| Age | Commit message (Collapse) | Author |
|---|
|
There is a scenario where a large number of discard commands are issued
when the iscsi initiator connects to the target and then performs a session
rescan operation. There is a time window, most of the commands are in UNMAP
mode, and some discard commands become WRITE SAME with UNMAP.
The discard mode has been negotiated during the SCSI probe. If the mode is
temporarily changed from UNMAP to WRITE SAME with UNMAP, an I/O ERROR may
occur because the target may not implement WRITE SAME with UNMAP. Keep the
discard mode stable to fix this issue.
Signed-off-by: Li Feng <fengli@smartx.com>
Link: https://lore.kernel.org/r/20240718080751.313102-2-fengli@smartx.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
GVE driver wrongly relies on netif_carrier_ok() to check the
interface administrative state when resources are being
allocated/deallocated for queue(s). netif_carrier_ok() needs
to be replaced with netif_running() for all such cases.
Administrative state is the result of "ip link set dev <dev>
up/down". It reflects whether the administrator wants to use
the device for traffic and the corresponding resources have
been allocated.
Fixes: 5f08cd3d6423 ("gve: Alloc before freeing when adjusting queues")
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240801205619.987396-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DEVID register contains two pieces of information: the device ID in
the upper nibble, and the silicon revision number in the lower nibble.
The driver should work fine with any silicon revision, so let's mask
that out in the device ID check.
Fixes: 20e6d190ffe1 ("net: pse-pd: Add TI TPS23881 PSE controller driver")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240731154152.4020668-1-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in
reuseport_add_sock(). [0]
The repro first creates a listener with SO_REUSEPORT. Then, it creates
another listener on the same port and concurrently closes the first
listener.
The second listen() calls reuseport_add_sock() with the first listener as
sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently,
but the close() does clear it by reuseport_detach_sock().
The problem is SCTP does not properly synchronise reuseport_alloc(),
reuseport_add_sock(), and reuseport_detach_sock().
The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must
provide synchronisation for sockets that are classified into the same
reuseport group.
Otherwise, such sockets form multiple identical reuseport groups, and
all groups except one would be silently dead.
1. Two sockets call listen() concurrently
2. No socket in the same group found in sctp_ep_hashtable[]
3. Two sockets call reuseport_alloc() and form two reuseport groups
4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives
incoming packets
Also, the reported null-ptr-deref could occur.
TCP/UDP guarantees that would not happen by holding the hash bucket lock.
Let's apply the locking strategy to __sctp_hash_endpoint() and
__sctp_unhash_endpoint().
[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350
Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14
RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012
RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385
R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__sctp_hash_endpoint net/sctp/input.c:762 [inline]
sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790
sctp_listen_start net/sctp/socket.c:8570 [inline]
sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625
__sys_listen_socket net/socket.c:1883 [inline]
__sys_listen+0x1b7/0x230 net/socket.c:1894
__do_sys_listen net/socket.c:1902 [inline]
__se_sys_listen net/socket.c:1900 [inline]
__x64_sys_listen+0x5a/0x70 net/socket.c:1900
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f24e46039b9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9
RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004
RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0
R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c
R13: 00007f24e465a5dc R14: 0020000000000001 R15: 00007ffcced5f7d8
</TASK>
Modules linked in:
Fixes: 6ba845740267 ("sctp: process sk_reuseport in sctp_get_port_local")
Reported-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e6979a5d2f10ecb700e4
Tested-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20240731234624.94055-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The old SysKonnect NIc's are not used or actively maintained anymore.
My sky2 NIC's are all in box in back corner of attic.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240801162930.212299-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull io_uring fixes from Jens Axboe:
"Two minor tweaks for the NAPI handling, both from Olivier:
- Kill two unused list definitions
- Ensure that multishot NAPI doesn't age away"
* tag 'io_uring-6.11-20240802' of git://git.kernel.dk/linux:
io_uring: remove unused local list heads in NAPI functions
io_uring: keep multishot request NAPI timeout current
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a few issues related to the MSI IRQs management in the
int340x thermal driver, fix a thermal core issue that may lead to
missing trip point crossing events and update the thermal core
documentation.
