summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-14clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driverMartin Botka
Add a driver for the multimedia clock controller found on SDM660 based devices. This should allow most multimedia device drivers to probe and control their clocks. Signed-off-by: Martin Botka <martin.botka@somainline.org> Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> [angelogioacchino.delregno@somainline.org: Cleaned up SDM630 clock fixups] Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210113183817.447866-4-angelogioacchino.delregno@somainline.org [sboyd@kernel.org: Silence NULL pointer sparse warnings] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as criticalAngeloGioacchino Del Regno
This clock is critical for any access to the GPU: gating it will crash the system when the GPU has been initialized (so, you cannot gate it unless you deinit the Adreno completely). So, to achieve a working state with GPU on, set the CLK_IS_CRITICAL flag to this clock. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210113183817.447866-3-angelogioacchino.delregno@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as criticalAngeloGioacchino Del Regno
Similarly to MSM8998, any access to the MMSS depends on this clock. Gating it will crash the system when RPMCC inits mmssnoc_axi_rpm_clk. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210113183817.447866-2-angelogioacchino.delregno@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate settingAngeloGioacchino Del Regno
The GPU PLL0 is not a fixed PLL and the rate can be set on it: this is necessary especially on boards which bootloader is setting a very low rate on this PLL before booting Linux, which would be unsuitable for postdividing to reach the maximum allowed Adreno GPU frequency of 710MHz (or, actually, even 670MHz..) on this SoC. To allow setting rates on the GPU PLL0, also define VCO boundaries and set the CLK_SET_RATE_PARENT flag to the GPU PLL0 postdivider. With this change, the Adreno GPU is now able to scale through all the available frequencies. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210114221059.483390-12-angelogioacchino.delregno@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdscAngeloGioacchino Del Regno
The GPU GX GDSC has GPU_GX_BCR reset and gfx3d_clk CXC, as stated on downstream kernels (and as verified upstream, because otherwise random lockups happen). Also, add PWRSTS_RET and NO_RET_PERIPH: also as found downstream, and also as verified here, to avoid GPU related lockups it is necessary to force retain mem, but *not* peripheral when enabling this GDSC (and, of course, the inverse on disablement). With this change, the GPU finally works flawlessly on my four different MSM8998 devices from two different manufacturers. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210114221059.483390-11-angelogioacchino.delregno@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14clk: qcom: gdsc: Implement NO_RET_PERIPH flagAngeloGioacchino Del Regno
In some rare occasions, we want to only set the RETAIN_MEM bit, but not the RETAIN_PERIPH one: this is seen on at least SDM630/636/660's GPU-GX GDSC, where unsetting and setting back the RETAIN_PERIPH bit will generate chaos and panics during GPU suspend time (mainly, the chaos is unaligned access). For this reason, introduce a new NO_RET_PERIPH flag to the GDSC driver to address this corner case. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210113183817.447866-8-angelogioacchino.delregno@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14clk: mstar: MStar/SigmaStar MPLL driverDaniel Palmer
This adds a basic driver for the MPLL block found in MStar/SigmaStar ARMv7 SoCs. Currently this driver is only good for calculating the rates of it's outputs and the actual configuration must be done before the kernel boots. Usually this is done even before u-boot starts. This driver targets the MPLL block found in the MSC313/MSC313E but there is no documentation this chip so the register descriptions for the another MStar chip the MST786 were used as they seem to match. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210211052206.2955988-5-daniel@0x0f.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14clk: fixed: add devm helper for clk_hw_register_fixed_factor()Daniel Palmer
Add a devm helper for clk_hw_register_fixed_factor() so that drivers that internally register fixed factor clocks for things like dividers don't need to manually unregister them on remove or if probe fails. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210211052206.2955988-4-daniel@0x0f.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14dt-bindings: clk: mstar msc313 mpll binding descriptionDaniel Palmer
Add a binding description for the MStar/SigmaStar MPLL clock block. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210211052206.2955988-3-daniel@0x0f.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14dt-bindings: clk: mstar msc313 mpll binding headerDaniel Palmer
