| Age | Commit message (Collapse) | Author |
|---|
|
A recent refactoring was identified by smatch to cause another potential NULL
dereference:
drivers/net/wireless/st/cw1200/cw1200_spi.c:440 cw1200_spi_disconnect() error: we previously assumed 'self' could be null (see line 433)
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202411271742.Xa7CNVh1-lkp@intel.com/
Fixes: 2719a9e7156c ("wifi: cw1200: Convert to GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241217-cw1200-fix-v1-1-911e6b5823ec@linaro.org
|
|
Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
accessing job->base.sched can produce unexpected results as the initialisation
of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the
memset.
This commit fixes an issue when a CS would fail validation and would
be rejected after job->num_ibs is incremented. In this case,
amdgpu_ib_free(ring->adev, ...) will be called, which would crash the
machine because the ring value is bogus.
To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this
because the device is actually not used in this function.
The next commit will remove the ring argument completely.
Fixes: 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7)
|
|
If the kernel hasn't been compiled with PCIe hotplug support this
can lead to problems with dGPUs that use BOCO because they effectively
drop off the bus.
To prevent issues, disable BOCO support when compiled without PCIe hotplug.
Reported-by: Gabriel Marcano <gabemarcano@yahoo.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707#note_2696862
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20241211155601.3585256-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ad5bdc28bafa66db0f041cc6cdd278a80426aae)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Various fixes to Hyper-V tools in the kernel tree (Dexuan Cui, Olaf
Hering, Vitaly Kuznetsov)
- Fix a bug in the Hyper-V TSC page based sched_clock() (Naman Jain)
- Two bug fixes in the Hyper-V utility functions (Michael Kelley)
- Convert open-coded timeouts to secs_to_jiffies() in Hyper-V drivers
(Easwar Hariharan)
* tag 'hyperv-fixes-signed-20241217' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: reduce resource usage in hv_kvp_daemon
tools/hv: add a .gitignore file
tools/hv: reduce resouce usage in hv_get_dns_info helper
hv/hv_kvp_daemon: Pass NIC name to hv_get_dns_info as well
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet
Drivers: hv: util: Don't force error code to ENODEV in util_probe()
tools/hv: terminate fcopy daemon if read from uio fails
drivers: hv: Convert open-coded timeouts to secs_to_jiffies()
tools: hv: change permissions of NetworkManager configuration file
x86/hyperv: Fix hv tsc page based sched_clock for hibernation
tools: hv: Fix a complier warning in the fcopy uio daemon
|
|
In 32-bit x86 builds CONFIG_STATIC_CALL_INLINE isn't set, leading to
static_call_initialized not being available.
Define it as "0" in that case.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Both struct cfg80211_wowlan_nd_match and struct cfg80211_wowlan_nd_info
pre-allocate space for channels and matches, but then may end up using
fewer that the full allocation. Shrink the associated counter
(n_channels and n_matches) after counting the results. This avoids
compile-time (and run-time) warnings from __counted_by. (The counter
member needs to be updated _before_ accessing the array index.)
Seen with coming GCC 15:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function 'iwl_mvm_query_set_freqs':
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2877:66: warning: operation on 'match->n_channels' may be undefined [-Wsequence-point]
2877 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2885:66: warning: operation on 'match->n_channels' may be undefined [-Wsequence-point]
2885 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function 'iwl_mvm_query_netdetect_reasons':
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2982:58: warning: operation on 'net_detect->n_matches' may be undefined [-Wsequence-point]
2982 | net_detect->matches[net_detect->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~^~
Cc: stable@vger.kernel.org
Fixes: aa4ec06c455d ("wifi: cfg80211: use __counted_by where appropriate")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20240619211233.work.355-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix error in remove progress:
[ 43.026148] Call trace:
[ 43.026370] klist_next+0x1c/0x1d4
[ 43.026671] device_for_each_child+0x48/0xac
[ 43.027049] spi_unregister_controller+0x30/0x130
[ 43.027469] rockchip_sfc_remove+0x48/0x80 [spi_rockchip_sfc]
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://patch.msgid.link/20241218154741.901591-1-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate driver fixes for 6.13-rc4 from Mario Liminciello:
"Fix a problem where systems without preferred cores were
misdetecting preferred cores.