Specifics:
- Fix MSI error path cleanup in int340x, allow it to work with a
subset of thermal MSI IRQs if some of them are not working and make
it free all MSI IRQs on module exit (Srinivas Pandruvada)
- Fix a thermal core issue that may lead to missing trip point
crossing events in some cases when thermal_zone_set_trips() is used
and update the thermal core documentation (Rafael Wysocki)"
* tag 'thermal-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Update thermal zone registration documentation
thermal: trip: Avoid skipping trips in thermal_zone_set_trips()
thermal: intel: int340x: Free MSI IRQ vectors on module exit
thermal: intel: int340x: Allow limited thermal MSI support
thermal: intel: int340x: Fix kernel warning during MSI cleanup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Expand the speculative SSBS errata workaround to more CPUs
- Ensure jump label changes are visible to all CPUs with a
kick_all_cpus_sync() (and also enable jump label batching as part of
the fix)
- The shadow call stack sanitiser is currently incompatible with Rust,
make CONFIG_RUST conditional on !CONFIG_SHADOW_CALL_STACK
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: jump_label: Ensure patched jump_labels are visible to all CPUs
rust: SHADOW_CALL_STACK is incompatible with Rust
arm64: errata: Expand speculative SSBS workaround (again)
arm64: cputype: Add Cortex-A725 definitions
arm64: cputype: Add Cortex-X1C definitions
|
|
[BUG]
There is a bug report that using the latest trunk GCC 15, btrfs would cause
unterminated-string-initialization warning:
linux-6.6/fs/btrfs/print-tree.c:29:49: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
29 | { BTRFS_BLOCK_GROUP_TREE_OBJECTID, "BLOCK_GROUP_TREE" },
|
^~~~~~~~~~~~~~~~~~
[CAUSE]
To print tree names we have an array of root_name_map structure, which
uses "char name[16];" to store the name string of a tree.
But the following trees have names exactly at 16 chars length:
- "BLOCK_GROUP_TREE"
- "RAID_STRIPE_TREE"
This means we will have no space for the terminating '\0', and can lead
to unexpected access when printing the name.
[FIX]
Instead of "char name[16];" use "const char *" instead.
Since the name strings are all read-only data, and are all NULL
terminated by default, there is not much need to bother the length at
all.
Reported-by: Sam James <sam@gentoo.org>
Reported-by: Alejandro Colomar <alx@kernel.org>
Fixes: edde81f1abf29 ("btrfs: add raid stripe tree pretty printer")
Fixes: 9c54e80ddc6bd ("btrfs: add code to support the block group root")
CC: stable@vger.kernel.org # 6.1+
Suggested-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we do a direct IO sync write, at btrfs_sync_file(), and we need to skip
inode logging or we get an error starting a transaction or an error when
flushing delalloc, we end up unlocking the inode when we shouldn't under
the 'out_release_extents' label, and then unlock it again at
btrfs_direct_write().
Fix that by checking if we have to skip inode unlocking under that label.
Reported-by: syzbot+7dbbb74af6291b5a5a8b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000dfd631061eaeb4bc@google.com/
Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull ceph fix from Ilya Dryomov:
"A fix for a potential hang in the MDS when cap revocation races with
the client releasing the caps in question, marked for stable"
* tag 'ceph-for-6.11-rc2' of https://github.com/ceph/ceph-client:
ceph: force sending a cap update msg back to MDS for revoke op
|
|
Pull kvm updates from Paolo Bonzini:
"The bulk of the changes here is a largish change to guest_memfd,
delaying the clearing and encryption of guest-private pages until they
are actually added to guest page tables. This started as "let's make
it impossible to misuse the API" for SEV-SNP; but then it ballooned a
bit.
The new logic is generally simpler and more ready for hugepage support
in guest_memfd.
