summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-12of: Move all FDT reserved-memory handling into of_reserved_mem.cRob Herring
The split of /reserved-memory handling between fdt.c and of_reserved_mem.c makes for reading and restructuring the code difficult. As of_reserved_mem.c is only built for CONFIG_OF_EARLY_FLATTREE already, move all the code to one spot. Acked-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com> Link: https://lore.kernel.org/r/20240311181303.1516514-2-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2024-03-12io_uring: clean rings on NO_MMAP alloc failPavel Begunkov
We make a few cancellation judgements based on ctx->rings, so let's zero it afer deallocation for IORING_SETUP_NO_MMAP just like it's done with the mmap case. Likely, it's not a real problem, but zeroing is safer and better tested. Cc: stable@vger.kernel.org Fixes: 03d89a2de25bbc ("io_uring: support for user allocated memory for rings/sqes") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/9ff6cdf91429b8a51699c210e1f6af6ea3f8bdcf.1710255382.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-12io_uring/rw: return IOU_ISSUE_SKIP_COMPLETE for multishot retryJens Axboe
If read multishot is being invoked from the poll retry handler, then we should return IOU_ISSUE_SKIP_COMPLETE rather than -EAGAIN. If not, then a CQE will be posted with -EAGAIN rather than triggering the retry when the file is flagged as readable again. Cc: stable@vger.kernel.org Reported-by: Sargun Dhillon <sargun@meta.com> Fixes: fc68fcda04910 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-12Merge patch series "Support Andes PMU extension"Palmer Dabbelt
Yu Chien Peter Lin <peterlin@andestech.com> says: This patch series introduces the Andes PMU extension, which serves the same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt is assigned to bit 18 in the custom S-mode local interrupt enable and pending registers (slie/slip), while the interrupt cause is (256 + 18). * b4-shazam-merge: riscv: andes: Support specifying symbolic firmware and hardware raw events riscv: dts: renesas: Add Andes PMU extension for r9a07g043f dt-bindings: riscv: Add Andes PMU extension description perf: RISC-V: Introduce Andes PMU to support perf event sampling perf: RISC-V: Eliminate redundant interrupt enable/disable operations riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC dt-bindings: riscv: Add Andes interrupt controller compatible string riscv: errata: Rename defines for Andes Link: https://lore.kernel.org/r/20240222083946.3977135-1-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-12riscv: andes: Support specifying symbolic firmware and hardware raw eventsLocus Wei-Han Chen
Add the Andes AX45 JSON files that allows specifying symbolic event names for the raw PMU events. Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com> Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Atish Patra <atishp@rivosinc.com> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20240222083946.3977135-11-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-12riscv: dts: renesas: Add Andes PMU extension for r9a07g043fYu Chien Peter Lin
xandespmu stands for Andes Performance Monitor Unit extension. Based on the added Andes PMU ISA string, the SBI PMU driver will make use of the non-standard irq source. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240222083946.3977135-10-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-12dt-bindings: riscv: Add Andes PMU extension descriptionYu Chien Peter Lin
Document the ISA string for Andes Technology performance monitor extension which provides counter overflow interrupt and mode filtering mechanisms. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20240222083946.3977135-9-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-12perf: RISC-V: Introduce Andes PMU to support perf event samplingYu Chien Peter Lin
Assign riscv_pmu_irq_num the value of (256 + 18) for the custome PMU and add SSCOUNTOVF and SIP alternatives to ALT_SBI_PMU_OVERFLOW() and ALT_SBI_PMU_OVF_CLEAR_PENDING() macros, respectively. To make use of Andes PMU extension, "xandespmu" needs to be appended to the riscv,isa-extensions for each cpu node in device-tree, and make sure CONFIG_ANDES_CUSTOM_PMU is enabled. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Co-developed-by: Locus Wei-Han Chen <locus84@andestech.com> Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20240222083946.3977135-8-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-12perf: RISC-V: Eliminate redundant interrupt enable/disable operationsYu Chien Peter Lin
The interrupt enable/disable operations are already performed by the IRQ chip functions riscv_intc_irq_unmask()/riscv_intc_irq_mask() during enable_percpu_irq()/disable_percpu_irq(). It can be done only once. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20240222083946.3977135-7-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-12riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTCYu Chien Peter Lin
The Andes hart-level interrupt controller (Andes INTC) allows AX45MP cores to handle custom local interrupts, such as the performance counter overflow interrupt. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240222083946.3977135-6-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-12dt-bindings: riscv: Add Andes interrupt controller compatible stringYu Chien Peter Lin
