| Age | Commit message (Collapse) | Author |
|---|
|
Add DT compatible for SolidRun Armada-385 based Clearfog GTR L8 and S4
boards.
Despite similar name these two boards are designed differently from the
armada 388 clearfog base and pro, they only share a name and general use
case.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Add DT compatible for the helios-4 nas by Kobol, which is already used
in-tree.
This product shares a common system on module with the solidrun armada
388 clearfog boards, however it is not easily described in a single
list due to their extra "solidrun,clearfog-a1" compatible string.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Add DT compatible for SolidRun Armada-388 based Clearfog Base and Pro
boards, which are already in place in-tree.
There are already 3 distinct dts in tree for these *two* boards,
declaring particular compatible strings:
the generic "armada-388-clearfog.dts" is a legacy name for the Pro
version, old versions of u-boot built when only one variant existed
explicitly boot by this name.
The other two add explicit -pro / -base suffix to the filename, these
are preferred and chosen by latest u-boot.
Note that both compatibles and model field include the string "A1".
At least up to revision 2.0 of the board, this had been printed
on the pcb. However in marketing material and conversations it is
usually omitted. "Clearfog Pro" and "Clearfog Pro A1" always mean
exactly the same product.
Technically Base and Pro variants are similar enough that they can
successfully boot with each other's dts. Hence it makes (some)
sense for them to share the "clearfog-a1" compatible.
Add bindings for the explicit variants -pro and -base - including a
shared compatible string between the two.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Convert the existing txt binding for armada-38x socs to DT schema
format.
The current bindings documentation for armada-38x are only listing SoCs,
but no actual boards. Only actual boards should be listed.
Replace the dropped entries with some actual baords that already have
valid compatibles in-tree:
- armada 380 netgear switch
- armada 385 marvell development boards
- armada 388 development board
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
|
|
Add PCLK_VO1GRF to complement PCLK_VO0GRF. This will be needed
for HDMI support.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240126182919.48402-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
CLK_NR_CLKS should not be part of the binding. Let's drop it, since
the kernel code no longer uses it either.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240126182919.48402-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
CLK_NR_CLKS is not part of the DT bindings and needs to be removed
from it, just like it recently happened for other platforms. This
takes care of it by introducing a new function identifying the
maximum used clock ID at runtime.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240126182919.48402-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add rest of Linux Amlogic Meson SoC maintainers and reviewers to the
Amlogic board/SoC binding maintainers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240224084030.5867-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Amlogic bindings were marked as work-in-progress / unstable in 2017 in
commit 7e8634e821e1 ("dt-bindings: amlogic: add unstable statement").
Almost seven years is enough, so drop the "unstable" remark and expect
usual ABI rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240224084030.5867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
struct veth_rq is pretty large, 832B total without debug
options enabled. Since commit under Fixes we try to pre-allocate
enough queues for every possible CPU. Miao Wang reports that
this may lead to order-5 allocations which will fail in production.
Let the allocation fallback to vmalloc() and try harder.
These are the same flags we pass to netdev queue allocation.
Reported-and-tested-by: Miao Wang <shankerwangmiao@gmail.com>
Fixes: 9d3684c24a52 ("veth: create by default nr_possible_cpus queues")
Link: https://lore.kernel.org/all/5F52CAE2-2FB7-4712-95F1-3312FBBFA8DD@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240223235908.693010-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
One patch of a series of three that was sent fixing issues with the
ppc4xx driver was targeted at -next, unfortunately it being sandwiched
between two others that targeted mainline tripped up my workflow and
caused it to get merged along with the others. The ppc4xx driver is
only buildable in very limited configurations so none of the CI catches
issues with it.
Fixes: de4af897ddf2 ("spi: ppc4xx: Fix fallout from rename in struct spi_bitbang")
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Shannon Nelson says:
====================
ionic: PCI error handling fixes
These are a few things to make our PCI reset handling better.
====================
Link: https://lore.kernel.org/r/20240223222742.13923-1-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When rebuilding the lif after an FLR, be sure to restore the
current netdev features, not do the usual first time feature
init. This prevents losing user changes to things like TSO
or vlan tagging states.
Fixes: 45b84188a0a4 ("ionic: keep filters across FLR")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since we now have potential cases of NULL cmd_regs and info_regs
during a reset recovery, and left NULL if a reset recovery has
failed, we need to check that they exist before we use them.
Most of the cases were covered in the original patch where we
verify before doing the ioreadb() for health or cmd status.
However, we need to protect a few uses of io mem that could
be hit in error recovery or asynchronous threads calls as well
(e.g. ethtool or devlink handlers).