Simple header to document the relationship between the MPLL outputs and which divider they come from. Output 0 is missing because it should not be consumed. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210211052206.2955988-2-daniel@0x0f.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14Merge branch 'for-rc8-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED fix from Pavel Machek: "One-liner fixing a build problem" * 'for-rc8-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: rt8515: add V4L2_FLASH_LED_CLASS dependency
2021-02-14Merge tag 'kbuild-fixes-v5.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64 - Use pkg-config for scripts/sign-file.c CFLAGS * tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts: set proper OpenSSL include dir also for sign-file sparc: remove wrong comment from arch/sparc/include/asm/Kbuild kbuild: fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
2021-02-14Merge tag 'x86_urgent_for_v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "I kinda knew while typing 'I hope this is the last batch of x86/urgent updates' last week, Murphy was reading too and uttered 'Hold my beer!'. So here's more fixes... Thanks Murphy. Anyway, three more x86/urgent fixes for 5.11 final. We should be finally ready (famous last words). :-) - An SGX use after free fix - A fix for the fix to disable CET instrumentation generation for kernel code. We forgot 32-bit, which we seem to do very often nowadays - A Xen PV fix to irqdomain init ordering" * tag 'x86_urgent_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init() x86/build: Disable CET instrumentation in the kernel for 32-bit too x86/sgx: Maintain encl->refcount for each encl->mm_list entry
2021-02-14leds: rt8515: add V4L2_FLASH_LED_CLASS dependencyArnd Bergmann
The leds-rt8515 driver can optionall use the v4l2 flash led class, but it causes a link error when that class is in a loadable module and the rt8515 driver itself is built-in: ld.lld: error: undefined symbol: v4l2_flash_init >>> referenced by leds-rt8515.c >>> leds/flash/leds-rt8515.o:(rt8515_probe) in archive drivers/built-in.a Adding 'depends on V4L2_FLASH_LED_CLASS' in Kconfig would avoid that, but it would make it impossible to use the driver without the v4l2 support. Add the same dependency that the other users of this class have instead, which just prevents the broken configuration. Fixes: e1c6edcbea13 ("leds: rt8515: Add Richtek RT8515 LED driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-15scripts: set proper OpenSSL include dir also for sign-fileRolf Eike Beer
Fixes: 2cea4a7a1885 ("scripts: use pkg-config to locate libcrypto") Signed-off-by: Rolf Eike Beer <eb@emlix.com> Cc: stable@vger.kernel.org # 5.6.x Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-15sparc: remove wrong comment from arch/sparc/include/asm/KbuildMasahiro Yamada
These are NOT exported to userspace. The headers listed in arch/sparc/include/uapi/asm/Kbuild are exported. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-14ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10Takashi Iwai
BOSS GP-10 with 0582:0185 requires the similar quirk to make the implicit feedback working like other BOSS devices. Reported-by: Keith Milner <kamilner@superlative.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210214154251.10750-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-02-14irqchip/imx: IMX_INTMUX should not default to y, unconditionallyGeert Uytterhoeven
Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of IMX_INTMUX to ARCH_MXC, and ask the user in case of compile-testing. Fixes: 66968d7dfc3f5451 ("irqchip: Add COMPILE_TEST support for IMX_INTMUX") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210208145605.422943-1-geert+renesas@glider.be
2021-02-13Merge branch 'skbuff-introduce-skbuff_heads-bulking-and-reusing'David S. Miller
Alexander Lobakin says: ==================== skbuff: introduce skbuff_heads bulking and reusing Currently, all sorts of skb allocation always do allocate skbuff_heads one by one via kmem_cache_alloc(). On the other hand, we have percpu napi_alloc_cache to store skbuff_heads queued up for freeing and flush them by bulks. We can use this cache not only for bulk-wiping, but also to obtain heads for new skbs and avoid unconditional allocations, as well as for bulk-allocating (like XDP's cpumap code and veth driver already do). As this might affect latencies, cache pressure and lots of hardware and driver-dependent stuff, this new feature is mostly optional and can be issued via: - a new napi_build_skb() function (as a replacement for build_skb()); - existing {,__}napi_alloc_skb() and napi_get_frags() functions; - __alloc_skb() with passing SKB_ALLOC_NAPI in flags. iperf3 showed 35-70 Mbps bumps for both TCP and UDP while performing VLAN NAT on 1.2 GHz MIPS board. The boost is likely to be bigger on more powerful hosts and NICs with tens of Mpps. Note on skbuff_heads from distant slabs or pfmemalloc'ed slabs: - kmalloc()/kmem_cache_alloc() itself allows by default allocating memory from the remote nodes to defragment their slabs. This is controlled by sysctl, but according to this, skbuff_head from a remote node is an OK case; - The easiest way to check if the slab of skbuff_head is remote or pfmemalloc'ed is: if (!dev_page_is_reusable(virt_to_head_page(skb))) /* drop it */; ...