Summary:
- fix latent bug in how usage of large pages is determined for
confidential VMs
- fix "underline too short" in docs
- eliminate log spam from limited APIC timer periods
- disallow pre-faulting of memory before SEV-SNP VMs are initialized
- delay clearing and encrypting private memory until it is added to
guest page tables
- this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can
now be moved in the common kvm_gmem_populate() function
- fix compilation error that the RISC-V merge introduced in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
KVM: riscv: selftests: Fix compile error
KVM: guest_memfd: abstract how prepared folios are recorded
KVM: guest_memfd: let kvm_gmem_populate() operate only on private gfns
KVM: extend kvm_range_has_memory_attributes() to check subset of attributes
KVM: cleanup and add shortcuts to kvm_range_has_memory_attributes()
KVM: guest_memfd: move check for already-populated page to common code
KVM: remove kvm_arch_gmem_prepare_needed()
KVM: guest_memfd: make kvm_gmem_prepare_folio() operate on a single struct kvm
KVM: guest_memfd: delay kvm_gmem_prepare_folio() until the memory is passed to the guest
KVM: guest_memfd: return locked folio from __kvm_gmem_get_pfn
KVM: rename CONFIG_HAVE_KVM_GMEM_* to CONFIG_HAVE_KVM_ARCH_GMEM_*
KVM: guest_memfd: do not go through struct page
KVM: guest_memfd: delay folio_mark_uptodate() until after successful preparation
KVM: guest_memfd: return folio from __kvm_gmem_get_pfn()
KVM: x86: disallow pre-fault for SNP VMs before initialization
KVM: Documentation: Fix title underline too short warning
KVM: x86: Eliminate log spam from limited APIC timer periods
|
|
* fix latent bug in how usage of large pages is determined for
confidential VMs
* fix "underline too short" in docs
* eliminate log spam from limited APIC timer periods
* disallow pre-faulting of memory before SEV-SNP VMs are initialized
* delay clearing and encrypting private memory until it is added to
guest page tables
* this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages
can now be moved in the common kvm_gmem_populate() function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid dropping some of the internal pseudo-extensions, which
breaks *envcfg dependency parsing
- The kernel entry address is now aligned in purgatory, which avoids a
misaligned load that can lead to crash on systems that don't support
misaligned accesses early in boot
- The FW_SFENCE_VMA_RECEIVED perf event was duplicated in a handful of
perf JSON configurations, one of them been updated to
FW_SFENCE_VMA_ASID_SENT
- The starfive cache driver is now restricted to 64-bit systems, as it
isn't 32-bit clean
- A fix for to avoid aliasing legacy-mode perf counters with software
perf counters
- VM_FAULT_SIGSEGV is now handled in the page fault code
- A fix for stalls during CPU hotplug due to IPIs being disabled
- A fix for memblock bounds checking. This manifests as a crash on
systems with discontinuous memory maps that have regions that don't
fit in the linear map
* tag 'riscv-for-linus-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix linear mapping checks for non-contiguous memory regions
RISC-V: Enable the IPI before workqueue_online_cpu()
riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()
perf: riscv: Fix selecting counters in legacy mode
cache: StarFive: Require a 64-bit system
perf arch events: Fix duplicate RISC-V SBI firmware event name
riscv/purgatory: align riscv_kernel_entry
riscv: cpufeature: Do not drop Linux-internal extensions
|
|
into HEAD
KVM/riscv fixes for 6.11, take #1
- Fix compile error in get-reg-list selftests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- remove unused empty CPU alternatives header file
- fix recently and erroneously removed exception handling when loading
an invalid floating point register
- ptdump fixes to reflect the recent changes due to the uncoupling of
physical vs virtual kernel address spaces
- changes to avoid the unnecessary splitting of large pages in kernel
mappings
- add the missing MODULE_DESCRIPTION for the CIO modules
* tag 's390-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Keep inittext section writable
s390/vmlinux.lds.S: Move ro_after_init section behind rodata section
s390/mm: Get rid of RELOC_HIDE()
s390/mm/ptdump: Improve sorting of markers
s390/mm/ptdump: Add support for relocated lowcore mapping
s390/mm/ptdump: Fix handling of identity mapping area
s390/cio: Add missing MODULE_DESCRIPTION() macros
s390/alternatives: Remove unused empty header file
s390/fpu: Re-add exception handling in load_fpu_state()
|
|
The current "nretries > 1 || nretries >= max_retries" check in
cs_watchdog_read() will always evaluate to true, and thus pr_warn(), if
nretries is greater than 1. The intent is instead to never warn on the
first try, but otherwise warn if the successful retry was the last retry.
