| Age | Commit message (Collapse) | Author |
|---|
|
A ticket was not released after a call of the function
"rxkad_decrypt_ticket" failed. Thus replace the jump target
"temporary_error_free_resp" by "temporary_error_free_ticket".
Fixes: 8c2f826dc3631 ("rxrpc: Don't put crypto buffers on the stack")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Markus Elfring <Markus.Elfring@web.de>
|
|
Fix a warning due to an uninitialised variable.
le included from ../fs/afs/fs_probe.c:11:
../fs/afs/fs_probe.c: In function 'afs_fileserver_probe_result':
../fs/afs/internal.h:1453:2: warning: 'rtt_us' may be used uninitialized in this function [-Wmaybe-uninitialized]
1453 | printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
| ^~~~~~
../fs/afs/fs_probe.c:35:15: note: 'rtt_us' was declared here
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
In cas_init_one(), "pdev" is requested by "pci_request_regions", but it
was not released after a call of the function “pci_write_config_byte”
failed. Thus replace the jump target “err_write_cacheline” by
"err_out_free_res".
Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ocelot_set_ageing_time has 2 callers:
- felix_set_ageing_time: from drivers/net/dsa/ocelot/felix.c
- ocelot_port_attr_ageing_set: from drivers/net/ethernet/mscc/ocelot.c
The issue described in the fixed commit below actually happened for the
felix_set_ageing_time code path only, since ocelot_port_attr_ageing_set
was already dividing by 1000. So to make both paths symmetrical (and to
fix addresses getting aged way too fast on Ocelot), stop dividing by
1000 at caller side altogether.
Fixes: c0d7eccbc761 ("net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to r8168 vendor driver DASHv3 chips like RTL8168fp/RTL8117
need a special addressing for OCP access.
Fix is compile-tested only due to missing test hardware.
Fixes: 1287723aa139 ("r8169: add support for RTL8117")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
mlxsw: Various fixes
Patch #1 from Jiri fixes a use-after-free discovered while fuzzing mlxsw
/ devlink with syzkaller.
Patch #2 from Amit works around a limitation in new versions of arping,
which is used in several selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Starting from iputils s20190709 (used in Fedora 31), arping does not
support timeout being specified as a decimal:
$ arping -c 1 -I swp1 -b 192.0.2.66 -q -w 0.1
arping: invalid argument: '0.1'
Previously, such timeouts were rounded to an integer.
Fix this by specifying the timeout as an integer.
Fixes: a5ee171d087e ("selftests: mlxsw: qos_mc_aware: Add a test for UC awareness")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fails
In case of reload fail, the mlxsw_sp->ports contains a pointer to a
freed memory (either by reload_down() or reload_up() error path).
Fix this by initializing the pointer to NULL and checking it before
dereferencing in split/unsplit/type_set callpaths.
Fixes: 24cc68ad6c46 ("mlxsw: core: Add support for reload")
Reported-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ipq806x_gmac_probe() function enables the PTP clock but not the
appropriate interface clocks. This means that if the bootloader hasn't
done so attempting to bring up the interface will fail with an error
like:
[ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma
[ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed
[ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed
This patch, a slightly cleaned up version of one posted by Sergey
Sergeev in:
https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257
correctly enables the clock; we have already configured the source just
before this.
Tested on a MikroTik RB3011.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
netdevsim: Two small fixes
Fix two bugs observed while analyzing regression failures.
Patch #1 fixes a bug where sometimes the drop counter of a packet trap
policer would not increase.
Patch #2 adds a missing initialization of a variable in a related
selftest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable is used by log_test() to check if the test case completely
successfully or not. In case it is not initialized at the start of a
test case, it is possible for the test case to fail despite not
encountering any errors.
Example:
```
...
TEST: Trap group statistics [ OK ]
TEST: Trap policer [FAIL]
Policer drop counter was not incremented
TEST: Trap policer binding [FAIL]
Policer drop counter was not incremented
```
Failure of trap_policer_test() caused trap_policer_bind_test() to fail
as well.
Fix by adding missing initialization of the variable.
