| Age | Commit message (Collapse) | Author |
|---|
|
When running VHE, we set MDSCR_EL2.TPMS very early on to force
the trapping of EL1 SPE accesses to EL2.
However:
- we are running with HCR_EL2.{E2H,TGE}={1,1}, meaning that there
is no EL1 to trap from
- before entering a guest, we call kvm_arm_setup_debug(), which
sets MDCR_EL2_TPMS in the per-vcpu shadow mdscr_el2, which gets
applied on entry by __activate_traps_common().
The early setting of MDSCR_EL2.TPMS is therefore useless and can
be dropped.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210208095732.3267263-7-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As we are aiming to be able to control whether we enable VHE or
not, let's always drop down to EL1 first, and only then upgrade
to VHE if at all possible.
This means that if the kernel is booted at EL2, we always start
with a nVHE init, drop to EL1 to initialise the the kernel, and
only then upgrade the kernel EL to EL2 if possible (the process
is obviously shortened for secondary CPUs).
The resume path is handled similarly to a secondary CPU boot.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-6-maz@kernel.org
[will: Avoid calling switch_to_vhe twice on kaslr path]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix dm_table_supports_dax() and invert logic of both
iterate_devices_callout_fn so that all devices' DAX capabilities are
properly checked.
Fixes: 545ed20e6df6 ("dm: add infrastructure for DAX support")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
According to the definition of dm_iterate_devices_fn:
* This function must iterate through each section of device used by the
* target until it encounters a non-zero return code, which it then returns.
* Returns zero if no callout returned non-zero.
For some target type (e.g. dm-stripe), one call of iterate_devices() may
iterate multiple underlying devices internally, in which case a non-zero
return code returned by iterate_devices_callout_fn will stop the iteration
in advance. No iterate_devices_callout_fn should return non-zero unless
device iteration should stop.
Rename dm_table_requires_stable_pages() to dm_table_any_dev_attr() and
elevate it for reuse to stop iterating (and return non-zero) on the
first device that causes iterate_devices_callout_fn to return non-zero.
Use dm_table_any_dev_attr() to properly iterate through devices.
Rename device_is_nonrot() to device_is_rotational() and invert logic
accordingly to fix improper disposition.
Fixes: c3c4555edd10 ("dm table: clear add_random unless all devices have it set")
Fixes: 4693c9668fdc ("dm table: propagate non rotational flag")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Documentation/virt/kvm/api.rst:4927: WARNING: Title underline too short.
4.130 KVM_XEN_VCPU_GET_ATTR
--------------------------
Fixes: e1f68169a4f8 ("KVM: Add documentation for Xen hypercall and shared_info updates")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In order to support Xen SHUTDOWN_soft_reset (for guest kexec, etc.) the
VMM needs to be able to tear everything down and return the Xen features
to a clean slate.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210208232326.1830370-1-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When retpolines are enabled they have high overhead in the inner loop
inside kvm_handle_hva_range() that iterates over the provided memory area.
Let's mark this function and its TDP MMU equivalent __always_inline so
compiler will be able to change the call to the actual handler function
inside each of them into a direct one.
This significantly improves performance on the unmap test on the existing
kernel memslot code (tested on a Xeon 8167M machine):
30 slots in use:
Test Before After Improvement
Unmap 0.0353s 0.0334s 5%
Unmap 2M 0.00104s 0.000407s 61%
509 slots in use:
Test Before After Improvement
Unmap 0.0742s 0.0740s None
Unmap 2M 0.00221s 0.00159s 28%
Looks like having an indirect call in these functions (and, so, a
retpoline) might have interfered with unrolling of the whole loop in the
CPU.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <732d3fe9eb68aa08402a638ab0309199fa89ae56.1612810129.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
hv_vcpu_to_vcpu() helper is only used by other helpers and
is not very complex, we can drop it without much regret.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-16-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Hyper-V context is only needed for guests which use Hyper-V emulation in
KVM (e.g. Windows/Hyper-V guests) so we don't actually need to allocate
it in kvm_arch_vcpu_create(), we can postpone the action until Hyper-V
specific MSRs are accessed or SynIC is enabled.