Therefore, change that "||" to "&&".
Fixes: db3a34e17433 ("clocksource: Retry clock read if long delays detected")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240802154618.4149953-2-paulmck@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be on
alpha"
* tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
alpha: fix ioread64be()/iowrite64be() helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A small collection of fixes:
- Revert of FireWire changes that caused a long-time regression
- Another long-time regression fix for AMD HDMI
- MIDI2 UMP fixes
- HD-audio Conexant codec fixes and a quirk"
* tag 'sound-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Conditionally use snooping for AMD HDMI
ALSA: usb-audio: Correct surround channels in UAC1 channel map
ALSA: seq: ump: Explicitly reset RPN with Null RPN
ALSA: seq: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
ALSA: seq: ump: Use the common RPN/bank conversion context
ALSA: ump: Explicitly reset RPN with Null RPN
ALSA: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
Revert "ALSA: firewire-lib: operate for period elapse event in process context"
Revert "ALSA: firewire-lib: obsolete workqueue for period update"
ALSA: hda/realtek: Add quirk for Acer Aspire E5-574G
ALSA: seq: ump: Optimize conversions from SysEx to UMP
ALSA: hda/conexant: Mute speakers at suspend / shutdown
ALSA: hda/generic: Add a helper to mute speakers at suspend/shutdown
ALSA: hda: conexant: Fix headset auto detect fail in the polling mode
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes. This is a bit larger than usual but doesn't seem
too crazy.
Most of it is vmwgfx changes that fix a bunch of issues with wayland
userspaces with dma-buf/external buffers and modesetting fixes.
Otherwise it's kinda spread out, v3d fixes some new ioctls, nouveau
has regression revert and fixes, amdgpu, i915 and ast have some small
fixes, and some core fixes spread about.
client:
- fix error code
atomic:
- allow damage clips with async flips
- allow explicit sync with async flips
kselftests:
- fix dmabuf-heaps test
panic:
- fix schedule_work in panic paths
panel:
- fix OrangePi Neo orientation
gpuvm:
- fix missing dependency
amdgpu:
- SMU 14.x update
- Fix contiguous VRAM handling for IB parsing
- GFX 12 fix
- Regression fix for old APUs
i915:
- Static analysis fix for int overflow
- Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12
nouveau:
- revert busy wait change that caused a resume regression
- fix buffer placement fault on dynamic pm s/r
- fix refcount underflow
ast:
- fix black screen on resume
- wake during connector status detect
v3d:
- fix issues with perf/timestamp ioctls
vmwgfx:
- fix deadlock in dma-buf fence polling
- fix screen surface refcounting
- fix dumb buffer handling
- fix support for external buffers
- fix overlay with screen targets
- trigger modeset on screen moves"
* tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
Revert "nouveau: rip out busy fence waits"
nouveau: set placement to original placement on uvmm validate.
drm/atomic: Allow userspace to use damage clips with async flips
drm/atomic: Allow userspace to use explicit sync with atomic async flips
drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()
drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro
drm/ast: astdp: Wake up during connector status detection
i915/perf: Remove code to update PWR_CLK_STATE for gen12
kselftests: dmabuf-heaps: Ensure the driver name is null-terminated
drm/client: Fix error code in drm_client_buffer_vmap_local()
drm/amdgpu: Fix APU handling in amdgpu_pm_load_smu_firmware()
drm/amdgpu: increase mes log buffer size for gfx12
drm/amdgpu: fix contiguous handling for IB parsing v2
drm/amdgpu/pm: support gpu_metrics sysfs interface for smu v14.0.2/3
drm/vmwgfx: Trigger a modeset when the screen moves
drm/vmwgfx: Fix overlay when using Screen Targets
drm/vmwgfx: Add basic support for external buffers
drm/vmwgfx: Fix handling of dumb buffers
drm/vmwgfx: Make sure the screen surface is ref counted
drm/vmwgfx: Fix a deadlock in dma buf fence polling
...
|
|
To 2.50
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
NetApp server requires the file to be open with FILE_READ_EA access in
order to support FSCTL_GET_REPARSE_POINT, otherwise it will return
STATUS_INVALID_DEVICE_REQUEST. It doesn't make any sense because
there's no requirement for FILE_READ_EA bit to be set nor
STATUS_INVALID_DEVICE_REQUEST being used for something other than
"unsupported reparse points" in MS-FSA.