Fixes: 5fbff58e27a1 ("selftests: netdevsim: Add test cases for devlink-trap policers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case the policer drop counter is retrieved when the jiffies value is
a multiple of 64, the counter will not be incremented.
This randomly breaks a selftest [1] the reads the counter twice and
checks that it was incremented:
```
TEST: Trap policer [FAIL]
Policer drop counter was not incremented
```
Fix by always incrementing the counter by 1.
[1] tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh
Fixes: ad188458d012 ("netdevsim: Add devlink-trap policer support")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix retransmission timeout and ACK discard
Here are a couple of fixes and an extra tracepoint for AF_RXRPC:
(1) Calculate the RTO pretty much as TCP does, rather than making
something up, including an initial 4s timeout (which causes return
probes from the fileserver to fail if a packet goes missing), and add
backoff.
(2) Fix the discarding of out-of-order received ACKs. We mustn't let the
hard-ACK point regress, nor do we want to do unnecessary
retransmission because the soft-ACK list regresses. This is not
trivial, however, due to some loose wording in various old protocol
specs, the ACK field that should be used for this sometimes has the
wrong information in it.
(3) Add a tracepoint to log a discarded ACK.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ugeth_quiesce/activate are used to halt the controller when there is a
link change that requires to reconfigure the mac.
The previous implementation called netif_device_detach(). This however
causes the initial activation of the netdevice to fail precisely because
it's detached. For details, see [1].
A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev
However, the check introduced in the above commit is correct and shall be
kept.
The netif_device_detach() is thus replaced with
netif_tx_stop_all_queues() that prevents any tranmission. This allows to
perform mac config change required by the link change, without detaching
the corresponding netdevice and thus not preventing its initial
activation.
[1] https://lists.openwall.net/netdev/2020/01/08/201
Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
socket is closed
Commit bdf6fa52f01b ("sctp: handle association restarts when the
socket is closed.") starts shutdown when an association is restarted,
if in SHUTDOWN-PENDING state and the socket is closed. However, the
rationale stated in that commit applies also when in SHUTDOWN-SENT
state - we don't want to move an association to ESTABLISHED state when
the socket has been closed, because that results in an association
that is unreachable from user space.
The problem scenario:
1. Client crashes and/or restarts.
2. Server (using one-to-one socket) calls close(). SHUTDOWN is lost.
3. Client reconnects using the same addresses and ports.
4. Server's association is restarted. The association and the socket
move to ESTABLISHED state, even though the server process has
closed its descriptor.
Also, after step 4 when the server process exits, some resources are
leaked in an attempt to release the underlying inet sock structure in
ESTABLISHED state:
IPv4: Attempt to release TCP socket in state 1 00000000377288c7
Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if
an association is restarted in SHUTDOWN-SENT state and the socket is
closed, then start shutdown and don't move the association or the
socket to ESTABLISHED state.
Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.")
Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dst_cache_get() documents it must be used with BH disabled.
sysbot reported :
BUG: using smp_processor_id() in preemptible [00000000] code: /21697
caller is dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68
CPU: 0 PID: 21697 Comm: Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
check_preemption_disabled lib/smp_processor_id.c:47 [inline]
debug_smp_processor_id.cold+0x88/0x9b lib/smp_processor_id.c:57
dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68
tipc_udp_xmit.isra.0+0xb9/0xad0 net/tipc/udp_media.c:164
tipc_udp_send_msg+0x3e6/0x490 net/tipc/udp_media.c:244
tipc_bearer_xmit_skb+0x1de/0x3f0 net/tipc/bearer.c:526
tipc_enable_bearer+0xb2f/0xd60 net/tipc/bearer.c:331
__tipc_nl_bearer_enable+0x2bf/0x390 net/tipc/bearer.c:995
tipc_nl_bearer_enable+0x1e/0x30 net/tipc/bearer.c:1003
genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362
___sys_sendmsg+0x100/0x170 net/socket.c:2416
__sys_sendmsg+0xec/0x1b0 net/socket.c:2449
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Fixes: e9c1a793210f ("tipc: add dst_cache support for udp media")
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When rxhash is enabled on any ethernet port except the first in each CP
block, traffic flow is prevented. The analysis is below:
I've been investigating this afternoon, and what I've found, comparing
a kernel without 895586d5dc32 and with 895586d5dc32 applied is:
- The table programmed into the hardware via mvpp22_rss_fill_table()
appears to be identical with or without the commit.
