| Age | Commit message (Collapse) | Author |
|---|
|
As I'm doing more and more work professionally, move away from my
private mail address.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20231219091218.2846297-1-michael@walle.cc
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
|
|
BFPT 17th DWORD contains the information about 1-1-8 and 1-8-8.
Parse BFPT DWORD[17] instruction to determine whether flash
supports 1-1-8 and 1-8-8, and set its dummy cycles accordingly.
Validated only the 1-1-8 read using a macronix flash with
Xilinx board zynq-picozed.
Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20231219102103.92738-2-jaimeliao.tw@gmail.com
[ta: update commit message, get rid of extra dereference]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we fail to allocate because of insufficient open buckets, we don't
want to retry from the full set of devices - we just want to retry in
blocking mode.
But if the retry in blocking mode fails with a different error code, we
end up squashing the -BCH_ERR_open_buckets_empty error with an error
that makes us thing we won't be able to allocate (insufficient_devices)
- which is incorrect when we didn't try to allocate from the full set of
devices, and causes the write to fail.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Some masters may drive the transfers with low enough latency between
the nak/stop phase of the current command and the start/address phase
of the following command that the interrupts are coalesced by the
time we process them.
Handle the stop conditions before processing SLAVE_MATCH to fix the
complaints that sometimes occur below.
"aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
0x00000086, but was 0x00000084"
Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
the nvme_handle_cqe() interrupt handler calls nvme_complete_async_event()
but the latter may call nvme_auth_stop() which is a blocking function.
Sleeping functions can't be called in interrupt context
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/15
Call Trace:
<IRQ>
__cancel_work_timer+0x31e/0x460
? nvme_change_ctrl_state+0xcf/0x3c0 [nvme_core]
? nvme_change_ctrl_state+0xcf/0x3c0 [nvme_core]
nvme_complete_async_event+0x365/0x480 [nvme_core]
nvme_poll_cq+0x262/0xe50 [nvme]
Fix the bug by moving nvme_auth_stop() to fw_act_work
(executed by the nvme_wq workqueue)
Fixes: f50fff73d620 ("nvme: implement In-Band authentication")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Users may disable HWP in firmware, in which case intel_pstate will give up
unless the CPU model is explicitly supported.
See also the following past commits:
- commit df51f287b5de ("cpufreq: intel_pstate: Add Sapphire Rapids support
in no-HWP mode")
- commit d8de7a44e11f ("cpufreq: intel_pstate: Add Skylake servers support")
- commit 706c5328851d ("cpufreq: intel_pstate: Add Cometlake support in
no-HWP mode")
- commit fbdc21e9b038 ("cpufreq: intel_pstate: Add Icelake servers support in
no-HWP mode")
- commit 71bb5c82aaae ("cpufreq: intel_pstate: Add Tigerlake support in
no-HWP mode")
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Idle bo's PTE needs to be re-created when resetting VM state machine.
Set idle bo's vm_bo as moved to mark it as invalid.
Fixes: 55bf196f60df ("drm/amdgpu: reset VM when an error is detected")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"While working on the ring buffer, I found one more bug with the
timestamp code, and the fix for this removed the need for the final
64-bit cmpxchg!
The ring buffer events hold a "delta" from the previous event. If it
is determined that the delta can not be calculated, it falls back to
adding an absolute timestamp value. The way to know if the delta can
be used is via two stored timestamps in the per-cpu buffer meta data:
before_stamp and write_stamp
The before_stamp is written by every event before it tries to allocate
its space on the ring buffer. The write_stamp is written after it
allocates its space and knows that nothing came in after it read the
previous before_stamp and write_stamp and the two matched.
A previous fix dd9394257078 ("ring-buffer: Do not try to put back
write_stamp") removed putting back the write_stamp to match the
before_stamp so that the next event could use the delta, but races
were found where the two would match, but not be for of the previous
event.
It was determined to allow the event reservation to not have a valid
write_stamp when it is finished, and this fixed a lot of races.
The last use of the 64-bit timestamp cmpxchg depended on the
write_stamp being valid after an interruption. But this is no longer
the case, as if an event is interrupted by a softirq that writes an
event, and that event gets interrupted by a hardirq or NMI and that
writes an event, then the softirq could finish its reservation without
a valid write_stamp.
In the slow path of the event reservation, a delta can still be used
if the write_stamp is valid. Instead of using a cmpxchg against the
write stamp, the before_stamp needs to be read again to validate the
write_stamp. The cmpxchg is not needed.
