| Age | Commit message (Collapse) | Author |
|---|
|
If rtnl_get_peer_net() fails, then propagate the error code. Don't
return success.
Fixes: 48327566769a ("rtnetlink: fix double call of rtnl_link_get_net_ifla()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/a2d20cd4-387a-4475-887c-bb7d0e88e25a@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Ocelot PTP fixes
This is another attempt at "net: mscc: ocelot: be resilient to loss of
PTP packets during transmission".
https://lore.kernel.org/netdev/20241203164755.16115-1-vladimir.oltean@nxp.com/
The central change is in patch 4/5. It recovers a port from a very
reproducible condition where previously, it would become unable to take
any hardware TX timestamp.
Then we have patches 1/5 and 5/5 which are extra bug fixes.
Patches 2/5 and 3/5 are logical changes split out of the monolithic
patch previously submitted as v1, so that patch 4/5 is hopefully easier
to follow.
====================
Link: https://patch.msgid.link/20241205145519.1236778-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An unsupported RX filter will leave the port with TX timestamping still
applied as per the new request, rather than the old setting. When
parsing the tx_type, don't apply it just yet, but delay that until after
we've parsed the rx_filter as well (and potentially returned -ERANGE for
that).
Similarly, copy_to_user() may fail, which is a rare occurrence, but
should still be treated by unwinding what was done.
Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Felix DSA driver presents unique challenges that make the simplistic
ocelot PTP TX timestamping procedure unreliable: any transmitted packet
may be lost in hardware before it ever leaves our local system.
This may happen because there is congestion on the DSA conduit, the
switch CPU port or even user port (Qdiscs like taprio may delay packets
indefinitely by design).
The technical problem is that the kernel, i.e. ocelot_port_add_txtstamp_skb(),
runs out of timestamp IDs eventually, because it never detects that
packets are lost, and keeps the IDs of the lost packets on hold
indefinitely. The manifestation of the issue once the entire timestamp
ID range becomes busy looks like this in dmesg:
mscc_felix 0000:00:00.5: port 0 delivering skb without TX timestamp
mscc_felix 0000:00:00.5: port 1 delivering skb without TX timestamp
At the surface level, we need a timeout timer so that the kernel knows a
timestamp ID is available again. But there is a deeper problem with the
implementation, which is the monotonically increasing ocelot_port->ts_id.
In the presence of packet loss, it will be impossible to detect that and
reuse one of the holes created in the range of free timestamp IDs.
What we actually need is a bitmap of 63 timestamp IDs tracking which one
is available. That is able to use up holes caused by packet loss, but
also gives us a unique opportunity to not implement an actual timer_list
for the timeout timer (very complicated in terms of locking).
We could only declare a timestamp ID stale on demand (lazily), aka when
there's no other timestamp ID available. There are pros and cons to this
approach: the implementation is much more simple than per-packet timers
would be, but most of the stale packets would be quasi-leaked - not
really leaked, but blocked in driver memory, since this algorithm sees
no reason to free them.
An improved technique would be to check for stale timestamp IDs every
time we allocate a new one. Assuming a constant flux of PTP packets,
this avoids stale packets being blocked in memory, but of course,
packets lost at the end of the flux are still blocked until the flux
resumes (nobody left to kick them out).
Since implementing per-packet timers is way too complicated, this should
be good enough.
Testing procedure:
Persistently block traffic class 5 and try to run PTP on it:
$ tc qdisc replace dev swp3 parent root taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0xdf 100000 flags 0x2
[ 126.948141] mscc_felix 0000:00:00.5: port 3 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
$ ptp4l -i swp3 -2 -P -m --socket_priority 5 --fault_reset_interval ASAP --logSyncInterval -3
ptp4l[70.351]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.354]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.358]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 70.394583] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[70.406]: timed out while polling for tx timestamp
ptp4l[70.406]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[70.406]: port 1 (swp3): send peer delay response failed
ptp4l[70.407]: port 1 (swp3): clearing fault immediately
ptp4l[70.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 71.394858] mscc_felix 0000:00:00.5: port 3 timestamp id 1
ptp4l[71.400]: timed out while polling for tx timestamp
ptp4l[71.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[71.401]: port 1 (swp3): send peer delay response failed
ptp4l[71.401]: port 1 (swp3): clearing fault immediately
[ 72.393616] mscc_felix 0000:00:00.5: port 3 timestamp id 2
ptp4l[72.401]: timed out while polling for tx timestamp
ptp4l[72.402]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[72.402]: port 1 (swp3): send peer delay response failed
ptp4l[72.402]: port 1 (swp3): clearing fault immediately
ptp4l[72.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 73.395291] mscc_felix 0000:00:00.5: port 3 timestamp id 3
ptp4l[73.400]: timed out while polling for tx timestamp
ptp4l[73.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[73.400]: port 1 (swp3): send peer delay response failed
ptp4l[73.400]: port 1 (swp3): clearing fault immediately
[ 74.394282] mscc_felix 0000:00:00.5: port 3 timestamp id 4
ptp4l[74.400]: timed out while polling for tx timestamp
ptp4l[74.401]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[74.401]: port 1 (swp3): send peer delay response failed
ptp4l[74.401]: port 1 (swp3): clearing fault immediately
ptp4l[74.953]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 75.396830] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 75.405760] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[75.410]: timed out while polling for tx timestamp
ptp4l[75.411]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[75.411]: port 1 (swp3): send peer delay response failed
ptp4l[75.411]: port 1 (swp3): clearing fault immediately
(...)
