summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-16net: dsa: rtl8365mb: add GMII as user port modeLuiz Angelo Daros de Luca
Recent net-next fails to initialize ports with: realtek-smi switch: phy mode gmii is unsupported on port 0 realtek-smi switch lan5 (uninitialized): validation of gmii with support 0000000,00000000,000062ef and advertisement 0000000,00000000,000062ef failed: -22 realtek-smi switch lan5 (uninitialized): failed to connect to PHY: -EINVAL realtek-smi switch lan5 (uninitialized): error -22 setting up PHY for tree 1, switch 0, port 0 Current net branch(3dd7d40b43663f58d11ee7a3d3798813b26a48f1) is not affected. I also noticed the same issue before with older versions but using a MDIO interface driver, not realtek-smi. Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: stmmac: dwmac-rk: fix oob read in rk_gmac_setupJohn Keeping
KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not. Fixes: 3bb3d6b1c195 ("net: stmmac: Add RK3566/RK3568 SoC support") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16Merge branch 'gve-improvements'David S. Miller
Jeroen de Borst says: ==================== gve improvements This patchset consists of unrelated changes: A bug fix for an issue that disabled jumbo-frame support, a few code improvements and minor funcitonal changes and 3 new features: Supporting tx|rx-coalesce-usec for DQO Suspend/resume/shutdown Optional metadata descriptors ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16gve: Add tx|rx-coalesce-usec for DQOTao Liu
Adding ethtool support for changing rx-coalesce-usec and tx-coalesce-usec when using the DQO queue format. Signed-off-by: Tao Liu <xliutaox@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16gve: Add consumed counts to ethtool statsJordan Kim
Being able to see how many descriptors are in-use is helpful when diagnosing certain issues. Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: Jordan Kim <jrkim@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16gve: Implement suspend/resume/shutdownCatherine Sullivan
Add support for suspend, resume and shutdown. Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16gve: Add optional metadata descriptor type GVE_TXD_MTDWillem de Bruijn
Allow drivers to pass metadata along with packet data to the device. Introduce a new metadata descriptor type * GVE_TXD_MTD This descriptor is optional. If present it immediate follows the packet descriptor and precedes the segment descriptor. This descriptor may be repeated. Multiple metadata descriptors may follow. There are no immediate uses for this, this is for future proofing. At present devices allow only 1 MTD descriptor. The lower four bits of the type_flags field encode GVE_TXD_MTD. The upper four bits of the type_flags field encodes a *sub*type. Introduce one such metadata descriptor subtype * GVE_MTD_SUBTYPE_PATH This shares path information with the device for network failure discovery and robust response: Linux derives ipv6 flowlabel and ECMP multipath from sk->sk_txhash, and updates this field on error with sk_rethink_txhash. Allow the host stack to do the same. Pass the tx_hash value if set. Also communicate whether the path hash is set, or more exactly, what its type is. Define two common types GVE_MTD_PATH_HASH_NONE GVE_MTD_PATH_HASH_L4 Concrete examples of error conditions that are resolved are mentioned in the commits that add sk_rethink_txhash calls. Such as commit 7788174e8726 ("tcp: change IPv6 flow-label upon receiving spurious retransmission"). Experimental results mirror what the theory suggests: where IPv6 FlowLabel is included in path selection (e.g., LAG/ECMP), flowlabel rotation on TCP timeout avoids the vast majority of TCP disconnects that would otherwise have occurred during link failures in long-haul backbones, when an alternative path is available. Rotation can be applied to various bad connection signals, such as timeouts and spurious retransmissions. In aggregate, such flow level signals can help locate network issues. Define initial common states: GVE_MTD_PATH_STATE_DEFAULT GVE_MTD_PATH_STATE_TIMEOUT GVE_MTD_PATH_STATE_CONGESTION GVE_MTD_PATH_STATE_RETRANSMIT Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16gve: remove memory barrier around seqnoCatherine Sullivan
No longer needed after we introduced the barrier in gve_napi_poll. Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16gve: Update gve_free_queue_page_list signatureCatherine Sullivan
The id field should be a u32 not a signed int. Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16gve: Move the irq db indexes out of the ntfy block structCatherine Sullivan
Giving the device access to other kernel structs is not ideal. Move the indexes into their own array and just keep pointers to them in the ntfy block struct. Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16gve: Correct order of processing device optionsJeroen de Borst
