| Age | Commit message (Collapse) | Author |
|---|
|
Pull smb client fixes from Steve French:
- fscache fix
- fix for case where we could use uninitialized lease
- add tracepoint for debugging refcounting of tcon
- fix mount option regression (e.g. forceuid vs. noforceuid when uid=
specified) caused by conversion to the new mount API
* tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: reinstate original behavior again for forceuid/forcegid
smb: client: fix rename(2) regression against samba
cifs: Add tracing for the cifs_tcon struct refcounting
cifs: Fix reacquisition of volume cookie on still-live connection
|
|
Make SVM BOs more likely to get evicted than other BOs. These BOs
opportunistically use available VRAM, but can fall back relatively
seamlessly to system memory. It also avoids SVM migrations evicting
other, more important BOs as they will evict other SVM allocations
first.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c: dcn32/dcn32_clk_mgr.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8789
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Avoid returning an uninitialized value if we never enter the loop.
This case should never be hit in practice, but returning 0 doesn't
hurt.
The same fix is applied to the 4 places using the same pattern.
v2: - fixed typos in commit message (Alex)
- use "return 0;" before the done label instead of initializing
r to 0
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Makes it easier to review the logs when there are MES
errors.
v2: use dbg for emitted, add helpers for fetching strings
v3: fix missing commas (Harish)
v4: drop command prefixes (Felix)
v5: squash in bounds fix (Jun)
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed by Shaoyun.liu <Shaoyun.liu@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The vpe dpm settings should be done before firmware is loaded.
Otherwise, the frequency cannot be successfully raised.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
HDP Flush request bit can be kept unique per AID, and doesn't need to be
unique SOC-wide. Assign only bits 10-13 for SDMA v4.4.2.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smu v14.0.1 re-used smu v14.0.0
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the od status info if it's not supported.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In order to support more test cases, support user
change reset_method at runtime.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gpu_od should be removed if it's an empty directory
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's not really an error since the devices don't support
the necessary hardware functionality.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3331
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The hs_rate and lp_rate may be used by the dsi host for timing
calculations. The tc358775 has a maximum bit rate of 1 Gbps/lane,
tc358765 has maximurate of 800 Mbps per lane.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-11-tony@atomide.com
|
|
The tc358775 bridge is pin compatible with earlier tc358765 according to
the tc358774xbg_datasheet_en_20190118.pdf documentation. Compared to the
tc358765, the tc358775 supports a STBY GPIO and higher data rates.
The tc358765 has a register bit for video event mode vs video pulse mode.
We must set it to video event mode for the LCD output to work, and on the
tc358775, this bit no longer exists.
Looks like the registers seem to match otherwise based on a quick glance
comparing the defines to the earlier Android kernel tc358765 driver.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-10-tony@atomide.com
|
|
Set pre_enable_prev_first to ensure the previous bridge is enabled
first.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Tested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-9-tony@atomide.com
|
|
Burst and low-power modes are supported both for tc358765 and tc358775.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Tested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-8-tony@atomide.com
|
|
The current code assumes the data-lanes property is configured on the
DSI host side instead of the bridge side, and assumes DSI host endpoint 1.
Let's standardize on what the other bridge drivers are doing and parse the
data-lanes property for the bridge. Only if data-lanes property is not found,
let's be nice and also check the DSI host for old dtb in use and warn.
And as Dmitry pointed out, the lanes for the host and the bridge may be
different because the lanes may be swapped on the host side.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-7-tony@atomide.com
|
|
The stby pin is optional. It is only needed for power-up and down
sequencing. It is not needed, if the power rails cannot by dynamically
enabled.
Because the GPIO is now optional, remove the error message.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-6-tony@atomide.com
|
|
The bridge always uses 24bpp internally. Therefore, for jeida-18
mapping we need to discard the lowest two bits for each channel and thus
starting with LV_[RGB]2. jeida-24 has the same mapping but uses four
lanes instead of three, with the forth pair transmitting the lowest two
bits of each channel. Thus, the mapping between jeida-18 and jeida-24
is actually the same, except that one channel is turned off (by
selecting the RGB666 format in VPCTRL).
While at it, remove the bogus comment about the hardware default because
the default is overwritten in any case.
Tested with a jeida-18 display (Evervision VGG644804).
Fixes: b26975593b17 ("display/drm/bridge: TC358775 DSI/LVDS driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-5-tony@atomide.com
|
|
The tc358765 is similar to tc358775. The tc358765 just an earlier version
of the hardware, and it's pin and register compatible with tc358775 for
most part.
From the binding point of view the only difference is that the tc358765
does not have stdby-gpios.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-4-tony@atomide.com
|
|
The device uses a clock lane, and 1 to 4 DSI data lanes. Let's add the
data-lanes property starting at 1 similar to what the other bridge
bindings are doing.