Fixes: 219e183272b4 ("ionic: no fw read when PCI reset failed")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AER recovery handler can trigger a PCI Reset after tearing
down the device setup in the error detection handler. The PCI
Reset handler will also attempt to tear down the device setup,
and this second tear down needs to know that it doesn't need
to call pci_release_regions() a second time. We can clear
num_bars on tear down and use that to decide later if we need
to clear the resources. This prevents a harmless but disturbing
warning message
resource: Trying to free nonexistent resource <0xXXXXXXXXXX-0xXXXXXXXXXX>
Fixes: c3a910e1c47a ("ionic: fill out pci error handlers")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224134742.829325-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224134925.829677-1-chengming.zhou@linux.dev
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224134935.829715-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224135028.829910-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224135048.829987-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224135104.830045-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224135126.830110-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224135143.830142-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224135158.830266-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224135315.830477-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The following patch accidentally removed the code for delivering
completions for cancelled reads and writes to user space: "[PATCH 04/33]
aio: remove retry-based AIO"
(https://lore.kernel.org/all/1363883754-27966-5-git-send-email-koverstreet@google.com/)
>From that patch:
- if (kiocbIsCancelled(iocb)) {
- ret = -EINTR;
- aio_complete(iocb, ret, 0);
- /* must not access the iocb after this */
- goto out;
- }
This leads to a leak in user space of a struct iocb. Hence this patch
that restores the code that reports to user space that a read or write
has been cancelled successfully.
Fixes: 41003a7bcfed ("aio: remove retry-based AIO")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240215204739.2677806-3-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If a directory has a block with only ".__afsXXXX" files in it (from
uncompleted silly-rename), these .__afsXXXX files are skipped but without
advancing the file position in the dir_context. This leads to
afs_dir_iterate() repeating the block again and again.
Fix this by making the code that skips the .__afsXXXX file also manually
advance the file position.
The symptoms are a soft lookup:
watchdog: BUG: soft lockup - CPU#3 stuck for 52s! [check:5737]
...
RIP: 0010:afs_dir_iterate_block+0x39/0x1fd
...
? watchdog_timer_fn+0x1a6/0x213
...
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? afs_dir_iterate_block+0x39/0x1fd
afs_dir_iterate+0x10a/0x148
afs_readdir+0x30/0x4a
iterate_dir+0x93/0xd3
__do_sys_getdents64+0x6b/0xd4
This is almost certainly the actual fix for:
https://bugzilla.kernel.org/show_bug.cgi?id=218496
Fixes: 57e9d49c5452 ("afs: Hide silly-rename files from userspace")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/786185.1708694102@warthog.procyon.org.uk
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently intel_hdcp is not being extracted from primary connector
this patch fixes that.
Fixes: 524240b231ea ("drm/i915/hdcp: Propagate aux info in DP HDCP functions")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-3-suraj.kandpal@intel.com
(cherry picked from commit 909fff3e46c08eb6fcbb52e7a49dfb359007ae79)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
MP25 FMC2 domain has to be kept on. To handle it throw PSCI OS-initiated,
basic PM for keeping domain on is introduced.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20240226101428.37791-6-christophe.kerello@foss.st.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The FMC2 revision 2 supports security and isolation compliant with
the Resource Isolation Framework (RIF). From RIF point of view,
the FMC2 is composed of several independent resources, listed below,
which can be assigned to different security and compartment domains:
- 0: Common FMC_CFGR register.
- 1: EBI controller for Chip Select 1.
- 2: EBI controller for Chip Select 2.
- 3: EBI controller for Chip Select 3.
- 4: EBI controller for Chip Select 4.
- 5: NAND controller.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20240226101428.37791-5-christophe.kerello@foss.st.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add the support of the revision 2 of FMC2 IP.
- PCSCNTR register has been removed,
- CFGR register has been added,
- the bit used to enable the IP has moved from BCR1 to CFGR,
- the timeout for CEx deassertion has moved from PCSCNTR to BCRx,
- the continuous clock enable has moved from BCR1 to CFGR,
- the clk divide ratio has moved from BCR1 to CFGR.
The MP1 SoCs have only one signal to manage all the controllers (NWAIT).
The MP25 SOC has one RNB signal for the NAND controller and one NWAIT
signal for the memory controller.
Let's use a platform data structure for parameters that will differ
between MP1 and MP25.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20240226101428.37791-4-christophe.kerello@foss.st.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Check regmap_read return value to avoid to use uninitialized local
variables.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20240226101428.37791-3-christophe.kerello@foss.st.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add a new compatible string to support MP25 SoC.
On MP1 SoC, RNB signal (NAND controller signal) and NWAIT signal (PSRAM
controller signal) have been integrated together in the SoC. That means
that the NAND controller and the PSRAM controller (if the signal is
used) can not be used at the same time. On MP25 SoC, the 2 signals can
be used outside the SoC, so there is no more restrictions.