This updates the slowpath to validate the write_stamp by comparing it
to the before_stamp and removes all rb_time_cmpxchg() as there are no
more users of that function.
The removal of the 32-bit updates of rb_time_t will be done in the
next merge window"
* tag 'trace-v6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix slowpath of interrupted event
|
|
[Why]
Driver incorrectly checks if pointer variable OutBpp is null instead of
if the value being pointed to is zero.
[How]
Dereference OutBpp before checking for a value of zero.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
we have two SSC_En:
we get ssc_info from dce_info for MPLL_SSC_EN.
we used to call VBIOS cmdtbl's smu_info's SS persentage for DPRECLK SS info,
is used for DP AUDIO and VBIOS' smu_info table was from systemIntegrationInfoTable.
since dcn35 VBIOS removed smu_info, driver need to use integrationInfotable directly.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & how]
Refactor dc_is_dmub_outbox_supported() a bit and add case for dcn35 to
register dmub outbox notification irq to handle usb4 relevant hpd event.
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There have recently been changes that break backwards compatibility,
that were introduced into DMUB firmware (for DCN32x) concerning FPO and
SubVP. So, since those are just power optimization features, we can just
disable them unless the user is using a new enough version of DMUB
firmware.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2870
Fixes: ed6e2782e974 ("drm/amd/display: For cursor P-State allow for SubVP")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/r/CABXGCsNRb0QbF2pKLJMDhVOKxyGD6-E+8p-4QO6FOWa6zp22_A@mail.gmail.com/
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On gfx943 APU there is no VRAM and page migration, queue CWSR area, svm
range with always mapped flag, is not mapped to GPU correctly. This
works fine if retry fault on CWSR area can be recovered, but could cause
deadlock if there is another retry fault recover waiting for CWSR to
finish.
Fix this by mapping svm range with always mapped flag to GPU with ACCESS
attribute if XNACK ON.
There is side effect, because all GPUs have ACCESS attribute by default
on new svm range with XNACK on, the CWSR area will be mapped to all GPUs
after this change. This side effect will be fixed with Thunk change to
set CWSR svm range with ACCESS_IN_PLACE attribute on the GPU that user
queue is created.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- build error for hugetlb, sparse and smatch fixes
- removal of VIPT aliasing cache code
* tag 'arc-6.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: add hugetlb definitions
ARC: fix smatch warning
ARC: fix spare error
ARC: mm: retire support for aliasing VIPT D$
ARC: entry: move ARCompact specific bits out of entry.h
ARC: entry: SAVE_ABI_CALLEE_REG: ISA/ABI specific helper
|
|
table 3.0"
[Description]
Revert commit fec05adc40c2 ("drm/amd/display: Use channel_width = 2 for vram table 3.0")
Because the issue is being fixed from VBIOS side.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The core freezer logic has been modified by commit f5d39b020809
("freezer,sched: Rewrite core freezer logic"), so adjust the
documentation to reflect the new code. The main changes include:
- Drop references to PF_FROZEN and PF_FREEZER_SKIP
- Describe TASK_FROZEN, TASK_FREEZABLE and __TASK_FREEZABLE_UNSAFE
- Replace system_freezing_cnt with freezer_active
- Use a different example for the loop of a freezable kernel thread,
since the old code is gone gone
Signed-off-by: Kevin Hao <haokexin@gmail.com>
[ rjw: Subject and changelog edits, doc text adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
kmap_atomic() has been deprecated in favor of kmap_local_page().
kmap_atomic() disables page-faults and preemption (the latter
only for !PREEMPT_RT kernels).The code between the mapping and
un-mapping in this patch does not depend on the above-mentioned
side effects.So simply replaced kmap_atomic() with kmap_local_page().
Signed-off-by: Chen Haonan <chen.haonan2@zte.com.cn>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add Sierra Forest SoC C-states, which are C1, C1E, C6S, and C6SP.
Sierra Forest SoC is built with modules, each module includes 4 cores
(Crestmont microarchitecture). There is one L2 cache per module, shared
between the 4 cores.
There is no core C6 state, but there is C6S state, which has module scope:
when all 4 cores request C6S, the entire module (4 cores + L2 cache)
enters the low power state.
C6SP state has package scope - when all modules in the package enter C6S,
the package enters the power state mode.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add Intel Grand Ridge SoC C-states, which are C1, C1E, and C6S.