- When rxhash is enabled on eth2, mvpp2_rss_port_c2_enable() reports
that c2.attr[0] and c2.attr[2] are written back containing:
- with 895586d5dc32, failing: 00200000 40000000
- without 895586d5dc32, working: 04000000 40000000
- When disabling rxhash, c2.attr[0] and c2.attr[2] are written back as:
04000000 00000000
The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the
first value is the queue number, which comprises two fields. The high
5 bits are 24:29 and the low three are 21:23 inclusive. This comes
from:
c2.attr[0] = MVPP22_CLS_C2_ATTR0_QHIGH(qh) |
MVPP22_CLS_C2_ATTR0_QLOW(ql);
So, the working case gives eth2 a queue id of 4.0, or 32 as per
port->first_rxq, and the non-working case a queue id of 0.1, or 1.
The allocation of queue IDs seems to be in mvpp2_port_probe():
if (priv->hw_version == MVPP21)
port->first_rxq = port->id * port->nrxqs;
else
port->first_rxq = port->id * priv->max_port_rxqs;
Where:
if (priv->hw_version == MVPP21)
priv->max_port_rxqs = 8;
else
priv->max_port_rxqs = 32;
Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1
(eth2) be 32. It seems the idea is that the first 32 queues belong to
port 0, the second 32 queues belong to port 1, etc.
mvpp2_rss_port_c2_enable() gets the queue number from it's parameter,
'ctx', which comes from mvpp22_rss_ctx(port, 0). This returns
port->rss_ctx[0].
mvpp22_rss_context_create() is responsible for allocating that, which
it does by looking for an unallocated priv->rss_tables[] pointer. This
table is shared amongst all ports on the CP silicon.
When we write the tables in mvpp22_rss_fill_table(), the RSS table
entry is defined by:
u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) |
MVPP22_RSS_INDEX_TABLE_ENTRY(i);
where rss_ctx is the context ID (queue number) and i is the index in
the table.
If we look at what is written:
- The first table to be written has "sel" values of 00000000..0000001f,
containing values 0..3. This appears to be for eth1. This is table 0,
RX queue number 0.
- The second table has "sel" values of 00000100..0000011f, and appears
to be for eth2. These contain values 0x20..0x23. This is table 1,
RX queue number 0.
- The third table has "sel" values of 00000200..0000021f, and appears
to be for eth3. These contain values 0x40..0x43. This is table 2,
RX queue number 0.
How do queue numbers translate to the RSS table? There is another
table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE field
of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE
register. Before 895586d5dc32, it was:
mvpp2_write(priv, MVPP22_RSS_INDEX,
MVPP22_RSS_INDEX_QUEUE(port->first_rxq));
mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE,
MVPP22_RSS_TABLE_POINTER(port->id));
and after:
mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(ctx));
mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(ctx));
Before the commit, for eth2, that would've contained '32' for the
index and '1' for the table pointer - mapping queue 32 to table 1.
Remember that this is queue-high.queue-low of 4.0.
After the commit, we appear to map queue 1 to table 1. That again
looks fine on the face of it.
Section 9.3.1 of the A8040 manual seems indicate the reason that the
queue number is separated. queue-low seems to always come from the
classifier, whereas queue-high can be from the ingress physical port
number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG.
We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high
comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to
be where our bug comes from.
mvpp2_cls_oversize_rxq_set() sets this up as:
mvpp2_write(port->priv, MVPP2_CLS_SWFWD_P2HQ_REG(port->id),
(port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));
val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG);
val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);
Setting the MVPP2_CLS_SWFWD_PCTRL_MASK bit means that the queue-high
for eth2 is _always_ 4, so only queues 32 through 39 inclusive are
available to eth2. Yet, we're trying to tell the classifier to set
queue-high, which will be ignored, to zero. Hence, the queue-high
field (MVPP22_CLS_C2_ATTR0_QHIGH()) from the classifier will be
ignored.