To fix it and improve compatibility, set FILE_READ_EA & SYNCHRONIZE
bits to match what Windows client currently does.
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For debugging an umount failure in xfstests generic/043 generic/044 in some
configurations, we needed more information on the shutdown ioctl which
was suspected of being related to the cause, so tracepoints are added
in this patch e.g.
"trace-cmd record -e smb3_shutdown_enter -e smb3_shutdown_done -e smb3_shutdown_err"
Sample output:
godown-47084 [011] ..... 3313.756965: smb3_shutdown_enter: flags=0x1 tid=0x733b3e75
godown-47084 [011] ..... 3313.756968: smb3_shutdown_done: flags=0x1 tid=0x733b3e75
Tested-by: Anthony Nandaa (Microsoft) <profnandaa@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove struct cifs_aio_ctx and its associated alloc/release functions as it
is no longer used, the functions being taken over by netfslib.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
As per MS-FSA 2.1.5.10.14, support for FSCTL_GET_REPARSE_POINT is
optional and if the server doesn't support it,
STATUS_INVALID_DEVICE_REQUEST must be returned for the operation.
If we find files with reparse points and we can't read them due to
lack of client or server support, just ignore it and then treat them
as regular files or junctions.
Fixes: 5f71ebc41294 ("smb: client: parse reparse point flag in create response")
Reported-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Add missing power-domains property to the device tree bindings for
the Rockchip Designware AHCI adapter (from Heiko)
* tag 'ata-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: rockchip-dwc-ahci: add missing power-domains
|
|
Pull vfs fix from Al Viro:
"do_dup2() out-of-bounds array speculation fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
protect the fetch of ->fd[fd] in do_dup2() from mispredictions
|
|
Although the Arm architecture permits concurrent modification and
execution of NOP and branch instructions, it still requires some
synchronisation to ensure that other CPUs consistently execute the newly
written instruction:
> When the modified instructions are observable, each PE that is
> executing the modified instructions must execute an ISB or perform a
> context synchronizing event to ensure execution of the modified
> instructions
Prior to commit f6cc0c501649 ("arm64: Avoid calling stop_machine() when
patching jump labels"), the arm64 jump_label patching machinery
performed synchronisation using stop_machine() after each modification,
however this was problematic when flipping static keys from atomic
contexts (namely, the arm_arch_timer CPU hotplug startup notifier) and
so we switched to the _nosync() patching routines to avoid "scheduling
while atomic" BUG()s during boot.
In hindsight, the analysis of the issue in f6cc0c501649 isn't quite
right: it cites the use of IPIs in the default patching routines as the
cause of the lockup, whereas stop_machine() does not rely on IPIs and
the I-cache invalidation is performed using __flush_icache_range(),
which elides the call to kick_all_cpus_sync(). In fact, the blocking
wait for other CPUs is what triggers the BUG() and the problem remains
even after f6cc0c501649, for example because we could block on the
jump_label_mutex. Eventually, the arm_arch_timer driver was fixed to
avoid the static key entirely in commit a862fc2254bd
("clocksource/arm_arch_timer: Remove use of workaround static key").
This all leaves the jump_label patching code in a funny situation on
arm64 as we do not synchronise with other CPUs to reduce the likelihood
of a bug which no longer exists. Consequently, toggling a static key on
one CPU cannot be assumed to take effect on other CPUs, leading to
potential issues, for example with missing preempt notifiers.
Rather than revert f6cc0c501649 and go back to stop_machine() for each
patch site, implement arch_jump_label_transform_apply() and kick all
the other CPUs with an IPI at the end of patching.
Cc: Alexander Potapenko <glider@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Fixes: f6cc0c501649 ("arm64: Avoid calling stop_machine() when patching jump labels")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240731133601.3073-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The __NR_newfstat and __NR_newfstatat macros accidentally got renamed
in the conversion to the syscall.tbl format, dropping the 'new' portion
of the name.