The legacy raw addressing device option was processed before the new RDA queue format option. This caused the supported features mask, which is provided only on the RDA queue format option, not to be set. This disabled jumbo-frame support when using raw adressing. Fixes: 255489f5b33c ("gve: Add a jumbo-frame device option") Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16Merge branch 'phylink-pcs-validation'David S. Miller
Russell King says: ==================== net: phylink: add PCS validation This series allows phylink to include the PCS in its validation step. There are two reasons to make this change: 1. Some of the network drivers that are making use of the split PCS support are already manually calling into their PCS drivers to perform validation. E.g. stmmac with xpcs. 2. Logically, some network drivers such as mvneta and mvpp2, the restriction we impose in the validate() callback is a property of the "PCS" block that we provide rather than the MAC. This series: 1. Gives phylink a mechanism to query the MAC driver which PCS is wishes to use for the PHY interface mode. This is necessary to allow the PCS to be involved in the validation step without making changes to the configuration. 2. Provide a pcs_validate() method that PCS can implement. This follows a similar model to the MAC's validate() callback, but with some minor differences due to observations from the various implementations. E.g. returning an error code for not-supported and the way the advertising bitmap is masked. 3. Convert mvpp2 and mvneta to this as examples of its use. Further Conversions are in the pipeline, including for stmmac+xpcs, as well as some DSA drivers. Note that DSA conversion to this is conditional upon all DSA drivers populating their supported_interfaces bitmap, since this is required before mac_select_pcs() can be used. Existing drivers that set a PCS in mac_prepare() or mac_config(), or shortly after phylink_create() will continue to work. However, it should be noted that mac_select_pcs() will be called during phylink_create(), and thus any PCS returned by mac_select_pcs() must be available by this time - or we drop the check in phylink_create(). v2: fix kerneldoc typo in patch 1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: mvneta: convert to pcs_validate() and phylink_generic_validate()Russell King (Oracle)
Convert mvneta to validate the autoneg state for 1000base-X in the pcs_validate() operation, rather than the MAC validate() operation. This allows us to switch the MAC validate() to use phylink_generic_validate(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: mvneta: convert to phylink pcs operationsRussell King
An initial stab at converting mvneta to PCS operations. There's a few FIXMEs to be solved. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: mvneta: convert to use mac_prepare()/mac_finish()Russell King
Convert mvneta to use the mac_prepare() and mac_finish() methods in preparation to converting mvneta to split-PCS support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: mvpp2: convert to pcs_validate() and phylink_generic_validate()Russell King (Oracle)
Convert mvpp2 to validate the autoneg state for 1000base-X in the pcs_validate() operation, rather than the MAC validate() operation. This allows us to switch the MAC validate() to use phylink_generic_validate(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: mvpp2: use .mac_select_pcs() interfaceRussell King (Oracle)
Use the mac_select_pcs() method to choose between the GMAC and XLG PCS implementations. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: phylink: add pcs_validate() methodRussell King (Oracle)
Add a hook for PCS to validate the link parameters. This avoids MAC drivers having to have knowledge of their PCS in their validate() method, thereby allowing several MAC drivers to be simplfied. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: phylink: add mac_select_pcs() method to phylink_mac_opsRussell King (Oracle)
mac_select_pcs() allows us to have an explicit point to query which PCS the MAC wishes to use for a particular PHY interface mode, thereby allowing us to add support to validate the link settings with the PCS. Phylink will also use this to select the PCS to be used during a major configuration event without the MAC driver needing to call phylink_set_pcs(). Note that if mac_select_pcs() is present, the supported_interfaces bitmap must be filled in; this avoids mac_select_pcs() being called with PHY_INTERFACE_MODE_NA when we want to get support for all interface types. Phylink will return an error in phylink_create() unless this condition is satisfied. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-15 This series contains updates to igb, igbvf, igc and ixgbe drivers. Karen moves checks for invalid VF MAC filters to occur earlier for igb. Letu Ren fixes a double free issue in igbvf probe. Sasha fixes incorrect min value being used when calculating for max for igc. Robert Schlabbach adds documentation on enabling NBASE-T support for ixgbe. Cyril Novikov adds missing initialization of MDIO bus speed for ixgbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller
