summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-08ice: log message when trusted VF goes in/out of promisc modeBrett Creeley
Currently there is no message printed on the host when a VF goes in and out of promiscuous mode. This is causing confusion because this is the expected behavior based on i40e. Fix this. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08RDMA/hns: Delete redundant judgment when preparing descriptorsXinhao Liu
There is no need to use a for loop to assign values for an array of cmd descriptors which has only two elements. Link: https://lore.kernel.org/r/1612517974-31867-13-git-send-email-liweihang@huawei.com Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Remove unnecessary wrap around for EQ's consumer indexYixian Liu
The hns driver wrap around the consumer index of AEQ and CEQ when they reach to two times of queue entries number for owner mechanism, actually, it is unnecessary to wrap around since the hardware itself will mask it before use. Link: https://lore.kernel.org/r/1612517974-31867-12-git-send-email-liweihang@huawei.com Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Avoid unnecessary memset on WQEs in post_sendLang Cheng
All fields of WQE will be rewrote, so the memset is unnecessary. And when SQ is working in OWNER mode, the pipeline may prefetch the WQEs beyond PI, the memset operation may flip the owner bit too early, then the pipeline may get a wrong WQ. Link: https://lore.kernel.org/r/1612517974-31867-11-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Remove some magic numbersXinhao Liu
Use macros instead of magic numbers to represent shift of dma_handle_wqe, dma_handle_idx and UDP destination port number of RoCEv2. Link: https://lore.kernel.org/r/1612517974-31867-10-git-send-email-liweihang@huawei.com Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Move HIP06 related definitions into hns_roce_hw_v1.hLang Cheng
hns_roce_device.h is not specific to hardware, some definitions are only used for HIP06, they should be moved into hns_roce_hw_v1.h. Link: https://lore.kernel.org/r/1612517974-31867-9-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Replace wmb&__raw_writeq with writeqLang Cheng
Currently, the driver updates doorbell looks like this: post() { wqe.field = 0x111; wmb(); update_wq_db(); } update_wq_db() { db.field = 0x222; __raw_writeq(db, db_reg); } writeq() is a better choice than __raw_writeq() because it calls dma_wmb() to barrier in ARM64, and dma_wmb() is better than wmb() for ROCEE device. This patch removes all wmb() before updating doorbell of SQ/RQ/CQ/SRQ by replacing __raw_writeq() with writeq() to improve performence. The new process looks like this: post() { wqe.field = 0x111; update_wq_db(); } update_wq_db() { db.field = 0x222; writeq(db, db_reg); } Link: https://lore.kernel.org/r/1612517974-31867-8-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Skip qp_flow_control_init() for HIP09Yixing Liu
Since HIP09 does not require this function, it should be masked. Link: https://lore.kernel.org/r/1612517974-31867-7-git-send-email-liweihang@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08Merge branch 'bridge-mrp'David S. Miller
Horatiu Vultur says: ==================== bridge: mrp: Fix br_mrp_port_switchdev_set_state Based on the discussion here[1], there was a problem with the function br_mrp_port_switchdev_set_state. The problem was that it was called both with BR_STATE* and BR_MRP_PORT_STATE* types. This patch series fixes this issue and removes SWITCHDEV_ATTR_ID_MRP_PORT_STAT because is not used anymore. [1] https://www.spinics.net/lists/netdev/msg714816.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STATHoratiu Vultur
Now that MRP started to use also SWITCHDEV_ATTR_ID_PORT_STP_STATE to notify HW, then SWITCHDEV_ATTR_ID_MRP_PORT_STAT is not used anywhere else, therefore we can remove it. Fixes: c284b545900830 ("switchdev: mrp: Extend switchdev API to offload MRP") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_stateHoratiu Vultur
The function br_mrp_port_switchdev_set_state was called both with MRP port state and STP port state, which is an issue because they don't match exactly. Therefore, update the function to be used only with STP port state and use the id SWITCHDEV_ATTR_ID_PORT_STP_STATE. The choice of using STP over MRP is that the drivers already implement SWITCHDEV_ATTR_ID_PORT_STP_STATE and already in SW we update the port STP state. Fixes: 9a9f26e8f7ea30 ("bridge: mrp: Connect MRP API with the switchdev API") Fixes: fadd409136f0f2 ("bridge: switchdev: mrp: Implement MRP API for switchdev") Fixes: 2f1a11ae11d222 ("bridge: mrp: Add MRP interface.") Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08net: watchdog: hold device global xmit lock during tx disableEdwin Peer
