summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-12-09wifi: brcmfmac: fix brcmf_vif_clear_mgmt_ies when stopping APRenjaya Raga Zenta
This removes the following error log when stopping AP: ieee80211 phy0: brcmf_vif_set_mgmt_ie: vndr ie set error : -52 It happened if: 1) previously wlan interface was in station mode (wpa_supplicant) and connected to a hotspot 2) then started AP mode (hostapd) 3) and then stopped AP mode. The error happened when it tried to clear BRCMF_VNDR_IE_PRBREQ_FLAG. This flag is not set in `brcmf_config_ap_mgmt_ie`, but BRCMF_VNDR_IE_ASSOCRSP_FLAG is set instead. Signed-off-by: Renjaya Raga Zenta <ragazenta@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241121-brcmfmac-v1-1-02fc3fb427c2@gmail.com
2024-12-09wifi: wlcore: testmode: Constify strutc nla_policyChristophe JAILLET
'struct nla_policy' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security, especially when the structure holds some function pointers. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 5062 528 0 5590 15d6 drivers/net/wireless/ti/wlcore/testmode.o After: ===== text data bss dec hex filename 5178 404 0 5582 15ce drivers/net/wireless/ti/wlcore/testmode.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/78810e3ebb74ddbd3a4538f182bf1143b89baba7.1731332414.git.christophe.jaillet@wanadoo.fr
2024-12-09wifi: brcmfmac: fix scatter-gather handling by detecting end of sg listNorbert van Bolhuis
The scatter-gather handling uses a pre-allocated list (with nents entries). If the driver runs out of sg entries it will result in an oops. Let's detect this instead and make the SDIO block transfer fail. Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241108125609.107016-1-nvbolhuis@gmail.com
2024-12-09Merge tag 'scmi-fix-6.13' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fix for v6.13 Fix for the build issue in the ASoC driver with the SCMI support by enforcing the link-time dependency if IMX_SCMI_MISC_DRV is a loadable module but not if that is disabled. * tag 'scmi-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix i.MX build dependency Link: https://lore.kernel.org/r/20241205114348.708618-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-12-09Merge tag 'juno-fix-6.13' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Armv8 Juno fix for v6.13 Just a single fix updating the PCIe bus address range to accommodate the full ECAM window of 256MB available on most of the recent versions of RevC FVP models. * tag 'juno-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: fvp: Update PCIe bus-range property Link: https://lore.kernel.org/r/20241205114302.708433-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-12-09Merge branch 'net-sparx5-lan969x-fixes'David S. Miller
Daniel Machon says: ==================== net: sparx5: misc fixes for sparx5 and lan969x This series fixes various issues in the Sparx5 and lan969x drivers. Most of the fixes are for new issues introduced by the recent series adding lan969x switch support in the Sparx5 driver. Most notable is patch 1/5 that moves the lan969x dir into the sparx5 dir, in order to address a cyclic dependency issue reported by depmod, when installing modules. Details are in the commit descriptions. To: Andrew Lunn <andrew+netdev@lunn.ch> To: David S. Miller <davem@davemloft.net> To: Eric Dumazet <edumazet@google.com> To: Jakub Kicinski <kuba@kernel.org> To: Paolo Abeni <pabeni@redhat.com> To: Lars Povlsen <lars.povlsen@microchip.com> To: Steen Hegelund <Steen.Hegelund@microchip.com> To: UNGLinuxDriver@microchip.com To: Richard Cochran <richardcochran@gmail.com> To: Bjarni Jonasson <bjarni.jonasson@microchip.com> To: jensemil.schulzostergaard@microchip.com To: horatiu.vultur@microchip.com To: arnd@arndb.de To: jacob.e.keller@intel.com To: Parthiban.Veerasooran@microchip.com Cc: Calvin Owens <calvin@wbinvd.org> Cc: Muhammad Usama Anjum <Usama.Anjum@collabora.com> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org ==================== Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: sparx5: fix the maximum frame length registerDaniel Machon
On port initialization, we configure the maximum frame length accepted by the receive module associated with the port. This value is currently written to the MAX_LEN field of the DEV10G_MAC_ENA_CFG register, when in fact, it should be written to the DEV10G_MAC_MAXLEN_CFG register. Fix this. Fixes: 946e7fd5053a ("net: sparx5: add port module support") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: sparx5: fix default value of monitor portsDaniel Machon
