summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-10dm era: Recover committed writeset after crashNikos Tsironis
Following a system crash, dm-era fails to recover the committed writeset for the current era, leading to lost writes. That is, we lose the information about what blocks were written during the affected era. dm-era assumes that the writeset of the current era is archived when the device is suspended. So, when resuming the device, it just moves on to the next era, ignoring the committed writeset. This assumption holds when the device is properly shut down. But, when the system crashes, the code that suspends the target never runs, so the writeset for the current era is not archived. There are three issues that cause the committed writeset to get lost: 1. dm-era doesn't load the committed writeset when opening the metadata 2. The code that resizes the metadata wipes the information about the committed writeset (assuming it was loaded at step 1) 3. era_preresume() starts a new era, without taking into account that the current era might not have been archived, due to a system crash. To fix this: 1. Load the committed writeset when opening the metadata 2. Fix the code that resizes the metadata to make sure it doesn't wipe the loaded writeset 3. Fix era_preresume() to check for a loaded writeset and archive it, before starting a new era. Fixes: eec40579d84873 ("dm: add era target") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-02-10Merge back ACPICA material for v5.12.Rafael J. Wysocki
2021-02-10Merge back cpufreq updates for v5.12.Rafael J. Wysocki
2021-02-10ACPI: OSL: Clean up printing messagesRafael J. Wysocki
Replace the ACPI_DEBUG_PRINT() instance in osl.c unrelated to the ACPICA debug with acpi_handle_debug(), add a pr_fmt() definition to osl.c and replace direct printk() usage in that file with the suitable pr_*() calls. While at it, add a physical address value to the message in acpi_os_map_iomem() and reword a couple of messages to avoid using function names in them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-10staging: rtl8723bs: remove blank line from include/autoconf.hPhillip Potter
Remove additional blank line from include/autoconf.h, fixes one checkpatch check notice. Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20210210170024.100937-1-phil@philpotter.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10x86/{fault,efi}: Fix and rename efi_recover_from_page_fault()Andy Lutomirski
efi_recover_from_page_fault() doesn't recover -- it does a special EFI mini-oops. Rename it to make it clear that it crashes. While renaming it, I noticed a blatant bug: a page fault oops in a different thread happening concurrently with an EFI runtime service call would be misinterpreted as an EFI page fault. Fix that. This isn't quite exact. The situation could be improved by using a special CS for calls into EFI. [ bp: Massage commit message and simplify in interrupt check. ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/f43b1e80830dc78ed60ed8b0826f4f189254570c.1612924255.git.luto@kernel.org
2021-02-10ASoC: SOF: fix runtime pm usage mismatch after probe errorsKai Vehmanen
With current delayed probe implementation, sof_probe_complete is not called in case of errors. And as this function is responsible for decrementing runtime pm usage counter, this will result in following problem: - probe driver in conditions where probe will fail (to force the condition on Intel SOF systems, set "snd_sof_intel_hda_common.codec_mask=0") - unload driver (runtime-pm usage_count is leaked) - fix the issue by installing missing fw, modifying module parameters, etc actions - try to load driver again -> success, probe ok -> device never enters runtime suspend Fix the issue by storing result of delayed probe to a state variable and providing new snd_sof_device_probe_completed() to be queried from SOF PCI/ACPI/OF drivers. If probe never completed successfully, runtime PM was not set up and thus at remove(), we should not increment usage count anymore. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Link: https://lore.kernel.org/r/20210210105237.2179273-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: soc-pcm: change error message to debug messageShengjiu Wang
This log message should be a debug message, because it doesn't return directly but continue next loop. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/1612771965-5776-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: Intel: hda: add dev_dbg() when DMIC number is overriddenPierre-Louis Bossart
It's useful for debug and system integration to show cases where we ignore the number of microphones reported by NHLT. Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: Intel: HDA: don't keep a temporary variableGuennadi Liakhovetski
fixup_tplg_name() doesn't need to keep the string, allocated for filename - it's temporary. Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: Intel: detect DMIC number in SoundWire mixed configPierre-Louis Bossart
The pinmux allows for 2 SoundWire links to be enabled along with DMICs. This was the default configuration on the TGL-RVP. One issue with this configuration is that we don't have a means to automatically detect how many DMICs are used, which in turn requires the user to manually rename the topology file required on a platform. This was borderline acceptable for Intel RVPs, but now that this configuration is present in HP devices we need to automate the process. This patch makes use of the NHLT information and will pass the DMIC number to the machine driver as a parameter. A follow-up patch will expose the DMIC number to userspace/UCM with the configuration strings. The Google devices do make use of DMICs instead of SoundWire link 2 and 3, but their topology is unique enough that they do not need any NHTL support or topology renaming. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: Intel: SoundWire: refine ACPI matchPierre-Louis Bossart