Fix issues with with boost numerator handling leading to
inconsistently programmed CPPC max performance values."
* tag 'amd-pstate-v6.13-2024-12-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies
cpufreq/amd-pstate: Store the boost numerator as highest perf again
cpufreq/amd-pstate: Detect preferred core support before driver registration
|
|
If the 'hctx' isn't removed from cpuhp callback list, we can't reuse it,
otherwise use-after-free may be triggered.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202412172217.b906db7c-lkp@intel.com
Tested-by: kernel test robot <oliver.sang@intel.com>
Fixes: 22465bbac53c ("blk-mq: move cpuhp callback registering out of q->sysfs_lock")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241218101617.3275704-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
acquiring sysfs_lock"
This reverts commit be26ba96421ab0a8fa2055ccf7db7832a13c44d2.
Commit be26ba96421a ("block: Fix potential deadlock while freezing queue and
acquiring sysfs_loc") actually reverts commit 22465bbac53c ("blk-mq: move cpuhp
callback registering out of q->sysfs_lock"), and causes the original resctrl
lockdep warning.
So revert it and we need to fix the issue in another way.
Cc: Nilay Shroff <nilay@linux.ibm.com>
Fixes: be26ba96421a ("block: Fix potential deadlock while freezing queue and acquiring sysfs_loc")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241218101617.3275704-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer already has support to validates proper block sizes
with blk_validate_block_size(), we can leverage that as well.
No functional changes.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241218020212.3657139-3-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We already have a helper for checking the limits on the block size
both low and high, just use that.
No functional changes.
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241218020212.3657139-2-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The calibration procedure needs some time to finish.
This patch adds the delay time to ensure the calibration procedure is completed correctly.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20241218091307.96656-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current implementation does not work if the thermal zone is
interrupt driven only.
The boundaries are not correctly checked and computed as it happens
only when the temperature is increasing or decreasing.
The problem arises because the routine to detect when we cross a
threshold is correlated with the computation of the boundaries. We
assume we have to recompute the boundaries when a threshold is crossed
but actually we should do that even if the it is not the case.
Mixing the boundaries computation and the threshold detection for the
sake of optimizing the routine is much more complex as it appears
intuitively and prone to errors.
This fix separates the boundaries computation and the threshold
crossing detection into different routines. The result is a code much
more simple to understand, thus easier to maintain.
The drawback is we browse the thresholds list several time but we can
consider that as neglictible because that happens when the temperature
is updated. There are certainly some aeras to improve in the
temperature update routine but it would be not adequate as this change
aims to fix the thresholds for v6.13.
Fixes: 445936f9e258 ("thermal: core: Add user thresholds support")
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # rock5b, Lenovo x13s
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20241216212644.1145122-1-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
linux-hippi is bouncing with:
<linux-hippi@sunsite.dk>:
Sorry, no mailbox here by that name. (#5.1.1)
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
wait_for_complete_timeout() expects a timeout in jiffies. With the
driver, some call sites converted QCA8K_ETHERNET_TIMEOUT to jiffies,
others did not. Make the code consistent by changes the #define to
include a call to msecs_to_jiffies, and remove all other calls to
msecs_to_jiffies.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: from Christian would be very welcome.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the timer supports complementary output, the CCxNE bit must be set
additionally to the CCxE bit. So to not overwrite the latter use |=
instead of = to set the former.
Fixes: deaba9cff809 ("pwm: stm32: Implementation of the waveform callbacks")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20241217150021.2030213-1-fabrice.gasnier@foss.st.com
[ukleinek: Slightly improve commit log]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The mapping VMA address is saved in VAS window struct when the
paste address is mapped. This VMA address is used during migration
to unmap the paste address if the window is active. The paste
address mapping will be removed when the window is closed or with
the munmap(). But the VMA address in the VAS window is not updated
with munmap() which is causing invalid access during migration.