Let's also drop the data-lanes properties in the example for the DSI host
controller to avoid confusion. The configuration of the DSI host depends
on the controller used and is unrelated to the bridge binding.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-3-tony@atomide.com
|
|
For a normal operation, the stby GPIO is not needed.
The reset pin is required because once the PPI (PHY protocol interface)
is started, it can only be stopped by asserting the reset pin.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[tony@atomide.com: dropped regulator related changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-2-tony@atomide.com
|
|
The current definition yields a negative 32bits signed value which
result in a mask with is obviously incorrect. Replace it by using a
1ULL bit shift value to obtain a single set bit mask.
Fixes: 5dadda5e6a59 ("riscv: hwprobe: export Zvfh[min] ISA extensions")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240409143839.558784-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Stop relying on the dev_priv local variable in the DSI register
macros. Pass struct intel_display pointer to the macros. Move the MIPI
DSI MMIO base selection to a different level, passing it to _MMIO_MIPI()
and doing the addition there.
Start using the local display variable for all intel_de_* usage, and
opportunistically use it for other things than display registers as
well.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6dd52f3fce3527242479aadc276d05de74ceae5d.1713520813.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Stop using struct drm_* local variables and parameters where
possible. Drop the intel_ prefix from struct intel_encoder and
intel_connector local variable and parameter names. Drop useless
intermediate variables.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7aa8fbaa2ecbe2400255964d49aba40cfe0479c5.1713520813.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
All the BXT specific macros have BXT_ prefix, do the same for VLV for
consistency. This is helpful because the platform specific macros can
use the static MIPI MMIO base rather than dynamic.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7e101167c52746748dbff739bc9247a664ca2840.1713520813.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There are other unused registers, but this is also unusable and
inadequate. Remove.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/57afda02856a68f78fe4d30384d4f7b352b9a812.1713520813.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
NLMSG_DONE contains an error code, it has to be extracted.
Prior to this change all dumps will end in success,
and in case of failure the result is silently truncated.
Fixes: e4b48ed460d3 ("tools: ynl: add a completely generic client")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mtk-socinfo driver uses symbols 'soc_device_register' and
'soc_device_unregister' which are part of the bus driver for
System-on-Chip devices.
Select SOC_BUS to make sure that driver is built and the symbols are
available.
Fixes: 423a54da3c7e ("soc: mediatek: mtk-socinfo: Add driver for getting chip information")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/cc8f7f7da5bdccce514a320e0ae7468659cf7346.1707327680.git.daniel@makrotopia.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The thermal framework registers thermal zones as specified in DT and
including the "-thermal" suffix: append that to the driver specified
tzone_name to actually match the thermal zone name as registered by
the thermal API.
Fixes: 2bfbf82956e2 ("soc: mediatek: mtk-svs: Constify runtime-immutable members of svs_bank")
Link: https://lore.kernel.org/r/20240318113237.125802-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Change struct mdp4_plane allocation to use drmm_plane_alloc(). This
removes the need to perform any actions on plane destruction.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546181/
Link: https://lore.kernel.org/r/20230708010407.3871346-17-dmitry.baryshkov@linaro.org
|
|
Change struct mdp5_plane allocation to use drmm_plane_alloc(). This
removes the need to perform any actions on plane destruction.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546167/
Link: https://lore.kernel.org/r/20230708010407.3871346-11-dmitry.baryshkov@linaro.org
|
|
In dpu_core_irq_callback_handler() callback function pointer is compared to NULL,
but then callback function is unconditionally called by this pointer.
Fix this bug by adding conditional return.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c929ac60b3ed ("drm/msm/dpu: allow just single IRQ callback")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/588237/
Link: https://lore.kernel.org/r/20240408085523.12231-1-amishin@t-argos.ru
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Now as all subdrivers were converted to use common database of formats,
drop the get_format() callback and use mdp_get_format() directly.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590431/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-9-9e93226cbffd@linaro.org
|
|
Finally remove duplication between DPU and generic MDP code by merging
DPU format lists to the MDP format database.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/590435/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-8-9e93226cbffd@linaro.org
|
|
Instead of having a u8 or bool field unpack_align_msb, convert it to the
flag, this save space in the tables and allows us to handle all booleans
in the same way.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590427/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-7-9e93226cbffd@linaro.org
|
|
Instead of having a u8 or bool field unpack_tight, convert it to the
flag, this save space in the tables and allows us to handle all booleans
in the same way.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590428/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-6-9e93226cbffd@linaro.org
|
|
Structures dpu_format and mdp_format are largely the same structures.