Prevent netif_tx_disable() running concurrently with dev_watchdog() by taking the device global xmit lock. Otherwise, the recommended: netif_carrier_off(dev); netif_tx_disable(dev); driver shutdown sequence can happen after the watchdog has already checked carrier, resulting in possible false alarms. This is because netif_tx_lock() only sets the frozen bit without maintaining the locks on the individual queues. Fixes: c3f26a269c24 ("netdev: Fix lockdep warnings in multiqueue configurations.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08RDMA/hns: Disable RQ inline by defaultLijun Ou
This feature should only be enabled by querying capability from firmware. Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware") Link: https://lore.kernel.org/r/1612517974-31867-5-git-send-email-liweihang@huawei.com Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Add mapped page count checking for MTRXi Wang
Add the mapped page count checking flow to avoid invalid page size when creating MTR. Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing") Link: https://lore.kernel.org/r/1612517974-31867-4-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Fix type of sq_signal_bitsWeihang Li
This bit should be in type of enum ib_sig_type, or there will be a sparse warning. Fixes: bfe860351e31 ("RDMA/hns: Fix cast from or to restricted __le32 for driver") Link: https://lore.kernel.org/r/1612517974-31867-3-git-send-email-liweihang@huawei.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Avoid filling sgid index when modifying QP to RTRWeihang Li
ULP usually set IB(V)_QP_AV when trying to modify QP to RTR if they want to record sgid index into QPC. For UD QPs, it is useless because it will be included in WQE. For RC QPs, it will be filled in hns_roce_set_path(). So sgid index shouldn't be filled by default. Then hns_get_gid_index() is moved to hns_roce_hw_v1.c because it is only called in it. Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC") Link: https://lore.kernel.org/r/1612517974-31867-2-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Add support of direct wqeYixing Liu
Direct wqe is a mechanism to fill wqe directly into the hardware. In the case of light load, the wqe will be filled into pcie bar space of the hardware, this will reduce one memory access operation and therefore reduce the latency. Link: https://lore.kernel.org/r/1611997513-27107-1-git-send-email-liweihang@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08Merge tag 'mlx5-updates-2021-02-04' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-updates-2021-02-04 Vlad Buslov says: ================= Implement support for VF tunneling Abstract Currently, mlx5 only supports configuration with tunnel endpoint IP address on uplink representor. Remove implicit and explicit assumptions of tunnel always being terminated on uplink and implement necessary infrastructure for configuring tunnels on VF representors and updating rules on such tunnels according to routing changes. SW TC model From TC perspective VF tunnel configuration requires two rules in both directions: TX rules 1. Rule that redirects packets from UL to VF rep that has the tunnel endpoint IP address: $ tc -s filter show dev enp8s0f0 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac 16:c9:a0:2d:69:2c src_mac 0c:42:a1:58:ab:e4 eth_type ipv4 ip_flags nofrag in_hw in_hw_count 1 action order 1: mirred (Egress Redirect to device enp8s0f0_0) stolen index 3 ref 1 bind 1 installed 377 sec used 0 sec Action statistics: Sent 114096 bytes 952 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 114096 bytes 952 pkt backlog 0b 0p requeues 0 cookie 878fa48d8c423fc08c3b6ca599b50a97 no_percpu used_hw_stats delayed 2. Rule that decapsulates the tunneled flow and redirects to destination VF representor: $ tc -s filter show dev vxlan_sys_4789 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac ca:2e:a7:3f:f5:0f src_mac 0a:40:bd:30:89:99 eth_type ipv4 enc_dst_ip 7.7.7.5 enc_src_ip 7.7.7.1 enc_key_id 98 enc_dst_port 4789 enc_tos 0 ip_flags nofrag in_hw in_hw_count 