Once allocated, let's keep the context alive for the lifetime of the vCPU
as an attempt to free it would require additional synchronization with
other vCPUs and normally it is not supposed to happen.
Note, Hyper-V style hypercall enablement is done by writing to
HV_X64_MSR_GUEST_OS_ID so we don't need to worry about allocating Hyper-V
context from kvm_hv_hypercall().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-15-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Hyper-V emulation is enabled in KVM unconditionally. This is bad at least
from security standpoint as it is an extra attack surface. Ideally, there
should be a per-VM capability explicitly enabled by VMM but currently it
is not the case and we can't mandate one without breaking backwards
compatibility. We can, however, check guest visible CPUIDs and only enable
Hyper-V emulation when "Hv#1" interface was exposed in
HYPERV_CPUID_INTERFACE.
Note, VMMs are free to act in any sequence they like, e.g. they can try
to set MSRs first and CPUIDs later so we still need to allow the host
to read/write Hyper-V specific MSRs unconditionally.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-14-vkuznets@redhat.com>
[Add selftest vcpu_set_hv_cpuid API to avoid breaking xen_vmcall_test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Hyper-V context is only needed for guests which use Hyper-V emulation in
KVM (e.g. Windows/Hyper-V guests). 'struct kvm_vcpu_hv' is, however, quite
big, it accounts for more than 1/4 of the total 'struct kvm_vcpu_arch'
which is also quite big already. This all looks like a waste.
Allocate 'struct kvm_vcpu_hv' dynamically. This patch does not bring any
(intentional) functional change as we still allocate the context
unconditionally but it paves the way to doing that only when needed.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-13-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, Hyper-V context is part of 'struct kvm_vcpu_arch' and is always
available. As a preparation to allocating it dynamically, check that it is
not NULL at call sites which can normally proceed without it i.e. the
behavior is identical to the situation when Hyper-V emulation is not being
used by the guest.
When Hyper-V context for a particular vCPU is not allocated, we may still
need to get 'vp_index' from there. E.g. in a hypothetical situation when
Hyper-V emulation was enabled on one CPU and wasn't on another, Hyper-V
style send-IPI hypercall may still be used. Luckily, vp_index is always
initialized to kvm_vcpu_get_idx() and can only be changed when Hyper-V
context is present. Introduce kvm_hv_get_vpindex() helper for
simplification.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-12-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_vcpu_hv'
As a preparation to allocating Hyper-V context dynamically, make it clear
who's the user of the said context.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-11-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
'current_vcpu' variable in KVM is a per-cpu pointer to the currently
scheduled vcpu. kvm_hv_flush_tlb()/kvm_hv_send_ipi() functions used
to have local 'vcpu' variable to iterate over vCPUs but it's gone
now and there's no need to use anything but the standard 'vcpu' as
an argument.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Spelling '&kvm->arch.hyperv' correctly is hard. Also, this makes the code
more consistent with vmx/svm where to_kvm_vmx()/to_kvm_svm() are already
being used.
Opportunistically change kvm_hv_msr_{get,set}_crash_{data,ctl}() and
kvm_hv_msr_set_crash_data() to take 'kvm' instead of 'vcpu' as these
MSRs are partition wide.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_to_hv_syndbg()'s argument is always 'vcpu' so there's no need to have
an additional prefix. Also, this makes the code more consistent with
vmx/svm where to_vmx()/to_svm() are being used.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_to_stimers()'s argument is almost always 'vcpu' so there's no need to
have an additional prefix. Also, this makes the naming more consistent with
to_hv_vcpu()/to_hv_synic().
Rename stimer_to_vcpu() to hv_stimer_to_vcpu() for consitency.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_to_synic()'s argument is almost always 'vcpu' so there's no need to
have an additional prefix. Also, as this is used outside of hyper-v
emulation code, add '_hv_' part to make it clear what this s. This makes
the naming more consistent with to_hv_vcpu().