The KASAN report shows:
[16386.254991] BUG: KASAN: slab-use-after-free in reconfig_close_windows+0x1a0/0x4e8
[16386.255043] Read of size 8 at addr c00000014a819670 by task drmgr/696928
[16386.255096] CPU: 29 UID: 0 PID: 696928 Comm: drmgr Kdump: loaded Tainted: G B 6.11.0-rc5-nxgzip #2
[16386.255128] Tainted: [B]=BAD_PAGE
[16386.255148] Hardware name: IBM,9080-HEX Power11 (architected) 0x820200 0xf000007 of:IBM,FW1110.00 (NH1110_016) hv:phyp pSeries
[16386.255181] Call Trace:
[16386.255202] [c00000016b297660] [c0000000018ad0ac] dump_stack_lvl+0x84/0xe8 (unreliable)
[16386.255246] [c00000016b297690] [c0000000006e8a90] print_report+0x19c/0x764
[16386.255285] [c00000016b297760] [c0000000006e9490] kasan_report+0x128/0x1f8
[16386.255309] [c00000016b297880] [c0000000006eb5c8] __asan_load8+0xac/0xe0
[16386.255326] [c00000016b2978a0] [c00000000013f898] reconfig_close_windows+0x1a0/0x4e8
[16386.255343] [c00000016b297990] [c000000000140e58] vas_migration_handler+0x3a4/0x3fc
[16386.255368] [c00000016b297a90] [c000000000128848] pseries_migrate_partition+0x4c/0x4c4
...
[16386.256136] Allocated by task 696554 on cpu 31 at 16377.277618s:
[16386.256149] kasan_save_stack+0x34/0x68
[16386.256163] kasan_save_track+0x34/0x80
[16386.256175] kasan_save_alloc_info+0x58/0x74
[16386.256196] __kasan_slab_alloc+0xb8/0xdc
[16386.256209] kmem_cache_alloc_noprof+0x200/0x3d0
[16386.256225] vm_area_alloc+0x44/0x150
[16386.256245] mmap_region+0x214/0x10c4
[16386.256265] do_mmap+0x5fc/0x750
[16386.256277] vm_mmap_pgoff+0x14c/0x24c
[16386.256292] ksys_mmap_pgoff+0x20c/0x348
[16386.256303] sys_mmap+0xd0/0x160
...
[16386.256350] Freed by task 0 on cpu 31 at 16386.204848s:
[16386.256363] kasan_save_stack+0x34/0x68
[16386.256374] kasan_save_track+0x34/0x80
[16386.256384] kasan_save_free_info+0x64/0x10c
[16386.256396] __kasan_slab_free+0x120/0x204
[16386.256415] kmem_cache_free+0x128/0x450
[16386.256428] vm_area_free_rcu_cb+0xa8/0xd8
[16386.256441] rcu_do_batch+0x2c8/0xcf0
[16386.256458] rcu_core+0x378/0x3c4
[16386.256473] handle_softirqs+0x20c/0x60c
[16386.256495] do_softirq_own_stack+0x6c/0x88
[16386.256509] do_softirq_own_stack+0x58/0x88
[16386.256521] __irq_exit_rcu+0x1a4/0x20c
[16386.256533] irq_exit+0x20/0x38
[16386.256544] interrupt_async_exit_prepare.constprop.0+0x18/0x2c
...