1 action order 1: tunnel_key unset pipe index 2 ref 1 bind 1 installed 434 sec used 434 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen index 4 ref 1 bind 1 installed 434 sec used 0 sec Action statistics: Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 129936 bytes 1082 pkt backlog 0b 0p requeues 0 cookie ac17cf398c4c69e4a5b2f7aabd1b88ff no_percpu used_hw_stats delayed RX rules 1. Rule that encapsulates the tunneled flow and redirects packets from source VF rep to tunnel device: $ tc -s filter show dev enp8s0f0_1 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac 0a:40:bd:30:89:99 src_mac ca:2e:a7:3f:f5:0f eth_type ipv4 ip_tos 0/0x3 ip_flags nofrag in_hw in_hw_count 1 action order 1: tunnel_key set src_ip 7.7.7.5 dst_ip 7.7.7.1 key_id 98 dst_port 4789 nocsum ttl 64 pipe index 1 ref 1 bind 1 installed 411 sec used 411 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 no_percpu used_hw_stats delayed action order 2: mirred (Egress Redirect to device vxlan_sys_4789) stolen index 1 ref 1 bind 1 installed 411 sec used 0 sec Action statistics: Sent 5615833 bytes 4028 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 5615833 bytes 4028 pkt backlog 0b 0p requeues 0 cookie bb406d45d343bf7ade9690ae80c7cba4 no_percpu used_hw_stats delayed 2. Rule that redirects from tunnel device to UL rep: $ tc -s filter show dev vxlan_sys_4789 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac ca:2e:a7:3f:f5:0f src_mac 0a:40:bd:30:89:99 eth_type ipv4 enc_dst_ip 7.7.7.5 enc_src_ip 7.7.7.1 enc_key_id 98 enc_dst_port 4789 enc_tos 0 ip_flags nofrag in_hw in_hw_count 1 action order 1: tunnel_key unset pipe index 2 ref 1 bind 1 installed 434 sec used 434 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen index 4 ref 1 bind 1 installed 434 sec used 0 sec Action statistics: Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 129936 bytes 1082 pkt backlog 0b 0p requeues 0 cookie ac17cf398c4c69e4a5b2f7aabd1b88ff no_percpu used_hw_stats delayed HW offloads model For hardware offload the goal is to mach packet on both rules without exposing it to software on tunnel endpoint VF. In order to achieve this for tx, TC implementation marks encap rules with tunnel endpoint on mlx5 VF of same eswitch with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE flag and adds header modification rule to overwrite packet source port to the value of tunnel VF. Eswitch code is modified to recirculate such packets after source port value is changed, which allows second tx rules to match. For rx path indirect table infrastructure is used to allow fully processing VF tunnel traffic in hardware. To implement such pipeline driver needs to program the hardware after matching on UL rule to overwrite source vport from UL to tunnel VF and recirculate the packet to the root table to allow matching on the rule installed on tunnel VF. For this, indirect table matches all encapsulated traffic by tunnel parameters and all other IP traffic is sent to tunnel VF by the miss rule. Such configuration will cause packet to appear on VF representor instead of VF itself if packet has been matches by indirect table rule based on tunnel parameters but missed on second rule (after recirculation). Handle such case by marking packets processed by indirect table with special 0xFFF value in reg_c1 and extending slow table with additional flow group that matches on reg_c0 (source port value set by indirect tables) and reg_c1 (special 0xFFF mark). When creating offloads fdb tables, install one rule per VF vport to match on recirculated miss packets and redirect them to appropriate VF vport. Routing events In order to support routing changes and migration of tunnel device between different endpoint VFs, implement routing infrastructure and update it with FIB events. Routing entry table is introduced to mlx5 TC. Every rx and tx VF tunnel rule is attached to a routing entry, which is shared for rules of same tunnel. On FIB event the work is scheduled to delete/recreate all rules of affected tunnel. Note: only vxlan tunnel type is supported by this series. =================
2021-02-08RDMA/siw: Fix calculation of tx_valid_cpus sizeKamal Heib