Rename synic_to_vcpu() to hv_synic_to_vcpu() for consistency.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_to_hv_vcpu()'s argument is almost always 'vcpu' so there's
no need to have an additional prefix. Also, this makes the code
more consistent with vmx/svm where to_vmx()/to_svm() are being
used.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_hv_vapic_assist_page_enabled() seems to be unused since its
introduction in commit 10388a07164c1 ("KVM: Add HYPER-V apic access MSRs"),
drop it.
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Generally, when Hyper-V emulation is enabled, VMM is supposed to set
Hyper-V CPUID identifications so the guest knows that Hyper-V features
are available. evmcs_test doesn't currently do that but so far Hyper-V
emulation in KVM was enabled unconditionally. As we are about to change
that, proper Hyper-V CPUID identification should be set in selftests as
well.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_get_supported_hv_cpuid() may come handy in all Hyper-V related tests.
Split it off hyperv_cpuid test, create system-wide and vcpu versions.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Current KVM_USER_MEM_SLOTS limits are arch specific (512 on Power, 509 on x86,
32 on s390, 16 on MIPS) but they don't really need to be. Memory slots are
allocated dynamically in KVM when added so the only real limitation is
'id_to_index' array which is 'short'. We don't have any other
KVM_MEM_SLOTS_NUM/KVM_USER_MEM_SLOTS-sized statically defined structures.
Low KVM_USER_MEM_SLOTS can be a limiting factor for some configurations.
In particular, when QEMU tries to start a Windows guest with Hyper-V SynIC
enabled and e.g. 256 vCPUs the limit is hit as SynIC requires two pages per
vCPU and the guest is free to pick any GFN for each of them, this fragments
memslots as QEMU wants to have a separate memslot for each of these pages
(which are supposed to act as 'overlay' pages).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210127175731.2020089-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With the updated maximum number of user memslots (32)
set_memory_region_test sometimes takes longer than the default 45 seconds
to finish. Raise the value to an arbitrary 120 seconds.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210127175731.2020089-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Push the injection of #GP up to the callers, so that they can just use
kvm_complete_insn_gp. __kvm_set_dr is pretty much what the callers can use
together with kvm_complete_insn_gp, so rename it to kvm_set_dr and drop
the old kvm_set_dr wrapper.
This also allows nested VMX code, which really wanted to use __kvm_set_dr,
to use the right function.
While at it, remove the kvm_require_dr() check from the SVM interception.
The APM states:
All normal exception checks take precedence over the SVM intercepts.
which includes the CR4.DE=1 #UD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_get_dr and emulator_get_dr except an in-range value for the register
number so they cannot fail. Change the return type to void.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop a defunct forward declaration of svm_complete_interrupts().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205005750.3841462-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a helper function to handle kicking non-running vCPUs when sending
virtual IPIs. A future patch will change SVM's interception functions
to take @vcpu instead of @svm, at which piont declaring and modifying
'vcpu' in a case statement is confusing, and potentially dangerous.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205005750.3841462-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Restore the full 64-bit values of DR6 and DR7 when emulating RSM on
x86-64, as defined by both Intel's SDM and AMD's APM.
Note, bits 63:32 of DR6 and DR7 are reserved, so this is a glorified nop
unless the SMM handler is poking into SMRAM, which it most definitely
shouldn't be doing since both Intel and AMD list the DR6 and DR7 fields
as read-only.
Fixes: 660a5d517aaa ("KVM: x86: save/load state on SMM switch")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205012458.3872687-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop the DR6/7 volatile+fixed bits adjustments in RSM emulation, which
are redundant and misleading. The necessary adjustments are made by
kvm_set_dr(), which properly sets the fixed bits that are conditional
on the vCPU model.