Remove the blocking condition and see that the port recovers:
$ same tc command as above, but use "sched-entry S 0xff" instead
$ same ptp4l command as above
ptp4l[99.489]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.490]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.492]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 100.403768] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 100.412545] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 1 which seems lost
[ 100.421283] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 2 which seems lost
[ 100.430015] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 3 which seems lost
[ 100.438744] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 4 which seems lost
[ 100.447470] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 100.505919] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[100.963]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 101.405077] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 101.507953] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.405405] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.509391] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.406003] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.510011] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.405601] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.510624] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[104.965]: selected best master clock d858d7.fffe.00ca6d
ptp4l[104.966]: port 1 (swp3): assuming the grand master role
ptp4l[104.967]: port 1 (swp3): LISTENING to GRAND_MASTER on RS_GRAND_MASTER
[ 105.106201] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.232420] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.359001] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.405500] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.485356] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.511220] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.610938] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.737237] mscc_felix 0000:00:00.5: port 3 timestamp id 0
(...)
Notice that in this new usage pattern, a non-congested port should
basically use timestamp ID 0 all the time, progressing to higher numbers
only if there are unacknowledged timestamps in flight. Compare this to
the old usage, where the timestamp ID used to monotonically increase
modulo OCELOT_MAX_PTP_ID.
In terms of implementation, this simplifies the bookkeeping of the
ocelot_port :: ts_id and ptp_skbs_in_flight. Since we need to traverse
the list of two-step timestampable skbs for each new packet anyway, the
information can already be computed and does not need to be stored.
Also, ocelot_port->tx_skbs is always accessed under the switch-wide
ocelot->ts_id_lock IRQ-unsafe spinlock, so we don't need the skb queue's
lock and can use the unlocked primitives safely.
This problem was actually detected using the tc-taprio offload, and is
causing trouble in TSN scenarios, which Felix (NXP LS1028A / VSC9959)
supports but Ocelot (VSC7514) does not. Thus, I've selected the commit
to blame as the one adding initial timestamping support for the Felix
switch.
Fixes: c0bcf537667c ("net: dsa: ocelot: add hardware timestamping support for Felix")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ocelot_get_txtstamp() is a threaded IRQ handler, requested explicitly as
such by both ocelot_ptp_rdy_irq_handler() and vsc9959_irq_handler().
As such, it runs with IRQs enabled, and not in hardirq context. Thus,
ocelot_port_add_txtstamp_skb() has no reason to turn off IRQs, it cannot
be preempted by ocelot_get_txtstamp(). For the same reason,
dev_kfree_skb_any_reason() will always evaluate as kfree_skb_reason() in
this calling context, so just simplify the dev_kfree_skb_any() call to
kfree_skb().
Also, ocelot_port_txtstamp_request() runs from NET_TX softirq context,
not with hardirqs enabled. Thus, ocelot_get_txtstamp() which shares the
ocelot_port->tx_skbs.lock lock with it, has no reason to disable hardirqs.
This is part of a larger rework of the TX timestamping procedure.
A logical subportion of the rework has been split into a separate
change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This condition, theoretically impossible to trigger, is not really
handled well. By "continuing", we are skipping the write to SYS_PTP_NXT
which advances the timestamp FIFO to the next entry. So we are reading
the same FIFO entry all over again, printing stack traces and eventually
killing the kernel.
No real problem has been observed here. This is part of a larger rework
of the timestamp IRQ procedure, with this logical change split out into
a patch of its own. We will need to "goto next_ts" for other conditions
as well.
Fixes: 9fde506e0c53 ("net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If ocelot_port_add_txtstamp_skb() fails, for example due to a full PTP
timestamp FIFO, we must undo the skb_clone_sk() call with kfree_skb().
Otherwise, the reference to the skb clone is lost.
Fixes: 52849bcf0029 ("net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported a warning in __sk_skb_reason_drop().
Commit 61b95c70f344 ("net: ip: make ip_route_input_rcu() return
drop reasons") missed a path where -EINVAL is returned.
Then, the cited commit started to trigger the warning with the
invalid error.
Let's fix it by returning SKB_DROP_REASON_NOT_SPECIFIED.
[0]:
WARNING: CPU: 0 PID: 10 at net/core/skbuff.c:1216 __sk_skb_reason_drop net/core/skbuff.c:1216 [inline]
WARNING: CPU: 0 PID: 10 at net/core/skbuff.c:1216 sk_skb_reason_drop+0x97/0x1b0 net/core/skbuff.c:1241
Modules linked in:
CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.12.0-10686-gbb18265c3aba #10 1c308307628619808b5a4a0495c4aab5637b0551
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker
RIP: 0010:__sk_skb_reason_drop net/core/skbuff.c:1216 [inline]
RIP: 0010:sk_skb_reason_drop+0x97/0x1b0 net/core/skbuff.c:1241
Code: 5d 41 5c 41 5d 41 5e e9 e7 9e 95 fd e8 e2 9e 95 fd 31 ff 44 89 e6 e8 58 a1 95 fd 45 85 e4 0f 85 a2 00 00 00 e8 ca 9e 95 fd 90 <0f> 0b 90 e8 c1 9e 95 fd 44 89 e6 bf 01 00 00 00 e8 34 a1 95 fd 41
RSP: 0018:ffa0000000007650 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 000000000000ffff RCX: ffffffff83bc3592
RDX: ff110001002a0000 RSI: ffffffff83bc34d6 RDI: 0000000000000007
RBP: ff11000109ee85f0 R08: 0000000000000001 R09: ffe21c00213dd0da
R10: 000000000000ffff R11: 0000000000000000 R12: 00000000ffffffea
R13: 0000000000000000 R14: ff11000109ee86d4 R15: ff11000109ee8648
FS: 0000000000000000(0000) GS:ff1100011a000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020177000 CR3: 0000000108a3d006 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<IRQ>
kfree_skb_reason include/linux/skbuff.h:1263 [inline]
ip_rcv_finish_core.constprop.0+0x896/0x2320 net/ipv4/ip_input.c:424
ip_list_rcv_finish.constprop.0+0x1b2/0x710 net/ipv4/ip_input.c:610
ip_sublist_rcv net/ipv4/ip_input.c:636 [inline]
ip_list_rcv+0x34a/0x460 net/ipv4/ip_input.c:670
__netif_receive_skb_list_ptype net/core/dev.c:5715 [inline]
__netif_receive_skb_list_core+0x536/0x900 net/core/dev.c:5762
__netif_receive_skb_list net/core/dev.c:5814 [inline]
netif_receive_skb_list_internal+0x77c/0xdc0 net/core/dev.c:5905
gro_normal_list include/net/gro.h:515 [inline]
gro_normal_list include/net/gro.h:511 [inline]
napi_complete_done+0x219/0x8c0 net/core/dev.c:6256
