child+0x23/0x3b0 tcp_v6_syn_recv_sock+0x88/0x730 tcp_check_req+0x429/0x560 tcp_v6_rcv+0x72d/0xa40 ip6_protocol_deliver_rcu+0xc9/0x400 ip6_input+0x44/0xd0 ? ip6_protocol_deliver_rcu+0x400/0x400 ip6_rcv_finish+0x71/0x80 ipv6_rcv+0x5b/0xe0 ? ip6_sublist_rcv+0x2e0/0x2e0 process_backlog+0x108/0x1e0 net_rx_action+0x26b/0x460 __do_softirq+0x104/0x2a6 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.19+0x40/0x50 __local_bh_enable_ip+0x51/0x60 ip6_finish_output2+0x23d/0x520 ? ip6table_mangle_hook+0x55/0x160 __ip6_finish_output+0xa1/0x100 ip6_finish_output+0x30/0xd0 ip6_output+0x73/0x120 ? __ip6_finish_output+0x100/0x100 ip6_xmit+0x2e3/0x600 ? ipv6_anycast_cleanup+0x50/0x50 ? inet6_csk_route_socket+0x136/0x1e0 ? skb_free_head+0x1e/0x30 inet6_csk_xmit+0x95/0xf0 __tcp_transmit_skb+0x5b4/0xb20 __tcp_send_ack.part.60+0xa3/0x110 tcp_send_ack+0x1d/0x20 tcp_rcv_state_process+0xe64/0xe80 ? tcp_v6_connect+0x5d1/0x5f0 tcp_v6_do_rcv+0x1b1/0x3f0 ? tcp_v6_do_rcv+0x1b1/0x3f0 __release_sock+0x7f/0xd0 release_sock+0x30/0xa0 __inet_stream_connect+0x1c3/0x3b0 ? prepare_to_wait+0xb0/0xb0 inet_stream_connect+0x3b/0x60 __sys_connect+0x101/0x120 ? __sys_getsockopt+0x11b/0x140 __x64_sys_connect+0x1a/0x20 do_syscall_64+0x51/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The stack trace of mem_cgroup_sk_alloc() from IRQ-context: Fixes: 2d7580738345 ("mm: memcontrol: consolidate cgroup socket tracking") Fixes: d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets") Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge tag 'auxdisplay-for-linus-v5.6-rc6' of git://github.com/ojeda/linuxLinus Torvalds
Pull auxdisplay updates from Miguel Ojeda: "A few minor auxdisplay improvements: - charlcd: replace zero-length array with flexible-array member (kernel-wide cleanup by Gustavo A. R. Silva) - img-ascii-lcd: convert to devm_platform_ioremap_resource (Yangtao Li) - Fix Kconfig indentation (Krzysztof Kozlowski) * tag 'auxdisplay-for-linus-v5.6-rc6' of git://github.com/ojeda/linux: auxdisplay: charlcd: replace zero-length array with flexible-array member auxdisplay: img-ascii-lcd: convert to devm_platform_ioremap_resource auxdisplay: Fix Kconfig indentation
generated by cgit (git 2.34.1) at 2025-09-23 13:01:20 +0000