[16386.256717] Last potentially related work creation:
[16386.256729] kasan_save_stack+0x34/0x68
[16386.256741] __kasan_record_aux_stack+0xcc/0x12c
[16386.256753] __call_rcu_common.constprop.0+0x94/0xd04
[16386.256766] vm_area_free+0x28/0x3c
[16386.256778] remove_vma+0xf4/0x114
[16386.256797] do_vmi_align_munmap.constprop.0+0x684/0x870
[16386.256811] __vm_munmap+0xe0/0x1f8
[16386.256821] sys_munmap+0x54/0x6c
[16386.256830] system_call_exception+0x1a0/0x4a0
[16386.256841] system_call_vectored_common+0x15c/0x2ec
[16386.256868] The buggy address belongs to the object at c00000014a819670
which belongs to the cache vm_area_struct of size 168
[16386.256887] The buggy address is located 0 bytes inside of
freed 168-byte region [c00000014a819670, c00000014a819718)
[16386.256915] The buggy address belongs to the physical page:
[16386.256928] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a81
[16386.256950] memcg:c0000000ba430001
[16386.256961] anon flags: 0x43ffff800000000(node=4|zone=0|lastcpupid=0x7ffff)
[16386.256975] page_type: 0xfdffffff(slab)
[16386.256990] raw: 043ffff800000000 c00000000501c080 0000000000000000 5deadbee00000001
[16386.257003] raw: 0000000000000000 00000000011a011a 00000001fdffffff c0000000ba430001
[16386.257018] page dumped because: kasan: bad access detected
This patch adds close() callback in vas_vm_ops vm_operations_struct
which will be executed during munmap() before freeing VMA. The VMA
address in the VAS window is set to NULL after holding the window
mmap_mutex.
Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241214051758.997759-1-haren@linux.ibm.com
|
|
This series fixes problems in the m_can_pci driver found on the Intel
Elkhart Lake processor.
Link: https://patch.msgid.link/e247f331cb72829fcbdfda74f31a59cbad1a6006.1728288535.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The interrupt line of PCI devices is interpreted as edge-triggered,
however the interrupt signal of the m_can controller integrated in Intel
Elkhart Lake CPUs appears to be generated level-triggered.
Consider the following sequence of events:
- IR register is read, interrupt X is set
- A new interrupt Y is triggered in the m_can controller
- IR register is written to acknowledge interrupt X. Y remains set in IR
As at no point in this sequence no interrupt flag is set in IR, the
m_can interrupt line will never become deasserted, and no edge will ever
be observed to trigger another run of the ISR. This was observed to
result in the TX queue of the EHL m_can to get stuck under high load,
because frames were queued to the hardware in m_can_start_xmit(), but
m_can_finish_tx() was never run to account for their successful
transmission.
On an Elkhart Lake based board with the two CAN interfaces connected to
each other, the following script can reproduce the issue:
ip link set can0 up type can bitrate 1000000
ip link set can1 up type can bitrate 1000000
cangen can0 -g 2 -I 000 -L 8 &
cangen can0 -g 2 -I 001 -L 8 &
cangen can0 -g 2 -I 002 -L 8 &
cangen can0 -g 2 -I 003 -L 8 &
cangen can0 -g 2 -I 004 -L 8 &
cangen can0 -g 2 -I 005 -L 8 &
cangen can0 -g 2 -I 006 -L 8 &
cangen can0 -g 2 -I 007 -L 8 &
cangen can1 -g 2 -I 100 -L 8 &
cangen can1 -g 2 -I 101 -L 8 &
cangen can1 -g 2 -I 102 -L 8 &
cangen can1 -g 2 -I 103 -L 8 &
cangen can1 -g 2 -I 104 -L 8 &
cangen can1 -g 2 -I 105 -L 8 &
cangen can1 -g 2 -I 106 -L 8 &
cangen can1 -g 2 -I 107 -L 8 &
stress-ng --matrix 0 &
To fix the issue, repeatedly read and acknowledge interrupts at the
start of the ISR until no interrupt flags are set, so the next incoming
interrupt will also result in an edge on the interrupt line.
While we have received a report that even with this patch, the TX queue
can become stuck under certain (currently unknown) circumstances on the
Elkhart Lake, this patch completely fixes the issue with the above
reproducer, and it is unclear whether the remaining issue has a similar
cause at all.
Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/fdf0439c51bcb3a46c21e9fb21c7f1d06363be84.1728288535.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
While an m_can controller usually already has the init flag from a
hardware reset, no such reset happens on the integrated m_can_pci of the
Intel Elkhart Lake. If the CAN controller is found in an active state,
m_can_dev_setup() would fail because m_can_niso_supported() calls
m_can_cccr_update_bits(), which refuses to modify any other configuration
bits when CCCR_INIT is not set.
To avoid this issue, set CCCR_INIT before attempting to modify any other
configuration flags.
Fixes: cd5a46ce6fa6 ("can: m_can: don't enable transceiver when probing")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/e247f331cb72829fcbdfda74f31a59cbad1a6006.1728288535.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Jijie Shao says:
====================
Support some features for the HIBMCGE driver
In this patch series, The HIBMCGE driver implements some functions
such as dump register, unicast MAC address filtering, debugfs and reset.
====================
Link: https://patch.msgid.link/20241216040532.1566229-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add nway_reset supported in this module
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216040532.1566229-8-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sometimes, if the port doesn't work, we can try to fix it by resetting it.
This patch supports reset triggered by ethtool or FLR of PCIe, For example:
ethtool --reset eth0 dedicated
echo 1 > /sys/bus/pci/devices/0000\:83\:00.1/reset
We hope that the reset can be performed only when the port is down,
and the port cannot be up during the reset.
Therefore, the entire reset process is protected by the rtnl lock.
After the reset is complete, the hardware registers are restored
to their default values. Therefore, some rebuild operations are
required to rewrite the user configuration to the registers.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MAC can automatically send or respond to pause frames.
This patch supports the function of enabling pause frames
by using ethtool.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216040532.1566229-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dump register is an effective way to analyze problems.
To ensure code flexibility, each register contains the type,
offset, and value information. The ethtool does the pretty print
based on these information.
The driver can dynamically add or delete registers that need to be dumped
in the future because information such as type and offset is contained.
ethtool always can do pretty print.
With the ethtool of a specific version,
the following effects are achieved:
[root@localhost sjj]# ./ethtool -d enp131s0f1
[SPEC] VALID [0x0000]: 0x00000001
[SPEC] EVENT_REQ [0x0004]: 0x00000000
[SPEC] MAC_ID [0x0008]: 0x00000002
[SPEC] PHY_ADDR [0x000c]: 0x00000002
[SPEC] MAC_ADDR_L [0x0010]: 0x00000808
[SPEC] MAC_ADDR_H [0x0014]: 0x08080802
[SPEC] UC_MAX_NUM [0x0018]: 0x00000004
[SPEC] MAX_MTU [0x0028]: 0x00000fc2
[SPEC] MIN_MTU [0x002c]: 0x00000100
[SPEC] TX_FIFO_NUM [0x0030]: 0x00000040
[SPEC] RX_FIFO_NUM [0x0034]: 0x0000007f
[SPEC] VLAN_LAYERS [0x0038]: 0x00000002
[MDIO] COMMAND_REG [0x0000]: 0x0000185f
[MDIO] ADDR_REG [0x0004]: 0x00000000
[MDIO] WDATA_REG [0x0008]: 0x0000a000
[MDIO] RDATA_REG [0x000c]: 0x00000000
[MDIO] STA_REG [0x0010]: 0x00000000
[GMAC] DUPLEX_TYPE [0x0008]: 0x00000001
[GMAC] FD_FC_TYPE [0x000c]: 0x00008808
[GMAC] FC_TX_TIMER [0x001c]: 0x000000ff
[GMAC] FD_FC_ADDR_LOW [0x0020]: 0xc2000001
[GMAC] FD_FC_ADDR_HIGH [0x0024]: 0x00000180
[GMAC] MAX_FRM_SIZE [0x003c]: 0x000005f6
[GMAC] PORT_MODE [0x0040]: 0x00000002
[GMAC] PORT_EN [0x0044]: 0x00000006
...
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MAC supports filtering unmatched unicast packets according to
the MAC address table. This patch adds the support for
unicast frame filtering.