We have existing platforms where the wrong machine is selected. We need to make sure the number of devices reported on a link matches what we expect for a link descriptor. This helps avoid using the TGL-RVP configuration for an HP platform or vice-versa, depending on the order in which they are inserted in the table. Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: Intel: soc-acpi: add ACPI matching table for HP Spectre x360Pierre-Louis Bossart
This device only has a single amplifier on link1, so we need a dedicated entry to find a match. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: intel: sof_sdw: add trace for dai linksBard Liao
We create dai links dynamically, so it is not easy to know what dai links are created. So adding trace for dai link name and id. Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: Intel: sof_sdw: detect DMIC number based on mach paramsRander Wang
Current driver create DMIC dai based on quirk for each platforms, so we need to add quirk for new platforms. Now driver reports DMIC number to machine driver and machine driver can create DMIC dai based on this information. The old check is reserved for some platforms may be failed to set the DMIC number in BIOS. Reviewed-by: Bard Liao <bard.liao@intel.com> Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: Intel: sof_sdw: add mic:dmic and cfg-mics component stringsPierre-Louis Bossart
UCM needs to know which microphone is used (dmic or RT715-based), let's add the information in the component string. Note the slight change from HDAudio platforms where 'cfg-dmics' was used. 'cfg-mics' is used here with the intent that this component string describes either the number of PCH-attached microphones or the number of RT715-attached ones (the assumption is that the two configurations are mutually exclusive). Suggested-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertiblePierre-Louis Bossart
This set of devices has SoundWire support along with DMICs. The DMI information was provided by users for 3 separate skus. BugLink: https://github.com/thesofproject/linux/issues/2700 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: Intel: sof-sdw: indent and add quirks consistentlyPierre-Louis Bossart
Use the same style for all quirks to avoid misses and errors Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: Intel: sof_sdw: reorganize quirks by generationPierre-Louis Bossart
The quirk table is a mess, let's reorganize it by generation before making sure that the quirks are consistent for each generation. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210208233336.59449-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: ext_manifest: use explicit number for elem_typeFred Oh
Use explicit number to define elem_type enum instead of using SOF_IPC_EXT_*. Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Karol Trzciński <karolx.trzcinski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210208232149.58899-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: HDA: (cosmetic) simplify hda_dsp_d0i3_work()Guennadi Liakhovetski
Simplify hda_dsp_d0i3_work() by returning immediately from it if D0i3 cannot be set. Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Keyon Jie <yang.jie@intel.com> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210208232149.58899-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: remove unused functionsGuennadi Liakhovetski
hda_dsp_dump_skl() is never used and hda_dsp_get_status_skl() is only called from that function. Remove both functions. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Keyon Jie <yang.jie@intel.com> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210208232149.58899-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: fix string format for errorsCurtis Malainey
These are negative error return values, printing them as hex is annoying and not beneficial. Switch back to signed type to make error lookup simpler. Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210208232149.58899-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: add missing pm debugCurtis Malainey
Type is not part of debugging parse code. Add it so unknown types don't show up while debugging Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210208232149.58899-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: Intel: boards: max98373: get dapm from cpu_daiBard Liao
There is a prefix on max98373 codec, and the prefix will be added to the pin name However, there is no prefix on the "Right Spk" and "Left Spk" widgets. To avoid getting a redundant prefix, we should get dapm from cpu_dai component. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210208234043.59750-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: dapm: use component prefix when checking widget namesShuming Fan
On a TigerLake SoundWire platform, we see these warnings: [ 27.360086] rt5682 sdw:0:25d:5682:0: ASoC: DAPM unknown pin MICBIAS [ 27.360092] rt5682 sdw:0:25d:5682:0: ASoC: DAPM unknown pin Vref2 This is root-caused to the addition of a component prefix in the machine driver. The tests in soc-dapm should account for a prefix instead of reporting an invalid issue. Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210208234043.59750-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10spi: pxa2xx: Add IDs for the controllers found on Intel LynxpointAndy Shevchenko