wg_packet_rx_poll+0xbff/0x1e40 drivers/net/wireguard/receive.c:488
__napi_poll.constprop.0+0xb3/0x530 net/core/dev.c:6877
napi_poll net/core/dev.c:6946 [inline]
net_rx_action+0x9eb/0xe30 net/core/dev.c:7068
handle_softirqs+0x1ac/0x740 kernel/softirq.c:554
do_softirq kernel/softirq.c:455 [inline]
do_softirq+0x48/0x80 kernel/softirq.c:442
</IRQ>
<TASK>
__local_bh_enable_ip+0xed/0x110 kernel/softirq.c:382
spin_unlock_bh include/linux/spinlock.h:396 [inline]
ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
wg_packet_decrypt_worker+0x3ba/0x580 drivers/net/wireguard/receive.c:499
process_one_work+0x940/0x1a70 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x639/0xe30 kernel/workqueue.c:3391
kthread+0x283/0x350 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244
</TASK>
Fixes: 82d9983ebeb8 ("net: ip: make ip_route_input_noref() return drop reasons")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241206020715.80207-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: net: add negotiation of in-band capabilities (remainder)
Here are the last three patches which were not included in the non-RFC
posting, but were in the RFC posting. These add the .pcs_inband()
method to the Lynx, MTK Lynx and XPCS drivers.
====================
Link: https://patch.msgid.link/Z1F1b8eh8s8T627j@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report the PCS inband capabilities to phylink for XPCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tJ8NW-006L5V-I9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report the PCS in-band capabilities to phylink for the LynxI PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tJ8NR-006L5P-E3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report the PCS in-band capabilities to phylink for the Lynx PCS.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tJ8NM-006L5J-AH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently tun checks the group permission even if the user have matched.
Besides going against the usual permission semantic, this has a
very interesting implication: if the tun group is not among the
supplementary groups of the tun user, then effectively no one can
access the tun device. CAP_SYS_ADMIN still can, but its the same as
not setting the tun ownership.
This patch relaxes the group checking so that either the user match
or the group match is enough. This avoids the situation when no one
can access the device even though the ownership is properly set.
Also I simplified the logic by removing the redundant inversions:
tun_not_capable() --> !tun_capable()
Signed-off-by: Stas Sergeev <stsp2@yandex.ru>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241205073614.294773-1-stsp2@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.
This causes problems such as:
dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed
and with DMA_API_DEBUG enabled:
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Thierry Reding <thierry.reding@gmail.com>
Fixes: 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/E1tJXcx-006N4Z-PC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without -o the tool currently crashes, but it's not marked
as required. The only thing we can't do without it is to
generate the correct #include for user source files, but
we can put a placeholder instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241206113100.89d35bf124d6.I9228fb704e6d5c9d8e046ef15025a47a48439c1e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes argparse validate the input and helps users
understand which modes are possible.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241206113100.e2ab5cf6937c.Ie149a0ca5df713860964b44fe9d9ae547f2e1553@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull smb client fixes from Steve French:
- DFS fix (for race with tree disconnect and dfs cache worker)
- Four fixes for SMB3.1.1 posix extensions:
- improve special file support e.g. to Samba, retrieving the file
type earlier
- reduce roundtrips (e.g. on ls -l, in some cases)
* tag '6.13-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential race in cifs_put_tcon()
smb3.1.1: fix posix mounts to older servers
fs/smb/client: cifs_prime_dcache() for SMB3 POSIX reparse points
fs/smb/client: Implement new SMB3 POSIX type
fs/smb/client: avoid querying SMB2_OP_QUERY_WSL_EA for SMB3 POSIX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Large number of small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: scsi_debug: Fix hrtimer support for ndelay
scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN as an error
scsi: ufs: core: Add missing post notify for power mode change
scsi: sg: Fix slab-use-after-free read in sg_release()
scsi: ufs: core: sysfs: Prevent div by zero
scsi: qla2xxx: Update version to 10.02.09.400-k
scsi: qla2xxx: Supported speed displayed incorrectly for VPorts
scsi: qla2xxx: Fix NVMe and NPIV connect issue
scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt
scsi: qla2xxx: Fix use after free on unload
scsi: qla2xxx: Fix abort in bsg timeout
scsi: mpi3mr: Update driver version to 8.12.0.3.50
scsi: mpi3mr: Handling of fault code for insufficient power
scsi: mpi3mr: Start controller indexing from 0
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
scsi: mpi3mr: Synchronize access to ioctl data buffer
scsi: mpt3sas: Update driver version to 51.100.00.00
scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
scsi: ufs: pltfrm: Drop PM runtime reference count after ufshcd_remove()
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)
- CPU hotplug ordering fixes
- Add missing MODULE_DESCRIPTION for rnull
- bcache error value fix
- virtio-blk queue freeze fix
* tag 'block-6.13-20241207' of git://git.kernel.dk/linux:
blk-mq: move cpuhp callback registering out of q->sysfs_lock
blk-mq: register cpuhp callback after hctx is added to xarray table
virtio-blk: don't keep queue frozen during system suspend
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
nvme-rdma: unquiesce admin_q before destroy it
nvme-tcp: fix the memleak while create new ctrl failed
nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary
nvmet: replace kmalloc + memset with kzalloc for data allocation
nvme-fabrics: handle zero MAXCMD without closing the connection
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again
nvme-pci: remove two deallocate zeroes quirks
block: rnull: add missing MODULE_DESCRIPTION
nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported
nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
|
|
Pull io_uring fix from Jens Axboe:
"A single fix for a parameter type which affects 32-bit"
* tag 'io_uring-6.13-20241207' of git://git.kernel.dk/linux:
io_uring: Change res2 parameter type in io_uring_cmd_done
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull jffs2 fix from Richard Weinberger:
- Fixup rtime compressor bounds checking
* tag 'ubifs-for-linus-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: Fix rtime decompressor
|
|
Use implicit feedback from the capture endpoint to fix popping
sounds during playback.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219567
Signed-off-by: Jaakko Salo <jaakkos@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241206164448.8136-1-jaakkos@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Linus noticed that the new if_not_guard() definition is fragile:
"This macro generates actively wrong code if it happens to be inside an
if-statement or a loop without a block.