When doing port mirroring, the physical port to send the frame to, is written to the FRMC_PORT_VAL field of the QFWD_FRAME_COPY_CFG register. This field is 7 bits wide on sparx5 and 6 bits wide on lan969x, and has a default value of 65 and 30, respectively (the number of front ports). On mirror deletion, we set the default value of the monitor port to 65 for this field, in case no more ports exists for the mirror. Needless to say, this will not fit the 6 bits on lan969x. Fix this by correctly using the n_ports constant instead. Fixes: 3f9e46347a46 ("net: sparx5: use SPX5_CONST for constants which already have a symbol") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: sparx5: fix FDMA performance issueDaniel Machon
The FDMA handler is responsible for scheduling a NAPI poll, which will eventually fetch RX packets from the FDMA queue. Currently, the FDMA handler is run in a threaded context. For some reason, this kills performance. Admittedly, I did not do a thorough investigation to see exactly what causes the issue, however, I noticed that in the other driver utilizing the same FDMA engine, we run the FDMA handler in hard IRQ context. Fix this performance issue, by running the FDMA handler in hard IRQ context, not deferring any work to a thread. Prior to this change, the RX UDP performance was: Interval Transfer Bitrate Jitter 0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms After this change, the rx UDP performance is: Interval Transfer Bitrate Jitter 0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms Fixes: 10615907e9b5 ("net: sparx5: switchdev: adding frame DMA functionality") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: lan969x: fix the use of spin_lock in PTP handlerDaniel Machon
We are mixing the use of spin_lock() and spin_lock_irqsave() functions in the PTP handler of lan969x. Fix this by correctly using the _irqsave variants. Fixes: 24fe83541755 ("net: lan969x: add PTP handler function") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> [1]: https://lore.kernel.org/netdev/20241024-sparx5-lan969x-switch-driver-2-v2-10-a0b5fae88a0f@microchip.com/ Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: lan969x: fix cyclic dependency reported by depmodDaniel Machon
Depmod reports a cyclic dependency between modules sparx5-switch.ko and lan969x-switch.ko: depmod: ERROR: Cycle detected: lan969x_switch -> sparx5_switch -> lan969x_switch depmod: ERROR: Found 2 modules in dependency cycles! make[2]: *** [scripts/Makefile.modinst:132: depmod] Error 1 make: *** [Makefile:224: __sub-make] Error 2 This makes sense, as they both require symbols from each other. Fix this by compiling lan969x support into the sparx5-switch.ko module. In order to do this, in a sensible way, we move the lan969x/ dir into the sparx5/ dir and do some code cleanup of code that is no longer required. After this patch, depmod will no longer complain, as lan969x support is compiled into the sparx5-swicth.ko module, and can no longer be compiled as a standalone module. Fixes: 98a01119608d ("net: sparx5: add compatible string for lan969x") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09spi: spi-cadence-qspi: Disable STIG mode for Altera SoCFPGA.Niravkumar L Rabara
STIG mode is enabled by default for less than 8 bytes data read/write. STIG mode doesn't work with Altera SocFPGA platform due hardware limitation. Add a quirks to disable STIG mode for Altera SoCFPGA platform. Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Link: https://patch.msgid.link/20241204063338.296959-1-niravkumar.l.rabara@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09spi: rockchip: Fix PM runtime count on no-op csChristian Loehle
The early bail out that caused an out-of-bounds write was removed with commit 5c018e378f91 ("spi: spi-rockchip: Fix out of bounds array access") Unfortunately that caused the PM runtime count to be unbalanced and underflowed on the first call. To fix that reintroduce a no-op check by reading the register directly. Cc: stable@vger.kernel.org Fixes: 5c018e378f91 ("spi: spi-rockchip: Fix out of bounds array access") Signed-off-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/1f2b3af4-2b7a-4ac8-ab95-c80120ebf44c@arm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()Christophe JAILLET
A aspeed_spi_start_user() is not balanced by a corresponding aspeed_spi_stop_user(). Add the missing call. Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/4052aa2f9a9ea342fa6af83fa991b55ce5d5819e.1732051814.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09regulator: axp20x: AXP717: set ramp_delayPhilippe Simons