*but*, regarding that most slabs are built of compound pages, virt_to_head_page() will hit unlikely-branch every single call. This check costed at least 20 Mbps in test scenarios and seems like it'd be better to _not_ do this. Since v5 [4]: - revert flags-to-bool conversion and simplify flags testing in __alloc_skb() (Alexander Duyck). Since v4 [3]: - rebase on top of net-next and address kernel build robot issue; - reorder checks a bit in __alloc_skb() to make new condition even more harmless. Since v3 [2]: - make the feature mostly optional, so driver developers could decide whether to use it or not (Paolo Abeni). This reuses the old flag for __alloc_skb() and introduces a new napi_build_skb(); - reduce bulk-allocation size from 32 to 16 elements (also Paolo). This equals to the value of XDP's devmap and veth batch processing (which were tested a lot) and should be sane enough; - don't waste cycles on explicit in_serving_softirq() check. Since v2 [1]: - also cover {,__}alloc_skb() and {,__}build_skb() cases (became handy after the changes that pass tiny skbs requests to kmalloc layer); - cover the cache with KASAN instrumentation (suggested by Eric Dumazet, help of Dmitry Vyukov); - completely drop redundant __kfree_skb_flush() (also Eric); - lots of code cleanups; - expand the commit message with NUMA and pfmemalloc points (Jakub). Since v1 [0]: - use one unified cache instead of two separate to greatly simplify the logics and reduce hotpath overhead (Edward Cree); - new: recycle also GRO_MERGED_FREE skbs instead of immediate freeing; - correct performance numbers after optimizations and performing lots of tests for different use cases. [0] https://lore.kernel.org/netdev/20210111182655.12159-1-alobakin@pm.me [1] https://lore.kernel.org/netdev/20210113133523.39205-1-alobakin@pm.me [2] https://lore.kernel.org/netdev/20210209204533.327360-1-alobakin@pm.me [3] https://lore.kernel.org/netdev/20210210162732.80467-1-alobakin@pm.me [4] https://lore.kernel.org/netdev/20210211185220.9753-1-alobakin@pm.me ==================== Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: queue NAPI_MERGED_FREE skbs into NAPI cache instead of freeingAlexander Lobakin
napi_frags_finish() and napi_skb_finish() can only be called inside NAPI Rx context, so we can feed NAPI cache with skbuff_heads that got NAPI_MERGED_FREE verdict instead of immediate freeing. Replace __kfree_skb() with __kfree_skb_defer() in napi_skb_finish() and move napi_skb_free_stolen_head() to skbuff.c, so it can drop skbs to NAPI cache. As many drivers call napi_alloc_skb()/napi_get_frags() on their receive path, this becomes especially useful. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: allow to use NAPI cache from __napi_alloc_skb()Alexander Lobakin
{,__}napi_alloc_skb() is mostly used either for optional non-linear receive methods (usually controlled via Ethtool private flags and off by default) and/or for Rx copybreaks. Use __napi_build_skb() here for obtaining skbuff_heads from NAPI cache instead of inplace allocations. This includes both kmalloc and page frag paths. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: allow to optionally use NAPI cache from __alloc_skb()Alexander Lobakin
Reuse the old and forgotten SKB_ALLOC_NAPI to add an option to get an skbuff_head from the NAPI cache instead of inplace allocation inside __alloc_skb(). This implies that the function is called from softirq or BH-off context, not for allocating a clone or from a distant node. Cc: Alexander Duyck <alexander.duyck@gmail.com> # Simplified flags check Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: introduce {,__}napi_build_skb() which reuses NAPI cache headsAlexander Lobakin
Instead of just bulk-flushing skbuff_heads queued up through napi_consume_skb() or __kfree_skb_defer(), try to reuse them on allocation path. If the cache is empty on allocation, bulk-allocate the first 16 elements, which is more efficient than per-skb allocation. If the cache is full on freeing, bulk-wipe the second half of the cache (32 elements). This also includes custom KASAN poisoning/unpoisoning to be double sure there are no use-after-free cases. To not change current behaviour, introduce a new function, napi_build_skb(), to optionally use a new approach later in drivers. Note on selected bulk size, 16: - this equals to XDP_BULK_QUEUE_SIZE, DEV_MAP_BULK_SIZE and especially VETH_XDP_BATCH, which is also used to bulk-allocate skbuff_heads and was tested on powerful setups; - this also showed the best performance in the actual test series (from the array of {8, 16, 32}). Suggested-by: Edward Cree <ecree.xilinx@gmail.com> # Divide on two halves Suggested-by: Eric Dumazet <edumazet@google.com> # KASAN poisoning Cc: Dmitry Vyukov <dvyukov@google.com> # Help with KASAN Cc: Paolo Abeni <pabeni@redhat.com> # Reduced batch size Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: move NAPI cache declarations upper in the fileAlexander Lobakin