The Grand Ridge SoC is built with modules, each module includes 4 cores
(Crestmont microarchitecture). There is one L2 cache per module, shared
between the 4 cores.
There is no core C6 state, but there is C6S state, which has module
scope: when all 4 cores request C6S, the entire module (4 cores + L2
cache) enters the low power state.
Package C6 is not supported by Grand Ridge SoC.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI LPSS driver and the Surface platform driver code use almost the
same code pattern for checking if one ACPI device is present in the list
returned by _DEP for another ACPI device.
To reduce the resulting code duplication, introduce a helper for that
called acpi_device_dep() and invoke it from both places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Possible deadlock scenario (on reboot):
rk3x_i2c_xfer_common(polling)
-> rk3x_i2c_wait_xfer_poll()
-> rk3x_i2c_irq(0, i2c);
--> spin_lock(&i2c->lock);
...
<rk3x i2c interrupt>
-> rk3x_i2c_irq(0, i2c);
--> spin_lock(&i2c->lock); (deadlock here)
Store the IRQ number and disable/enable it around the polling transfer.
This patch has been tested on NanoPC-T4.
Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add missing clk_disable_unprepare() and geni_se_resources_off() in the error
path in geni_i2c_probe().
Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
cifs_chan_update_iface is meant to check and update the server
interface used for a channel when the existing server interface
is no longer available.
So far, this handler had the code to remove an interface entry
even if a new candidate interface is not available. Allowing
this leads to several corner cases to handle.
This change makes the logic much simpler by not deallocating
the current channel interface entry if a new interface is not
found to replace it with.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The following commit reverted the changes to ref count
the server struct while scheduling a reconnect work:
823342524868 Revert "cifs: reconnect work should have reference on server struct"
However, a following change also introduced scheduling
of reconnect work, and assumed ref counting. This change
fixes that as well.
Fixes umount problems like:
[73496.157838] CPU: 5 PID: 1321389 Comm: umount Tainted: G W OE 6.7.0-060700rc6-generic #202312172332
[73496.157841] Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET67W (1.50 ) 12/15/2022
[73496.157843] RIP: 0010:cifs_put_tcp_session+0x17d/0x190 [cifs]
[73496.157906] Code: 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc e8 4a 6e 14 e6 e9 f6 fe ff ff be 03 00 00 00 48 89 d7 e8 78 26 b3 e5 e9 e4 fe ff ff <0f> 0b e9 b1 fe ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90
[73496.157908] RSP: 0018:ffffc90003bcbcb8 EFLAGS: 00010286
[73496.157911] RAX: 00000000ffffffff RBX: ffff8885830fa800 RCX: 0000000000000000
[73496.157913] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[73496.157915] RBP: ffffc90003bcbcc8 R08: 0000000000000000 R09: 0000000000000000
[73496.157917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[73496.157918] R13: ffff8887d56ba800 R14: 00000000ffffffff R15: ffff8885830fa800
[73496.157920] FS: 00007f1ff0e33800(0000) GS:ffff88887ba80000(0000) knlGS:0000000000000000
[73496.157922] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[73496.157924] CR2: 0000115f002e2010 CR3: 00000003d1e24005 CR4: 00000000003706f0
[73496.157926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[73496.157928] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[73496.157929] Call Trace:
[73496.157931] <TASK>
[73496.157933] ? show_regs+0x6d/0x80
[73496.157936] ? __warn+0x89/0x160
[73496.157939] ? cifs_put_tcp_session+0x17d/0x190 [cifs]
[73496.157976] ? report_bug+0x17e/0x1b0
[73496.157980] ? handle_bug+0x51/0xa0
[73496.157983] ? exc_invalid_op+0x18/0x80
[73496.157985] ? asm_exc_invalid_op+0x1b/0x20
[73496.157989] ? cifs_put_tcp_session+0x17d/0x190 [cifs]
[73496.158023] ? cifs_put_tcp_session+0x1e/0x190 [cifs]
[73496.158057] __cifs_put_smb_ses+0x2b5/0x540 [cifs]
[73496.158090] ? tconInfoFree+0xc2/0x120 [cifs]
[73496.158130] cifs_put_tcon.part.0+0x108/0x2b0 [cifs]
[73496.158173] cifs_put_tlink+0x49/0x90 [cifs]
[73496.158220] cifs_umount+0x56/0xb0 [cifs]
[73496.158258] cifs_kill_sb+0x52/0x60 [cifs]
[73496.158306] deactivate_locked_super+0x32/0xc0
[73496.158309] deactivate_super+0x46/0x60
[73496.158311] cleanup_mnt+0xc3/0x170
[73496.158314] __cleanup_mnt+0x12/0x20
[73496.158330] task_work_run+0x5e/0xa0
[73496.158333] exit_to_user_mode_loop+0x105/0x130
[73496.158336] exit_to_user_mode_prepare+0xa5/0xb0
[73496.158338] syscall_exit_to_user_mode+0x29/0x60
[73496.158341] do_syscall_64+0x6c/0xf0
[73496.158344] ? syscall_exit_to_user_mode+0x37/0x60
[73496.158346] ? do_syscall_64+0x6c/0xf0
[73496.158349] ? exit_to_user_mode_prepare+0x30/0xb0
[73496.158353] ? syscall_exit_to_user_mode+0x37/0x60
[73496.158355] ? do_syscall_64+0x6c/0xf0
Reported-by: Robert Morris <rtm@csail.mit.edu>
Fixes: 705fc522fe9d ("cifs: handle when server starts supporting multichannel")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The commit was identified to might sleep in invalid context and is
blocking regression testing.