In an unrelated change, the two syscalls are no longer architecture
specific but are once more defined on all 64-bit architectures, so the
'newstat' ABI keyword can be dropped from the table as a simplification.
Fixes: Fixes: 4fe53bf2ba0a ("syscalls: add generic scripts/syscall.tbl")
Closes: https://lore.kernel.org/lkml/838053e0-b186-4e9f-9668-9a3384a71f23@app.fastmail.com/T/#t
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a34 ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df4a ("uprobe: Wire up uretprobe system call")
Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The microphone/speaker privacy shutter ALSA control handlers need to
call pm_runtime_resume, since the hardware needs to be powered up to
check the hardware state of the shutter. The IRQ handler for the
shutters also needs to notify the ALSA control to inform user-space
the shutters updated. However this leads to a mutex inversion,
between the sdw_dev_lock and the controls_rwsem.
To avoid this mutex inversion cache the kctl pointers before the IRQ
handler, which avoids the need to lookup the control and take the
controls_rwsem.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802105734.2309788-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No longer any need to hard code the addition of the name prefix, use the
new helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802105734.2309788-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new helper functions snd_soc_component_get_kcontrol() and
snd_soc_component_get_kcontrol_locked() that returns a kcontrol
by name, but will factor in the components name_prefix, to handle
situations where multiple components are present with the same
controls.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802105734.2309788-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802105734.2309788-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On Intel Emerald Rapids machines, we ship the Energy Performance Preference
(EPP) default for balance_performance as 128. However, during an internal
investigation together with Intel, we have determined that 32 is a more
suitable value. This leads to significant improvements in both performance
and energy:
POV-Ray: 32% faster | 12% less energy
OpenSSL: 12% faster | energy within 1%
Build Linux Kernel: 29% faster | 18% less energy
Therefore, we should move the default EPP for balance_performance to 32.
This is in line with what has already been done for Sapphire Rapids.
Signed-off-by: Pedro Henrique Kopper <pedro.kopper@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/Zqu6zjVMoiXwROBI@capivara
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The thermal sysfs API document is outdated. One of the problems with
it is that is still documents thermal_zone_device_register() which
does not exit any more and it does not reflect the current thermal
zone operations definition.
Replace the thermal_zone_device_register() description in it with
a thermal_zone_device_register_with_trips() description, including
an update of the thermal zone operations list.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2767845.mvXUDI8C0e@rjwysocki.net
|
|
The test here creates an sg table, but never maps it, when
we get to drm_gem_shmem_free, the helper tries to unmap and this
causes warnings on some platforms and debug kernels.
This also sets a 64-bit dma mask, as I see an swiotlb warning if I
stick with the default 32-bit one.
Fixes: 93032ae634d4 ("drm/test: add a test suite for GEM objects backed by shmem")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Marco Pagani <marpagan@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715083551.777807-1-airlied@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is
assigned to modeset->mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes: cf13909aee05 ("drm/fb-helper: Move out modeset config code")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802044736.1570345-1-make24@iscas.ac.cn
|
|
This reverts commit d45bb9c5f7a6f7b6e47939856b28cb1da0cdc119.
Just got a report that this causes some suspend/resume issues,
so back it out and I'll investigate it later.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple drm_panic fixes, several v3d fixes to increase the new timestamp API
safety, several fixes for vmwgfx for various modesetting issues, PM fixes
for ast, async flips improvements and two fixes for nouveau to fix
resource refcounting and buffer placement.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801-interesting-antique-bat-2fe4c0@houat
|
|
Commit 804e498e0496 ("sd: convert to the atomic queue limits API")
introduced pairs of function calls to queue_limits_start_update() and
queue_limits_commit_update(). These two functions lock and unlock
q->limits_lock. In sd_revalidate_disk(), sd_read_cpr() is called after
queue_limits_start_update() call and before queue_limits_commit_update()
call. sd_read_cpr() locks q->sysfs_dir_lock and &q->sysfs_lock. Then new
lock dependencies were created between q->limits_lock, q->sysfs_dir_lock
and q->sysfs_lock, as follows:
sd_revalidate_disk
queue_limits_start_update
mutex_lock(&q->limits_lock)
sd_read_cpr
disk_set_independent_access_ranges
mutex_lock(&q->sysfs_dir_lock)
mutex_lock(&q->sysfs_lock)
mutex_unlock(&q->sysfs_lock)
mutex_unlock(&q->sysfs_dir_lock)
queue_limits_commit_update
mutex_unlock(&q->limits_lock)
However, the three locks already had reversed dependencies in other
places. Then the new dependencies triggered the lockdep WARN "possible
circular locking dependency detected" [1]. This WARN was observed by
running the blktests test case srp/002.