Add "andestech,cpu-intc" compatible string to indicate that Andes specific local interrupt is supported on the core, e.g. AX45MP cores have 3 types of non-standard local interrupt which can be handled in supervisor mode: - Slave port ECC error interrupt - Bus write transaction error interrupt - Performance monitor overflow interrupt These interrupts are enabled/disabled via a custom register SLIE instead of the standard interrupt enable register SIE. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20240222083946.3977135-5-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-12riscv: errata: Rename defines for AndesYu Chien Peter Lin
Use "ANDES" rather than "ANDESTECH" to unify the naming convention with directory, file names, Kconfig options and other definitions. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20240222083946.3977135-2-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-12Merge tag 'irq-for-riscv-02-23-24' of ↵Palmer Dabbelt
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-next INTC changes to consume for RISCV * tag 'irq-for-riscv-02-23-24' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/riscv-intc: Introduce Andes hart-level interrupt controller irqchip/riscv-intc: Allow large non-standard interrupt number
2024-03-12spi: Restore delays for non-GPIO chip selectJanne Grunau
SPI controller with integrated chip select handling still need to adhere to SPI device's CS setup, hold and inactive delays. For controller without set_cs_timing spi core shall handle the delays to avoid duplicated delay handling in each controller driver. Fixes a regression for the out of tree SPI controller and SPI HID transport on Apple M1/M1 Pro/Max notebooks. Fixes: 4d8ff6b0991d ("spi: Add multi-cs memories support in SPI core") Signed-off-by: Janne Grunau <j@jannau.net> Link: https://msgid.link/r/20240311-spi-cs-delays-regression-v1-1-0075020a90b2@jannau.net Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-12spi: lpspi: Avoid potential use-after-free in probe()Alexander Sverdlin
fsl_lpspi_probe() is allocating/disposing memory manually with spi_alloc_host()/spi_alloc_target(), but uses devm_spi_register_controller(). In case of error after the latter call the memory will be explicitly freed in the probe function by spi_controller_put() call, but used afterwards by "devm" management outside probe() (spi_unregister_controller() <- devm_spi_unregister() below). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 ... Call trace: kernfs_find_ns kernfs_find_and_get_ns sysfs_remove_group sysfs_remove_groups device_remove_attrs device_del spi_unregister_controller devm_spi_unregister release_nodes devres_release_all really_probe driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://msgid.link/r/20240312112050.2503643-1-alexander.sverdlin@siemens.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-12regulator: core: Propagate the regulator state in case of exclusive getKory Maincent
Previously, performing an exclusive get on an already-enabled regulator resulted in inconsistent state initialization between child and parent regulators. While the child's counts were updated, its parent's counters remained unaffected. Consequently, attempting to disable an already-enabled exclusive regulator triggered unbalanced disables warnings from its parent regulator. This commit addresses the issue by propagating the enable state to the parent regulator using a regulator_enable call. This ensures consistent state management across the regulator hierarchy, preventing warnings! Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://msgid.link/r/20240312091638.1266167-1-kory.maincent@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-12ASoC: dt-bindings: cirrus,cs42l43: Fix 'gpio-ranges' schemaRob Herring
'gpio-ranges' is a phandle-array which is really a matrix. The schema in cirrus,cs42l43 is incomplete as it doesn't define there's only a single entry. Add the outer array constraints that there is a single entry. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://msgid.link/r/20240311222554.1940567-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-12dm: call the resume method on internal suspendMikulas Patocka
There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is caused by the fact that the postsuspend and resume methods were not paired correctly; there were two consecutive calls to the origin_postsuspend function. The second call attempts to remove the "hash_list" entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it calls the preresume and resume methods of the table's targets. If a preresume method of some target fails, we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return errors. We can't return success, because then the "resume" and "postsuspend" methods would not be paired correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools, but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0 Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ? do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ? __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0 [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot] dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0 [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10 [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]--- Fixes: ffcc39364160 ("dm: enhance internal suspend and resume interface") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-12dm raid: fix false positive for requeue needed during reshapeMing Lei