This means we end up directing traffic from eth2 not to queue 1, but
to queue 33, and then we tell it to look up queue 33 in the RSS table.
However, RSS table has not been programmed for queue 33, and so it ends
up (presumably) dropping the packets.
It seems that mvpp22_rss_context_create() doesn't take account of the
fact that the upper 5 bits of the queue ID can't actually be changed
due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems that
mvpp2_cls_oversize_rxq_set() has been missed in this commit. Either
way, these two functions mutually disagree with what queue number
should be used.
Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU
validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is used
for over-sized packets attempting to egress through this port. With
the classifier having had RSS enabled and directing eth2 traffic to
queue 1, we may still have packets appearing on queue 32 for this port.
However, the only way we may end up with over-sized packets attempting
to egress through eth2 - is if the A8040 forwards frames between its
ports. From what I can see, we don't support that feature, and the
kernel restricts the egress packet size to the MTU. In any case, if we
were to attempt to transmit an oversized packet, we have no support in
the kernel to deal with that appearing in the port's receive queue.
So, this patch attempts to solve the issue by clearing the
MVPP2_CLS_SWFWD_PCTRL_MASK() bit, allowing MVPP22_CLS_C2_ATTR0_QHIGH()
from the classifier to define the queue-high field of the queue number.
My testing seems to confirm my findings above - clearing this bit
means that if I enable rxhash on eth2, the interface can then pass
traffic, as we are now directing traffic to RX queue 1 rather than
queue 33. Traffic still seems to work with rxhash off as well.
Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-05-22
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 5 files changed, 69 insertions(+), 11 deletions(-).
The main changes are:
1) Fix to reject mmap()'ing read-only array maps as writable since BPF verifier
relies on such map content to be frozen, from Andrii Nakryiko.
2) Fix breaking audit from secid_to_secctx() LSM hook by avoiding to use
call_int_hook() since this hook is not stackable, from KP Singh.
3) Fix BPF flow dissector program ref leak on netns cleanup, from Jakub Sitnicki.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The caller of devm_ioremap_resource(), either accidentally
or by wrong assumption, is writing back derived resource data
to global static resource initialization tables that should
have been constant. Meaning that after it computes the final
physical start address it saves the address for no reason
in the static tables. This doesn't affect the first driver
probing after reboot, but it breaks consecutive driver reloads
(i.e. driver unbind & bind) because the initialization tables
no longer have the correct initial values. So the next probe()
will map the device registers to wrong physical addresses,
causing ARM SError async exceptions.
This patch fixes all of the above.
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is some ambiguity in the RFC as to whether the ADD_ADDR HMAC is
the rightmost 64 bits of the entire hash or of the leftmost 160 bits
of the hash. The intention, as clarified with the author of the RFC,
is the entire hash.
This change returns the entire hash from
mptcp_crypto_hmac_sha (instead of only the first 160 bits), and moves
any truncation/selection operation on the hash to the caller.
Fixes: 12555a2d97e5 ("mptcp: use rightmost 64 bits in ADD_ADDR HMAC")
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Todd Malsbary <todd.malsbary@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the delay used is long enough the spi_delay_exec() will use a sleeping
function to implement it. Add a might_sleep() here to help avoid callers
using this from an atomic context and running into problems at runtime on
other systems.
Suggested-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200522155005.46099-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On some architectures like ppc64le and aarch64, compiling with
-Wformat=1 will throw the following warnings:
In file included from drivers/gpu/drm/drm_vblank.c:33:
drivers/gpu/drm/drm_vblank.c: In function 'drm_update_vblank_count':
drivers/gpu/drm/drm_vblank.c:273:16: warning: format '%llu' expects
argument of type 'long long unsigned int', but argument 4 has type
'long int' [-Wformat=]
DRM_DEBUG_VBL("updating vblank count on crtc %u:"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/drm/drm_print.h:407:22: note: in definition of macro
'DRM_DEBUG_VBL'
drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__)
^~~
drivers/gpu/drm/drm_vblank.c:274:22: note: format string is defined here
" current=%llu, diff=%u, hw=%u hw_last=%u\n",
~~~^
%lu
So, fix that with a typecast.