The size of tx_valid_cpus was calculated under the assumption that the numa nodes identifiers are continuous, which is not the case in all archs as this could lead to the following panic when trying to access an invalid tx_valid_cpus index, avoid the following panic by using nr_node_ids instead of num_online_nodes() to allocate the tx_valid_cpus size. Kernel attempted to read user page (8) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000008 Faulting instruction address: 0xc0080000081b4a90 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: siw(+) rfkill rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm sunrpc ib_umad rdma_cm ib_cm iw_cm i40iw ib_uverbs ib_core i40e ses enclosure scsi_transport_sas ipmi_powernv ibmpowernv at24 ofpart ipmi_devintf regmap_i2c ipmi_msghandler powernv_flash uio_pdrv_genirq uio mtd opal_prd zram ip_tables xfs libcrc32c sd_mod t10_pi ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm_ttm_helper ttm drm vmx_crypto aacraid drm_panel_orientation_quirks dm_mod CPU: 40 PID: 3279 Comm: modprobe Tainted: G W X --------- --- 5.11.0-0.rc4.129.eln108.ppc64le #2 NIP: c0080000081b4a90 LR: c0080000081b4a2c CTR: c0000000007ce1c0 REGS: c000000027fa77b0 TRAP: 0300 Tainted: G W X --------- --- (5.11.0-0.rc4.129.eln108.ppc64le) MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 44224882 XER: 00000000 CFAR: c0000000007ce200 DAR: 0000000000000008 DSISR: 40000000 IRQMASK: 0 GPR00: c0080000081b4a2c c000000027fa7a50 c0080000081c3900 0000000000000040 GPR04: c000000002023080 c000000012e1c300 000020072ad70000 0000000000000001 GPR08: c000000001726068 0000000000000008 0000000000000008 c0080000081b5758 GPR12: c0000000007ce1c0 c0000007fffc3000 00000001590b1e40 0000000000000000 GPR16: 0000000000000000 0000000000000001 000000011ad68fc8 00007fffcc09c5c8 GPR20: 0000000000000008 0000000000000000 00000001590b2850 00000001590b1d30 GPR24: 0000000000043d68 000000011ad67a80 000000011ad67a80 0000000000100000 GPR28: c000000012e1c300 c0000000020271c8 0000000000000001 c0080000081bf608 NIP [c0080000081b4a90] siw_init_cpulist+0x194/0x214 [siw] LR [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw] Call Trace: [c000000027fa7a50] [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw] (unreliable) [c000000027fa7a90] [c0080000081b4e68] siw_init_module+0x40/0x2a0 [siw] [c000000027fa7b30] [c0000000000124f4] do_one_initcall+0x84/0x2e0 [c000000027fa7c00] [c000000000267ffc] do_init_module+0x7c/0x350 [c000000027fa7c90] [c00000000026a180] __do_sys_init_module+0x210/0x250 [c000000027fa7db0] [c0000000000387e4] system_call_exception+0x134/0x230 [c000000027fa7e10] [c00000000000d660] system_call_common+0xf0/0x27c Instruction dump: 40810044 3d420000 e8bf0000 e88a82d0 3d420000 e90a82c8 792a1f24 7cc4302a 7d2642aa 79291f24 7d25482a 7d295214 <7d4048a8> 7d4a3b78 7d4049ad 40c2fff4 Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/20210201112922.141085-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08selftests: breakpoints: Use correct error messages in breakpoint_test_arm64.cTiezhu Yang
When call ptrace(PTRACE_CONT, ...) failed, use correct error messages. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08cxgb4: remove unused vpd_cap_addrHeiner Kallweit
It is likely that this is a leftover from T3 driver heritage. cxgb4 uses the PCI core VPD access code that handles detection of VPD capabilities. Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09iomap: support REQ_OP_ZONE_APPENDNaohiro Aota
A ZONE_APPEND bio must follow hardware restrictions (e.g. not exceeding max_zone_append_sectors) not to be split. bio_iov_iter_get_pages builds such restricted bio using __bio_iov_append_get_pages if bio_op(bio) == REQ_OP_ZONE_APPEND. To utilize it, we need to set the bio_op before calling bio_iov_iter_get_pages(). This commit introduces IOMAP_F_ZONE_APPEND, so that iomap user can set the flag to indicate they want REQ_OP_ZONE_APPEND and restricted bio. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09block: add bio_add_zone_append_pageJohannes Thumshirn
Add bio_add_zone_append_page(), a wrapper around bio_add_hw_page() which is intended to be used by file systems that directly add pages to a bio instead of using bio_iov_iter_get_pages(). Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09netfilter: nftables: relax check for stateful expressions in set definitionPablo Neira Ayuso
Restore the original behaviour where users are allowed to add an element with any stateful expression if the set definition specifies no stateful expressions. Make sure upper maximum number of stateful expressions of NFT_SET_EXPR_MAX is not reached. Fixes: 8cfd9b0f8515 ("netfilter: nftables: generalize set expressions support") Fixes: 48b0ae046ee9 ("netfilter: nftables: netlink support for several set element expressions") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-08net: bridge: use switchdev for port flags set through sysfs tooVladimir Oltean