In order to remove duplication between format databases, merge these two
stucture definitions into the global struct msm_format.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590434/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-5-9e93226cbffd@linaro.org
|
|
In preparation to merger of formats databases, pull format flag
definitions to mdp_format.h header, so that they are visibile to both
dpu and mdp drivers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/590425/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-4-9e93226cbffd@linaro.org
|
|
Using bitmap for the flags results in a clumsy syntax on test_bit,
replace it with unsigned long type and simple binary ops.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590422/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-3-9e93226cbffd@linaro.org
|
|
MDP4 and MDP5 drivers enumerate supported formats each time the plane is
created. In preparation to merger of MDP DPU format databases, define
precise formats list, so that changes to the database do not cause the
driver to add unsupported format to the list.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590421/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-2-9e93226cbffd@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The dev_tracker is added to ax25_cb in ax25_bind(). When the
ax25 device is detaching, the dev_tracker of ax25_cb should be
deallocated in ax25_kill_by_device() instead of the dev_tracker
of ax25_dev. The log reported by ref_tracker is shown below:
[ 80.884935] ref_tracker: reference already released.
[ 80.885150] ref_tracker: allocated in:
[ 80.885349] ax25_dev_device_up+0x105/0x540
[ 80.885730] ax25_device_event+0xa4/0x420
[ 80.885730] notifier_call_chain+0xc9/0x1e0
[ 80.885730] __dev_notify_flags+0x138/0x280
[ 80.885730] dev_change_flags+0xd7/0x180
[ 80.885730] dev_ifsioc+0x6a9/0xa30
[ 80.885730] dev_ioctl+0x4d8/0xd90
[ 80.885730] sock_do_ioctl+0x1c2/0x2d0
[ 80.885730] sock_ioctl+0x38b/0x4f0
[ 80.885730] __se_sys_ioctl+0xad/0xf0
[ 80.885730] do_syscall_64+0xc4/0x1b0
[ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 80.885730] ref_tracker: freed in:
[ 80.885730] ax25_device_event+0x272/0x420
[ 80.885730] notifier_call_chain+0xc9/0x1e0
[ 80.885730] dev_close_many+0x272/0x370
[ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180
[ 80.885730] unregister_netdev+0xcf/0x120
[ 80.885730] sixpack_close+0x11f/0x1b0
[ 80.885730] tty_ldisc_kill+0xcb/0x190
[ 80.885730] tty_ldisc_hangup+0x338/0x3d0
[ 80.885730] __tty_hangup+0x504/0x740
[ 80.885730] tty_release+0x46e/0xd80
[ 80.885730] __fput+0x37f/0x770
[ 80.885730] __x64_sys_close+0x7b/0xb0
[ 80.885730] do_syscall_64+0xc4/0x1b0
[ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 80.893739] ------------[ cut here ]------------
[ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0
[ 80.894297] Modules linked in:
[ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11
[ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4
[ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0
[ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9
[ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286
[ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000
[ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518
[ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a
[ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4
[ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518
[ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000
[ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0
...
[ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at
[ 80.935774] ax25_bind+0x424/0x4e0
[ 80.935774] __sys_bind+0x1d9/0x270
[ 80.935774] __x64_sys_bind+0x75/0x80
[ 80.935774] do_syscall_64+0xc4/0x1b0
[ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f
Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb
in order to mitigate the bug.
Fixes: feef318c855a ("ax25: fix UAF bugs of net_device caused by rebinding operation")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20240419020456.29826-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the eeprom is not accessible, an nvmem device will be registered, the
read will fail, and the device will be torn down. If another driver
accesses the nvmem device after the teardown, it will reference
invalid memory.
Move the failure point before registering the nvmem device.
Signed-off-by: Daniel Okazaki <dtokazaki@google.com>
Fixes: b20eb4c1f026 ("eeprom: at24: drop unnecessary label")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240422174337.2487142-1-dtokazaki@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Fix the error return in netfs_perform_write() acting in writethrough-mode
to return any cached error in the case that netfs_end_writethrough()
returns 0.
This can affect the use of O_SYNC/O_DSYNC/RWF_SYNC/RWF_DSYNC in 9p and afs.
Fixes: 41d8e7673a77 ("netfs: Implement a write-through caching option")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/6736.1713343639@warthog.procyon.org.uk
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
To ensure that ioctl()s can't be used to circumvent write restrictions.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that ntfs3 is mounted read-only when it is used to provide the
legacy ntfs driver.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add the newly added LVDS controller for the SAM9X7 SoC to the existing
MAINTAINERS entry.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240421011050.43265-4-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-4-dharma.b@microchip.com
|
|
Add a new LVDS controller driver for sam9x7 which does the following:
- Prepares and enables the LVDS Peripheral clock
- Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
to the global bridge list.
- Identifies its output endpoint as panel and adds it to the encoder
display pipeline
- Enables the LVDS serializer
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Acked-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240421011050.43265-3-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-3-dharma.b@microchip.com
|
|
Add the 'sam9x75-lvds' compatible binding, which describes the Low Voltage
Differential Signaling (LVDS) Controller found on some Microchip's sam9x7
series System-on-Chip (SoC) devices. This binding will be used to define
the properties and configuration for the LVDS Controller in DT.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240421011050.43265-2-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-2-dharma.b@microchip.com
|
|
Maíra needs a backmerge to apply v3d patches, and Danilo for some
nouveau patches.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