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521204647.2578479-1-lyude@redhat.com
|
|
The core mask display is wrong in some cases. This is showing more
cpus than the mask has. This is because mask is 64 bit but it used
with BIT() macro to get the presence of CPU which doesn't support
unsigned long long. Added a new macro for BIT_ULL and use that
to get the presence of a CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Increase CPU count so that more than 64 is supported in one request.
For example:
sudo ./intel-speed-select -d --cpu 0-66 core-power assoc -clos 0
The above command stops at 63. With this change, it can support more
CPU numbers from 0-255.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
The 'intel-speed-select -f json perf-profile get-lock-status' command
outputs the package, die, and cpu data as separate fields.
ex)
"package-0": {
"die-0": {
"cpu-0": {
Commit 74062363f855 ("tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json") prettied this output so that it is a single line for
some json output commands and the same should be done for other commands.
Output package, die, and cpu info in a single line when using json output.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Pull io_uring fixes from Jens Axboe:
"A small collection of small fixes that should go into this release:
- Two fixes for async request preparation (Pavel)
- Busy clear fix for SQPOLL (Xiaoguang)
- Don't use kiocb->private for O_DIRECT buf index, some file systems
use it (Bijan)
- Kill dead check in io_splice()
- Ensure sqo_wait is initialized early
- Cancel task_work if we fail adding to original process
- Only add (IO)pollable requests to iopoll list, fixing a regression
in this merge window"
* tag 'io_uring-5.7-2020-05-22' of git://git.kernel.dk/linux-block:
io_uring: reset -EBUSY error when io sq thread is waken up
io_uring: don't add non-IO requests to iopoll pending list
io_uring: don't use kiocb.private to store buf_index
io_uring: cancel work if task_work_add() fails
io_uring: remove dead check in io_splice()
io_uring: fix FORCE_ASYNC req preparation
io_uring: don't prepare DRAIN reqs twice
io_uring: initialize ctx->sqo_wait earlier
|
|
Pull block fixes from Jens Axboe:
"Two fixes for null_blk zone mode"
* tag 'block-5.7-2020-05-22' of git://git.kernel.dk/linux-block:
null_blk: don't allow discard for zoned mode
null_blk: return error for invalid zone size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes:
- Another !MMU build fix that was a straggler from last week
- A fix to use the "register" keyword for the GP global register
variable"
* tag 'riscv-for-linus-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: gp_in_global needs register keyword
riscv: Fix print_vm_layout build error if NOMMU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
"- fix EFI framebuffer earlycon for wide fonts
- avoid filling screen_info with garbage if the EFI framebuffer is not
available
- fix a potential host tool build error due to a symbol clash on x86
- work around a EFI firmware bug regarding the binary format of the TPM
final events table
- fix a missing memory free by reworking the E820 table sizing routine to
not do the allocation in the first place
- add CPER parsing for firmware errors"
|
|
Normally, show_trace_log_lvl() scans the stack, looking for text
addresses to print. In parallel, it unwinds the stack with
unwind_next_frame(). If the stack address matches the pointer returned
by unwind_get_return_address_ptr() for the current frame, the text
address is printed normally without a question mark. Otherwise it's
considered a breadcrumb (potentially from a previous call path) and it's
printed with a question mark to indicate that the address is unreliable
and typically can be ignored.
Since the following commit:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
... for inactive tasks, show_trace_log_lvl() prints *only* unreliable
addresses (prepended with '?').
That happens because, for the first frame of an inactive task,
unwind_get_return_address_ptr() returns the wrong return address
pointer: one word *below* the task stack pointer. show_trace_log_lvl()
starts scanning at the stack pointer itself, so it never finds the first
'reliable' address, causing only guesses to being printed.