Looking through patchwork I don't see that there was any consensus to use switchdev notifiers only in case of netlink provided port flags but not sysfs (as a sort of deprecation, punishment or anything like that), so we should probably keep the user interface consistent in terms of functionality. http://patchwork.ozlabs.org/project/netdev/patch/20170605092043.3523-3-jiri@resnulli.us/ http://patchwork.ozlabs.org/project/netdev/patch/20170608064428.4785-3-jiri@resnulli.us/ Fixes: 3922285d96e7 ("net: bridge: Add support for offloading port attributes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08selftests/vDSO: fix ABI selftest on riscvTobias Klauser
Only older versions of the RISC-V GCC toolchain define __riscv__. Check for __riscv as well, which is used by newer GCC toolchains. Also set VDSO_32BIT based on __riscv_xlen. Before (on riscv64): $ ./vdso_test_abi [vDSO kselftest] VDSO_VERSION: LINUX_4 Could not find __vdso_gettimeofday Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_REALTIME [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_BOOTTIME [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_TAI [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_REALTIME_COARSE [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_MONOTONIC [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_MONOTONIC_RAW [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_MONOTONIC_COARSE [PASS] Could not find __vdso_time After (on riscv32): $ ./vdso_test_abi [vDSO kselftest] VDSO_VERSION: LINUX_4.15 The time is 1612449376.015086 The time is 1612449376.18340784 The resolution is 0 1 clock_id: CLOCK_REALTIME [PASS] The time is 774.842586182 The resolution is 0 1 clock_id: CLOCK_BOOTTIME [PASS] The time is 1612449376.22536565 The resolution is 0 1 clock_id: CLOCK_TAI [PASS] The time is 1612449376.20885172 The resolution is 0 4000000 clock_id: CLOCK_REALTIME_COARSE [PASS] The time is 774.845491269 The resolution is 0 1 clock_id: CLOCK_MONOTONIC [PASS] The time is 774.849534200 The resolution is 0 1 clock_id: CLOCK_MONOTONIC_RAW [PASS] The time is 774.842139684 The resolution is 0 4000000 clock_id: CLOCK_MONOTONIC_COARSE [PASS] Could not find __vdso_time Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08RDMA/hns: Add verification of QP type when post_recvWenpeng Liang
The post_recv only supports QP types of RC, GSI and UD. Link: https://lore.kernel.org/r/1611997090-48820-13-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Refactor hns_roce_v2_post_srq_recv()Wenpeng Liang
The SRQ in the hns driver consists of the following four parts: * wqe buf: the buffer to store WQE. * wqe_idx buf: the cqe of SRQ may be not generated in the order of wqe, so the wqe_idx corresponding to the idle WQE needs to be pushed into the index queue which is a FIFO, then it instructs the hardware to obtain the corresponding WQE. * bitmap: bitmap is used to generate and release wqe_idx. When the user has a new WR, the driver finds the idx of the idle wqe in bitmap. When the CQE of wqe is generated, the driver will release the idx. * wr_id buf: wr_id buf is used to store the user's wr_id, then return it to the user when poll_cq verb is invoked. The process of post SRQ recv is refactored to make preceding code clearer. Link: https://lore.kernel.org/r/1611997090-48820-12-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Clear remaining unused sges when post_recvXi Wang
The HIP09 requires the driver to clear the unused data segments in wqe buffer to make the hns ROCEE stop reading the remaining invalid sges for RQ. Link: https://lore.kernel.org/r/1611997090-48820-11-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Refactor post recv flowXi Wang
Refactor post recv flow by removing unnecessary checking and removing duplicated code. Link: https://lore.kernel.org/r/1611997090-48820-10-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Use new interfaces to write SRQCLang Cheng
Use new register operation interfaces to simplify the process of write SRQ Context. Link: https://lore.kernel.org/r/1611997090-48820-9-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Refactor code about SRQ ContextWenpeng Liang