An empty flush doesn't have a payload, so it should never be looked at when considering to possibly requeue a bio for the case when a reshape is in progress. Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target") Reported-by: Patrick Plenefisch <simonpatp@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-12entry: Respect changes to system call number by trace_sys_enter()André Rösti
When a probe is registered at the trace_sys_enter() tracepoint, and that probe changes the system call number, the old system call still gets executed. This worked correctly until commit b6ec41346103 ("core/entry: Report syscall correctly for trace and audit"), which removed the re-evaluation of the syscall number after the trace point. Restore the original semantics by re-evaluating the system call number after trace_sys_enter(). The performance impact of this re-evaluation is minimal because it only takes place when a trace point is active, and compared to the actual trace point overhead the read from a cache hot variable is negligible. Fixes: b6ec41346103 ("core/entry: Report syscall correctly for trace and audit") Signed-off-by: André Rösti <an.roesti@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240311211704.7262-1-an.roesti@gmail.com
2024-03-12drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to headerMax Kellermann
When `CONFIG_DEBUG_FS` is disabled, nmk_gpio_dbg_show_one() is an empty dummy function; this however triggers a `-Wmissing-prototypes` warning and later a linker error because the function is also used by drivers/pinctrl/nomadik/pinctrl-nomadik.c, therefore it needs to be non-static. To allow both sources to access this dummy function, this patch moves it to the header, adding the `#ifdef CONFIG_DEBUG_FS` there as well. Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Link: https://lore.kernel.org/r/20240311133223.3429428-1-max.kellermann@ionos.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-03-12gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()Dan Carpenter
Using BUG_ON() is discouraged and also the check wasn't done early enough to prevent an out of bounds access. Check earlier and return an error instead of calling BUG(). Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/ae643df0-3a3e-4270-8dbf-be390ee4b478@moroto.mountain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-03-12ALSA: aaci: Delete unused variable in aaci_do_suspendThomas Weißschuh
The variable aaci is not used anymore and can be deleted. Fixes: 792a6c51875c ("[ALSA] Fix PM support") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://lore.kernel.org/r/20240312-aaci-unused-v1-1-09be643f67c2@linutronix.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-12platform/x86/intel/pmc: Improve PKGC residency counters debugKane Chen
The current code only prints PKGC-10 residency when the PKGC-10 is not reached in previous 'freeze' attempt. To debug PKGC-10 issues, we also need to know other PKGC residency counters to better triage issues. Ex: 1. When system is stuck in PC2, it can be caused short LTR from device. 2. When system is stuck in PC8, it can be caused by display engine. To better triage issues, all PKGC residency are needed when issues happen. Example log: CPU did not enter Package C10!!! (Package C10 cnt=0x0) Prev Package C2 cnt = 0x2191a325de, Current Package C2 cnt = 0x21aba30724 Prev Package C3 cnt = 0x0, Current Package C3 cnt = 0x0 Prev Package C6 cnt = 0x0, Current Package C6 cnt = 0x0 Prev Package C7 cnt = 0x0, Current Package C7 cnt = 0x0 Prev Package C8 cnt = 0x0, Current Package C8 cnt = 0x0 Prev Package C9 cnt = 0x0, Current Package C9 cnt = 0x0 Prev Package C10 cnt = 0x0, Current Package C10 cnt = 0x0 With this log, we can know whether it's a stuck PC2 issue, and we can check whether the short LTR from device causes the issue. Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240308033127.1013053-1-kane.chen@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86: asus-wmi: Consider device is absent when the read is ~0Kai-Heng Feng
AAEON PICO-TGU4 board doesn't have any LED but there are bogus LED controls under /sys/class/leds: $ ls /sys/class/leds asus::kbd_backlight asus::lightbar platform::micmute The reason is that the ~0 read from asus_wmi_get_devstate() is treated as a valid state, in truth it means the device is absent. So filter out ~0 read to prevent bogus LED controls being created. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240308053255.224496-1-kai.heng.feng@canonical.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12Documentation/x86/amd/hsmp: Updating urlsErwan Velu
When reading this page, some links were broken. This commit updates links to get documentation actually pointing the intended content. Signed-off-by: Erwan Velu <e.velu@criteo.com> Link: https://lore.kernel.org/r/20240307133601.103521-1-e.velu@criteo.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12Merge tag 'platform-drivers-x86-v6.8-4' into pdx86/for-nextIlpo Järvinen
Merge tag 'platform-drivers-x86-v6.8-4' fixes into pdx86/for-next to resolve amd/pmf conflicts.