AXP717 datasheet says that regulator ramp delay is 15.625 us/step, which is 10mV in our case. Add a AXP_DESC_RANGES_DELAY macro and update AXP_DESC_RANGES macro to expand to AXP_DESC_RANGES_DELAY with ramp_delay = 0 For DCDC4, steps is 100mv Add a AXP_DESC_DELAY macro and update AXP_DESC macro to expand to AXP_DESC_DELAY with ramp_delay = 0 This patch fix crashes when using CPU DVFS. Signed-off-by: Philippe Simons <simons.philippe@gmail.com> Tested-by: Hironori KIKUCHI <kikuchan98@gmail.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717") Link: https://patch.msgid.link/20241208124308.5630-1-simons.philippe@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmuJanaki Ramaiah Thota
Add description of the PMU node for the WCN6750B module. Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241209103455.9675-2-quic_janathot@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09Merge branch 'cn10k-ipswec-outbound-inline-support'David S. Miller
Bharat Bhushan says: ==================== cn10k-ipsec: Add outbound inline ipsec support This patch series adds outbound inline ipsec support on Marvell cn10k series of platform. One crypto hardware logical function (cpt-lf) per netdev is required for inline ipsec outbound functionality. Software prepare and submit crypto hardware (CPT) instruction for outbound inline ipsec crypto mode offload. The CPT instruction have details for encryption and authentication Crypto hardware encrypt, authenticate and provide the ESP packet to network hardware logic to transmit ipsec packet. First patch makes dma memory writable for in-place encryption, Second patch moves code to common file, Third patch disable backpressure on crypto (CPT) and network (NIX) hardware. Patch four onwards enables inline outbound ipsec. v9->v10: - Removed unlikely() in data-patch and used static_branch when at least a SA is configured. - Added missing READ_ONCE() as per comment on previous patch - Removed "\n" from end of extack messages - Poll for context write status check reduced to 100ms from 10s v8->v9: - Removed mutex lock to use hardware, now using hardware state - Previous versions were supporting only 64 SAs and a bitmap was used for same. That limitation is removed from this version. - Replaced netdev_err with NL_SET_ERR_MSG_MOD in state add flow as per comment in previous version v7->v8: - spell correction in patch 1/8 (s/sdk/skb) v6->v7: - skb data was mapped as device writeable but it was not ensured that skb is writeable. This version calls skb_unshare() to make skb data writeable (Thanks Jakub Kicinski for pointing out). v4->v5: - Fixed un-initialized warning and pointer check (comment from Kalesh Anakkur Purayil) v3->v4: - Few error messages in data-path removed and some moved under netif_msg_tx_err(). - Added check for crypto offload (XFRM_DEV_OFFLOAD_CRYPTO) Thanks "Leon Romanovsky" for pointing out - Fixed codespell error as per comment from Simon Horman - Added some other cleanup comment from Kalesh Anakkur Purayil v2->v3: - Fix smatch and sparse errors (Comment from Simon Horman) - Fix build error with W=1 (Comment from Simon Horman) https://patchwork.kernel.org/project/netdevbpf/patch/20240513105446.297451-6-bbhushan2@marvell.com/ - Some other minor cleanup as per comment https://www.spinics.net/lists/netdev/msg997197.html v1->v2: - Fix compilation error to build driver a module - Use dma_wmb() instead of architecture specific barrier - Fix couple of other compilation warnings ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09cn10k-ipsec: Enable outbound ipsec crypto offloadBharat Bhushan
Hardware is initialized and netdev transmit flow is hooked up for outbound ipsec crypto offload, so finally enable ipsec offload. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09cn10k-ipsec: Allow ipsec crypto offload for skb with SABharat Bhushan
Allow to use hardware offload for outbound ipsec crypto mode if security association (SA) is set for a given skb. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09cn10k-ipsec: Process outbound ipsec crypto offloadBharat Bhushan
Prepare and submit crypto hardware (CPT) instruction for outbound ipsec crypto offload. The CPT instruction have authentication offset, IV offset and encapsulation offset in input packet. Also provide SA context pointer which have details about algo, keys, salt etc. Crypto hardware encrypt, authenticate and provide the ESP packet to networking hardware. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09cn10k-ipsec: Add SA add/del support for outb ipsec crypto offloadBharat Bhushan