NAPI cache structures will be used for allocating skbuff_heads, so move their declarations a bit upper. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: remove __kfree_skb_flush()Alexander Lobakin
This function isn't much needed as NAPI skb queue gets bulk-freed anyway when there's no more room, and even may reduce the efficiency of bulk operations. It will be even less needed after reusing skb cache on allocation path, so remove it and this way lighten network softirqs a bit. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: use __build_skb_around() in __alloc_skb()Alexander Lobakin
Just call __build_skb_around() instead of open-coding it. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: simplify __alloc_skb() a bitAlexander Lobakin
Use unlikely() annotations for skbuff_head and data similarly to the two other allocation functions and remove totally redundant goto. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: make __build_skb_around() return voidAlexander Lobakin
__build_skb_around() can never fail and always returns passed skb. Make it return void to simplify and optimize the code. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: simplify kmalloc_reserve()Alexander Lobakin
Eversince the introduction of __kmalloc_reserve(), "ip" argument hasn't been used. _RET_IP_ is embedded inside kmalloc_node_track_caller(). Remove the redundant macro and rename the function after it. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13skbuff: move __alloc_skb() next to the other skb allocation functionsAlexander Lobakin
In preparation before reusing several functions in all three skb allocation variants, move __alloc_skb() next to the __netdev_alloc_skb() and __napi_alloc_skb(). No functional changes. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One small fix for the Allwinner clk driver so that display clks figure out the correct rate to use. This fixes displays running 4k@60Hz and some other resolutions that haven't been exercised and fully understood until now" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: mp: fix parent rate change flag check
2021-02-13Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One fix for scsi_debug that fixes a memory leak on module removal" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_debug: Fix a memory leak
2021-02-13rtc: abx80x: Add utility function for writing configuration keyKevin P. Fleming
Writing one of key two values into the configuration key register is a common operation, so a utility function has been added to provide consistent behavior and eliminate code duplication. Signed-off-by: Kevin P. Fleming <kevin+linux@km6g.us> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> To: linux-rtc@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200615105113.57770-2-kevin+linux@km6g.us
2021-02-13ubifs: Fix error return code in alloc_wbufs()Wang ShaoBo
Fix to return PTR_ERR() error code from the error handling case instead fo 0 in function alloc_wbufs(), as done elsewhere in this function. Fixes: 6a98bc4614de ("ubifs: Add authentication nodes to journal") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-13rtc: pcf2127: properly set flag WD_CD for rtc chips(pcf2129, pca2129)Biwen Li
Properly set flag WD_CD for rtc chips(pcf2129, pca2129) Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201202031840.15582-1-biwen.li@oss.nxp.com
2021-02-13staging: hikey9xx: Fix alignment of function parametersMukul Mehar
This patch fixes the following checkpatch.pl check: CHECK: Alignment should match open parenthesis Signed-off-by: Mukul Mehar <mukulmehar02@gmail.com> Link: https://lore.kernel.org/r/20210213120556.73579-1-mukulmehar02@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13staging: greybus: Fixed a misspelling in hid.cPritthijit Nath
Fixed the spelling of 'transfered' to 'transferred'. Signed-off-by: Pritthijit Nath <pritthijit.nath@icloud.com> Link: https://lore.kernel.org/r/20210212101324.12391-1-pritthijit.nath@icloud.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13staging: wimax/i2400m: fix some byte order issues found by sparseAnirudh Rayabharam
Fix sparse byte-order warnings in the i2400m_bm_cmd_prepare() function: wimax/i2400m/fw.c:194:36: warning: restricted __le32 degrades to integer wimax/i2400m/fw.c:195:34: warning: invalid assignment: += wimax/i2400m/fw.c:195:34: left side has type unsigned int wimax/i2400m/fw.c:195:34: right side has type restricted __le32 wimax/i2400m/fw.c:196:32: warning: restricted __le32 degrades to integer wimax/i2400m/fw.c:196:47: warning: restricted __le32 degrades to integer wimax/i2400m/fw.c:196:66: warning: restricted __le32 degrades to integer Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20210212153843.8554-1-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13staging: wimax: i2400m: fix some incorrect type warningsAyush