2024-03-12i2c: nomadik: sort includesThéo Lebrun
Sort #include statements in i2c-nomadik driver. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-12i2c: nomadik: support Mobileye EyeQ5 I2C controllerThéo Lebrun
Add compatible for the integration of the same DB8500 IP block into the Mobileye EyeQ5 platform. Two quirks are present: - The memory bus only supports 32-bit accesses. Avoid writeb() and readb() by introducing helper functions that fallback to writel() and readl(). - A register must be configured for the I2C speed mode; it is located in a shared register region called OLB. We access that memory region using a syscon & regmap that gets passed as a phandle (mobileye,olb). A two-bit enum per controller is written into the register; that requires us to know the global index of the I2C controller (cell arg to the mobileye,olb phandle). We add #include <linux/mfd/syscon.h> and <linux/regmap.h>. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-12i2c: nomadik: fetch i2c-transfer-timeout-us property from devicetreeThéo Lebrun
Allow overriding the default timeout value (200ms) from devicetree, using the generic i2c-transfer-timeout-us property. The i2c_adapter->timeout field is an unaccurate jiffies amount; i2c-nomadik uses hrtimers for timeouts below one jiffy. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-12i2c: nomadik: replace jiffies by ktime for FIFO flushing timeoutThéo Lebrun
The FIFO flush function uses a jiffies amount to detect timeouts as the flushing is async. Replace with ktime to get more accurate precision and support short timeouts. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-12i2c: nomadik: support short xfer timeouts using waitqueue & hrtimerThéo Lebrun
Replace the completion by a waitqueue for synchronization from IRQ handler to task. For short timeouts, use hrtimers, else use timers. Usecase: avoid blocking the I2C bus for too long when an issue occurs. The threshold picked is one jiffy: if timeout is below that, use hrtimers. This threshold is NOT configurable. Implement behavior but do NOT change fetching of timeout. This means the timeout is unchanged (200ms) and the hrtimer case will never trigger. A waitqueue is used because it supports both desired timeout approaches. See wait_event_timeout() and wait_event_hrtimeout(). An atomic boolean serves as synchronization condition. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-12i2c: nomadik: use bitops helpersThéo Lebrun
Constant register bit fields are declared using hardcoded hex values; replace them by calls to BIT() and GENMASK(). Replace custom GEN_MASK() macro by the generic FIELD_PREP(). Replace manual bit manipulations by the generic FIELD_GET() macro. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-12i2c: nomadik: simplify IRQ masking logicThéo Lebrun
IRQ_MASK and I2C_CLEAR_ALL_INTS both mask available interrupts. IRQ_MASK removes top options (bits 29-31). I2C_CLEAR_ALL_INTS removes reserved options including top bits. Keep the latter. 31 29 27 25 23 21 19 17 15 13 11 09 07 05 03 01 30 28 26 24 22 20 18 16 14 12 10 08 06 04 02 00 -- IRQ_MASK: --------------------------------------------------- 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 -- I2C_CLEAR_ALL_INTS: ----------------------------------------- 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Notice I2C_CLEAR_ALL_INTS is more restrictive than IRQ_MASK. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-12platform/mellanox: mlxreg-hotplug: Remove redundant NULL-checkDaniil Dulov
Pointer item is checked fo NULL at mlxreg_hotplug_work_helper() and then it is dereferenced to produce dev_err(). This pointer is also dereferenced before calling this function and should never be NULL except some piece of hardware is broken as it is said in the comment before the check. So, this check can be safely removed. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface") Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20240306153804.6509-1-d.dulov@aladdin.ru Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86/amd/pmf: Update sps power thermals according to the ↵Shyam Sundar S K
platform-profiles Update power thermals according to the platform-profiles selected by the user. Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20240306114415.3267603-8-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86/amd/pmf: Add support to get sps default APTS index valuesShyam Sundar S K
During the driver probe, the default cache values for the static slider would be obtained by evaluating the APTS method. Add support to use these values as the thermal settings to be updated on the system based on the changing platform-profiles. Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20240306114415.3267603-7-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86/amd/pmf: Add support to get APTS index numbers for static sliderShyam Sundar S K
APMF spec has a newer section called the APTS (AMD Performance and Thermal State) information, where each slider/power mode is associated with an index number. Add support to get these indices for the Static Slider. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20240306114415.3267603-6-Shyam-sundar.S-k@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86/amd/pmf: Add support to notify sbios heart beat eventShyam Sundar S K
Add support for newer revision of the heart beat notify events. This event is used to notify to the OEM BIOS on driver load/unload/suspend/resume scenarios. If OEM BIOS does not receive the heart beat event from PMF driver, OEM BIOS shall conclude that PMF driver is no more active and BIOS will update to the legacy system power thermals. Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20240306114415.3267603-5-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86/amd/pmf: Add support to get sbios requests in PMF driverShyam Sundar S K
Update the APMF function index 2 for family 1Ah, that gets the information of SBIOS requests (like the pending requests from BIOS, custom notifications, updation of power limits etc). Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20240306114415.3267603-4-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86/amd/pmf: Disable debugfs support for querying power thermalsShyam Sundar S K
