| Age | Commit message (Collapse) | Author |
|---|
|
This patch removes the linux-soc mailing list from the Qualcomm SoC
entry. We use the linux-msm and there is no need to have the second
one and this clears the list for use by others.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Few minor fixes for omaps for v4.20-rc cycle
This set of fixes contains minor regression fixes for LogicPD dts files
for MMC pinctrl and interrupts. There is also one section annotation fix
that shows up with Clang, and a fix for an unitialized field for omap1.
* tag 'omap-for-v4.20/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: ams-delta: Fix possible use of uninitialized field
ARM: dts: am3517-som: Fix WL127x Wifi interrupt
ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1
ARM: dts: LogicPD Torpedo: Fix mmc3_dat1 interrupt
ARM: dts: am3517: Fix pinmuxing for CD on MMC1
ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
DaVinci: fix GPIO breakage after v4.19
This set of changes is needed to fix the broken GPIO support
for DaVinci boards in legacy mode after certain changes made to the
GPIO driver in 4.19, namely: commits 587f7a694f01 ("gpio: davinci: Use
dev name for label and automatic base selection") and eb3744a2dd01
("gpio: davinci: Do not assume continuous IRQ numbering").
* tag 'davinci-fixes-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: dm644x: set the GPIO base to 0
ARM: davinci: da830: set the GPIO base to 0
ARM: davinci: dm355: set the GPIO base to 0
ARM: davinci: dm646x: set the GPIO base to 0
ARM: davinci: dm365: set the GPIO base to 0
ARM: davinci: da850: set the GPIO base to 0
gpio: davinci: restore a way to manually specify the GPIO base
ARM: davinci: dm644x: define gpio interrupts as separate resources
ARM: davinci: dm355: define gpio interrupts as separate resources
ARM: davinci: dm646x: define gpio interrupts as separate resources
ARM: davinci: dm365: define gpio interrupts as separate resources
ARM: davinci: da8xx: define gpio interrupts as separate resources
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Removal of vdd_log regulator on rk960 to fix a stability issue
and fixup of the pcie reset polarity on puma-haikou.
* tag 'v4.20-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
arm64: dts: rockchip: remove vdd_log from rock960 to fix a stability issues
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Moving the veyron memory node from memory@0 back to memory, as the
firmware on these devices as issues identifying the formally correct
node.
* tag 'v4.20-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Remove @0 from the veyron memory node
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into fixes
AT91 fixes for 4.20
- Fix the SMC parent clock
* tag 'at91-4.20-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2: use the divided clock for SMC
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and
automatic base selection") broke the GPIO support on DaVinci boards
in legacy mode by allowing gpiolib to set the GPIO base automatically.
DaVinci board files use the legacy GPIO API with hard-coded GPIO line
numbers. Use the new fields in struct davinci_gpio_platform_data to
manually set the GPIO base to 0.
Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and
automatic base selection") broke the GPIO support on DaVinci boards
in legacy mode by allowing gpiolib to set the GPIO base automatically.
DaVinci board files use the legacy GPIO API with hard-coded GPIO line
numbers. Use the new fields in struct davinci_gpio_platform_data to
manually set the GPIO base to 0.
Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and
automatic base selection") broke the GPIO support on DaVinci boards
in legacy mode by allowing gpiolib to set the GPIO base automatically.
DaVinci board files use the legacy GPIO API with hard-coded GPIO line
numbers. Use the new fields in struct davinci_gpio_platform_data to
manually set the GPIO base to 0.
Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and
automatic base selection") broke the GPIO support on DaVinci boards
in legacy mode by allowing gpiolib to set the GPIO base automatically.
DaVinci board files use the legacy GPIO API with hard-coded GPIO line
numbers. Use the new fields in struct davinci_gpio_platform_data to
manually set the GPIO base to 0.
Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and
automatic base selection") broke the GPIO support on DaVinci boards
in legacy mode by allowing gpiolib to set the GPIO base automatically.
DaVinci board files use the legacy GPIO API with hard-coded GPIO line
numbers. Use the new fields in struct davinci_gpio_platform_data to
manually set the GPIO base to 0.
Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and
automatic base selection") broke the network support in legacy boot
mode for da850-evm since we can no longer request the MDIO clock GPIO.