This patch adds support to add and delete Security Association (SA) xfrm ops. Hardware maintains SA context in memory allocated by software. Each SA context is 128 byte aligned and size of each context is multiple of 128-byte. Add support for transport and tunnel ipsec mode, ESP protocol, aead aes-gcm-icv16, key size 128/192/256-bits with 32bit salt. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09cn10k-ipsec: Init hardware for outbound ipsec crypto offloadBharat Bhushan
One crypto hardware logical function (cpt-lf) per netdev is required for outbound ipsec crypto offload. Allocate, attach and initialize one crypto hardware function when enabling outbound ipsec crypto offload. Crypto hardware function will be detached and freed on disabling outbound ipsec crypto offload. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09octeontx2-af: Disable backpressure between CPT and NIXBharat Bhushan
NIX can assert backpressure to CPT on the NIX<=>CPT link. Keep the backpressure disabled for now. NIX block anyways handles backpressure asserted by MAC due to PFC or flow control pkts. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09octeontx2-pf: Move skb fragment map/unmap to common codeBharat Bhushan
Move skb fragment map/unmap function to common file so as to reuse same for outbound IPsec crypto offload Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09octeontx2-pf: map skb data as device writeableBharat Bhushan
Crypto hardware need write permission for in-place encrypt or decrypt operation on skb-data to support IPsec crypto offload. That patch uses skb_unshare to make skb data writeable for ipsec crypto offload and map skb fragment memory as device read-write. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09sched/eevdf: More PELT vs DELAYED_DEQUEUEPeter Zijlstra
Vincent and Dietmar noted that while commit fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE") fixes the entity runnable stats, it does not adjust the cfs_rq runnable stats, which are based off of h_nr_running. Track h_nr_delayed such that we can discount those and adjust the signal. Fixes: fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE") Closes: https://lore.kernel.org/lkml/a9a45193-d0c6-4ba2-a822-464ad30b550e@arm.com/ Closes: https://lore.kernel.org/lkml/CAKfTPtCNUvWE_GX5LyvTF-WdxUT=ZgvZZv-4t=eWntg5uOFqiQ@mail.gmail.com/ [ Fixes checkpatch warnings and rebased ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reported-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20241202174606.4074512-3-vincent.guittot@linaro.org
2024-12-09sched/fair: Fix sched_can_stop_tick() for fair tasksVincent Guittot
We can't stop the tick of a rq if there are at least 2 tasks enqueued in the whole hierarchy and not only at the root cfs rq. rq->cfs.nr_running tracks the number of sched_entity at one level whereas rq->cfs.h_nr_running tracks all queued tasks in the hierarchy. Fixes: 11cc374f4643b ("sched_ext: Simplify scx_can_stop_tick() invocation in sched_can_stop_tick()") Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lore.kernel.org/r/20241202174606.4074512-2-vincent.guittot@linaro.org
2024-12-09sched/fair: Fix NEXT_BUDDYK Prateek Nayak
Adam reports that enabling NEXT_BUDDY insta triggers a WARN in pick_next_entity(). Moving clear_buddies() up before the delayed dequeue bits ensures no ->next buddy becomes delayed. Further ensure no new ->next buddy ever starts as delayed. Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") Reported-by: Adam Li <adamli@os.amperecomputing.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Adam Li <adamli@os.amperecomputing.com> Link: https://lkml.kernel.org/r/670a0d54-e398-4b1f-8a6e-90784e2fdf89@amd.com
2024-12-09drm/i915: Fix memory leak by correcting cache object name in error handlerJiasheng Jiang
Replace "slab_priorities" with "slab_dependencies" in the error handler to avoid memory leak. Fixes: 32eb6bcfdda9 ("drm/i915: Make request allocation caches global") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Jiasheng Jiang <jiashengjiangcool@outlook.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127201042.29620-1-jiashengjiangcool@gmail.com (cherry picked from commit 9bc5e7dc694d3112bbf0fa4c46ef0fa0f114937a) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915: Fix NULL pointer dereference in capture_engineEugene Kobyak
