summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-29drm/amdkfd: fix dropped interrupt in kfd_int_process_v11Graham Sider
Shader wave interrupts were getting dropped in event_interrupt_wq_v11 if the PRIV bit was set to 1. This would often lead to a hang. Until debugger logic is upstreamed, expand comment to stop early return. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: pass queue size and is_aql_queue to MESGraham Sider
Update mes_v11_api_def.h add_queue API with is_aql_queue parameter. Also re-use gds_size for the queue size (unused for KFD). MES requires the queue size in order to compute the actual wptr offset within the queue RB since it increases monotonically for AQL queues. v2: Make is_aql_queue assign clearer Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdkfd: fix MQD init for GFX11 in init_mqdGraham Sider
Set remaining compute_static_thread_mgmt_se* accordingly. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Enable SA software trap.David Belanger
Enables support for software trap for MES >= 4. Adapted from implementation from Jay Cornwall. v2: Add IP version check in conditions. v3: Remove debugger code changes. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/amdgpu: Add missing XGMI hive registers for mmhub 9.4.1Tom St Denis
These are used by umr to sort the hive nodes since the kernel initializes the nodes in order of bus enumeration not XGMI hive enumeration. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/vcn: update vcn4 fw shared data structureRuijing Dong
update VF_RB_SETUP_FLAG, add SMU_DPM_INTERFACE_FLAG, and corresponding change in VCN4. Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/sdma6: use common function to init sdma fwLikun Gao
Use common function to init sdma v6 firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: support sdma struct v2 fw initLikun Gao
Support SDMA firmware init on common function for sdma v2 struct. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/sdma5: use common function to init sdma fwLikun Gao
Use common function to init sdma v5 firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/sdma4: use common function to init sdma fwLikun Gao
Use common function to init sdma v4 firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add function to init SDMA microcodeLikun Gao
Add an common function to init SDMA related microcode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx11: use common function to init cp fwLikun Gao
Use common function to init gfx v11 CP firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx10: use common function to init CP fwLikun Gao
Use common function to init gfx v10 CP firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx9: use common function to init cp fwLikun Gao
Use common function to init gfx v9 CP firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add function to init CP microcodeLikun Gao
Add an common function to init CP related microcode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/pm: use adverse selection for dpm features unsupported by driverEvan Quan
It's vbios and pmfw instead of driver who decide whether some dpm features is supported or not. Driver just de-selects those features which are not permitted on user's request. Thus, we use adverse selects model. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/pm: enable gfxoff feature for SMU 13.0.0Evan Quan
The feature is ready with latest 78.58.0 PMFW. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: avoid gfx register accessing during gfxoffEvan Quan
Make sure gfxoff is disabled before gfx register accessing. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drivers/amd/pm: check the return value of amdgpu_bo_kmapLi Zhong
amdgpu_bo_kmap() returns error when fails to map buffer object. Add the error check and propagate the error. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Li Zhong <floridsleeves@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Use simplified API for p2p dist calcLijo Lazar
Use the simpified API that calculates distance between two devices. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Disable verbose for p2p dist calcLijo Lazar
Disable verbose while getting p2p distance. With verbose, it shows warning if ACS redirect is set between the devices. Adds noise to dmesg logs when a few GPU devices are on the same platform. Example log: amdgpu 0000:34:00.0: ACS redirect is set between the client and provider (0000:31:00.0) amdgpu 0000:34:00.0: to disable ACS redirect for this path, add the kernel parameter: pci=disable_acs_redir=0000:30:00.0;0000:2e:00.0;0000:33:00.0;0000:2e:10.0 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Fixed ras warning when uninstalling amdgpuYiPeng Chai
For the asic using smu v13_0_2, there is the following warning when uninstalling amdgpu: amdgpu: ras disable gfx failed poison:1 ret:-22. [Why]: For the asic using smu v13_0_2, the psp .suspend and mode1reset is called before amdgpu_ras_pre_fini during amdgpu uninstall, it has disabled all ras features and reset the psp. Since the psp is reset, calling amdgpu_ras_disable_all_features in amdgpu_ras_pre_fini to disable ras features will fail. [How]: If all ras features are disabled, amdgpu_ras_disable_all_features will not be called to disable all ras features again. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx11: switch to amdgpu_gfx_rlc_init_microcodeHawking Zhang
switch to common helper to initialize rlc firmware for gfx11 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx10: switch to amdgpu_gfx_rlc_init_microcodeHawking Zhang
switch to common helper to initialize rlc firmware for gfx10 v2: squash in size validation fix (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29perf tests record: Fail the test if the 'errs' counter is not zeroArnaldo Carvalho de Melo