Add IDs for the controllers found on Intel Lynxpoint. In particular it's Macbook Air 6,2 devices. Cc: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210208163816.22147-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10spi: pxa2xx: Fix the controller numbering for Wildcat PointAndy Shevchenko
Wildcat Point has two SPI controllers and added one is actually second one. Fix the numbering by adding the description of the first one. Fixes: caba248db286 ("spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCH") Cc: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210208163816.22147-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10ASoC: SOF: sof-pci-dev: add missing Up-Extreme quirkPierre-Louis Bossart
The UpExtreme board supports the community key and was missed in previous contributions. Add it to make sure the open firmware is picked by default without needing a symlink on the target. Fixes: 46207ca24545 ('ASoC: SOF: pci: change the default firmware path when the community key is used') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210208231853.58761-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-11arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driverNobuhiro Iwamatsu
Add the GPIO node in Toshiba Visconti5 SoC-specific DT file. And enable the GPIO node in TMPV7708 RM main board's board-specific DT file. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10nbd: Convert to DEFINE_SHOW_ATTRIBUTELiao Pingfang
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Liao Pingfang <winndows@163.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10nvme: add 48-bit DMA address quirk for Amazon NVMe controllersFilippo Sironi
Some Amazon NVMe controllers do not follow the NVMe specification and are limited to 48-bit DMA addresses. Add a quirk to force bounce buffering if needed and limit the IOVA allocation for these devices. This affects all current Amazon NVMe controllers that expose EBS volumes (0x0061, 0x0065, 0x8061) and local instance storage (0xcd00, 0xcd01, 0xcd02). Signed-off-by: Filippo Sironi <sironi@amazon.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvme-hwmon: rework to avoid devm allocationHannes Reinecke
The original design to use device-managed resource allocation doesn't really work as the NVMe controller has a vastly different lifetime than the hwmon sysfs attributes, causing warning about duplicate sysfs entries upon reconnection. This patch reworks the hwmon allocation to avoid device-managed resource allocation, and uses the NVMe controller as parent for the sysfs attributes. Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Hannes Reinecke <hare@suse.de> Tested-by: Enzo Matsumiya <ematsumiya@suse.de> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: remove else at the end of the functionChaitanya Kulkarni
The function nvmet_parse_io_cmd() returns value from nvmet_file_parse_io_cmd() or nvmet_bdev_parse_io_cmd() based on which backend is set for the request. Remove the else and just return the value from nvmet_bdev_parse_io_cmd(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: add nvmet_req_subsys() helperChaitanya Kulkarni
Just like what we have to get the passthru ctrl from the req, add an helper to get the subsystem associated with the nvmet_req() instead of open coding the chain of structures. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: use min of device_path and disk lenChaitanya Kulkarni
In function __assign_req_name() instead of using the DEVICE_NAME_LEN in strncpy() use min of DISK_NAME_LEN and strlen(req->ns->device_path). This is needed to turn off the following warnings:- In file included from drivers/nvme/target/core.c:14: In function ‘__assign_req_name’, inlined from ‘trace_event_raw_event_nvmet_req_init’ at drivers/nvme/target/./trace.h:58:1: drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation] strncpy(name, req->ns->device_path, DISK_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘__assign_req_name’, inlined from ‘perf_trace_nvmet_req_complete’ at drivers/nvme/target/./trace.h:100:1: drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation] strncpy(name, req->ns->device_path, DISK_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘__assign_req_name’, inlined from ‘perf_trace_nvmet_req_init’ at drivers/nvme/target/./trace.h:58:1: drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation] strncpy(name, req->ns->device_path, DISK_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘__assign_req_name’, inlined from ‘trace_event_raw_event_nvmet_req_complete’ at drivers/nvme/target/./trace.h:100:1: drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation] strncpy(name, req->ns->device_path, DISK_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: use invalid cmd opcode helperChaitanya Kulkarni
In the NVMeOF block device backend, file backend, and passthru backend we reject and report the commands if opcode is not handled. Use the previously introduced helper in the passthru backend to make the error message uniform. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: use invalid cmd opcode helperChaitanya Kulkarni
In the NVMeOF block device backend, file backend, and passthru backend we reject and report the commands if opcode is not handled. Use the previously introduced helper in file backend to reduce the duplicate code and make the error message uniform. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: add helper to report invalid opcodeChaitanya Kulkarni