When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). Fixes: e8a3319c31a1 ("drm/i915: Allow error capture without a request") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12309 Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Eugene Kobyak <eugene.kobyak@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/xmsgfynkhycw3cf56akp4he2ffg44vuratocsysaowbsnhutzi@augnqbm777at (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915/color: Stop using non-posted DSB writes for legacy LUTVille Syrjälä
DSB LUT register writes vs. palette anti-collision logic appear to interact in interesting ways: - posted DSB writes simply vanish into thin air while anti-collision is active - non-posted DSB writes actually get blocked by the anti-collision logic, but unfortunately this ends up hogging the bus for long enough that unrelated parallel CPU MMIO accesses start to disappear instead Even though we are updating the LUT during vblank we aren't immune to the anti-collision logic because it kicks in briefly for pipe prefill (initiated at frame start). The safe time window for performing the LUT update is thus between the undelayed vblank and frame start. Turns out that with low enough CDCLK frequency (DSB execution speed depends on CDCLK) we can exceed that. As we are currently using non-posted writes for the legacy LUT updates, in which case we can hit the far more severe failure mode. The problem is exacerbated by the fact that non-posted writes are much slower than posted writes (~4x it seems). To mititage the problem let's switch to using posted DSB writes for legacy LUT updates (which will involve using the double write approach to avoid other problems with DSB vs. legacy LUT writes). Despite writing each register twice this will in fact make the legacy LUT update faster when compared to the non-posted write approach, making the problem less likely to appear. The failure mode is also less severe. This isn't the 100% solution we need though. That will involve estimating how long the LUT update will take, and pushing frame start and/or delayed vblank forward to guarantee that the update will have finished by the time the pipe prefill starts... Cc: stable@vger.kernel.org Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates") Fixes: 25ea3411bd23 ("drm/i915/dsb: Use non-posted register writes for legacy LUT") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12494 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241120164123.12706-3-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> (cherry picked from commit 2504a316b35d49522f39cf0dc01830d7c36a9be4) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915/dsb: Don't use indexed register writes needlesslyVille Syrjälä
Turns out the DSB indexed register write command has rather significant initial overhead compared to the normal MMIO write command. Based on some quick experiments on TGL you have to write the register at least ~5 times for the indexed write command to come out ahead. If you write the register less times than that the MMIO write is faster. So it seems my automagic indexed write logic was a bit misguided. Go back to the original approach only use indexed writes for the cases we know will benefit from it (indexed LUT register updates). Currently we shouldn't have any cases where this truly matters (just some rare double writes to the precision LUT index registers), but we will need to switch the legacy LUT updates to write each LUT register twice (to avoid some palette anti-collision logic troubles). This would be close to the worst case for using indexed writes (two writes per register, and 256 separate registers). Using the MMIO write command should shave off around 30% of the execution time compared to using the indexed write command. Cc: stable@vger.kernel.org Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates") Fixes: 25ea3411bd23 ("drm/i915/dsb: Use non-posted register writes for legacy LUT") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241120164123.12706-2-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> (cherry picked from commit ecba559a88ab8399a41893d7828caf4dccbeab6c) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09sound: usb: format: don't warn that raw DSD is unsupportedAdrian Ratiu