We were just checking for the 'err' variable, when we should really see if there was some of the many checked errors that don't stop the test right away. Detected with clang 15.0.0: 44 75.23 fedora:37 : FAIL clang version 15.0.0 (Fedora 15.0.0-2.fc37) tests/perf-record.c:68:16: error: variable 'errs' set but not used [-Werror,-Wunused-but-set-variable] int err = -1, errs = 0, i, wakeups = 0; ^ 1 error generated. The patch introducing this 'perf test' entry had that check: + return (err < 0 || errs > 0) ? -1 : 0; But at some point we lost that: - return (err < 0 || errs > 0) ? -1 : 0; + if (err == -EACCES) + return TEST_SKIP; + if (err < 0) + return TEST_FAIL; + return TEST_OK Put it back. Fixes: 2cf88f4614c996e5 ("perf test: Use skip in PERF_RECORD_*") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YzR0n5QhsH9VyYB0@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-29perf test: Fix test case 87 ("perf record tests") for hybrid systemsZhengjun Xing
The test case 87 ("perf record tests") failed on hybrid systems,the event "cpu/br_inst_retired.near_call/p" is only for non-hybrid system. Correct the test event to support both non-hybrid and hybrid systems. Before: # ./perf test 87 87: perf record tests : FAILED! After: # ./perf test 87 87: perf record tests : Ok Fixes: 24f378e66021f559 ("perf test: Add basic perf record tests") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220927051513.3768717-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-29Merge tag 'ata-6.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fixes from Damien Le Moal: "Three late patches to fix problems discovered recently: - Add a horkage to disable link power management by default for the Pioneer BDR-207M and BDR-205 DVD drives (from Niklas) - Two patches to fix setting the maximum queue depth of libsas owned ATA devices (from me)" * tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-sata: Fix device queue depth control ata: libata-scsi: Fix initialization of device queue depth libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
2022-09-29Merge tag 'loongarch-fixes-6.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Some trivial fixes and cleanup" * tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Clean up loongson3_smp_ops declaration LoongArch: Fix and cleanup csr_era handling in do_ri() LoongArch: Align the address of kernel_entry to 4KB
2022-09-29net: cpmac: Add __init/__exit annotations to module init/exit funcsruanjinjie
Add __init/__exit annotations to module init/exit funcs Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220928031708.89120-1-ruanjinjie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29ethernet: 8390: remove unnecessary check of memYang Yingliang
The 'mem' returned by platform_get_resource() has been checked in probe function, so it is no need do this check in remove function. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220927151406.797800-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29nfp: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Link: https://lore.kernel.org/r/20220927141835.19221-1-shangxiaojing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29net: liquidio: Remove unused struct lio_trusted_vf_ctxYuan Can
After commit 6870957ed5bc("liquidio: make soft command calls synchronous"), no one use struct lio_trusted_vf_ctx, so remove it. Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20220927133940.104181-1-yuancan@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29net: ethernet: mtk_eth_soc: use DEFINE_SHOW_ATTRIBUTE to simplify codeLiu Shixin
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No functional change. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20220927111925.2424100-1-liushixin2@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29wwan_hwsim: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20220927024511.14665-1-shangxiaojing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29net: ax88796c: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20220927023043.17769-1-shangxiaojing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29ethernet: s2io: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing
Use skb_put_data() instead of skb_put() and memcpy(), which is shorter and clear. Drop the tmp variable that is not needed any more. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20220927022802.16050-1-shangxiaojing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29wifi: rtl8xxxu: Improve rtl8xxxu_queue_selectBitterblue Smith
Remove the unused ieee80211_hw* parameter, and pass ieee80211_hdr* instead of relying on skb->data having the right value at the time the function is called. This doesn't change the functionality at all. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/2af44c28-1c12-46b9-85b9-011560bf7f7e@gmail.com
2022-09-29wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAMBitterblue Smith
ieee80211_tx_queue_params.aifs is not supposed to be written directly to the REG_EDCA_*_PARAM registers. Instead process it like the vendor drivers do. It's kinda hacky but it works. This change boosts the download speed and makes it more stable. Tested with RTL8188FU but all the other supported chips should also benefit. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/038cc03f-3567-77ba-a7bd-c4930e3b2fad@gmail.com
2022-09-29wifi: rtl8xxxu: gen2: Enable 40 MHz channel widthBitterblue Smith
The module parameter ht40_2g was supposed to enable 40 MHz operation, but it didn't. Tell the firmware about the channel width when updating the rate mask. This makes it work with my gen 2 chip RTL8188FU. I'm not sure if anything needs to be done for the gen 1 chips, if 40 MHz channel width already works or not. They update the rate mask with a different structure which doesn't have a field for the channel width. Also set the channel width correctly for sta_statistics. Fixes: f653e69009c6 ("rtl8xxxu: Implement basic 8723b specific update_rate_mask() function") Fixes: bd917b3d28c9 ("rtl8xxxu: fill up txrate info for gen1 chips") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3a950997-7580-8a6b-97a0-e0a81a135456@gmail.com
