| Age | Commit message (Collapse) | Author |
|---|
|
The FDMA handler is responsible for scheduling a NAPI poll, which will
eventually fetch RX packets from the FDMA queue. Currently, the FDMA
handler is run in a threaded context. For some reason, this kills
performance. Admittedly, I did not do a thorough investigation to see
exactly what causes the issue, however, I noticed that in the other
driver utilizing the same FDMA engine, we run the FDMA handler in hard
IRQ context.
Fix this performance issue, by running the FDMA handler in hard IRQ
context, not deferring any work to a thread.
Prior to this change, the RX UDP performance was:
Interval Transfer Bitrate Jitter
0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms
After this change, the rx UDP performance is:
Interval Transfer Bitrate Jitter
0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms
Fixes: 10615907e9b5 ("net: sparx5: switchdev: adding frame DMA functionality")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We are mixing the use of spin_lock() and spin_lock_irqsave() functions
in the PTP handler of lan969x. Fix this by correctly using the _irqsave
variants.
Fixes: 24fe83541755 ("net: lan969x: add PTP handler function")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
[1]: https://lore.kernel.org/netdev/20241024-sparx5-lan969x-switch-driver-2-v2-10-a0b5fae88a0f@microchip.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Depmod reports a cyclic dependency between modules sparx5-switch.ko and
lan969x-switch.ko:
depmod: ERROR: Cycle detected: lan969x_switch -> sparx5_switch -> lan969x_switch
depmod: ERROR: Found 2 modules in dependency cycles!
make[2]: *** [scripts/Makefile.modinst:132: depmod] Error 1
make: *** [Makefile:224: __sub-make] Error 2
This makes sense, as they both require symbols from each other.
Fix this by compiling lan969x support into the sparx5-switch.ko module.
In order to do this, in a sensible way, we move the lan969x/ dir into
the sparx5/ dir and do some code cleanup of code that is no longer
required.
After this patch, depmod will no longer complain, as lan969x support is
compiled into the sparx5-swicth.ko module, and can no longer be compiled
as a standalone module.
Fixes: 98a01119608d ("net: sparx5: add compatible string for lan969x")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-21-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-20-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-19-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-18-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-17-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-16-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-15-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-14-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-13-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-12-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-11-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-10-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-9-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-8-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-7-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-6-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-5-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-4-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-3-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-2-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-1-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Number of DAIs in the codec is not really a binding constant, because it
could grow, e.g. when we implement missing features.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241209094442.38900-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Number of DAIs in the codec is not really a binding, because it could
grow, e.g. when we implement missing features. Add the define to the
driver, which will replace the one in the binding header.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241209094442.38900-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add some new match table entries on Arrowlake for some coming cs42l43
laptops.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As there are many combinations these follow a naming scheme to make
the content of link structures clearer:
cs35l56_<controller link>_<l or r><unique instance id>_adr
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add rt713_vb on SoundWire link 2 and rt1320 on SoundWire link 1 and 3
configuration support.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add rt713_vb on SoundWire link 2 and rt1320 on SoundWire link 1 and 3
configuration support.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add rt712_vb on SDW link 2 and 1 rt1320 on SDW link 1 configuration
support.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add debug message when SOC_SDW_CODEC_MIC is enabled (which informs the
machine driver to not bind in the cs42l43 microphone DAI link).
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In addition to changing the DMI match to examine the product name rather
than the SKU, this adds the quirk to inform the machine driver to not
bind in the cs42l43 microphone DAI link.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The log shows the number for different type of DAIs. Add "DAI link
numbers:" to make the log be more explicit.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ctx->ignore_internal_dmic is set when there is a dedicated SoundWire
DMIC is in the system. In other words, ignoring internal DMIC is
expected, not an error.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mach_params->dmic_num will be used to set the cfg-mics value of
card->components string which should be the dmic channels. However
dmic_num is dmic link number and could be set due to the SOC_SDW_PCH_DMIC
quirk. Set mach_params->dmic_num to the default value if the dmic link
is created due to the SOC_SDW_PCH_DMIC quirk.
Fixes: 7db9f6361170 ("ASoC: Intel: sof_sdw: overwrite mach_params->dmic_num")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because DT check when compiling become very strict in these days,
we need to add reg = <x> if it has multi port/endpoint, otherwise
it will get error or warning. But it was not so strict and/or
mandatry before.
Current code is counting "endpoint" to get DAI ID, but it should count
"port" instead, otherwise strange ID will be used for DAI if it was multi
connected case (A). There is no issue if it was not multi connected (B).
One note is that this code will be used if neither port/endpoint doesn't
have reg = <x> property on DT.
case (A)
/* This should be handled as DAI-0 */
port@0 {
endpoint@0 { } /* It will be DAI-0 by endpoint count */
endpoint@1 { } /* It will be DAI-1 by endpoint count */
};
/* This should be handled as DAI-1 */
port@1 {
endpoint { } /* It will be DAI-2 by endpoint count */
};
case (B)
/* both endpoint cound and port count are same */
port@0 {
endpoint { ... }
};
port@1 {
endpoint { ... }
};
It will be issue if Audio-Graph-Card is used with Multi Connection.