UAC 2 & 3 DAC's set bit 31 of the format to signal support for a RAW_DATA type, typically used for DSD playback. This is correctly tested by (format & UAC*_FORMAT_TYPE_I_RAW_DATA), fp->dsd_raw = true; and call snd_usb_interface_dsd_format_quirks(), however a confusing and unnecessary message gets printed because the bit is not properly tested in the last "unsupported" if test: if (format & ~0x3F) { ... } For example the output: usb 7-1: new high-speed USB device number 5 using xhci_hcd usb 7-1: New USB device found, idVendor=262a, idProduct=9302, bcdDevice=0.01 usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 usb 7-1: Product: TC44C usb 7-1: Manufacturer: TC44C usb 7-1: SerialNumber: 5000000001 hid-generic 0003:262A:9302.001E: No inputs registered, leaving hid-generic 0003:262A:9302.001E: hidraw6: USB HID v1.00 Device [DDHIFI TC44C] on usb-0000:08:00.3-1/input0 usb 7-1: 2:4 : unsupported format bits 0x100000000 This last "unsupported format" is actually wrong: we know the format is a RAW_DATA which we assume is DSD, so there is no need to print the confusing message. This we unset bit 31 of the format after recognizing it, to avoid the message. Suggested-by: Takashi Iwai <tiwai@suse.com> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Link: https://patch.msgid.link/20241209090529.16134-2-adrian.ratiu@collabora.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-12-09sound: usb: enable DSD output for ddHiFi TC44CAdrian Ratiu
This is a UAC 2 DAC capable of raw DSD on intf 2 alt 4: Bus 007 Device 004: ID 262a:9302 SAVITECH Corp. TC44C Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 [unknown] bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x262a SAVITECH Corp. idProduct 0x9302 TC44C bcdDevice 0.01 iManufacturer 1 DDHIFI iProduct 2 TC44C iSerial 6 5000000001 ....... Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 4 bNumEndpoints 2 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 32 iInterface 0 AudioStreaming Interface Descriptor: bLength 16 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 3 bmControls 0x00 bFormatType 1 bmFormats 0x80000000 bNrChannels 2 bmChannelConfig 0x00000000 iChannelNames 0 ....... Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Link: https://patch.msgid.link/20241209090529.16134-1-adrian.ratiu@collabora.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-12-09Merge branch 'Add IP-TFS mode to xfrm'Steffen Klassert
Christian Hopps says: ==================== * Summary of Changes: This patchset adds a new xfrm mode implementing on-demand IP-TFS. IP-TFS (AggFrag encapsulation) has been standardized in RFC9347. Link: https://www.rfc-editor.org/rfc/rfc9347.txt This feature supports demand driven (i.e., non-constant send rate) IP-TFS to take advantage of the AGGFRAG ESP payload encapsulation. This payload type supports aggregation and fragmentation of the inner IP packet stream which in turn yields higher small-packet bandwidth as well as reducing MTU/PMTU issues. Congestion control is unimplementated as the send rate is demand driven rather than constant. In order to allow loading this fucntionality as a module a set of callbacks xfrm_mode_cbs has been added to xfrm as well. Patchset Structure: ------------------- The first 5 commits are changes to the net and xfrm infrastructure to support the callbacks as well as more generic IP-TFS additions that may be used outside the actual IP-TFS implementation. - xfrm: config: add CONFIG_XFRM_IPTFS - include: uapi: protocol number and packet structs for AGGFRAG in ESP - xfrm: netlink: add config (netlink) options - xfrm: add mode_cbs module functionality - xfrm: add generic iptfs defines and functionality The last 10 commits constitute the IP-TFS implementation constructed in layers to make review easier. The first 9 commits all apply to a single file `net/xfrm/xfrm_iptfs.c`, the last commit adds a new tracepoint header file along with the use of these new tracepoint calls. - xfrm: iptfs: add new iptfs xfrm mode impl - xfrm: iptfs: add user packet (tunnel ingress) handling - xfrm: iptfs: share page fragments of inner packets - xfrm: iptfs: add fragmenting of larger than MTU user packets - xfrm: iptfs: add basic receive packet (tunnel egress) handling - xfrm: iptfs: handle received fragmented inner packets - xfrm: iptfs: add reusing received skb for the tunnel egress packet - xfrm: iptfs: add skb-fragment sharing code - xfrm: iptfs: handle reordering of received packets - xfrm: iptfs: add tracepoint functionality ==================== Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-12-09efivarfs: Fix error on non-existent fileJames Bottomley