This reverts commit ee6fdc5055e916b1dd497f11260d4901c4c1e55e.
Link: https://lore.kernel.org/linux-nvme/hkhl56n665uvc6t5d6h3wtx7utkcorw4xlwi7d2t2bnonavhe6@xaan6pu43ap6/
Link: https://lists.infradead.org/pipermail/linux-nvme/2023-December/043756.html
Reported-by: Daniel Wagner <dwagner@suse.de>
Reported-by: Maurizio Lombardi <mlombard@redhat.com>
Cc: Michael Liang <mliang@purestorage.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Commit 9b9c5bea0b96 ("cifs: do not return atime less than mtime") indicates
that in cifs, if atime is less than mtime, some apps will break.
Therefore, it introduce a function to compare this two variables in two
places where atime is updated. If atime is less than mtime, update it to
mtime.
However, the patch was handled incorrectly, resulting in atime and mtime
being exactly equal. A previous commit 69738cfdfa70 ("fs: cifs: Fix atime
update check vs mtime") fixed one place and forgot to fix another. Fix it.
Fixes: 9b9c5bea0b96 ("cifs: do not return atime less than mtime")
Cc: stable@vger.kernel.org
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Validate SMB message with ->check_message() before calling
->calc_smb_size().
This fixes CVE-2023-6610.
Reported-by: j51569436@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218219
Cc; stable@vger.kernel.org
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
REGULATOR_LINEAR_RANGE() repeats what LINEAR_RANGE() provides.
Deduplicate the former by using the latter. No functional change
intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20231219154012.2478688-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 26195af57798 ("drm/bridge: ps8640: Drop the ability of
ps8640 to fetch the EDID"), I got an error compiling:
error: comparison of distinct pointer types
('typeof (len) *' (aka 'unsigned int *') and
'typeof (msg->size) *' (aka 'unsigned long *'))
[-Werror,-Wcompare-distinct-pointer-types]
Fix it by declaring the `len` as size_t.
The above error only shows up on downstream kernels without commit
d03eba99f5bf ("minmax: allow min()/max()/clamp() if the arguments have
the same signedness."), but since commit 26195af57798 ("drm/bridge:
ps8640: Drop the ability of ps8640 to fetch the EDID") is a "Fix" that
will likely be backported it seems nice to make it easy. ...plus it's
more correct to declare `len` as size_t anyway.
Fixes: 26195af57798 ("drm/bridge: ps8640: Drop the ability of ps8640 to fetch the EDID")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218090454.1.I5c6eb80b2f746439c4b58efab788e00701d08759@changeid
|
|
Digital signature based IMA-appraisal relies heavily on kernel keyrings.
Eric Snowberg has been involved in adding the machine keyring to allow
the system owner to add their own keys. With this addition,
IMA-appraisal usage can be extended to allow loading local and 3rd party
software keys onto the IMA keyring.
Add Eric as a reviewer.
Acked-by: Eric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Roberto Sassu has been actively involved in IMA and EVM since 2011.
His first major IMA contribution was IMA template support. He also
contributed extending TPM 2.0 PCRs with properly calculated per TPM
bank digests and included file metadata information in the IMA
measurement list.