Reduce parameter numbers of write_srqc() and move some related code into it from alloc_srqc(). Link: https://lore.kernel.org/r/1611997090-48820-8-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Refactor hns_roce_create_srq()Wenpeng Liang
Split the SRQ creation process into multiple steps and encapsulate them into functions. Link: https://lore.kernel.org/r/1611997090-48820-7-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Remove the reserved WQE of SRQWenpeng Liang
Each SRQs contain an reserved WQE, it is inappropriate and should be removed. Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode") Link: https://lore.kernel.org/r/1611997090-48820-6-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Fixed wrong judgments in the goto branchWenpeng Liang
When an error occurs, the qp_table must be cleared, regardless of whether the SRQ feature is enabled. Fixes: 5c1f167af112 ("RDMA/hns: Init SRQ table for hip08") Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Force srq_limit to 0 when creating SRQWenpeng Liang
According to the IB Specification, srq_limit shouldn't be configured during SRQ creation. If a user set srq_limit at this time, the driver should forced it to zero, or the result of creating SRQ will conflict with the result of querying SRQ. Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode") Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Bugfix for checking whether the srq is full when post wrWenpeng Liang
If a user posts WR by wr_list, the head pointer of idx_queue won't be updated until all wqes are filled, so the judgment of whether head equals to tail will get a wrong result. Fix above issue and move the head and tail pointer from the srq structure into the idx_queue structure. After idx_queue is filled with wqe idx, the head pointer of it will increase. Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode") Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Allocate one more recv SGE for HIP08Lang Cheng
The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the driver needs to allocate at least one SGE when creating RQ/SRQ and ensure that at least one SGE is filled with the special value during post_recv. Besides, the kernel driver should only do this for kernel ULP. For userspace ULP, the userspace driver will allocate the reserved SGE in buffer, and the kernel driver just needs to pin the corresponding size of memory based on the userspace driver's requirements. Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08selftests/x86/ldt_gdt: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./tools/testing/selftests/x86/ldt_gdt.c:610:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08selftests/ipc: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./tools/testing/selftests/ipc/msgque.c:72:3-4: Unneeded semicolon ./tools/testing/selftests/ipc/msgque.c:183:2-3: Unneeded semicolon ./tools/testing/selftests/ipc/msgque.c:191:2-3: Unneeded semicolon Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08kselftests: dmabuf-heaps: Add extra checking that allocated buffers are zeroedJohn Stultz
Add a check to validate that buffers allocated from the heaps are properly zeroed before being given to userland. It is done by allocating a number of buffers, and filling them with a nonzero pattern, then closing and reallocating more buffers and checking that they are all properly zeroed. This is helpful to validate any cached buffers are zeroed before being given back out. Cc: Shuah Khan <shuah@kernel.org> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kselftest@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08kselftests: dmabuf-heaps: Cleanup test outputJohn Stultz
Cleanup the test output so it is a bit easier to read Cc: Shuah Khan <shuah@kernel.org> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kselftest@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08kselftests: dmabuf-heaps: Softly fail if don't find a vgem deviceJohn Stultz
While testing against a vgem device is helpful for testing importing they aren't always configured in, so don't make it a fatal failure. Cc: Shuah Khan <shuah@kernel.org> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kselftest@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08kselftests: dmabuf-heaps: Add clearer checks on DMABUF_BEGIN/END_SYNCJohn Stultz