We now have the option to specify the GPIO base manually for davinci,
so add the relevant fields to platform data.
Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and
automatic base selection") broke the network support in legacy boot
mode for da850-evm since we can no longer request the MDIO clock GPIO.
Other boards may be broken too, which I haven't tested.
The problem is in the fact that most board files still use the legacy
GPIO API where lines are requested by numbers rather than descriptors.
While this should be fixed eventually, in order to unbreak the board
for now - provide a way to manually specify the GPIO base in platform
data.
Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous
IRQ numbering") the davinci GPIO driver fails to probe if we boot
in legacy mode from any of the board files. Since the driver now
expects every interrupt to be defined as a separate resource, split
the definition of IRQ resources instead of having a single continuous
interrupt range.
Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous
IRQ numbering") the davinci GPIO driver fails to probe if we boot
in legacy mode from any of the board files. Since the driver now
expects every interrupt to be defined as a separate resource, split
the definition of IRQ resources instead of having a single continuous
interrupt range.
Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous
IRQ numbering") the davinci GPIO driver fails to probe if we boot
in legacy mode from any of the board files. Since the driver now
expects every interrupt to be defined as a separate resource, split
the definition of IRQ resources instead of having a single continuous
interrupt range.
Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous
IRQ numbering") the davinci GPIO driver fails to probe if we boot
in legacy mode from any of the board files. Since the driver now
expects every interrupt to be defined as a separate resource, split
the definition of IRQ resources instead of having a single continuous
interrupt range.
Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous
IRQ numbering") the davinci GPIO driver fails to probe if we boot
in legacy mode from any of the board files. Since the driver now
expects every interrupt to be defined as a separate resource, split
the definition of IRQ resources instead of having a single continuous
interrupt range.
Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two
different clocks for the peripherals in the SoC. The Static Memory
controller is connected to the divided master clock.
Unfortunately, the device tree does not correctly show this and uses the
master clock directly. This clock is then used by the code for the NAND
controller to calculate the timings for the controller, and we end up with
slow NAND Flash access.
Fix the device tree, and the performance of Flash access is improved.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The Coreboot version on veyron ChromeOS devices seems to ignore
memory@0 nodes when updating the available memory and instead
inserts another memory node without the address.
This leads to 4GB systems only ever be using 2GB as the memory@0
node takes precedence. So remove the @0 for veyron devices.
Fixes: 0b639b815f15 ("ARM: dts: rockchip: Add missing unit name to memory nodes in rk3288 boards")
Cc: stable@vger.kernel.org
Reported-by: Heikki Lindholm <holin@iki.fi>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://github.com/Broadcom/stblinux into fixes
This pull request contains update to the MAINTAINERS file for Broadcom
SoCs, please pull the following changes for 4.20:
- Jon removes himself from the MAINTAINERS file since he is no longer
with Broadcom
* tag 'arm-soc/for-4.20/maintainers-part2' of https://github.com/Broadcom/stblinux:
MAINTAINERS: Remove self from Broadcom SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This patch fixes the wrong polarity setting for the PCIe host driver's
pre-reset pin for rk3399-puma-haikou. Without this patch link training
will most likely fail.
Fixes: 60fd9f72ce8a ("arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM")
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into fixes
Texas Instruments AM65x fixes for v4.20
- Fix the wkup uart instance addresses to use proper cell sizes, otherwise
the uart fails to probe.
* tag 'am654-fixes-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes
Qualcomm ARM64 DT Fixes for 4.20-rc1
* Fix reserved gpio ranges for SDM845 and MSM8998
* tag 'qcom-fixes-for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP
arm64: dts: sdm845-mtp: Reserve reserved gpios
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
GPIOs 0 through 3 and 81 through 84 are configured to not be accessible
from the application CPUs. Mark them as reserved to allow the MSM8998
MTP to boot after the introduction of 3edfb7bd76bd ("gpiolib: Show
correct direction from the beginning").
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
With the introduction of commit 3edfb7bd76bd ("gpiolib: Show correct
direction from the beginning") the gpiolib will attempt to read the
direction of all pins, which triggers a read from protected register
regions.