To support automatic restoration of MAC entries
after reset, the driver saves a copy of MAC entries in the driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20241216040532.1566229-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
the driver requested three interrupts: "tx", "rx", "err".
The err interrupt is a summary interrupt. We distinguish
different errors based on the status register and mask.
With "cat /proc/interrupts | grep hibmcge",
we can't distinguish the detailed cause of the error,
so we added this file to debugfs.
the following effects are achieved:
[root@localhost sjj]# cat /sys/kernel/debug/hibmcge/0000\:83\:00.1/irq_info
RX : enabled: true , logged: false, count: 0
TX : enabled: true , logged: false, count: 0
MAC_MII_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_PCS_RX_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_PCS_TX_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_APP_RX_FIFO_ERR : enabled: false, logged: true , count: 0
MAC_APP_TX_FIFO_ERR : enabled: false, logged: true , count: 0
SRAM_PARITY_ERR : enabled: true , logged: true , count: 0
TX_AHB_ERR : enabled: true , logged: true , count: 0
RX_BUF_AVL : enabled: true , logged: false, count: 0
REL_BUF_ERR : enabled: true , logged: true , count: 0
TXCFG_AVL : enabled: true , logged: false, count: 0
TX_DROP : enabled: true , logged: false, count: 0
RX_DROP : enabled: true , logged: false, count: 0
RX_AHB_ERR : enabled: true , logged: true , count: 0
MAC_FIFO_ERR : enabled: true , logged: false, count: 0
RBREQ_ERR : enabled: true , logged: false, count: 0
WE_ERR : enabled: true , logged: false, count: 0
The irq framework of hibmcge driver also includes tx/rx interrupts.
Therefore, TX and RX are not moved separately form this file.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch initializes debugfs and creates root directory
for each device. The tx_ring and rx_ring debugfs files
are implemented together.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Oleksij Rempel says:
====================
lan78xx: Preparations for PHYlink
This patch set is a third part of the preparatory work for migrating
the lan78xx USB Ethernet driver to the PHYlink framework. During
extensive testing, I observed that resetting the USB adapter can lead to
various read/write errors. While the errors themselves are acceptable,
they generate excessive log messages, resulting in significant log spam.
This set improves error handling to reduce logging noise by addressing
errors directly and returning early when necessary.
====================
Link: https://patch.msgid.link/20241216120941.1690908-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enhance error handling in Wake-on-LAN (WoL) operations:
- Log a warning in `lan78xx_get_wol` if `lan78xx_read_reg` fails.
- Check and handle errors from `device_set_wakeup_enable` and
`phy_ethtool_set_wol` in `lan78xx_set_wol`.
- Ensure proper cleanup with a unified error handling path.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216120941.1690908-7-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove PHY register handling from `lan78xx_get_regs` and
`lan78xx_get_regs_len`. Since the controller can have different PHYs
attached, the first 32 registers are not universally relevant or the
most interesting. Simplify the implementation to focus on MAC and device
registers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241216120941.1690908-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename `phy_mutex` to `mdiobus_mutex` for clarity, as the mutex protects
MDIO bus access rather than PHY-specific operations. Update all
references to ensure consistency.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241216120941.1690908-5-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename the generic `done` label to the action-specific `exit_unlock`
label in `lan78xx_mac_reset`. This improves clarity by indicating the
specific cleanup action (mutex unlock) and aligns with best practices
for error handling and cleanup labels.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20241216120941.1690908-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update lan78xx_stop_hw to return -ETIMEDOUT instead of -ETIME when
a timeout occurs. While -ETIME indicates a general timer expiration,
-ETIMEDOUT is more commonly used for signaling operation timeouts and
provides better consistency with standard error handling in the driver.