Add logic to check the dmabuf sync calls succeed. Cc: Shuah Khan <shuah@kernel.org> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kselftest@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's ↵John Stultz
usr/include dir Copied in from somewhere else, the makefile was including the kerne's usr/include dir, which caused the asm/ioctl.h file to be used. Unfortunately, that file has different values for _IOC_SIZEBITS and _IOC_WRITE than include/uapi/asm-generic/ioctl.h which then causes the _IOCW macros to give the wrong ioctl numbers, specifically for DMA_BUF_IOCTL_SYNC. This patch simply removes the extra include from the Makefile Cc: Shuah Khan <shuah@kernel.org> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kselftest@vger.kernel.org Fixes: a8779927fd86c ("kselftests: Add dma-heap test") Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08selftests: tc-testing: u32: Add tests covering sample optionPhil Sutter
Kernel's key folding basically consists of shifting away least significant zero bits in mask and masking the resulting value with (divisor - 1). Test for u32's 'sample' option to behave identical. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socketXin Long
In rxrpc_open_socket(), now it's using sock_create_kern() and kernel_bind() to create a udp tunnel socket, and other kernel APIs to set up it. These code can be replaced with udp tunnel APIs udp_sock_create() and setup_udp_tunnel_sock(), and it'll simplify rxrpc_open_socket(). Note that with this patch, the udp tunnel socket will always bind to a random port if transport is not provided by users, which is suggested by David Howells, thanks! Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08kunit: tool: fix unintentional statefulness in run_kernel()Daniel Latypov
This is a bug that has been present since the first version of this code. Using [] as a default parameter is dangerous, since it's mutable. Example using the REPL: >>> def bad(param = []): ... param.append(len(param)) ... print(param) ... >>> bad() [0] >>> bad() [0, 1] This wasn't a concern in the past since it would just keep appending the same values to it. E.g. before, `args` would just grow in size like: [mem=1G', 'console=tty'] [mem=1G', 'console=tty', mem=1G', 'console=tty'] But with now filter_glob, this is more dangerous, e.g. run_kernel(filter_glob='my-test*') # default modified here run_kernel() # filter_glob still applies here! That earlier `filter_glob` will affect all subsequent calls that don't specify `args`. Note: currently the kunit tool only calls run_kernel() at most once, so it's not possible to trigger any negative side-effects right now. Fixes: 6ebf5866f2e8 ("kunit: tool: add Python wrappers for running KUnit tests") Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08kunit: tool: add support for filtering suites by globDaniel Latypov
This allows running different subsets of tests, e.g. $ ./tools/testing/kunit/kunit.py build $ ./tools/testing/kunit/kunit.py exec 'list*' $ ./tools/testing/kunit/kunit.py exec 'kunit*' This passes the "kunit_filter.glob" commandline option to the UML kernel, which currently only supports filtering by suite name. Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-02-08kunit: add kunit.filter_glob cmdline option to filter suitesDaniel Latypov
E.g. specifying this would run suites with "list" in their name. kunit.filter_glob=list* Note: the executor prints out a TAP header that includes the number of suites we intend to run. So unless we want to report empty results for filtered-out suites, we need to do the filtering here in the executor. It's also probably better in the executor since we most likely don't want any filtering to apply to tests built as modules. This code does add a CONFIG_GLOB=y dependency for CONFIG_KUNIT=y. But the code seems light enough that it shouldn't be an issue. For now, we only filter on suite names so we don't have to create copies of the suites themselves, just the array (of arrays) holding them. The name is rather generic since in the future, we could consider extending it to a syntax like: kunit.filter_glob=<suite_glob>.<test_glob> E.g. to run all the del list tests kunit.filter_glob=list-kunit-test.*del* But at the moment, it's far easier to manually comment out test cases in test files as opposed to messing with sets of Kconfig entries to select specific suites. So even just doing this makes using kunit far less annoying. Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-24 07:49:39 +0000