When looking up a non-existent file, efivarfs returns -EINVAL if the file does not conform to the NAME-GUID format and -ENOENT if it does. This is caused by efivars_d_hash() returning -EINVAL if the name is not formatted correctly. This error is returned before simple_lookup() returns a negative dentry, and is the error value that the user sees. Fix by removing this check. If the file does not exist, simple_lookup() will return a negative dentry leading to -ENOENT and efivarfs_create() already has a validity check before it creates an entry (and will correctly return -EINVAL) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <stable@vger.kernel.org> [ardb: make efivarfs_valid_name() static] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-12-09ALSA: hda/realtek: Add new alc2xx-fixup-headset-mic modelVasiliy Kovalev
Introduces the alc2xx-fixup-headset-mic model to simplify enabling headset microphones on ALC2XX codecs. Many recent configurations, as well as older systems that lacked this fix for a long time, leave headset microphones inactive by default. This addition provides a flexible workaround using the existing ALC2XX_FIXUP_HEADSET_MIC quirk. Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Link: https://patch.msgid.link/20241207201836.6879-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-12-09ALSA: hda/ca0132: Use standard HD-audio quirk matching helpersTakashi Iwai
CA0132 used the PCI SSID lookup helper that doesn't support the model string matching or quirk aliasing. Replace it with the standard HD-audio quirk helpers for supporting those, and add the definition of the model strings for supported quirks, too. There should be no visible change to the outside for the working system, but the driver will parse the model option and apply the quirk based on it from now on. Link: https://patch.msgid.link/20241207133754.3658-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-12-09ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()Joe Hattori
The OF node reference obtained by of_parse_phandle_with_args() is not released on early return. Add a of_node_put() call before returning. Fixes: 8996b89d6bc9 ("ata: add platform driver for Calxeda AHCI controller") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-12-08Linux 6.13-rc2v6.13-rc2Linus Torvalds
2024-12-08Merge tag 'kbuild-fixes-v6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix a section mismatch warning in modpost - Fix Debian package build error with the O= option * tag 'kbuild-fixes-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: deb-pkg: fix build error with O= modpost: Add .irqentry.text to OTHER_SECTIONS
2024-12-08Merge tag 'irq_urgent_for_v6.13_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Fix a /proc/interrupts formatting regression - Have the BCM2836 interrupt controller enter power management states properly - Other fixlets * tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing genirq/proc: Add missing space separator back irqchip/bcm2836: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND irqchip/gic-v3: Fix irq_complete_ack() comment
2024-12-08Merge tag 'timers_urgent_for_v6.13_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Handle the case where clocksources with small counter width can, in conjunction with overly long idle sleeps, falsely trigger the negative motion detection of clocksources * tag 'timers_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Make negative motion detection more robust
2024-12-08Merge tag 'x86_urgent_for_v6.13_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Have the Automatic IBRS setting check on AMD does not falsely fire in the guest when it has been set already on the host - Make sure cacheinfo structures memory is allocated to address a boot NULL ptr dereference on Intel Meteor Lake which has different numbers of subleafs in its CPUID(4) leaf - Take care of the GDT restoring on the kexec path too, as expected by the kernel - Make sure SMP is not disabled when IO-APIC is disabled on the kernel cmdline - Add a PGD flag _PAGE_NOPTISHADOW to instruct machinery not to propagate changes to the kernelmode page tables, to the user portion, in PTI - Mark Intel Lunar Lake as affected by an issue where MONITOR wakeups can get lost and thus user-visible delays happen - Make sure PKRU is properly restored with XRSTOR on AMD after a PRKU write of 0 (WRPKRU) which will mark PKRU in its init state and thus lose the actual buffer * tag 'x86_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: WARN when setting EFER.AUTOIBRS if and only if the WRMSR fails x86/cacheinfo: Delete global num_cache_leaves cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU x86/kexec: Restore GDT on return from ::preserve_context kexec x86/cpu/topology: Remove limit of CPUs due to disabled IO/APIC x86/mm: Add _PAGE_NOPTISHADOW bit to avoid updating userspace page tables x86/cpu: Add Lunar Lake to list of CPUs with a broken MONITOR implementation x86/pkeys: Ensure updated PKRU value is XRSTOR'd x86/pkeys: Change caller of update_pkru_in_sigframe()