The first frame of an inactive task isn't a normal stack frame. It's
actually just an instance of 'struct inactive_task_frame' which is left
behind by __switch_to_asm(). Now that this inactive frame is actually
exposed to callers, fix unwind_get_return_address_ptr() to interpret it
properly.
Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200522135435.vbxs7umku5pyrdbk@treble
|
|
This fixes an intermittent bug where a root PD clear operation still in
progress could overwrite a PDE update done by the CPU, resulting in a
VM fault.
Fixes: 108b4d928c03 ("drm/amd/amdgpu: Update VM function pointer")
Reported-by: Jay Cornwall <Jay.Cornwall@amd.com>
Tested-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Previously we used the s3 codepath for gpu reset. This can lead to issues in
certain case where we end of waiting for fences which will never come (because
parts of the hw are off due to gpu reset) and we end up waiting forever causing
a deadlock.
[How]
Handle GPU reset separately from normal s3 case. We essentially need to redo
everything we do in s3, but avoid any drm calls.
For GPU reset case
suspend:
-Acquire DC lock
-Cache current dc_state
-Commit 0 stream/planes to dc (this puts dc into a state where it can be
powered off)
-Disable interrupts
resume
-Edit cached state to force full update
-Commit cached state from suspend
-Build stream and plane updates from the cached state
-Commit stream/plane updates
-Enable interrupts
-Release DC lock
v2:
-Formatting
-Release dc_state
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add some APU flags to simplify handling of different APU
variants. It's easier to understand the special cases
if we use names flags rather than checking device ids and
silicon revisions.
v2: rebase on latest code
Acked-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Problem description]
1. Boot up picasso platform, launches desktop, Don't do anything (APU enter into "gfxoff" state)
2. Remote login to platform using SSH, then type the command line:
sudo su -c "echo manual > /sys/class/drm/card0/device/power_dpm_force_performance_level"
sudo su -c "echo 2 > /sys/class/drm/card0/device/pp_dpm_sclk" (fix SCLK to 1400MHz)
3. Move the mouse around in Window
4. Phenomenon : The screen frozen
Tester will switch sclk level during glmark2 run time.
APU will enter "gfxoff" state intermittently during glmark2 run time.
The system got hanged if fix GFXCLK to 1400MHz when APU is in "gfxoff"
state.
[Debug]
1. Fix SCLK to X MHz
1400: screen frozen, screen black, then OS will reboot.
1300: screen frozen.
1200: screen frozen, screen black.
1100: screen frozen, screen black, then OS will reboot.
1000: screen frozen, screen black.
900: screen frozen, screen black, then OS will reboot.
800: Situation Nomal, issue disappear.
700: Situation Nomal, issue disappear.
2. SBIOS setting: AMD CBS --> SMU Debug Options -->SMU Debug --> "GFX DLDO Psm Margin Control":
50 : Situation Nomal, issue disappear.
45 : Situation Nomal, issue disappear.
40 : Situation Nomal, issue disappear.
35 : Situation Nomal, issue disappear.
30 : screen black.
25 : screen frozen, then blurred screen.
20 : screen frozen.
15 : screen black.
10 : screen frozen.
5 : screen frozen, then blurred screen.
3. Disable GFXOFF feature
Situation Nomal, issue disappear.
[Why]
Through a period of time debugging with Sys Eng team and SMU team, Sys
Eng team said this is voltage/frequency marginal issue not a F/W or H/W
bug. This experiment proves that default targetPsm [for f=1400MHz] is
not sufficient when GFXOFF is enabled on Picasso.
SMU team think it is an odd test conditions to force sclk="1400MHz" when
GPU is in "gfxoff" state，then wake up the GFX. SCLK should be in the
"lowest frequency" when gfxoff.
[How]
Disable gfxoff when setting manual mode.
Enable gfxoff when setting other mode(exiting manual mode) again.
By the way, from the user point of view, now that user switch to manual
mode and force SCLK Frequency, he don't want SCLK be controlled by
workload.It becomes meaningless to "switch to manual mode" if APU enter "gfxoff"
due to lack of workload at this point.