IOW, code like this:
for (iterate-over-something)
if_not_guard(a)
return -BUSY;
looks like will build fine, but will generate completely incorrect code."
The reason is that the __if_not_guard() macro is multi-statement, so
while most kernel developers expect macros to be simple or at least
compound statements - but for __if_not_guard() it is not so:
#define __if_not_guard(_name, _id, args...) \
BUILD_BUG_ON(!__is_cond_ptr(_name)); \
CLASS(_name, _id)(args); \
if (!__guard_ptr(_name)(&_id))
To add insult to injury, the placement of the BUILD_BUG_ON() line makes
the macro appear to compile fine, but it will generate incorrect code
as Linus reported, for example if used within iteration or conditional
statements that will use the first statement of a macro as a loop body
or conditional statement body.
[ I'd also like to note that the original submission by David Lechner did
not contain the BUILD_BUG_ON() line, so it was safer than what we ended
up committing. Mea culpa. ]
It doesn't appear to be possible to turn this macro into a robust
single or compound statement that could be used in single statements,
due to the necessity to define an auto scope variable with an open
scope and the necessity of it having to expand to a partial 'if'
statement with no body.
Instead of trying to work around this fragility, just remove the
construct before it gets used.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z1LBnX9TpZLR5Dkf@gmail.com
|
|
Guillaume Nault says:
====================
net: Convert some UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS.
VXLAN, Geneve and Bareudp use various device counters for managing
RX and TX statistics:
* VXLAN uses the device core_stats for RX and TX drops, tstats for
regular RX/TX counters and DEV_STATS_INC() for various types of
RX/TX errors.
* Geneve uses tstats for regular RX/TX counters and DEV_STATS_INC()
for everything else, include RX/TX drops.
* Bareudp, was recently converted to follow VXLAN behaviour, that is,
device core_stats for RX and TX drops, tstats for regular RX/TX
counters and DEV_STATS_INC() for other counter types.
Let's consolidate statistics management around the dstats counters
instead. This avoids using core_stats in VXLAN and Bareudp, as
core_stats is supposed to be used by core networking code only (and not
in drivers). This also allows Geneve to avoid using atomic increments
when updating RX and TX drop counters, as dstats is per-cpu. Finally,
this also simplifies the code as all three modules now handle stats in
the same way and with only two different sets of counters (the per-cpu
dstats and the atomic DEV_STATS_INC()).
Patch 1 creates dstats helper functions that can be used outside of VRF
(until then, dstats was VRF-specific).
Then patches 2 to 4, convert VXLAN, Geneve and Bareudp, one by one.
====================
Link: https://patch.msgid.link/cover.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bareudp uses the TSTATS infrastructure (dev_sw_netstats_*()) for RX
packet counters. It was also recently converted to use the device core
stats (dev_core_stats_*()) for RX and TX drops (see commit 788d5d655bc9
("bareudp: Use pcpu stats to update rx_dropped counter.")).
Since core stats are to be avoided in drivers, and for consistency with
VXLAN and Geneve, let's convert packet stats handling to DSTATS, which
can handle RX/TX stats and packet drops. Statistics that don't fit
DSTATS are still updated atomically with DEV_STATS_INC().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/0f4f8448db3ff449ac6e939872b28cf3f8982da7.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Geneve uses the TSTATS infrastructure (dev_sw_netstats_*()) for RX
packet counters. All other counters are handled using atomic increments
with DEV_STATS_INC().
Let's convert packet stats handling to DSTATS, which has a per-cpu
counter for packet drops too, to avoid the cost of atomic increments
in these cases. Statistics that don't fit DSTATS are still updated
atomically with DEV_STATS_INC().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/7af5c09f3c26f0f231fbe383822ca5d1ce0278fa.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VXLAN uses the TSTATS infrastructure (dev_sw_netstats_*()) for RX and
TX packet counters. It also uses the device core stats
(dev_core_stats_*()) for RX and TX drops.
Let's consolidate that using the DSTATS infrastructure, which can
handle both packet counters and packet drops. Statistics that don't
fit DSTATS are still updated atomically with DEV_STATS_INC().
While there, convert the "len" variable of vxlan_encap_bypass() to
unsigned int, to respect the types of skb->len and
dev_dstats_[rt]x_add().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/145558b184b3cda77911ca5682b6eb83c3ffed8e.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently vrf is the only module that uses NETDEV_PCPU_STAT_DSTATS.
In order to make this kind of statistics available to other modules,
we need to define the update functions in netdevice.h.
Therefore, let's define dev_dstats_*() functions for RX and TX packet
updates (packets, bytes and drops). Use these new functions in vrf.c
instead of vrf_rx_stats() and the other manual counter updates.