The GET interface to receive the active power thermal information from the PMFW has been deprecated. Hence drop the debugfs support from version2 onwards. Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20240306114415.3267603-3-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86/amd/pmf: Differentiate PMF ACPI versionsShyam Sundar S K
For family 1AH, certain PMF features have been enhanced - leading to a newer APMF (AMD PMF) spec (BIOS and PMF driver interface) called v2. This information would be fed into the if_version field of the verify_interface method of the APMF call from the BIOS. Use this information to store the version number to differentiate between v1 or v2 and also store the information into the PMF private data structure, as this information would be required for further code branching to support the latest silicon. Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20240306114415.3267603-2-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12x86/platform/atom: Check state of Punit managed devices on s2idleJohannes Stezenbach
For the Bay Trail or Cherry Trail SoC to enter the S0i3 power-level at s2idle suspend requires most of the hw-blocks / devices in the SoC to be in D3 when entering s2idle suspend. If some devices are not in D3 then the SoC will stay in a higher power state, consuming much more power from the battery then in S0i3. Use the new acpi_s2idle_dev_ops and acpi_register_lps0_dev() functionality to register a new s2idle check function which checks that all hardware blocks in the North complex (controlled by Punit) are in a state that allows the SoC to enter S0i3 and prints an error message for any device in D0. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: "Borislav Petkov (AMD)" <bp@alien8.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [hdegoede: Use acpi_s2idle_dev_ops] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240305105915.76242-6-hdegoede@redhat.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86: pmc_atom: Check state of PMC clocks on s2idleHans de Goede
Extend the s2idle check with checking that none of the PMC clocks is in the forced-on state. If one of the clocks is in forced on state then S0i3 cannot be reached. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240305105915.76242-5-hdegoede@redhat.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86: pmc_atom: Check state of PMC managed devices on s2idleJohannes Stezenbach
For the Bay Trail or Cherry Trail SoC to enter the S0i3 power-level at s2idle suspend requires most of the hw-blocks / devices in the SoC to be in D3 when entering s2idle suspend. If some devices are not in D3 then the SoC will stay in a higher power state, consuming much more power from the battery then in S0i3. Use the new acpi_s2idle_dev_ops and acpi_register_lps0_dev() functionality to register a new s2idle check function which checks that all hardware blocks in the South complex (controlled by the PMC) are in a state that allows the SoC to enter S0i3 and prints an error message for any device in D0. Some blocks are not used on lower-featured versions of the SoC and these blocks will always report being in D0 on SoCs were they are not used. A false-positive mask is used to identify these blocks and for blocks in this mask the error is turned into a debug message to avoid false-positive error messages. Note the pmc_atom code is enabled by CONFIG_X86_INTEL_LPSS which already depends on ACPI. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [hdegoede: Use acpi_s2idle_dev_ops, ignore fused off blocks, PMIC I2C] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240305105915.76242-4-hdegoede@redhat.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86: pmc_atom: Annotate d3_sts register bit definesHans de Goede
The include/linux/platform_data/x86/pmc_atom.h d3_sts register bit defines are named after how these bits are used on Bay Trail devices. On Cherry Trail (CHT) devices some of these bits have a different meaning according to the datasheet. At a comment to the defines for bits which have a different meaning on Cherry Trail devices. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240305105915.76242-3-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12clk: x86: Move clk-pmc-atom register defines to ↵Hans de Goede
include/linux/platform_data/x86/pmc_atom.h Move the register defines for the Atom (Bay Trail, Cherry Trail) PMC clocks to include/linux/platform_data/x86/pmc_atom.h. This is a preparation patch to extend the S0i3 readiness checks in drivers/platform/x86/pmc_atom.c with checking that the PMC clocks are off on suspend entry. Note these are added to include/linux/platform_data/x86/pmc_atom.h rather then to include/linux/platform_data/x86/clk-pmc-atom.h because the former already has all the other Atom PMC register defines. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240305105915.76242-2-hdegoede@redhat.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86: make fw_attr_class constantRicardo B. Marliere
Since commit 43a7206b0963 ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the fw_attr_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240305-class_cleanup-platform-v1-1-9085c97b9355@marliere.net Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86/intel/tpmi: Change vsec offset to u64Srinivas Pandruvada
The vsec offset can be 64 bit long depending on the PFS start. So change type to u64. Also use 64 bit formatting for seq_printf. Fixes: 47731fd2865f ("platform/x86/intel: Intel TPMI enumeration driver") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: stable@vger.kernel.org # v6.3+ Link: https://lore.kernel.org/r/20240305194644.2077867-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-12platform/x86: intel_scu_pcidrv: Remove unused intel-mid.hAndy Shevchenko
intel-mid.h is providing some core parts of the South Complex PM, which are usually not used by individual drivers. In particular, this driver doesn't use it, so simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20240305161539.1364717-3-andriy.shevchenko@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 22:13:07 +0000