t-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-12-15 This series contains updates to ice driver only. Jake makes changes to flash update. This includes the following: * a new shadow-ram region similar to NVM region but for the device shadow RAM contents. This is distinct from NVM region because shadow RAM is built up during device init and may be different from the raw NVM flash data. * refactoring of the ice_flash_pldm_image to become the main flash update entry point. This is simpler than having both an ice_devlink_flash_update and an ice_flash_pldm_image. It will make additions like dry-run easier in the future. * reducing time to read Option ROM version information. * adding support for firmware activation via devlink reload, when possible. The major new work is the reload support, which allows activating firmware immediately without a reboot when possible. Reload support only supports firmware activation. Jesse improves transmit code: utilizing newer netif_tx* API, adding some prefetch calls, correcting expected conditions when calling ice_vsi_down(), and utilizing __netdev_tx_sent_queue() call. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16drm/vc4: plane: Add support for YUV color encodings and rangesDave Stevenson
The BT601/BT709 color encoding and limited vs full range properties were not being exposed, defaulting always to BT601 limited range. Expose the parameters and set the registers appropriately. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20211215091739.135042-4-maxime@cerno.tech
2021-12-16drm/vc4: plane: Add support for DRM_FORMAT_P030Dave Stevenson
The P030 format, used with the DRM_FORMAT_MOD_BROADCOM_SAND128 modifier, is a format output by the video decoder on the BCM2711. Add native support to the KMS planes for that format. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20211215091739.135042-3-maxime@cerno.tech
2021-12-16drm/fourcc: Add packed 10bit YUV 4:2:0 formatDave Stevenson
Adds a format that is 3 10bit YUV 4:2:0 samples packed into a 32bit word (with 2 spare bits). Supported on Broadcom BCM2711 chips. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20211215091739.135042-2-maxime@cerno.tech
2021-12-16Merge branch 'mlx5-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== mlx5-next branch 2021-12-15 Hi Dave, Jakub, Jason This pulls mlx5-next branch into net-next and rdma branches. All patches already reviewed on both rdma and netdev mailing lists. Please pull and let me know if there's any problem. 1) Add multiple FDB steering priorities [1] 2) Introduce HW bits needed to configure MAC list size of VF/SF. Required for ("net/mlx5: Memory optimizations") upcoming series [2]. [1] https://lore.kernel.org/netdev/20211201193621.9129-1-saeed@kernel.org/ [2] https://lore.kernel.org/lkml/20211208141722.13646-1-shayd@nvidia.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16arm64: dts: imx8mp-evk: configure multiple queues on eqosXiaoliang Yang
Eqos ethernet support five queues on hardware, enable these queues and configure the priority of each queue. Uses Strict Priority as scheduling algorithms to ensure that the TSN function works. The priority of each queue is a bitmask value that maps VLAN tag priority to the queue. Since the hardware only supports five queues, this patch maps priority 0-4 to queues one by one, and priority 5-7 to queue 4. The total fifo size of 5 queues is 8192 bytes, if enable 5 queues with store-and-forward mode, it's not enough for large packets, which would trigger fifo overflow frequently. This patch set DMA to thresh mode to enable all 5 queues. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapterYunus Bas
The PEB-AV-02 expansion adapter extends the phyBOARD-Mira boards to connect parallel LCD displays, either with capacitive or resistive touch. Signed-off-by: Yunus Bas <y.bas@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 boardYunus Bas
The PHYTEC PEV-EVAL-01 expansion board adds support for additional gpio-triggered user-leds and gpio-key support. Signed-off-by: Yunus Bas <y.bas@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16drm/simpledrm: Add [AX]RGB2101010 formatsHector Martin
This is the format used by the bootloader framebuffer on Apple ARM64 platforms. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211212062407.138309-4-marcan@marcan.st
2021-12-16drm/format-helper: Add drm_fb_xrgb8888_to_xrgb2101010_toio()Hector Martin
Add XRGB8888 emulation support for devices that can only do XRGB2101010. This is chiefly useful for simpledrm on Apple devices where the bootloader-provided framebuffer is 10-bit. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211212062407.138309-3-marcan@marcan.st
2021-12-16arm64: dts: ls1028a-qds: add overlays for various serdes protocolsAlex Marginean