In the NVMeOF block device backend, file backend, and passthru backend we reject and report the commands if opcode is not handled. Add an helper and use it in block device backend to keep the code and error message uniform. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: remove extra variable in id-ns handlerChaitanya Kulkarni
In nvmet_execute_identify_ns() local variable ctrl is accessed only in one place, remove that and directly use it from nvmet_req->sq->ctrl. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: make nvmet_find_namespace() req basedChaitanya Kulkarni
The six callers of nvmet_find_namespace() duplicate the error log page update and status setting code for each call on failure. All callers are nvmet requests based functions, so we can pass req to the nvmet_find_namesapce() & derive ctrl from req, that'll allow us to update the error log page in nvmet_find_namespace(). Now that we pass the request we can also get rid of the local variable in nvmet_find_namespace() and use the req->ns and return the error code. Replace the ctrl parameter with nvmet_req for nvmet_find_namespace(), centralize the error log page update for non allocated namesapces, and return uniform error for non-allocated namespace. The nvmet_find_namespace() takes nsid parameter which is from NVMe commands structures such as get_log_page, identify, rw and common. All these commands have same offset for the nsid field. Derive nsid from req->cmd->common.nsid) & remove the extra parameter from the nvmet_find_namespace(). Lastly now we associate the ns to the req parameter that we pass to the nvmet_find_namespace(), rename nvmet_find_namespace() to nvmet_req_find_ns(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: return uniform error for invalid nsChaitanya Kulkarni
For nvmet_find_namespace() error case we have inconsistent error code mapping in the function nvmet_get_smart_log_nsid() and nvmet_set_feat_write_protect(). There is no point in retrying for the invalid namesapce from the host side. Set the error code to the NVME_SC_INVALID_NS | NVME_SC_DNR which matches what we have in nvmet_execute_identify_desclist(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: set status to 0 in case for invalid nsidChaitanya Kulkarni
For unallocated namespace in nvmet_execute_identify_ns() don't set the status to NVME_SC_INVALID_NS, set it to zero. Fixes: bffcd507780e ("nvmet: set right status on error in id-ns handler") Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queuesChristoph Hellwig
Make sparse happy after the recent conversion to RCU lookups. Fixes: 4e2f02bf77da ("nvmet-fc: use RCU proctection for assoc_list") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: James Smart <james.smart@broadcom.com>
2021-02-10nvme-multipath: set nr_zones for zoned namespacesKeith Busch
The bio based drivers only require the request_queue's nr_zones is set, so set this field in the head if the namespace path is zoned. Fixes: 240e6ee272c07 ("nvme: support for zoned namespaces") Reported-by: Minwoo Im <minwoo.im.dev@gmail.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet-tcp: fix potential race of tcp socket closing accept_workSagi Grimberg
When we accept a TCP connection and allocate an nvmet-tcp queue we should make sure not to fully establish it or reference it as the connection may be already closing, which triggers queue release work, which does not fence against queue establishment. In order to address such a race, we make sure to check the sk_state and contain the queue reference to be done underneath the sk_callback_lock such that the queue release work correctly fences against it. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Reported-by: Elad Grupi <elad.grupi@dell.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet-tcp: fix receive data digest calculation for multiple h2cdata PDUsSagi Grimberg
When a host sends multiple h2cdata PDUs for a single command, we should verify the data digest calculation per PDU and not per command. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Reported-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com> Tested-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvme-rdma: handle nvme_rdma_post_send failures betterChao Leng
nvme_rdma_post_send failing is a path related error and should bounce to another path when using nvme-multipath. Call nvme_host_path_error when nvme_rdma_post_send returns -EIO to ensure nvme_complete_rq gets invoked to fail over to another path if there is one. Signed-off-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvme-fabrics: avoid double completions in nvmf_fail_nonready_commandChao Leng
When reconnecting, the request may be completed with NVME_SC_HOST_PATH_ERROR in nvmf_fail_nonready_command, which currently set the state of the request to MQ_RQ_IN_FLIGHT before calling nvme_complete_rq. When this happens for a request that is freed by the caller, such as nvme_submit_user_cmd, in the worst case the request could be completed again in tear down process. Instead of calling blk_mq_start_request from nvmf_fail_nonready_command, just use the new nvme_host_path_error helper to complete the command without starting it. Signed-off-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvme: introduce a nvme_host_path_error helperChao Leng
When using nvme native multipathing, if a path related error occurs during ->queue_rq, the request needs to be completed with NVME_SC_HOST_PATH_ERROR so that the request can be failed over. Introduce a helper to complete the command from ->queue_rq in a wait that invokes nvme_complete_rq. Signed-off-by: Chao Leng <lengchao@huawei.com> [hch: renamed, added a return value to clean up the callers a bit] Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit (git 2.34.1) at 2025-09-19 06:03:48 +0000