The -ETIME checks in tx_complete() and rx_complete() are unrelated to
this error handling change. In these functions, the error values are derived
from urb->status, which reflects USB transfer errors. The error value from
lan78xx_stop_hw will be exposed in the following cases:
- usb_driver::suspend
- net_device_ops::ndo_stop (potentially, though currently the return value
is not used).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20241216120941.1690908-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update `lan78xx_get_regs` to handle errors during register and PHY
reads. Log warnings for failed reads and exit the function early if an
error occurs. Drop all previously logged registers to signal
inconsistent readings to the user space. This ensures that invalid data
is not returned to users.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241216120941.1690908-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are close to removing page->index. Use page->private instead, which
is least likely to be removed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20241216155124.3114-1-willy@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Benefit from the recent conversion of the driver to NAPI and enable GRO
support through the use of napi_gro_receive(). Pass the NAPI pointer
from the bus driver (mlxsw_pci) to the switch driver (mlxsw_spectrum)
through the skb control block where various packet metadata is already
encoded.
The main motivation is to improve forwarding performance through the use
of GRO fraglist [1]. In my testing, when the forwarding data path is
simple (routing between two ports) there is not much difference in
forwarding performance between GRO disabled and GRO enabled with
fraglist.
The improvement becomes more noticeable as the data path becomes more
complex since it is traversed less times with GRO enabled. For example,
with 10 ingress and 10 egress flower filters with different priorities
on the two ports between which routing is performed, there is an
improvement of about 140% in forwarded bandwidth.
[1] https://lore.kernel.org/netdev/20200125102645.4782-1-steffen.klassert@secunet.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/21258fe55f608ccf1ee2783a5a4534220af28903.1734354812.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
inetpeer: reduce false sharing and atomic operations
After commit 8c2bd38b95f7 ("icmp: change the order of rate limits"),
there is a risk that a host receiving packets from an unique
source targeting closed ports is using a common inet_peer structure
from many cpus.
All these cpus have to acquire/release a refcount and update
the inet_peer timestamp (p->dtime)
Switch to pure RCU to avoid changing the refcount, and update
p->dtime only once per jiffy.
Tested:
DUT : 128 cores, 32 hw rx queues.
receiving 8,400,000 UDP packets per second, targeting closed ports.
Before the series:
- napi poll can not keep up, NIC drops 1,200,000 packets
per second.
- We use 20 % of cpu cycles
After this series:
- All packets are received (no more hw drops)
- We use 12 % of cpu cycles.
v1: https://lore.kernel.org/20241213130212.1783302-1-edumazet@google.com
====================
Link: https://patch.msgid.link/20241215175629.1248773-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
Fixes: 8c2bd38b95f7 ("icmp: change the order of rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet_putpeer() will be removed in the following patch,
because we will no longer use refcounts.
Update inetpeer timestamp (p->dtime) at lookup time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of inet_getpeer() want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of inet_getpeer_v4() and inet_getpeer_v6()
want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thomas Weißschuh says:
====================
net: constify 'struct bin_attribute'
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
====================
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-0-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-4-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-2-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-1-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xiao Liang reported that the cited commit changed netns handling
in newlink() of netkit, veth, and vxcan.
Before the patch, if we don't find a netns attribute in the peer
device attributes, we tried to find another netns attribute in
the outer netlink attributes by passing it to rtnl_link_get_net().
Let's restore the original behaviour.
Fixes: 48327566769a ("rtnetlink: fix double call of rtnl_link_get_net_ifla()")
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCORBVVU8P6AHcEkENMj+gD2d3ce9t=A_o48E0yOQp8_wUQ@mail.gmail.com/#t
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Xiao Liang <shaw.leon@gmail.com>
Link: https://patch.msgid.link/20241216110432.51488-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nsim_pp_hold_write() has two problems:
1) It may return with rtnl held, as found by syzbot.
2) Its return value does not propagate an error if any.
Fixes: 1580cbcbfe77 ("net: netdevsim: add some fake page pool use")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216083703.1859921-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_is_last_ref() releases a reference while the name,
to me at least, suggests it just checks if the refcount is 1.
The semantics of the function are the same as those of
atomic_dec_and_test() and refcount_dec_and_test(), so just
use the _and_test() suffix.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241215212938.99210-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