No issue will be happen with Audio-Graph-Card2 / Simple-Card.
This patch uses for_each_of_graph_port() instead of
for_each_endpoint_of_node(), and thus, we can use "break" to quit
from loop. Because for_each_of_graph_port() uses __free(device_node)
inside.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o71tfrdz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because DT check when compiling become very strict in these days,
we need to add reg = <x> if it has multi port/endpoint, otherwise
it will get error or warning. But it was not so strict and/or
mandatry before.
Current code uses reg number as DAI ID, but it will use "endpoint"
reg first and use "port" reg 2nd. But it should use port number as 1st (A)
if it was used for multi connected case. There is no priority for
port/endpoint if it was not multi connected (B).
case (A)
port {
/*
* "port" and "endpoint" are using different reg number.
* It should use <x> as DAI ID, not <y> not <z>
*/
reg = <x>;
endpoint@y { reg = <y>; ... };
endpoint@z { reg = <z>; ... };
};
case (B)
port {
/*
* Both port/endpoint are using same reg numer <x>.
*/
reg = <x>;
endpoint { reg = <x>; ... };
};
It will be issue if Audio-Graph-Card is used with Multi Connection.
No issue will be happen with Audio-Graph-Card2 / Simple-Card.
This patch swtich port/endpoint priority.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plm9fre3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
simple-card-utils handles many type of device_node, thus need to
use of_node_put() in many place. Let's use __free(device_node)
and avoid it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r06pfre8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Platforms like i.MX93/91 only have one audio PLL. Some sample rates are
not supported. If the PLL source is used for 8kHz series rates, then
11kHz series rates can't be supported. Use fsl_asoc_constrain_rates()
to constrain rates according to PLL sources.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20241126115440.3929061-5-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Platforms like i.MX93/91 only have one audio PLL. Some sample rates are
not supported. If the PLL source is used for 8kHz series rates, then
11kHz series rates can't be supported. Use fsl_asoc_constrain_rates()
to constrain rates according to PLL sources. This constraint is merely
applicable to playback cases on SPDIF only platforms.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20241126115440.3929061-4-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
fsl_asoc_constrain_rates() is a common function to constrain rates.
Let's switch to this function.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20241126115440.3929061-3-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Platforms like i.MX93/91 only have one audio PLL. Some sample rates are
not supported. Add common function to constrain rates according to
different clock sources.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20241126115440.3929061-2-chancel.liu@nxp.com
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
STIG mode is enabled by default for less than 8 bytes data read/write.
STIG mode doesn't work with Altera SocFPGA platform due hardware
limitation.
Add a quirks to disable STIG mode for Altera SoCFPGA platform.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Link: https://patch.msgid.link/20241204063338.296959-1-niravkumar.l.rabara@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The early bail out that caused an out-of-bounds write was removed with
commit 5c018e378f91 ("spi: spi-rockchip: Fix out of bounds array
access")
Unfortunately that caused the PM runtime count to be unbalanced and
underflowed on the first call. To fix that reintroduce a no-op check
by reading the register directly.
Cc: stable@vger.kernel.org
Fixes: 5c018e378f91 ("spi: spi-rockchip: Fix out of bounds array access")
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/1f2b3af4-2b7a-4ac8-ab95-c80120ebf44c@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A aspeed_spi_start_user() is not balanced by a corresponding
aspeed_spi_stop_user().
Add the missing call.
Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/4052aa2f9a9ea342fa6af83fa991b55ce5d5819e.1732051814.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
AXP717 datasheet says that regulator ramp delay is 15.625 us/step,
which is 10mV in our case.
Add a AXP_DESC_RANGES_DELAY macro and update AXP_DESC_RANGES macro to
expand to AXP_DESC_RANGES_DELAY with ramp_delay = 0
For DCDC4, steps is 100mv
Add a AXP_DESC_DELAY macro and update AXP_DESC macro to
expand to AXP_DESC_DELAY with ramp_delay = 0
This patch fix crashes when using CPU DVFS.
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Tested-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717")
Link: https://patch.msgid.link/20241208124308.5630-1-simons.philippe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add description of the PMU node for the WCN6750B module.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241209103455.9675-2-quic_janathot@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This has fixes for several boards which help my testing a lot.
|
|
Vincent and Dietmar noted that while
commit fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE") fixes
the entity runnable stats, it does not adjust the cfs_rq runnable stats,
which are based off of h_nr_running.
Track h_nr_delayed such that we can discount those and adjust the
signal.
Fixes: fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE")
Closes: https://lore.kernel.org/lkml/a9a45193-d0c6-4ba2-a822-464ad30b550e@arm.com/
Closes: https://lore.kernel.org/lkml/CAKfTPtCNUvWE_GX5LyvTF-WdxUT=ZgvZZv-4t=eWntg5uOFqiQ@mail.gmail.com/
[ Fixes checkpatch warnings and rebased ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-3-vincent.guittot@linaro.org
|