To avoid the WARN, move the sd_read_cpr() call in sd_revalidate_disk()
after the queue_limits_commit_update() call. In other words, move the
sd_read_cpr() call out of the q->limits_lock region.
[1] https://lore.kernel.org/linux-scsi/vlmv53ni3ltwxplig5qnw4xsl2h6ccxijfbqzekx76vxoim5a5@dekv7q3es3tx/
Fixes: 804e498e0496 ("sd: convert to the atomic queue limits API")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240801054234.540532-1-shinichiro.kawasaki@wdc.com
Tested-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The ufshcd_add_delay_before_dme_cmd() always introduces a delay of
MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not
required. The delay is added when the UFS host controller supplies the
quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS.
Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME
commands have the correct delay in the range of 0 to
MIN_DELAY_BEFORE_DME_CMDS_US.
Update the timestamp at the end of the function to ensure it captures the
latest time after any necessary delay has been applied.
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com
Fixes: cad2e03d8607 ("ufs: add support to allow non standard behaviours (quirks)")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Matthieu Baerts says:
====================
mptcp: fix endpoints with 'signal' and 'subflow' flags
When looking at improving the user experience around the MPTCP endpoints
setup, I noticed that setting an endpoint with both the 'signal' and the
'subflow' flags -- as it has been done in the past by users according to
bug reports we got -- was resulting on only announcing the endpoint, but
not using it to create subflows: the 'subflow' flag was then ignored.
My initial thought was to modify IPRoute2 to warn the user when the two
flags were set, but it doesn't sound normal to ignore one of them. I
then looked at modifying the kernel not to allow having the two flags
set, but when discussing about that with Mat, we thought it was maybe
not ideal to do that, as there might be use-cases, we might break some
configs. Then I saw it was working before v5.17. So instead, I fixed the
support on the kernel side (patch 5) using Paolo's suggestion. This also
includes a fix on the options side (patch 1: for v5.11+), an explicit
deny of some options combinations (patch 2: for v5.18+), and some
refactoring (patches 3 and 4) to ease the inclusion of the patch 5.
While at it, I added a new selftest (patch 7) to validate this case --
including a modification of the chk_add_nr helper to inverse the sides
were the counters are checked (patch 6) -- and allowed ADD_ADDR echo
just after the MP_JOIN 3WHS.
The selftests modification have the same Fixes tag as the previous
commit, but no 'Cc: Stable': if the backport can work, that's good --
but it still need to be verified by running the selftests -- if not, no
need to worry, many CIs will use the selftests from the last stable
version to validate previous stable releases.
====================
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-0-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.
Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.
That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.
Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.
An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.
Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It sounds better to avoid wasting cycles and / or put extreme memory
pressure on the system by trying to create new subflows if it was not
possible to add a new item in the announce list.
While at it, a warning is now printed if the entry was already in the
list as it should not happen with the in-kernel path-manager. With this
PM, mptcp_pm_alloc_anno_list() should only fail in case of memory
pressure.
Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
That will simplify the following commits.
No functional changes intended.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-3-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.
Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.
Fixes: 09f12c3ab7a5 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before this patch, receiving an ADD_ADDR echo on the just connected
MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was
resulting in an MP_RESET. That's because only ACKs with a DSS or
ADD_ADDRs without the echo bit were allowed.
Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as
we are not supposed to send an ADD_ADDR before because it requires to be
in full established mode first. For the MP_JOIN 3WHS, that's different:
the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo
can be received on the recently created one. The other peer will already
be in fully established, so it is allowed to send that.
We can then relax the conditions here to accept the ADD_ADDR echo for
MPJ subflows.
Fixes: 67b12f792d5e ("mptcp: full fully established support after ADD_ADDR")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