MP1 SoC also embeds revision 1.1 of the FMC2 IP when MP25 SoC embeds
revision 2.0 of the FMC2 IP.
MP25 SoC is also using PSCI OS-initiated mode, so allow a single
'power-domains' entry for STM32 FMC2. As MP1 will move on PSCI
OS-initiated mode, add this property as optional for all FMC2 variants.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20240226101428.37791-2-christophe.kerello@foss.st.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Conflicts:
arch/x86/kernel/cpu/common.c
arch/x86/kernel/cpu/intel.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
These functions are mostly pointless on UP, but nevertheless the
64-bit UP APIC build already depends on the existence of
topology_apply_cmdline_limits_early(), which caused a build bug,
resolve it by making them available under CONFIG_X86_LOCAL_APIC,
as their prototypes already are.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This was already defined locally by init/main.c, but let's make
it generic, as arch/x86/kernel/cpu/topology.c is going to make
use of it to have more uniform code.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
bringup_nonboot_cpus() gets passed the 'setup_max_cpus'
variable in init/main.c - which is also the name of the parameter,
shadowing the name.
To reduce confusion and to allow the 'setup_max_cpus' value
to be #defined in the <linux/smp.h> header, use the 'max_cpus'
name for the function parameter name.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
|
|
It had pop noise from Headphone port when system reboot state.
If NID 58h Index 0x0 to fill default value, it will reduce pop noise.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/7493e207919a4fb3a0599324fd010e3e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
FSDAX and reflink can work together now, let's drop this warning.
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: more misc. fixes for v6.8
This series includes 6 types of fixes:
- Patch 1 fixes v4 mapped in v6 addresses support for the userspace PM,
when asking to delete a subflow. It was done everywhere else, but not
there. Patch 2 validates the modification, thanks to a subtest in
mptcp_join.sh. These patches can be backported up to v5.19.
- Patch 3 is a small fix for a recent bug-fix patch, just to avoid
printing an irrelevant warning (pr_warn()) once. It can be backported
up to v5.6, alongside the bug-fix that has been introduced in the
v6.8-rc5.
- Patches 4 to 6 are fixes for bugs found by Paolo while working on
TCP_NOTSENT_LOWAT support for MPTCP. These fixes can improve the
performances in some cases. Patches can be backported up to v5.6,
v5.11 and v6.7 respectively.
- Patch 7 makes sure 'ss -M' is available when starting MPTCP Join
selftest as it is required for some subtests since v5.18.
- Patch 8 fixes a possible double-free on socket dismantle. The issue
always existed, but was unnoticed because it was not causing any
problem so far. This fix can be backported up to v5.6.
- Patch 9 is a fix for a very recent patch causing lockdep warnings in
subflow diag. The patch causing the regression -- which fixes another
issue present since v5.7 -- should be part of the future v6.8-rc6.
Patch 10 validates the modification, thanks to a new subtest in
diag.sh.
====================
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-0-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mptcp diag interface already experienced a few locking bugs
that lockdep and appropriate coverage have detected in advance.
Let's add a test-case triggering the relevant code path, to prevent
similar issues in the future.
Be careful to cope with very slow environments.
Note that we don't need an explicit timeout on the mptcp_connect
subprocess to cope with eventual bug/hang-up as the final cleanup
terminating the child processes will take care of that.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-10-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot and Eric reported a lockdep splat in the subflow diag:
WARNING: possible circular locking dependency detected
6.8.0-rc4-syzkaller-00212-g40b9385dd8e6 #0 Not tainted
syz-executor.2/24141 is trying to acquire lock:
ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at:
tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline]
ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at:
tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137
but task is already holding lock:
ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock
include/linux/spinlock.h:351 [inline]
ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at:
inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&h->lhash2[i].lock){+.+.}-{2:2}:
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
__inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743
inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261
__inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217
inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239
rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316
rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577
ops_init+0x352/0x610 net/core/net_namespace.c:136
__register_pernet_operations net/core/net_namespace.c:1214 [inline]
register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283
register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370
rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735
do_one_initcall+0x238/0x830 init/main.c:1236
do_initcall_level+0x157/0x210 init/main.c:1298
do_initcalls+0x3f/0x80 init/main.c:1314
kernel_init_freeable+0x42f/0x5d0 init/main.c:1551
kernel_init+0x1d/0x2a0 init/main.c:1441
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
-> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
lock_sock_fast include/net/sock.h:1723 [inline]
subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28
tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline]
tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137
inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345
inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061
__inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263
inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371
netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264
__netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:338 [inline]
inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405
sock_diag_rcv_msg+0xe7/0x410
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
As noted by Eric we can break the lock dependency chain avoid
dumping any extended info for the mptcp subflow listener:
nothing actually useful is presented there.