Note, KVM incorrectly reads only bits 31:0 of the DR6/7 fields when
emulating RSM on x86-64. On the plus side for this change, that bug
makes removing "& DRx_VOLATILE" a nop.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205012458.3872687-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use hva_t, a.k.a. unsigned long, for the local variable that holds the
hypercall page address. On 32-bit KVM, gcc complains about using a u64
due to the implicit cast from a 64-bit value to a 32-bit pointer.
arch/x86/kvm/xen.c: In function ‘kvm_xen_write_hypercall_page’:
arch/x86/kvm/xen.c:300:22: error: cast to pointer from integer of
different size [-Werror=int-to-pointer-cast]
300 | page = memdup_user((u8 __user *)blob_addr, PAGE_SIZE);
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Fixes: 23200b7a30de ("KVM: x86/xen: intercept xen hypercalls if enabled")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210208201502.1239867-1-seanjc@google.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This accidentally ended up locking and then immediately unlocking kvm->lock
at the beginning of the function. Fix it.
Fixes: a76b9641ad1c ("KVM: x86/xen: add KVM_XEN_HVM_SET_ATTR/KVM_XEN_HVM_GET_ATTR")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210208232326.1830370-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On AXG platforms HHI_MIPI_CNTL0 is part of the MIPI/PCIe analog PHY
region and is not related to clock one and can be removed from it.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
CLKID_MIPI_ENABLE is not handled by the AXG clock driver anymore but by
the MIPI/PCIe PHY driver.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Replace kmap_atomic_pfn() with kmap_local_pfn() which is preemptible and
can take page faults.
Remove the indirection of the dump page and the related cruft which is not
longer required.
Remove unused or redundant header files.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This reverts commit 3751cbda8f223549d7ea28803cbec8ac87e43ed2.
Originally the patch was created to fix the reserved-memory DT-node
parsing failure on the early stages of the platform memory initialization.
That happened due to the two early memory allocators utilization that
time: bootmem and memblock. At first the platform-specific memory mapping
array was initialized. Then the early_init_fdt_scan_reserved_mem() was
called, which couldn't fully parse the "reserved-memory" DT-node since
neither memblock nor bootmem allocators hadn't been initialized at that
stage, so the fdt_init_reserved_mem() method failed on the memory
allocation calls. Only after that the platform-specific memory mapping
were used to create proper bootmem and memblock structures and let the
early memory allocations work. That's why we had to call the
fdt_init_reserved_mem() method one more time to retry the initialization
of the features like CMA.
The necessity to have that fix was disappeared after the full memblock
support had been added to the MIPS kernel and all plat_mem_setup() had
been fixed to add the memory regions right into the memblock memory pool.
Let's revert that patch then especially after having Paul reported that
the second fdt_init_reserved_mem() call causes the reserved memory pool
being created twice bigger than implied.
Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map")
Reported-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Remove unnecessary blank line, and move close of multiple-line comments
to their own trailing lines. This fixes four checkpatch warnings and one
checkpatch check notice for the include/rtl8723b_hal.h file.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210209120641.3964-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The to_usb_serial_port() macro is implemented using container_of() so
there's no need to check for NULL.
Note that neither bus match() or probe() is ever called with a NULL
struct device pointer so the checks weren't just misplaced.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
All usb_serial drivers return 0 in their remove callbacks and driver
core ignores the value returned by usb_serial_device_remove(). So change
the remove callback to return void and return 0 unconditionally in
usb_serial_device_remove().
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208143149.963644-2-uwe@kleine-koenig.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
In a bus remove function the passed device is always valid, so there is
no need to check for it being NULL.
(Side note: The check for port being non-NULL is broken anyhow, because
to_usb_serial_port() is a wrapper around container_of() for a member that is
not the first one. So port can hardly become NULL.)
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208143149.963644-1-uwe@kleine-koenig.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Use kvm_pfn_t, a.k.a. u64, for the local 'pfn' variable when retrieving
a so called "remapped" hva/pfn pair. In theory, the hva could resolve to
a pfn in high memory on a 32-bit kernel.