2022-09-29xfrm: mip6: add extack to mip6_destopt_init_state, mip6_rthdr_init_stateSabrina Dubroca
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-29xfrm: ipcomp: add extack to ipcomp{4,6}_init_stateSabrina Dubroca
And the shared helper ipcomp_init_state. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-29xfrm: tunnel: add extack to ipip_init_state, xfrm6_tunnel_init_stateSabrina Dubroca
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-29xfrm: esp: add extack to esp_init_state, esp6_init_stateSabrina Dubroca
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-29xfrm: ah: add extack to ah_init_state, ah6_init_stateSabrina Dubroca
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-29xfrm: pass extack down to xfrm_type ->init_stateSabrina Dubroca
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-28Merge tag 'mlx5-updates-2022-09-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2022-09-27 This is Part #1 of 4 parts series to align mlx5's implementation of XSK (AF_XDP) RX-Qs indexing and management with other vendors: Maxim Says: =========== xsk: Bug fixes for frame mapping on striding RQ Striding RQ relies on the driver mapping RX buffers into the NIC's virtual memory space. Currently, regadless of the XSK frame size, mlx5e maps them using MTT, and each mapping's length is PAGE_SIZE. As the result, the stride size used by striding RQ is also equal to PAGE_SIZE. This decision has the following issues: 1. In the XSK aligned mode with frame size smaller than PAGE_SIZE, it's suboptimal. Using 2K strides and 2K pages allows to post twice as fewer WQEs. 2. MTT is not suitable for unaligned frames, as it requires natural alignment theoretically, in practice at least 8-byte alignment. 3. Using mapping and stride bigger than the frame has risk of writing over the bounds of the XSK frame upon receiving packets bigger than MTU, which is possible in some specific configurations. This series addresses issues 1 and 2 and alleviates issue 3. Where possible, page and stride size will match the XSK frame size (firmware upgrade may be needed to have effect for 2K frames). Unaligned mode will use KSM instead of MTT, which allows to drop the partial workaround [1]. [1]: https://lore.kernel.org/netdev/YufYFQ6JN91lQbso@boxer/T/ ==================== Link: https://lore.kernel.org/r/20220927203611.244301-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net/mlx5e: Use runtime values of striding RQ parameters in datapathMaxim Mikityanskiy
Some of the parameters of striding RQ are compile-time constants, but they are going to become dynamically calculated at runtime in a following commit. This commit prepares the datapath to take cached runtime parameters, prefilled at queue creation. New fields added to struct mlx5e_rq fit into an existing 7-byte hole. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net/mlx5e: Make dma_info array dynamic in struct mlx5e_mpw_infoMaxim Mikityanskiy
This commit moves the dma_info array to the end of struct mlx5e_mpw_info to make it a flexible array. It also removes the intermediate struct mlx5e_umr_dma_info, which used to contain only this array. The flexibility of dma_info will allow to choose its size dynamically in a following commit. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net/mlx5e: Improve the MTU change shortcutMaxim Mikityanskiy
Normally, the MTU change requires reopening the channels, but it can be skipped if the new MTU doesn't change any of the queue parameters and if MTU is not used in the data path. The shortcut is applicable to the non-linear mode of striding RQ, because the only thing affected by MTU is the queue length. As ethtool sets the queue length in packets, but striding RQ length is defined in strides or bytes, we estimate the RQ length to be at least as big as the requested number of MTU-sized packets, that's why it depends on MTU. Improve the shortcut by actually checking whether the RQ length stayed the same, instead of an intermediate step in the calculation. As MTU also affects the SHAMPO parameters, skip the shortcut if SHAMPO is in use. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net/mlx5e: xsk: Fix SKB headroom calculation in validationMaxim Mikityanskiy
In a typical scenario, if an XSK socket is opened first, then an XDP program is attached, mlx5e_validate_xsk_param will be called twice: first on XSK bind, second on channel restart caused by enabling XDP. The validation includes a call to mlx5e_rx_is_linear_skb, which checks the presence of the XDP program. The above means that mlx5e_rx_is_linear_skb might return true the first time, but false the second time, as mlx5e_rx_get_linear_sz_skb's return value will increase, because of a different headroom used with XDP. As XSK RQs never exist without XDP, it would make sense to trick mlx5e_rx_get_linear_sz_skb into thinking XDP is enabled at the first check as well. This way, if MTU is too big, it would be detected on XSK bind, without giving false hope to the userspace application. However, it turns out that this check is too restrictive in the first place. SKBs created on XDP_PASS on XSK RQs don't have any headroom. That means that big MTUs filtered out on the first and the second checks might actually work. So, address this issue in the proper way, but taking into account the absence of the SKB headroom on XSK RQs, when calculating the buffer size. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-23 01:42:55 +0000