Regarding EVM, Roberto contributed to making EVM portable and immutable
signatures more usable. He also prepared the LSM infrastructure to
support EVM as a fully fledged LSM, by ensuring that the latter receives
from the former all xattrs provided by other registered LSMs at inode
creation time, for HMAC calculation.
Roberto is currently working on making IMA and EVM full fledged LSMs.
Add Roberto as an IMA and EVM maintainer.
Acked-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Devicetree node names should be generic; fix up the
qcom,usb-vbus-regulator binding example accordingly.
While at it, drop an unnecessary label and add a newline separator
before the child node to improve readability.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20231219075749.25308-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When flag mclk_with_tere and mclk_direction_output enabled,
The SAI transmitter or receiver will be enabled in very early
stage, that if FSL_SAI_xMR is set by previous case,
for example previous case is one channel, current case is
two channels, then current case started with wrong xMR in
the beginning, then channel swap happen.
The patch is to clear xMR in hw_free() to avoid such
channel swap issue.
Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This fixes a problem introduced while fixing ELD reporting with no jack
set.
Most driver using the hdmi-codec will call the 'plugged_cb' callback
directly when registered to report the initial state of the HDMI connector.
With the commit mentionned, this occurs before jack is ready and the
initial report is lost for platforms actually providing a jack for HDMI.
Fix this by storing the hdmi connector status regardless of jack being set
or not and report the last status when jack gets set.
With this, the initial state is reported correctly even if it is
disconnected. This was not done initially and is also a fix.
Fixes: 15be353d55f9 ("ASoC: hdmi-codec: register hpd callback on component probe")
Reported-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com/
Cc: Hsin-Yi Wang <hsinyi@google.com>
Tested-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20231218145655.134929-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'check-vlan-filter-feature-in-vlan_vids_add_by_dev-and-vlan_vids_del_by_dev'
Liu Jian says:
====================
check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
v2->v3:
Filter using vlan_hw_filter_capable().
Add one basic test.
====================
Link: https://lore.kernel.org/r/20231216075219.2379123-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add one basic vlan hw filter test.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vlan_vids_del_by_dev()
I got the below warning trace:
WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
rtnl_dellink
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
__sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
entry_SYSCALL_64_after_hwframe
It can be repoduced via:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode 0
ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
ip netns del ns1
This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.
To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.
Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When an interface is removed, we should also be deleting the driver
debugfs entries (as it might still exist in DOWN state in mac80211). At
the same time, when adding an interface, we can check the
IEEE80211_SDATA_IN_DRIVER flag to know whether the interface was
previously known to the driver and is simply being reconfigured.
Fixes: a1f5dcb1c0c1 ("wifi: mac80211: add a driver callback to add vif debugfs")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220043149.a9f64c359424.I7076526b5297ae8f832228079c999f7b8e147a4c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The driver debugfs entries still exist when the interface is re-added
during reconfiguration. This can be either because of a HW restart
(in_reconfig) or because we are resuming.
Fixes: a1f5dcb1c0c1 ("wifi: mac80211: add a driver callback to add vif debugfs")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220043149.ddd48c66ec6b.Ia81080d92129ceecf462eceb4966bab80df12060@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
While looking at a Xen Kconfig dependency issue, I tried to understand the
exact dependencies for CONFIG_X86_PAE, which is selected by CONFIG_HIGHMEM64G
but can also be enabled manually.
Apparently the dependencies for CONFIG_HIGHMEM64G are strictly about CPUs
that do support PAE, but the actual feature can be incorrectly enabled on
older CPUs as well. The CONFIG_X86_CMPXCHG64 dependencies on the other hand
include X86_PAE because cmpxchg8b is requried for PAE to work.
Rework this for readability and correctness, using a positive list of CPUs
that support PAE in a new X86_HAVE_PAE symbol that can serve as a dependency
for both X86_PAE and HIGHMEM64G as well as simplify the X86_CMPXCHG64
dependency list.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231204084722.3789473-2-arnd@kernel.org
|
|
Jijie Shao will be responsible for
maintaining the hns3 driver's code in the future,
so add Jijie to the hns3 driver's matainer list.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20231216070413.233668-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Mana uses PAGE_POOL API. x86_64 defconfig doesn't select it:
ld: vmlinux.o: in function `mana_create_page_pool.isra.0':
mana_en.c:(.text+0x9ae36f): undefined reference to `page_pool_create'
ld: vmlinux.o: in function `mana_get_rxfrag':
mana_en.c:(.text+0x9afed1): undefined reference to `page_pool_alloc_pages'
make[3]: *** [/home/yury/work/linux/scripts/Makefile.vmlinux:37: vmlinux] Error 1
make[2]: *** [/home/yury/work/linux/Makefile:1154: vmlinux] Error 2
make[1]: *** [/home/yury/work/linux/Makefile:234: __sub-make] Error 2
make[1]: Leaving directory '/home/yury/work/build-linux-x86_64'
make: *** [Makefile:234: __sub-make] Error 2
So we need to select it explicitly.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter")
Link: https://lore.kernel.org/r/20231215203353.635379-1-yury.norov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fsl,tmu-calibration is defined as a u32 matrix in
Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml.
