summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-20tools/power turbostat: Fix gcc build warningsLen Brown
Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size [-Wstringop-truncation] reduce param to strncpy, to guarantee that a null byte is always copied into destination buffer. Signed-off-by: Len Brown <len.brown@intel.com>
2020-03-20tools/power turbostat: Support CometlakeChen Yu
From a turbostat point of view, Cometlake is like Kabylake. Suggested-by: Rui Zhang <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2020-03-19cxgb4: fix Txq restart check during backpressureRahul Lakkireddy
Driver reclaims descriptors in much smaller batches, even if hardware indicates more to reclaim, during backpressure. So, fix the check to restart the Txq during backpressure, by looking at how many descriptors hardware had indicated to reclaim, and not on how many descriptors that driver had actually reclaimed. Once the Txq is restarted, driver will reclaim even more descriptors when Tx path is entered again. Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19cxgb4: fix throughput drop during Tx backpressureRahul Lakkireddy
commit 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") reverted back to getting Tx CIDX updates via DMA, instead of interrupts, introduced by commit d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") However, it missed reverting back several code changes where Tx CIDX updates are not explicitly requested during backpressure when using interrupt mode. These missed changes cause slow recovery during backpressure because the corresponding interrupt no longer comes and hence results in Tx throughput drop. So, revert back these missed code changes, as well, which will allow explicitly requesting Tx CIDX updates when backpressure happens. This enables the corresponding interrupt with Tx CIDX update message to get generated and hence speed up recovery and restore back throughput. Fixes: 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19Merge branch 'veth-xdp-stats'David S. Miller
Lorenzo Bianconi says: ==================== add more xdp stats to veth driver Align veth xdp stats accounting to mellanox, intel and marvell implementation. Introduce the following xdp counters: - rx_xdp_tx - rx_xdp_tx_errors - tx_xdp_xmit - tx_xdp_xmit_errors - rx_xdp_redirect ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: remove atomic64_add from veth_xdp_xmit hotpathLorenzo Bianconi
Remove atomic64_add from veth_xdp_xmit hotpath and rely on xdp_xmit_err/xdp_tx_err counters Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: introduce more xdp countersLorenzo Bianconi
Introduce xdp_xmit counter in order to distinguish between XDP_TX and ndo_xdp_xmit stats. Introduce the following ethtool counters: - rx_xdp_tx - rx_xdp_tx_errors - tx_xdp_xmit - tx_xdp_xmit_errors - rx_xdp_redirect Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: distinguish between rx_drops and xdp_dropsLorenzo Bianconi
Distinguish between rx_drops and xdp_drops since the latter is already reported in rx_packets. Report xdp_drops in ethtool statistics Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: introduce more specialized counters in veth_statsLorenzo Bianconi
Introduce xdp_tx, xdp_redirect and rx_drops counters in veth_stats data structure. Move stats accounting in veth_poll. Remove xdp_xmit variable in veth_xdp_rcv_one/veth_xdp_rcv_skb and rely on veth_stats counters. This is a preliminary patch to align veth xdp statistics to mlx, intel and marvell xdp implementation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: move xdp stats in a dedicated structureLorenzo Bianconi
Move xdp stats in veth_stats data structure. This is a preliminary patch to align xdp statistics to mlx5, ixgbe and mvneta drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19sysfs: fix static inline declaration of sysfs_groups_change_owner()Christian Brauner
The CONFIG_SYSFS declaration of sysfs_group_change_owner() is different from the !CONFIG_SYSFS version and thus causes build failurs when !CONFIG_SYSFS is set. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 303a42769c4c ("sysfs: add sysfs_group{s}_change_owner()") Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19Merge branch 'mscc-RGMII'David S. Miller