Fix some "incorrect type in assignment" warnings reported by sparse in tx.c sparse warnings: wimax/i2400m/tx.c:788:35: warning: cast to restricted __le16 wimax/i2400m/tx.c:788:33: warning: incorrect type in assignment (different base types) wimax/i2400m/tx.c:788:33: expected restricted __le16 [usertype] num_pls wimax/i2400m/tx.c:788:33: got unsigned short [usertype] wimax/i2400m/tx.c:896:32: warning: cast to restricted __le32 wimax/i2400m/tx.c:896:30: warning: incorrect type in assignment (different base types) wimax/i2400m/tx.c:896:30: expected restricted __le32 [usertype] barker wimax/i2400m/tx.c:896:30: got unsigned int [usertype] wimax/i2400m/tx.c:897:34: warning: cast to restricted __le32 wimax/i2400m/tx.c:897:32: warning: incorrect type in assignment (different base types) wimax/i2400m/tx.c:897:32: expected restricted __le32 [usertype] sequence wimax/i2400m/tx.c:897:32: got unsigned int [usertype] wimax/i2400m/tx.c:899:15: warning: cast to restricted __le32 wimax/i2400m/tx.c:899:15: warning: cast from restricted __le16 Signed-off-by: Ayush <ayush@disroot.org> Link: https://lore.kernel.org/r/20210212213628.801642-1-ayush@disroot.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13staging: greybus: minor code style fixManikantan Ravichandran
checkpatch warning fix for string split across lines Signed-off-by: Manikantan Ravichandran <ravman1991@gmail.com> Link: https://lore.kernel.org/r/20210212225035.GA16260@whach Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13staging:wlan-ng: use memdup_user instead of kmalloc/copy_from_userIvan Safonov
memdup_user() is shorter and safer equivalent of kmalloc/copy_from_user pair. Signed-off-by: Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20210213120527.451531-1-insafonov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13staging:r8188eu: use IEEE80211_FCTL_* kernel definitionsIvan Safonov
_TO_DS_, _FROM_DS_, _MORE_FRAG_, _RETRY_, _PWRMGT_, _MORE_DATA_, _PRIVACY_, _ORDER_ definitions are duplicate IEEE80211_FCTL_* kernel definitions. Signed-off-by: Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20210213131148.458582-1-insafonov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13staging: rtl8192e: remove multiple blank linesWilliam Durand
This patch removes some blank lines in order to fix a checkpatch issue. Signed-off-by: William Durand <will+git@drnd.me> Link: https://lore.kernel.org/r/20210213034711.14823-1-will+git@drnd.me Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13rtc: pcf8563: Add NXP PCA8565 compatibleMarek Vasut
The NXP PCA8565 is software compatible with the NXP PCF8563, add DT and ACPI compatible entries. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> To: linux-rtc@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210210220623.23233-1-marex@denx.de
2021-02-13Merge branch 'for-5.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Two cgroup fixes: - fix a NULL deref when trying to poll PSI in the root cgroup - fix confusing controller parsing corner case when mounting cgroup v1 hierarchies And doc / maintainer file updates" * 'for-5.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: update PSI file description in docs cgroup: fix psi monitor for root cgroup MAINTAINERS: Update my email address MAINTAINERS: Remove stale URLs for cpuset cgroup-v1: add disabled controller check in cgroup1_parse_param()
2021-02-13Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "6 patches. Subsystems affected by this patch series: mm/pagemap, scripts, MAINTAINERS, and h8300" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: h8300: fix PREEMPTION build, TI_PRE_COUNT undefined MAINTAINERS: add Andrey Konovalov to KASAN reviewers MAINTAINERS: update Andrey Konovalov's email address MAINTAINERS: update KASAN file list scripts/recordmcount.pl: support big endian for ARCH sh m68k: make __pfn_to_phys() and __phys_to_pfn() available for !MMU
2021-02-13Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "One more I2C driver bugfix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: stm32f7: fix configuration of the digital filter
2021-02-13Merge tag 'for-5.11-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "A regression fix caused by a refactoring in 5.11. A corrupted superblock wouldn't be detected by checksum verification due to wrongly placed initialization of the checksum length, thus making memcmp always work" * tag 'for-5.11-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: initialize fs_info::csum_size earlier in open_ctree
2021-02-13h8300: fix PREEMPTION build, TI_PRE_COUNT undefinedRandy Dunlap
Fix a build error for undefined 'TI_PRE_COUNT' by adding it to asm-offsets.c. h8300-linux-ld: arch/h8300/kernel/entry.o: in function `resume_kernel': (.text+0x29a): undefined reference to `TI_PRE_COUNT' Link: https://lkml.kernel.org/r/20210212021650.22740-1-rdunlap@infradead.org Fixes: df2078b8daa7 ("h8300: Low level entry") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-13MAINTAINERS: add Andrey Konovalov to KASAN reviewersAndrey Konovalov
Add my personal email address to KASAN reviewers list. Link: https://lkml.kernel.org/r/c1ce89a7aae0e2d6852249c280b1eb59aeac30c0.1613150186.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 14:50:11 +0000