While there, update the type of the "len" variables to "unsigned int",
so that there're aligned with both skb->len and the new dstats update
functions.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/d7a552ee382c79f4854e7fcc224cf176cd21150d.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Oleksij Rempel says:
====================
lan78xx: Preparations for PHYlink
This patch set is part of the preparatory work for migrating the lan78xx
USB Ethernet driver to the PHYlink framework. During extensive testing,
I observed that resetting the USB adapter can lead to various read/write
errors. While the errors themselves are acceptable, they generate
excessive log messages, resulting in significant log spam. This set
improves error handling to reduce logging noise by addressing errors
directly and returning early when necessary.
Key highlights of this series include:
- Enhanced error handling to reduce log spam while preserving the
original error values, avoiding unnecessary overwrites.
- Improved error reporting using the `%pe` specifier for better clarity
in log messages.
- Removal of redundant and problematic PHY fixups for LAN8835 and
KSZ9031, with detailed explanations in the respective patches.
- Cleanup of code structure, including unified `goto` labels for better
readability and maintainability, even in simple editors.
====================
Link: https://patch.msgid.link/20241204084142.1152696-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update `lan78xx_dataport_write` and `lan78xx_deferred_multicast_write`
to:
- Handle errors during register read/write operations.
- Exit immediately on errors and log them using `%pe` for clarity.
- Avoid silent failures by propagating error codes properly.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-11-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update `lan78xx_irq_bus_sync_unlock` to handle errors in register
read/write operations. If an error occurs, log it and exit the function
appropriately. This ensures proper handling of failures during IRQ
synchronization.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-10-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve error handling in `lan78xx_set_rx_max_frame_length` by:
- Checking return values from register read/write operations and
propagating errors.
- Exiting immediately on failure to ensure proper error reporting.
In `lan78xx_change_mtu`, log errors when changing MTU fails, using `%pe`
for clear error representation.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-9-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert `lan78xx_init_ltm` to return error codes and handle errors
properly. Previously, errors during the LTM initialization process were
not propagated, potentially leading to undetected issues. This patch
ensures:
- Errors in `lan78xx_read_reg` and `lan78xx_write_reg` are checked and
handled.
- Errors are logged with detailed messages using `%pe` for clarity.
- The function exits immediately on error, returning the error code.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-8-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refine error handling in EEPROM and OTP read/write functions by:
- Return error values immediately upon detection.
- Avoid overwriting correct error codes with `-EIO`.
- Preserve initial error codes as they were appropriate for specific
failures.
- Use `-ETIMEDOUT` for timeout conditions instead of `-EIO`.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-7-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure proper error handling in `lan78xx_mdiobus_read` and
`lan78xx_mdiobus_write` by checking return values of register read/write
operations and returning errors to the caller.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace integer error codes with the `%pe` format specifier in register
read and write error messages. This change provides human-readable error
strings, making logs more informative and debugging easier.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-5-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move following functions to avoid forward declarations in the code:
- lan78xx_start_hw()
- lan78xx_stop_hw()
- lan78xx_flush_fifo()
- lan78xx_start_tx_path()
- lan78xx_stop_tx_path()
- lan78xx_flush_tx_fifo()
- lan78xx_start_rx_path()
- lan78xx_stop_rx_path()
- lan78xx_flush_rx_fifo()
These functions will be used in an upcoming PHYlink migration patch.
No modifications to the functionality of the code are made.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the KSZ9031RNX PHY fixup from the lan78xx driver. The fixup applied
specific RGMII pad skew configurations globally, but these settings violate the
RGMII specification and cause more harm than benefit.
Key issues with the fixup:
1. **Non-Compliant Timing**: The fixup's delay settings fall outside the RGMII
specification requirements of 1.5 ns to 2.0 ns:
- RX Path: Total delay of **2.16 ns** (PHY internal delay of 1.2 ns + 0.96
ns skew).
- TX Path: Total delay of **0.96 ns**, significantly below the RGMII minimum
of 1.5 ns.
2. **Redundant or Incorrect Configurations**:
- The RGMII skew registers written by the fixup do not meaningfully alter
the PHY's default behavior and fail to account for its internal delays.
- The TX_DATA pad skew was not configured, relying on power-on defaults
that are insufficient for RGMII compliance.
3. **Micrel Driver Support**: By setting `PHY_INTERFACE_MODE_RGMII_ID`, the
Micrel driver can calculate and assign appropriate skew values for the
KSZ9031 PHY. This ensures better timing configurations without relying on
external fixups.
4. **System Interference**: The fixup applied globally, reconfiguring all
KSZ9031 PHYs in the system, even those unrelated to the LAN78xx adapter.
This could lead to unintended and harmful behavior on unrelated interfaces.
While the fixup is removed, a better mechanism is still needed to dynamically
determine the optimal combination of PHY and MAC delays to fully meet RGMII
requirements without relying on Device Tree or global fixups. This would allow
for robust operation across different hardware configurations.
The Micrel driver is capable of using the interface mode value to calculate and
apply better skew values, providing a configuration much closer to the RGMII
specification than the fixup. Removing the fixup ensures better default
behavior and prevents harm to other system interfaces.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the PHY fixup for the LAN8835 PHY in the lan78xx driver due to
the following reasons:
- There is no publicly available information about the LAN8835 PHY.
However, it appears to be the integrated PHY used in the LAN7800 and
LAN7850 USB Ethernet controllers. These PHYs use the GMII interface,
not RGMII as configured by the fixup.
- The correct driver for handling the LAN8835 PHY functionality is the
Microchip PHY driver (`drivers/net/phy/microchip.c`), which properly
supports these integrated PHYs.
- The PHY ID `0x0007C130` is actually used by the LAN8742A PHY, which
only supports RMII. This interface is incompatible with the LAN78xx
MAC, as the LAN7801 (the only LAN78xx version without an integrated
PHY) supports only RGMII.