Antoine Tenart says: ==================== net: phy: mscc: add support for RGMII MAC mode This series adds support for the RGMII MAC mode for the VSC8584 PHY family and for RGMII_ID modes (Tx and/or Rx). I decided to drop the custom delay for now. I made some tests and it seemed to be working quite well. If we find out we really need to lower the delay, which I doubt, I'll send support for it. Since v2: - Dropped support for custom dt bindings. - Add the 2ns delay based on the interface mode. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: RGMII skew delay configurationAntoine Tenart
This patch adds support for configuring the RGMII skew delays in Rx and Tx. The Rx and Tx skews are set based on the interface mode. By default their configuration is set to the default value in hardware (0.2ns); this means the driver do not rely anymore on the bootloader configuration. Then based on the interface mode being used, a 2ns delay is added: - RGMII_ID adds it for both Rx and Tx. - RGMII_RXID adds it for Rx. - RGMII_TXID adds it for Tx. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add support for RGMII MAC modeAntoine Tenart
This patch adds support for connecting VSC8584 PHYs to the MAC using RGMII. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: dsa: mt7530: Change the LINK bit to reflect the link statusRené van Dorst
Andrew reported: After a number of network port link up/down changes, sometimes the switch port gets stuck in a state where it thinks it is still transmitting packets but the cpu port is not actually transmitting anymore. In this state you will see a message on the console "mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter in ifconfig will be incrementing on virtual port, but not incrementing on cpu port. The issue is that MAC TX/RX status has no impact on the link status or queue manager of the switch. So the queue manager just queues up packets of a disabled port and sends out pause frames when the queue is full. Change the LINK bit to reflect the link status. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reported-by: Andrew Smith <andrew.smith@digi.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19Merge branch 'mlxsw-Offload-TC-action-skbedit-priority'David S. Miller
Ido Schimmel says: ==================== mlxsw: Offload TC action skbedit priority Petr says: The TC action "skbedit priority P" has the effect of assigning skbprio of P to SKBs that it's applied on. In HW datapath of a switch, the corresponding action is assignment of internal switch priority. Spectrum switches allow setting of packet priority based on an ACL action, which is good match for the skbedit priority gadget. This patchset therefore implements offloading of this action to the Spectrum ACL engine. After a bit of refactoring in patch #1, patch #2 extends the skbedit action to support offloading of "priority" subcommand. On mlxsw side, in patch #3, the QOS_ACTION flexible action is added, with fields necessary for priority adjustment. In patch #4, "skbedit priority" is connected to that action. Patch #5 implements a new forwarding selftest, suitable for both SW- and HW-datapath testing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19selftests: forwarding: Add an skbedit priority selftestPetr Machata
Add a test that runs traffic through a port such that skbedit priority action acts on it during forwarding. Test that at egress, it is classified correctly according to the new priority at a PRIO qdisc. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: spectrum_flower: Offload FLOW_ACTION_PRIORITYPetr Machata
Offload action skbedit priority when keyed to a flower classifier. The skb->priority field in Linux is very generic, so only allow setting the bottom 8 priorities and bounce anything else. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: core: Add QOS_ACTIONPetr Machata
The QOS_ACTION is used for manipulating the QoS attributes of a packet. Add the corresponding defines and helpers, in particular for the switch_priority override. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: tc_skbedit: Make the skbedit priority offloadablePetr Machata