Add overlays for various serdes protocols on LS1028A QDS board using different PHY cards. These should be applied at boot, based on serdes configuration. If no overlay is applied, only the RGMII interface on the QDS is available in Linux. Building device tree fragments requires passing the "-@" argument to dtc, which increases the base dtb size and might cause some platforms to fail to store the new binary. To avoid that, it would be nice to only pass "-@" for the platforms where fragments will be used, aka LS1028A-QDS. One approach suggested by Rob Herring is used here: https://lore.kernel.org/patchwork/patch/821645/ Also moved the enet* override nodes in dts file to be in alphabetic order. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: ls1028a-qds: enable lpuart1Vabhav Sharma
LPUART nodes by default are disabled in LS1028A device tree, Enabling LPUART1 node. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: ls1028a-qds: move rtc node to the correct i2c busBiwen Li
The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Li Yang <leoyang.lil@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: ls1028a-rdb: enable pwm0Biwen Li
Enable pwm0 on ls1028a-rdb board which uses flextimer1. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: ls1028a: add flextimer based pwm nodesBiwen Li
Add pwm nodes using flextimer controller. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup sourceBiwen Li
Add flextimer2 based ftm_alarm1 node and enable it to be the default rtc wakeup source for rdb and qds boards instead of the original flextimer1 which is used by PWM. The ftm_alarm0 node hence is disabled by default. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: ls1028a: Add PCIe EP nodesXiaowei Bao
Add PCIe EP nodes for ls1028a to support EP mode. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16of: Move simple-framebuffer device handling from simplefb to ofHector Martin
This code is required for both simplefb and simpledrm, so let's move it into the OF core instead of having it as an ad-hoc initcall in the drivers. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211212062407.138309-2-marcan@marcan.st
2021-12-16ARM: dts: imx6qdl-dhcom: Add USB overcurrent pin on SoM layerChristoph Niedermaier
Add USB overcurrent pin muxing on SoM layer. On DRC02 and PDK2 the USB overcurrent pin isn't connected, but a USB hub on the board takes care of the USB overcurrent instead. Therefore disable it there with the property disable-over-current. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: lx2162a-qds: add interrupt line for RTC nodeBiwen Li
Add interrupt line for RTC node on lx2162a-qds Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modesYangbo Lu
The default NXP SDHC adapter cards for LX2162AQDS are SD 2.0/3.0 adapter card for eSDHC1, and eMMC 5.1 adapter card for eSDHC2. Add speed modes properties supported by the two adapters in device tree node. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodesRan Wang
Enable USB3 HW LPM feature for lx2160a. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: lx2160a-qds: Add mdio mux nodesPankaj Bansal
The two external MDIO buses used to communicate with phy devices that are external to SOC are muxed in LX2160AQDS board. These buses can be routed to any one of the eight IO slots on LX2160AQDS board depending on value in fpga register 0x54. Additionally the external MDIO1 is used to communicate to the onboard RGMII phy devices. The mdio1 is controlled by bits 4-7 of fpga register and mdio2 is controlled by bits 4-7 of fpga register. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: lx2160a: add optee-tz nodePankaj Gupta
Disabled by default in SoC dtsi and enables in board dts files. Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: lx2160a-rdb: Add Inphi PHY nodeIoana Radulescu
DPMAC5 and DPMAC6 are connected to 25G Inphi PHY Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com> Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: lx2160a: fix scl-gpios property nameZhang Ying-22455
Fix the typo in the property name. Fixes: d548c217c6a3c ("arm64: dts: add QorIQ LX2160A SoC support") Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16drm/panel: simple: Add Team Source Display TST043015CMHX panelMarek Vasut
Add Team Source Display TST043015CMHX 4.3" 480x272 DPI panel support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211127031909.283383-3-marex@denx.de
2021-12-16dt-bindings: display: simple: Add Team Source Display TST043015CMHX panelMarek Vasut
Add Team Source Display TST043015CMHX 4.3" 480x272 DPI panel compatible string. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211127031909.283383-2-marex@denx.de
2021-12-16dt-bindings: Add Team Source Display Technology vendor prefixMarek Vasut
Add vendor prefix for Team Source Display Technology Co., Ltd. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211127031909.283383-1-marex@denx.de
2021-12-16drm/bridge: lvds-codec: Add support for pixel data sampling edge selectMarek Vasut
The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to select input pixel data sampling edge. Add DT property "pclk-sample", not the same as the one used by display timings but rather the same as used by media, and configure bus flags based on this DT property. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211017001204.299940-2-marex@denx.de
generated by cgit (git 2.34.1) at 2025-09-23 09:27:52 +0000