Fixes: b8adb69a7d29 ("mptcp: fix lockless access in subflow ULP diag")
Cc: stable@vger.kernel.org
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iJ=Oecw6OZDwmSYc9HJKQ_G32uN11L+oUcMu+TOD5Xiaw@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-9-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
when MPTCP server accepts an incoming connection, it clones its listener
socket. However, the pointer to 'inet_opt' for the new socket has the same
value as the original one: as a consequence, on program exit it's possible
to observe the following splat:
BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0
Free of addr ffff888485950880 by task swapper/25/0
CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609
Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013
Call Trace:
<IRQ>
dump_stack_lvl+0x32/0x50
print_report+0xca/0x620
kasan_report_invalid_free+0x64/0x90
__kasan_slab_free+0x1aa/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
rcu_do_batch+0x34e/0xd90
rcu_core+0x559/0xac0
__do_softirq+0x183/0x5a4
irq_exit_rcu+0x12d/0x170
sysvec_apic_timer_interrupt+0x6b/0x80
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x16/0x20
RIP: 0010:cpuidle_enter_state+0x175/0x300
Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b
RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202
RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000
RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588
RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080
R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0
R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80
cpuidle_enter+0x4a/0xa0
do_idle+0x310/0x410
cpu_startup_entry+0x51/0x60
start_secondary+0x211/0x270
secondary_startup_64_no_verify+0x184/0x18b
</TASK>
Allocated by task 6853:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0xa6/0xb0
__kmalloc+0x1eb/0x450
cipso_v4_sock_setattr+0x96/0x360
netlbl_sock_setattr+0x132/0x1f0
selinux_netlbl_socket_post_create+0x6c/0x110
selinux_socket_post_create+0x37b/0x7f0
security_socket_post_create+0x63/0xb0
__sock_create+0x305/0x450
__sys_socket_create.part.23+0xbd/0x130
__sys_socket+0x37/0xb0
__x64_sys_socket+0x6f/0xb0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 6858:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x12c/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
subflow_ulp_release+0x1f0/0x250
tcp_cleanup_ulp+0x6e/0x110
tcp_v4_destroy_sock+0x5a/0x3a0
inet_csk_destroy_sock+0x135/0x390
tcp_fin+0x416/0x5c0
tcp_data_queue+0x1bc8/0x4310
tcp_rcv_state_process+0x15a3/0x47b0
tcp_v4_do_rcv+0x2c1/0x990
tcp_v4_rcv+0x41fb/0x5ed0
ip_protocol_deliver_rcu+0x6d/0x9f0
ip_local_deliver_finish+0x278/0x360
ip_local_deliver+0x182/0x2c0
ip_rcv+0xb5/0x1c0
__netif_receive_skb_one_core+0x16e/0x1b0
process_backlog+0x1e3/0x650
__napi_poll+0xa6/0x500
net_rx_action+0x740/0xbb0
__do_softirq+0x183/0x5a4
The buggy address belongs to the object at ffff888485950880
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
64-byte region [ffff888485950880, ffff8884859508c0)
The buggy address belongs to the physical page:
page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950
flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006
raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc
Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix
this by duplicating IP / IPv6 options after clone, so that
ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice.
Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-8-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP
sockets. So it must be checked if ss tool supports MPTCP in this script.
Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-7-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the blamed commit below, the send buffer auto-tuning can
happen after that the mptcp_propagate_sndbuf() completes - via
the delegated action infrastructure.
We must check for write space even after such change or we risk
missing the wake-up event.
Fixes: 8005184fd1ca ("mptcp: refactor sndbuf auto-tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-6-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Such value should be inherited from the first subflow, but
passive sockets always used 'rsk_rcv_wnd'.
Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-5-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
when inserting not contiguous data in the subflow write queue,
the protocol creates a new skb and prevent the TCP stack from
merging it later with already queued skbs by setting the EOR marker.
Still no push flag is explicitly set at the end of previous GSO
packet, making the aggregation on the receiver side sub-optimal -
and packetdrill self-tests less predictable.
Explicitly mark the end of not contiguous DSS with the push flag.
Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-4-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the 'Fixes' commit mentioned below, the client side might print
the following warning once when a subflow is fully established at the
reception of any valid additional ack:
MPTCP: bogus mpc option on established client sk
That's a normal situation, and no warning should be printed for that. We
can then skip the check when the label is used.
Fixes: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-3-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now both a v4 address and a v4-mapped address are supported when
destroying a userspace pm subflow, this patch adds a second subflow
to "userspace pm add & remove address" test, and two subflows could
be removed two different ways, one with the v4mapped and one with v4.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-2-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