2024-12-08Merge tag 'mm-hotfixes-stable-2024-12-07-22-39' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM. The usual bunch of singletons - please see the relevant changelogs for details" * tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits) iio: magnetometer: yas530: use signed integer type for clamp limits sched/numa: fix memory leak due to the overwritten vma->numab_state mm/damon: fix order of arguments in damos_before_apply tracepoint lib: stackinit: hide never-taken branch from compiler mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio() scatterlist: fix incorrect func name in kernel-doc mm: correct typo in MMAP_STATE() macro mm: respect mmap hint address when aligning for THP mm: memcg: declare do_memsw_account inline mm/codetag: swap tags when migrate pages ocfs2: update seq_file index in ocfs2_dlm_seq_next stackdepot: fix stack_depot_save_flags() in NMI context mm: open-code page_folio() in dump_page() mm: open-code PageTail in folio_flags() and const_folio_flags() mm: fix vrealloc()'s KASAN poisoning logic Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()" selftests/damon: add _damon_sysfs.py to TEST_FILES selftest: hugetlb_dio: fix test naming ocfs2: free inode when ocfs2_get_init_inode() fails nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry() ...
2024-12-08phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PMCristian Ciocaltea
In some cases, rk_hdptx_phy_runtime_resume() may be invoked before platform_set_drvdata() is executed in ->probe(), leading to a NULL pointer dereference when using the return of dev_get_drvdata(). Ensure platform_set_drvdata() is called before devm_pm_runtime_enable(). Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241023-phy-sam-hdptx-rpm-fix-v1-1-87f4c994e346@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-08tracing/eprobe: Fix to release eprobe when failed to add dyn_eventMasami Hiramatsu (Google)
Fix eprobe event to unregister event call and release eprobe when it fails to add dynamic event correctly. Link: https://lore.kernel.org/all/173289886698.73724.1959899350183686006.stgit@devnote2/ Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-12-08kbuild: deb-pkg: fix build error with O=Masahiro Yamada
Since commit 13b25489b6f8 ("kbuild: change working directory to external module directory with M="), the Debian package build fails if a relative path is specified with the O= option. $ make O=build bindeb-pkg [ snip ] dpkg-deb: building package 'linux-image-6.13.0-rc1' in '../linux-image-6.13.0-rc1_6.13.0-rc1-6_amd64.deb'. Rebuilding host programs with x86_64-linux-gnu-gcc... make[6]: Entering directory '/home/masahiro/linux/build' /home/masahiro/linux/Makefile:190: *** specified kernel directory "build" does not exist. Stop. This occurs because the sub_make_done flag is cleared, even though the working directory is already in the output directory. Passing KBUILD_OUTPUT=. resolves the issue. Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=") Reported-by: Charlie Jenkins <charlie@rivosinc.com> Closes: https://lore.kernel.org/all/Z1DnP-GJcfseyrM3@ghost/ Tested-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-12-08modpost: Add .irqentry.text to OTHER_SECTIONSThomas Gleixner
The compiler can fully inline the actual handler function of an interrupt entry into the .irqentry.text entry point. If such a function contains an access which has an exception table entry, modpost complains about a section mismatch: WARNING: vmlinux.o(__ex_table+0x447c): Section mismatch in reference ... The relocation at __ex_table+0x447c references section ".irqentry.text" which is not in the list of authorized sections. Add .irqentry.text to OTHER_SECTIONS to cure the issue. Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # needed for linux-5.4-y Link: https://lore.kernel.org/all/20241128111844.GE10431@google.com/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-12-07rtase: Refine the if statementJustin Lai
Refine the if statement to improve readability. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20241206084851.760475-1-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 03:04:13 +0000