Tips: Same issue observed on Raven.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix typos that prevented them from showing up.
v2: switch other files in addition to pp_clk_voltage
Fixes: 4e01847c38f7a5 ("drm/amdgpu: optimize amdgpu device attribute code")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1150
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
|
|
We need to get the silicon revision id before we parse
the firmware in order to load the correct gpu info firmware
for raven2 variants.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1103
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move it into the fw_info function since it's logically part
of the same functionality.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Bring the PTRACE_SYSEMU semantics in line with the man page.
- Annotate variable assignment in get_user() with the type to avoid
sparse warnings.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add get_user() type annotation on the !access_ok() path
arm64: Fix PTRACE_SYSEMU semantics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes: the only significant one is a slight
improvement for PCM running position update with no-period-elapsed
case while the rest are HD-audio fixups and ice1712 model quirk"
* tag 'sound-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Add more fixup entries for Clevo machines
ALSA: iec1712: Initialize STDSP24 properly when using the model=staudio option
ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Xtreme
ALSA: pcm: fix incorrect hw_base increase
|
|
The documentation provided by kobject_init_and_add() clearly spells out
the need to call kobject_put() on the kobject if an error is returned.
Add this missing call to the error path.
Cc: <stable@vger.kernel.org>
Reported-by: 亿一 <teroincn@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Sparse reports "Using plain integer as NULL pointer" when the arm64
__get_user_error() assigns 0 to a pointer type. Use proper type
annotation.
Signed-of-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: kbuild test robot <lkp@intel.com>
Link: http://lkml.kernel.org/r/20200522142321.GP23230@ZenIV.linux.org.uk
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- a revert of a recent change to the PTE bits for 32-bit BookS, which
broke swap.
- a "fix" to disable STRICT_KERNEL_RWX for 64-bit in Kconfig, as it's
causing crashes for some people.
Thanks to Christophe Leroy and Rui Salvaterra.
* tag 'powerpc-5.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable STRICT_KERNEL_RWX
Revert "powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits."
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
Also, the following issue shows up due to the flexible-array member
having incomplete type[4]:
drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_bios_measurements_start’:
drivers/char/tpm/eventlog/tpm2.c:54:46: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’}
54 | size = sizeof(struct tcg_pcr_event) - sizeof(event_header->event)
| ^
drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_bios_measurements_next’:
drivers/char/tpm/eventlog/tpm2.c:102:10: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’}
102 | sizeof(event_header->event) + event_header->event_size;
| ^
drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_binary_bios_measurements_show’:
drivers/char/tpm/eventlog/tpm2.c:140:10: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’}
140 | sizeof(event_header->event) + event_header->event_size;
| ^
scripts/Makefile.build:266: recipe for target 'drivers/char/tpm/eventlog/tpm2.o' failed
make[3]: *** [drivers/char/tpm/eventlog/tpm2.o] Error 1
As mentioned above: "Flexible array members have incomplete type, and
so the sizeof operator may not be applied. As a quirk of the original
implementation of zero-length arrays, sizeof evaluates to zero."[1] As
in "sizeof(event_header->event) always evaluated to 0, so removing it
has no effect".
Lastly, make use of the struct_size() helper to deal with the
flexible array member and its host structure.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
[4] https://github.com/KSPP/linux/issues/43
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
There is export_uuid() function which exports uuid_t to the u8 array.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Now that we removed the memory limit for the allocation of the
command line, there is no longer a need to use the page based
allocator so switch to a pool allocation instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Check if the command line passed in is larger than COMMAND_LINE_SIZE,
and truncate it to the last full argument if so.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200521002921.69650-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Both of these never can be NULL for a live block device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The argument isn't used by any caller, and drivers don't fill out
bi_sector for flush requests either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The debugfs qm_regs file is already in the qm directory, so no qm_ prefix
is required.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add dump information of SQC/CQC/EQC/AEQC/SQE/CQE/EQE/AEQE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