The pins 0 through 3 and 81 through 84 are protected, so mark these as
reserved.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
cbass_wakeup interconnect which is the parent of wakeup_uart node
defines address-cells=1 and size-cells=1, therefore fix up reg property
of wakeup_uart node accordingly. Otherwise, this UART instance fails to
probe if enabled.
Fixes: 4201af2544b3 ("arm64: dts: ti: am654: Add uart nodes")
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
|
|
While playing with initialization order of modem device, it has been
discovered that under some circumstances (early console init, I
believe) its .pm() callback may be called before the
uart_port->private_data pointer is initialized from
plat_serial8250_port->private_data, resulting in NULL pointer
dereference. Fix it by checking for uninitialized pointer before using
it in modem_pm().
Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
At the same time the AM3517 EVM was gaining WiFi support,
separate patches were introduced to move the interrupt
from HIGH to RISING. Because they overlapped, this was not
done to the AM3517-EVM. This patch fixes Kernel 4.19+
Fixes: 6bf5e3410f19 ("ARM: dts: am3517-som: Add WL127x Wifi")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The interrupt on mmc3_dat1 is wrong which prevents this from
appearing in /proc/interrupts.
Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV") #Kernel 4.9+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
When the Torpedo was first introduced back at Kernel 4.2,
the interrupt extended flag has been set incorrectly.
It was subsequently moved, so this patch corrects Kernel
4.18+
Fixes: a38867305203 ("ARM: dts: Move move WiFi bindings to
logicpd-torpedo-37xx-devkit") # v4.18+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The MMC1 is active low, not active high. For some reason,
this worked with different combination of U-Boot and kernels,
but it's supposed to be active low and is currently broken.
Fixes: cfaa856a2510 ("ARM: dts: am3517: Add pinmuxing, CD and
WP for MMC1") #kernel 4.18+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes
ARM: dts: stratix10: fix multicast filtering
On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This
needs to be specified in DTS, otherwise the stmmac driver defaults to 64
buckets and initializes the filter incorrectly. As a result, e.g. valid
IPv6 multicast traffic ends up being dropped.
* tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: fix multicast filtering
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v4.20
* R-Car V3H (r8a77980) based Condor board
- Switch from EtherAVB to GEther to match offical boards
* RZ/G2E (ra8774c0) SoC: correct documentation of part number
* R-Car H3 (r8a7795) SoC: reinstate all DMA channels on HSCIF2
* tag 'renesas-fixes-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: condor: switch from EtherAVB to GEther
dt-bindings: arm: Fix RZ/G2E part number
arm64: dts: renesas: r8a7795: add missing dma-names on hscif2
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This
needs to be specified in DTS, otherwise the stmmac driver defaults to 64
buckets and initializes the filter incorrectly. As a result, e.g. valid
IPv6 multicast traffic ends up being dropped.
Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi")
Cc: stable@vger.kernel.org
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
I'm leaving Broadcom, and will no longer have access to hardware and
documentation necessary to be effective in a maintainership role.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.20:
- Add boot-on and always-on for imx6sx-sdb phy regulator to fix enet
resume problem, which is exposed by commit ("regulator: fixed:
Convert to use GPIO descriptor only").
- Fix improperly quoted stdout-path values for imx53-ppd and
vf610m4-colibri board.
- Fix the typo of compatible string "fs,imx6sll-i2c" which should be
"fsl,imx6sll-i2c".
* tag 'imx-fixes-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6sx-sdb: Fix enet phy regulator
ARM: dts: fsl: Fix improperly quoted stdout-path values
ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
I should have let this soak for a while in linux-next, since we have at
least one board that hit a regression from it. Revert from 4.20-rc, and
we'll queue it for next merge window once regression is fixed.
This reverts commit 513eb98595522bc0cb83831a9daee1d5738e66f1.
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The "official" Condor boards have always been wired to mount NFS via
GEther, not EtherAVB -- the boards resoldered for EtherAVB were local
to Cogent Embedded, so we've been having an unpleasant situation where
a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY
extension board is plugged in). Switch from EtherAVB to GEther at last!
Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Fix RZ/G2E part number from its description.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
hscif2 has 4 dmas, but has only 2 dma-names.