The skbedit action "priority" is used for adjusting SKB priority. Allow drivers to offload the action by introducing two new skbedit getters and a new flow action, and initializing appropriately in tc_setup_flow_action(). Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: tc_skbedit: Factor a helper out of is_tcf_skbedit_{mark, ptype}()Petr Machata
The two functions is_tcf_skbedit_mark() and is_tcf_skbedit_ptype() have a very similar structure. A follow-up patch will add one more such function. Instead of more cut'n'pasting, extract a helper function that checks whether a TC action is an skbedit with the required flag. Convert the two existing functions into thin wrappers around the helper. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: stmmac: dwmac_lib: remove unnecessary checks in dwmac_dma_reset()Dejin Zheng
it will check the return value of dwmac_dma_reset() in the stmmac_init_dma_engine() function and report an error if the return value is not zero. so don't need check here. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add missing check on a phy_write return valueAntoine Tenart
Commit a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") introduced a call to 'phy_write' storing its return value to a variable called 'ret'. But 'ret' never was checked for a possible error being returned, and hence was not used at all. Fix this by checking the return value and exiting the function if an error was returned. As this does not fix a known bug, this commit is mostly cosmetic and not sent as a fix. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: ipa: Remove unused including <linux/version.h>YueHaibing
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: ipa: fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19liquidio: remove set but not used variable 's'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'octeon_chip_specific_setup': drivers/net/ethernet/cavium/liquidio/lio_main.c:1378:8: warning: variable 's' set but not used [-Wunused-but-set-variable] It's not used since commit b6334be64d6f ("net/liquidio: Delete driver version assignment") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-20crypto: arm64/chacha - correctly walk through blocksJason A. Donenfeld
Prior, passing in chunks of 2, 3, or 4, followed by any additional chunks would result in the chacha state counter getting out of sync, resulting in incorrect encryption/decryption, which is a pretty nasty crypto vuln: "why do images look weird on webpages?" WireGuard users never experienced this prior, because we have always, out of tree, used a different crypto library, until the recent Frankenzinc addition. This commit fixes the issue by advancing the pointers and state counter by the actual size processed. It also fixes up a bug in the (optional, costly) stride test that prevented it from running on arm64. Fixes: b3aad5bad26a ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function") Reported-and-tested-by: Emil Renner Berthing <kernel@esmil.dk> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-19Merge tag 'rxrpc-fixes-20200319' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc, afs: Interruptibility fixes Here are a number of fixes for AF_RXRPC and AFS that make AFS system calls less interruptible and so less likely to leave the filesystem in an uncertain state. There's also a miscellaneous patch to make tracing consistent. (1) Firstly, abstract out the Tx space calculation in sendmsg. Much the same code is replicated in a number of places that subsequent patches are going to alter, including adding another copy. (2) Fix Tx interruptibility by allowing a kernel service, such as AFS, to request that a call be interruptible only when waiting for a call slot to become available (ie. the call has not taken place yet) or that a call be not interruptible at all (e.g. when we want to do writeback and don't want a signal interrupting a VM-induced writeback). (3) Increase the minimum delay on MSG_WAITALL for userspace sendmsg() when waiting for Tx buffer space as a 2*RTT delay is really small over 10G ethernet and a 1 jiffy timeout might be essentially 0 if at the end of the jiffy period. (4) Fix some tracing output in AFS to make it consistent with rxrpc. (5) Make sure aborted asynchronous AFS operations are tidied up properly so we don't end up with stuck rxrpc calls. (6) Make AFS client calls uninterruptible in the Rx phase. If we don't wait for the reply to be fully gathered, we can't update the local VFS state and we end up in an indeterminate state with respect to the server. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: sched: Do not assume RTNL is held in tunnel key action helpersIdo Schimmel