This bug was inadvertantly exposed by commit bd2fae8da794 ("KVM: do not
assume PTE is writable after follow_pfn"), which added an error PFN value
to the mix, causing gcc to comlain about overflowing the unsigned long.
arch/x86/kvm/../../../virt/kvm/kvm_main.c: In function ‘hva_to_pfn_remapped’:
include/linux/kvm_host.h:89:30: error: conversion from ‘long long unsigned int’
to ‘long unsigned int’ changes value from
‘9218868437227405314’ to ‘2’ [-Werror=overflow]
89 | #define KVM_PFN_ERR_RO_FAULT (KVM_PFN_ERR_MASK + 2)
| ^
virt/kvm/kvm_main.c:1935:9: note: in expansion of macro ‘KVM_PFN_ERR_RO_FAULT’
Cc: stable@vger.kernel.org
Fixes: add6a0cd1c5b ("KVM: MMU: try to fix up page faults before giving up")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210208201940.1258328-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, the follow_pfn function is exported for modules but
follow_pte is not. However, follow_pfn is very easy to misuse,
because it does not provide protections (so most of its callers
assume the page is writable!) and because it returns after having
already unlocked the page table lock.
Provide instead a simplified version of follow_pte that does
not have the pmdpp and range arguments. The older version
survives as follow_invalidate_pte() for use by fs/dax.c.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.12 merge window
This includes following Thunderbolt/USB4 changes for v5.12 merge
window:
* Start lane initialization after sleep for Thunderbolt 3 compatible
devices
* Add support for de-authorizing PCIe tunnels (software based
connection manager only)
* Add support for new ACPI 6.4 USB4 _OSC
* Allow disabling XDomain protocol
* Add support for new SL5 security level
* Clean up kernel-docs to pass W=1 builds
* A couple of cleanups and minor fixes
All these have been in linux-next without reported issues.
* tag 'thunderbolt-for-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (27 commits)
thunderbolt: Add support for native USB4 _OSC
ACPI: Add support for native USB4 control _OSC
ACPI: Execute platform _OSC also with query bit clear
thunderbolt: Allow disabling XDomain protocol
thunderbolt: Add support for PCIe tunneling disabled (SL5)
thunderbolt: dma_test: Drop unnecessary include
thunderbolt: Add clarifying comments about USB4 terms router and adapter
thunderbolt: switch: Fix kernel-doc descriptions of non-static functions
thunderbolt: nhi: Fix kernel-doc descriptions of non-static functions
thunderbolt: path: Fix kernel-doc descriptions of non-static functions
thunderbolt: eeprom: Fix kernel-doc descriptions of non-static functions
thunderbolt: ctl: Fix kernel-doc descriptions of non-static functions
thunderbolt: switch: Fix function name in the header
thunderbolt: tunnel: Fix misspelling of 'receive_path'
thunderbolt: icm: Fix a couple of formatting issues
thunderbolt: switch: Demote a bunch of non-conformant kernel-doc headers
thunderbolt: tb: Kernel-doc function headers should document their parameters
thunderbolt: nhi: Demote some non-conformant kernel-doc headers
thunderbolt: xdomain: Fix 'tb_unregister_service_driver()'s 'drv' param
thunderbolt: eeprom: Demote non-conformant kernel-doc headers to standard comment blocks
...
|
|
Add the Everest machine powered by an AST2600 chip. Copy the basic
configuration from Rainier.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Andrew Geissler <geissonator@gmail.com>
Link: https://lore.kernel.org/r/20201211170704.27640-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
power-supply is compatible with Inspur's ipsps1 driver
Signed-off-by: George Liu <liuxiwei@inspur.com>
Link: https://lore.kernel.org/r/20201225015149.1416773-1-liuxiwei@inspur.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: George Liu <liuxiwei@inspur.com>
Link: https://lore.kernel.org/r/20201225015126.1416690-1-liuxiwei@inspur.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The x11spi is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Ryan Sie <ryans@supermicro.com.tw>
Link: https://lore.kernel.org/r/20201221134315.5544-1-RyanS@supermicro.com.tw
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The NCSI_BMC_R_SEL and EN_NCSI_SWITCH_N should be active-high
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201211040002.1030-2-wangzhiqiang.bj@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable ipmb on i2c4.
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201211040002.1030-1-wangzhiqiang.bj@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Determined by scope measurements at speed.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201208012615.2717412-7-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