This patch add missing dma-names.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: e0f0bda79337701a ("arm64: dts: renesas: r8a7795: sort subnodes
of the soc node")
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
When the performance governor is set as default, the rock960 hangs
around one minute after booting, whatever the activity is (idle, key
pressed, loaded, ...).
Based on the commit log found at https://patchwork.kernel.org/patch/10092377/
"vdd_log has no consumer and therefore will not be set to a specific
voltage. Still the PWM output pin gets configured and thence the vdd_log
output voltage will changed from it's default. Depending on the idle
state of the PWM this will slightly over or undervoltage the logic supply
of the RK3399 and cause instability with GbE (undervoltage) and PCIe
(overvoltage). Since the default value set by a voltage divider is the
correct supply voltage and we don't need to change it during runtime we
remove the rail from the devicetree completely so the PWM pin will not
be configured."
After removing the vdd-log from the rock960's specific DT, the board
does no longer hang and shows a stable behavior.
Apply the same change for the rock960 by removing the vdd-log from the
DT.
Fixes: 874846f1fccd ("arm64: dts: rockchip: add 96boards RK3399 Ficus board")
Cc: stable@vger.kernel.org
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Bindings for "fixed-regulator" only explicitly support "gpio" property,
not "gpios". Fix by correcting the property name.
The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power
cycle, this can be handled by the phy-reset-gpios property. Sadly this
is not handled on suspend: the fec driver turns phy-supply off but
doesn't assert phy-reset-gpios again on resume.
Since additional phy-level work is required to support powering off the
phy in suspend fix the problem by just marking the regulator as
"boot-on" "always-on" so that it's never turned off. This behavior is
equivalent to older releases.
Keep the phy-reset-gpios property on fec anyway because it is a correct
description of board design.
This issue was exposed by commit efdfeb079cc3 ("regulator: fixed:
Convert to use GPIO descriptor only") which causes the "gpios" property
to also be parsed. Before that commit the "gpios" property had no
effect, PHY reset was only handled in the the bootloader.
This fixes linux-next boot failures previously reported here:
https://lore.kernel.org/patchwork/patch/982437/#1177900
https://lore.kernel.org/patchwork/patch/994091/#1178304
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
A quoted label reference doesn't expand to the node path and is taken as
a literal string. Dropping the quotes can fix this unless the baudrate
string is appended in which case we have to use the alias.
At least on VF610, the problem was masked by setting the console in
bootargs. Use the alias syntax with baudrate parameter so we can drop
setting the console in bootargs.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix the type of compatible string "fs,imx6sll-i2c" which should be
"fsl,imx6sll-i2c".
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
|
|
Pull UBIFS updates from Richard Weinberger:
- Full filesystem authentication feature, UBIFS is now able to have the
whole filesystem structure authenticated plus user data encrypted and
authenticated.
- Minor cleanups
* tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits)
ubifs: Remove unneeded semicolon
Documentation: ubifs: Add authentication whitepaper
ubifs: Enable authentication support
ubifs: Do not update inode size in-place in authenticated mode
ubifs: Add hashes and HMACs to default filesystem
ubifs: authentication: Authenticate super block node
ubifs: Create hash for default LPT
ubfis: authentication: Authenticate master node
ubifs: authentication: Authenticate LPT
ubifs: Authenticate replayed journal
ubifs: Add auth nodes to garbage collector journal head
ubifs: Add authentication nodes to journal
ubifs: authentication: Add hashes to index nodes
ubifs: Add hashes to the tree node cache
ubifs: Create functions to embed a HMAC in a node
ubifs: Add helper functions for authentication support
ubifs: Add separate functions to init/crc a node
ubifs: Format changes for authentication support
ubifs: Store read superblock node
ubifs: Drop write_node
...
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Bugfix:
- Fix build issues on architectures that don't provide 64-bit cmpxchg
Cleanups:
- Fix a spelling mistake"
* tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: fix spelling mistake, EACCESS -> EACCES
SUNRPC: Use atomic(64)_t for seq_send(64)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more timer updates from Thomas Gleixner:
"A set of commits for the new C-SKY architecture timers"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: timer: gx6605s SOC timer
clocksource/drivers/c-sky: Add gx6605s SOC system timer
dt-bindings: timer: C-SKY Multi-processor timer
clocksource/drivers/c-sky: Add C-SKY SMP timer
|