- The mask applied for this fixup is overly broad, inadvertently
covering both Microchip LAN88xx PHYs and unrelated SMSC LAN8742A PHYs,
leading to potential conflicts with other devices.
- Testing has shown that removing this fixup for LAN7800 and LAN7850
does not result in any noticeable difference in functionality, as the
Microchip PHY driver (`drivers/net/phy/microchip.c`) handles all
necessary configurations for these integrated PHYs.
- Registering this fixup globally (not limited to USB devices) risks
conflicts by unintentionally modifying other interfaces whenever a
LAN7801 adapter is connected to the system.
Note that both LAN7800 and LAN7850 USB Ethernet controllers use an
integrated PHY with the ID `0x0007C132`. Additionally, the LAN7515, a
specialized part for Raspberry Pi, includes an integrated LAN7800 USB
Ethernet controller and USB hub in a multifunctional chip design, and it
also uses the same PHY ID (`0x0007C132`).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: phylib EEE cleanups
Clean up phylib's EEE support. Patches previously posted as RFC as part
of the phylink EEE series.
Patch 1 changes the Marvell driver to use the state we store in
struct phy_device, rather than manually calling
phydev->eee_cfg.eee_enabled.
Patch 2 avoids genphy_c45_ethtool_get_eee() setting ->eee_enabled, as
we copy that from phydev->eee_cfg.eee_enabled later, and after patch 3
mo one uses this after calling genphy_c45_ethtool_get_eee(). In fact,
the only caller of this function now is phy_ethtool_get_eee().
As all callers to genphy_c45_eee_is_active() now pass NULL as its
is_enabled flag, this is no longer useful. Remove the argument in
patch 3.
Patch 4 updates the phylib documentation to make it absolutely clear
that phy_ethtool_get_eee() now fills in all members of struct
ethtool_keee, which is why we now have so many buggy network drivers.
====================
Link: https://patch.msgid.link/Z1GDZlFyF2fsFa3S@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the phy_ethtool_get_eee() documentation to make it clear that
all members of struct ethtool_keee are written by this function.
keee.supported, keee.advertised, keee.lp_advertised and keee.eee_active
are all written by genphy_c45_ethtool_get_eee().
keee.tx_lpi_timer, keee.tx_lpi_enabled and keee.eee_enabled are all
written by eeecfg_to_eee().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tJ9JH-006LIz-SO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers to genphy_c45_eee_is_active() now pass NULL as the
is_enabled argument, which means we never use the value computed
in this function. Remove the argument and clean up this function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/E1tJ9JC-006LIt-Ne@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_ethtool_get_eee() is only called from phy_ethtool_get_eee(),
which then calls eeecfg_to_eee(). eeecfg_to_eee() will overwrite
keee.eee_enabled, so there's no point setting keee.eee_enabled in
genphy_c45_ethtool_get_eee(). Remove this assignment.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/E1tJ9J7-006LIn-Jr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than calling genphy_c45_ethtool_get_eee() to retrieve whether
EEE is enabled, use the value stored in the phy_device eee_cfg
structure.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/E1tJ9J2-006LIh-Fl@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ilya reported a slab-use-after-free in dst_destroy [1]
Issue is in xfrm6_net_init() and xfrm4_net_init() :
They copy xfrm[46]_dst_ops_template into net->xfrm.xfrm[46]_dst_ops.
But net structure might be freed before all the dst callbacks are
called. So when dst_destroy() calls later :
if (dst->ops->destroy)
dst->ops->destroy(dst);
dst->ops points to the old net->xfrm.xfrm[46]_dst_ops, which has been freed.
See a relevant issue fixed in :
ac888d58869b ("net: do not delay dst_entries_add() in dst_release()")
A fix is to queue the 'struct net' to be freed after one
another cleanup_net() round (and existing rcu_barrier())
[1]
BUG: KASAN: slab-use-after-free in dst_destroy (net/core/dst.c:112)
Read of size 8 at addr ffff8882137ccab0 by task swapper/37/0
Dec 03 05:46:18 kernel:
CPU: 37 UID: 0 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 6.12.0 #67
Hardware name: Red Hat KVM/RHEL, BIOS 1.16.1-1.el9 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:124)
print_address_description.constprop.0 (mm/kasan/report.c:378)
? dst_destroy (net/core/dst.c:112)
print_report (mm/kasan/report.c:489)
? dst_destroy (net/core/dst.c:112)
? kasan_addr_to_slab (mm/kasan/common.c:37)
kasan_report (mm/kasan/report.c:603)
? dst_destroy (net/core/dst.c:112)
? rcu_do_batch (kernel/rcu/tree.c:2567)
dst_destroy (net/core/dst.c:112)
rcu_do_batch (kernel/rcu/tree.c:2567)
? __pfx_rcu_do_batch (kernel/rcu/tree.c:2491)
? lockdep_hardirqs_on_prepare (kernel/locking/lockdep.c:4339 kernel/locking/lockdep.c:4406)
rcu_core (kernel/rcu/tree.c:2825)
handle_softirqs (kernel/softirq.c:554)
__irq_exit_rcu (kernel/softirq.c:589 kernel/softirq.c:428 kernel/softirq.c:637)
irq_exit_rcu (kernel/softirq.c:651)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1049 arch/x86/kernel/apic/apic.c:1049)
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702)
RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:743)
Code: 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 6e ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 0f 00 2d c7 c9 27 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90
RSP: 0018:ffff888100d2fe00 EFLAGS: 00000246
RAX: 00000000001870ed RBX: 1ffff110201a5fc2 RCX: ffffffffb61a3e46
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffb3d4d123
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed11c7e1835d
R10: ffff888e3f0c1aeb R11: 0000000000000000 R12: 0000000000000000
R13: ffff888100d20000 R14: dffffc0000000000 R15: 0000000000000000
? ct_kernel_exit.constprop.0 (kernel/context_tracking.c:148)
? cpuidle_idle_call (kernel/sched/idle.c:186)
default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118)
cpuidle_idle_call (kernel/sched/idle.c:186)
? __pfx_cpuidle_idle_call (kernel/sched/idle.c:168)
? lock_release (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5848)
? lockdep_hardirqs_on_prepare (kernel/locking/lockdep.c:4347 kernel/locking/lockdep.c:4406)
? tsc_verify_tsc_adjust (arch/x86/kernel/tsc_sync.c:59)
do_idle (kernel/sched/idle.c:326)
cpu_startup_entry (kernel/sched/idle.c:423 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:202 arch/x86/kernel/smpboot.c:282)
? __pfx_start_secondary (arch/x86/kernel/smpboot.c:232)
? soft_restart_cpu (arch/x86/kernel/head_64.S:452)
common_startup_64 (arch/x86/kernel/head_64.S:414)
</TASK>
Dec 03 05:46:18 kernel:
Allocated by task 12184:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (./arch/x86/include/asm/current.h:49 mm/kasan/common.c:60 mm/kasan/common.c:69)
__kasan_slab_alloc (mm/kasan/common.c:319 mm/kasan/common.c:345)
kmem_cache_alloc_noprof (mm/slub.c:4085 mm/slub.c:4134 mm/slub.c:4141)
copy_net_ns (net/core/net_namespace.c:421 net/core/net_namespace.c:480)
create_new_namespaces (kernel/nsproxy.c:110)
unshare_nsproxy_namespaces (kernel/nsproxy.c:228 (discriminator 4))
ksys_unshare (kernel/fork.c:3313)
__x64_sys_unshare (kernel/fork.c:3382)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Dec 03 05:46:18 kernel:
Freed by task 11:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (./arch/x86/include/asm/current.h:49 mm/kasan/common.c:60 mm/kasan/common.c:69)
kasan_save_free_info (mm/kasan/generic.c:582)
__kasan_slab_free (mm/kasan/common.c:271)
kmem_cache_free (mm/slub.c:4579 mm/slub.c:4681)
cleanup_net (net/core/net_namespace.c:456 net/core/net_namespace.c:446 net/core/net_namespace.c:647)
process_one_work (kernel/workqueue.c:3229)
worker_thread (kernel/workqueue.c:3304 kernel/workqueue.c:3391)
kthread (kernel/kthread.c:389)
ret_from_fork (arch/x86/kernel/process.c:147)
ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
Dec 03 05:46:18 kernel:
Last potentially related work creation:
kasan_save_stack (mm/kasan/common.c:48)
__kasan_record_aux_stack (mm/kasan/generic.c:541)
insert_work (./include/linux/instrumented.h:68 ./include/asm-generic/bitops/instrumented-non-atomic.h:141 kernel/workqueue.c:788 kernel/workqueue.c:795 kernel/workqueue.c:2186)
__queue_work (kernel/workqueue.c:2340)
queue_work_on (kernel/workqueue.c:2391)
xfrm_policy_insert (net/xfrm/xfrm_policy.c:1610)
xfrm_add_policy (net/xfrm/xfrm_user.c:2116)
xfrm_user_rcv_msg (net/xfrm/xfrm_user.c:3321)
netlink_rcv_skb (net/netlink/af_netlink.c:2536)
xfrm_netlink_rcv (net/xfrm/xfrm_user.c:3344)
netlink_unicast (net/netlink/af_netlink.c:1316 net/netlink/af_netlink.c:1342)
netlink_sendmsg (net/netlink/af_netlink.c:1886)
sock_write_iter (net/socket.c:729 net/socket.c:744 net/socket.c:1165)
vfs_write (fs/read_write.c:590 fs/read_write.c:683)
ksys_write (fs/read_write.c:736)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Dec 03 05:46:18 kernel:
Second to last potentially related work creation:
kasan_save_stack (mm/kasan/common.c:48)
__kasan_record_aux_stack (mm/kasan/generic.c:541)
insert_work (./include/linux/instrumented.h:68 ./include/asm-generic/bitops/instrumented-non-atomic.h:141 kernel/workqueue.c:788 kernel/workqueue.c:795 kernel/workqueue.c:2186)
__queue_work (kernel/workqueue.c:2340)
queue_work_on (kernel/workqueue.c:2391)
__xfrm_state_insert (./include/linux/workqueue.h:723 net/xfrm/xfrm_state.c:1150 net/xfrm/xfrm_state.c:1145 net/xfrm/xfrm_state.c:1513)
xfrm_state_update (./include/linux/spinlock.h:396 net/xfrm/xfrm_state.c:1940)
xfrm_add_sa (net/xfrm/xfrm_user.c:912)
xfrm_user_rcv_msg (net/xfrm/xfrm_user.c:3321)
netlink_rcv_skb (net/netlink/af_netlink.c:2536)
xfrm_netlink_rcv (net/xfrm/xfrm_user.c:3344)
netlink_unicast (net/netlink/af_netlink.c:1316 net/netlink/af_netlink.c:1342)
netlink_sendmsg (net/netlink/af_netlink.c:1886)
sock_write_iter (net/socket.c:729 net/socket.c:744 net/socket.c:1165)
vfs_write (fs/read_write.c:590 fs/read_write.c:683)
ksys_write (fs/read_write.c:736)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Fixes: a8a572a6b5f2 ("xfrm: dst_entries_init() per-net dst_ops")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Closes: https://lore.kernel.org/netdev/CANn89iKKYDVpB=MtmfH7nyv2p=rJWSLedO5k7wSZgtY_tO8WQg@mail.gmail.com/T/#m02c98c3009fe66382b73cfb4db9cf1df6fab3fbf
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241204125455.3871859-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is unclear if net/lapb code is supposed to be ready for 8021q.