Use matching property syntax. No functional changes.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212184515.82886-2-david@ixit.cz
|
|
There is a bug in the ks8851 Ethernet driver that more data is written
to the hardware TX buffer than actually available. This is caused by
wrong accounting of the free TX buffer space.
The driver maintains a tx_space variable that represents the TX buffer
space that is deemed to be free. The ks8851_start_xmit_spi() function
adds an SKB to a queue if tx_space is large enough and reduces tx_space
by the amount of buffer space it will later need in the TX buffer and
then schedules a work item. If there is not enough space then the TX
queue is stopped.
The worker function ks8851_tx_work() dequeues all the SKBs and writes
the data into the hardware TX buffer. The last packet will trigger an
interrupt after it was send. Here it is assumed that all data fits into
the TX buffer.
In the interrupt routine (which runs asynchronously because it is a
threaded interrupt) tx_space is updated with the current value from the
hardware. Also the TX queue is woken up again.
Now it could happen that after data was sent to the hardware and before
handling the TX interrupt new data is queued in ks8851_start_xmit_spi()
when the TX buffer space had still some space left. When the interrupt
is actually handled tx_space is updated from the hardware but now we
already have new SKBs queued that have not been written to the hardware
TX buffer yet. Since tx_space has been overwritten by the value from the
hardware the space is not accounted for.
Now we have more data queued then buffer space available in the hardware
and ks8851_tx_work() will potentially overrun the hardware TX buffer. In
many cases it will still work because often the buffer is written out
fast enough so that no overrun occurs but for example if the peer
throttles us via flow control then an overrun may happen.
This can be fixed in different ways. The most simple way would be to set
tx_space to 0 before writing data to the hardware TX buffer preventing
the queuing of more SKBs until the TX interrupt has been handled. I have
chosen a slightly more efficient (and still rather simple) way and
track the amount of data that is already queued and not yet written to
the hardware. When new SKBs are to be queued the already queued amount
of data is honoured when checking free TX buffer space.
I tested this with a setup of two linked KS8851 running iperf3 between
the two in bidirectional mode. Before the fix I got a stall after some
minutes. With the fix I saw now issues anymore after hours.
Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231214181112.76052-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The vec-syscfg selftest verifies that setting the VL of the currently
tested vector type does not disrupt the VL of the other vector type. To do
this it records the current vector length for each type but neglects to
guard this with a check for that vector type actually being supported. Add
one, using a helper function which we also update all the other instances
of this pattern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231218-kselftest-arm64-vec-syscfg-rdvl-v1-1-0ac22d47e81f@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
You do not need to use $(shell ...) in recipe lines, as they are already
executed in a shell. An alternative solution is $$(...), which is an
escaped sequence of the shell's command substituion, $(...).
For this case, there is a reason to avoid $(shell ...).
Kbuild detects command changes by using the if_changed macro, which
compares the previous command recorded in .*.cmd with the current
command from Makefile. If they differ, Kbuild re-runs the build rule.
To diff the commands, Make must expand $(shell ...) first. It means that
hexdump is executed every time, even when nothing needs rebuilding. If
Kbuild determines that vmlinux.bin needs rebuilding, hexdump will be
executed again to evaluate the 'cmd' macro, one more time to really
build vmlinux.bin, and finally yet again to record the expanded command
into .*.cmd.
Replace $(shell ...) with $$(...) to avoid multiple, unnecessay shell
evaluations. Since Make is agnostic about the shell code, $(...), the
if_changed macro compares the string "$(hexdump -s16 -n4 ...)" verbatim,
so hexdump is run only for building vmlinux.bin.
For the same reason, $(shell ...) in EFI_ZBOOT_OBJCOPY_FLAGS should be
eliminated.
While I was here, I replaced '&&' with ';' because a command for
if_changed is executed with 'set -e'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231218080127.907460-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