We can at least avoid crashes like the following :
skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282
RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600
RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000
RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60
R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140
R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016
FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_push+0xe5/0x100 net/core/skbuff.c:2636
nr_header+0x36/0x320 net/netrom/nr_dev.c:69
dev_hard_header include/linux/netdevice.h:3148 [inline]
vlan_dev_hard_header+0x359/0x480 net/8021q/vlan_dev.c:83
dev_hard_header include/linux/netdevice.h:3148 [inline]
lapbeth_data_transmit+0x1f6/0x2a0 drivers/net/wan/lapbether.c:257
lapb_data_transmit+0x91/0xb0 net/lapb/lapb_iface.c:447
lapb_transmit_buffer+0x168/0x1f0 net/lapb/lapb_out.c:149
lapb_establish_data_link+0x84/0xd0
lapb_device_event+0x4e0/0x670
notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93
__dev_notify_flags+0x207/0x400
dev_change_flags+0xf0/0x1a0 net/core/dev.c:8922
devinet_ioctl+0xa4e/0x1aa0 net/ipv4/devinet.c:1188
inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1003
sock_do_ioctl+0x158/0x460 net/socket.c:1227
sock_ioctl+0x626/0x8e0 net/socket.c:1346
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+fb99d1b0c0f81d94a5e2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67506220.050a0220.17bd51.006c.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241204141031.4030267-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix various integer type conversions by using strtoull and a temporary
variable which is bounds checked before being casted into the
appropriate cfg_* variable for use by the test program.
While here:
- free the strdup'd cfg string for overall hygenie.
- initialize napi_id = 0 in setup_queue to avoid warnings on some
compilers.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204163239.294123-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tipc_exit_net() is very slow and is abused by syzbot.
tipc_nametbl_stop() is called for each netns being dismantled.
Calling synchronize_net() right before freeing tn->nametbl
is a big hammer.
Replace this with kfree_rcu().
Note that RCU is not properly used here, otherwise
tn->nametbl should be cleared before the synchronize_net()
or kfree_rcu(), or even before the cleanup loop.
We might need to fix this at some point.
Also note tipc uses other synchronize_rcu() calls,
more work is needed to make tipc_exit_net() much faster.
List of remaining calls to synchronize_rcu()
tipc_detach_loopback() (dev_remove_pack())
tipc_bcast_stop()
tipc_sk_rht_destroy()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241204210234.319484-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes
There are 2 bug fixes in this series. This first one fixes the issue
of setting the gso_type incorrectly for HW GRO packets on 5750X (Thor)
chips. This can cause HW GRO packets to be dropped by the stack if
they are re-segmented. The second one fixes a potential division by
zero crash when dumping FW log coredump.
====================
Link: https://patch.msgid.link/20241204215918.1692597-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the FW log context memory is retained after FW reset, the existing
code is not handling the condition correctly and zeroes out the data
structures. This potentially will cause a division by zero crash
when the user runs ethtool -w. The last_type is also not set
correctly when the context memory is retained. This will cause errors
because the last_type signals to the FW that all context memory types
have been configured.
Oops: divide error: 0000 1 PREEMPT SMP NOPTI
CPU: 53 UID: 0 PID: 7019 Comm: ethtool Kdump: loaded Tainted: G OE 6.12.0-rc7+ #1
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Supermicro SYS-621C-TN12R/X13DDW-A, BIOS 1.4 08/10/2023
RIP: 0010:__bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
Code: 0a 31 d2 4c 89 6c 24 10 45 8b a5 fc df ff ff 4c 8b 74 24 20 31 db 66 89 44 24 06 48 63 c5 c1 e5 09 4c 0f af e0 48 8b 44 24 30 <49> f7 f4 4c 89 64 24 08 48 63 c5 4d 89 ec 31 ed 48 89 44 24 18 49
RSP: 0018:ff480591603d78b8 EFLAGS: 00010206
RAX: 0000000000100000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ff23959e46740000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000100000 R09: ff23959e46740000
R10: ff480591603d7a18 R11: 0000000000000010 R12: 0000000000000000
R13: ff23959e46742008 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f04227c1740(0000) GS:ff2395adbf680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f04225b33a5 CR3: 000000108b9a4001 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? die+0x33/0x90
? do_trap+0xd9/0x100
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
? do_error_trap+0x65/0x80
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
? exc_divide_error+0x36/0x50
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
? asm_exc_divide_error+0x16/0x20
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0xda/0x160 [bnxt_en]
bnxt_get_ctx_coredump.constprop.0+0x1ed/0x390 [bnxt_en]
? __memcg_slab_post_alloc_hook+0x21c/0x3c0
? __bnxt_get_coredump+0x473/0x4b0 [bnxt_en]
__bnxt_get_coredump+0x473/0x4b0 [bnxt_en]
? security_file_alloc+0x74/0xe0
? cred_has_capability.isra.0+0x78/0x120
bnxt_get_coredump_length+0x4b/0xf0 [bnxt_en]
bnxt_get_dump_flag+0x40/0x60 [bnxt_en]
__dev_ethtool+0x17e4/0x1fc0
? syscall_exit_to_user_mode+0xc/0x1d0
? do_syscall_64+0x85/0x150
? unmap_page_range+0x299/0x4b0
? vma_interval_tree_remove+0x215/0x2c0
? __kmalloc_cache_noprof+0x10a/0x300
dev_ethtool+0xa8/0x170
dev_ioctl+0x1b5/0x580
? sk_ioctl+0x4a/0x110
sock_do_ioctl+0xab/0xf0
sock_ioctl+0x1ca/0x2e0
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x79/0x150
Fixes: 24d694aec139 ("bnxt_en: Allocate backing store memory for FW trace logs")
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204215918.1692597-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