The cited commit removed RTNL from tc_setup_flow_action(), but the function calls two tunnel key action helpers that use rtnl_dereference() to fetch the action's parameters. This leads to "suspicious RCU usage" warnings [1][2]. Change the helpers to use rcu_dereference_protected() while requiring the action's lock to be held. This is safe because the two helpers are only called from tc_setup_flow_action() which acquires the lock. [1] [ 156.950855] ============================= [ 156.955463] WARNING: suspicious RCU usage [ 156.960085] 5.6.0-rc5-custom-47426-gdfe43878d573 #2409 Not tainted [ 156.967116] ----------------------------- [ 156.971728] include/net/tc_act/tc_tunnel_key.h:31 suspicious rcu_dereference_protected() usage! [ 156.981583] [ 156.981583] other info that might help us debug this: [ 156.981583] [ 156.990675] [ 156.990675] rcu_scheduler_active = 2, debug_locks = 1 [ 156.998205] 1 lock held by tc/877: [ 157.002187] #0: ffff8881cbf7bea0 (&(&p->tcfa_lock)->rlock){+...}, at: tc_setup_flow_action+0xbe/0x4f78 [ 157.012866] [ 157.012866] stack backtrace: [ 157.017886] CPU: 2 PID: 877 Comm: tc Not tainted 5.6.0-rc5-custom-47426-gdfe43878d573 #2409 [ 157.027253] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 157.037389] Call Trace: [ 157.040170] dump_stack+0xfd/0x178 [ 157.044034] lockdep_rcu_suspicious+0x14a/0x153 [ 157.049157] tc_setup_flow_action+0x89f/0x4f78 [ 157.054227] fl_hw_replace_filter+0x375/0x640 [ 157.064348] fl_change+0x28ec/0x4f6b [ 157.088843] tc_new_tfilter+0x15e2/0x2260 [ 157.176801] rtnetlink_rcv_msg+0x8d6/0xb60 [ 157.190915] netlink_rcv_skb+0x177/0x460 [ 157.208884] rtnetlink_rcv+0x21/0x30 [ 157.212925] netlink_unicast+0x5d0/0x7f0 [ 157.227728] netlink_sendmsg+0x981/0xe90 [ 157.245416] ____sys_sendmsg+0x76d/0x8f0 [ 157.255348] ___sys_sendmsg+0x10f/0x190 [ 157.320308] __sys_sendmsg+0x115/0x1f0 [ 157.342553] __x64_sys_sendmsg+0x7d/0xc0 [ 157.346987] do_syscall_64+0xc1/0x600 [ 157.351142] entry_SYSCALL_64_after_hwframe+0x49/0xbe [2] [ 157.432346] ============================= [ 157.436937] WARNING: suspicious RCU usage [ 157.441537] 5.6.0-rc5-custom-47426-gdfe43878d573 #2409 Not tainted [ 157.448559] ----------------------------- [ 157.453204] include/net/tc_act/tc_tunnel_key.h:43 suspicious rcu_dereference_protected() usage! [ 157.463042] [ 157.463042] other info that might help us debug this: [ 157.463042] [ 157.472112] [ 157.472112] rcu_scheduler_active = 2, debug_locks = 1 [ 157.479529] 1 lock held by tc/877: [ 157.483442] #0: ffff8881cbf7bea0 (&(&p->tcfa_lock)->rlock){+...}, at: tc_setup_flow_action+0xbe/0x4f78 [ 157.494119] [ 157.494119] stack backtrace: [ 157.499114] CPU: 2 PID: 877 Comm: tc Not tainted 5.6.0-rc5-custom-47426-gdfe43878d573 #2409 [ 157.508485] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 157.518628] Call Trace: [ 157.521416] dump_stack+0xfd/0x178 [ 157.525293] lockdep_rcu_suspicious+0x14a/0x153 [ 157.530425] tc_setup_flow_action+0x993/0x4f78 [ 157.535505] fl_hw_replace_filter+0x375/0x640 [ 157.545650] fl_change+0x28ec/0x4f6b [ 157.570204] tc_new_tfilter+0x15e2/0x2260 [ 157.658199] rtnetlink_rcv_msg+0x8d6/0xb60 [ 157.672315] netlink_rcv_skb+0x177/0x460 [ 157.690278] rtnetlink_rcv+0x21/0x30 [ 157.694320] netlink_unicast+0x5d0/0x7f0 [ 157.709129] netlink_sendmsg+0x981/0xe90 [ 157.726813] ____sys_sendmsg+0x76d/0x8f0 [ 157.736725] ___sys_sendmsg+0x10f/0x190 [ 157.801721] __sys_sendmsg+0x115/0x1f0 [ 157.823967] __x64_sys_sendmsg+0x7d/0xc0 [ 157.828403] do_syscall_64+0xc1/0x600 [ 157.832558] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: b15e7a6e8d31 ("net: sched: don't take rtnl lock during flow_action setup") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: pci: Only issue reset when system is readyIdo Schimmel
During initialization the driver issues a software reset command and then waits for the system status to change back to "ready" state. However, before issuing the reset command the driver does not check that the system is actually in "ready" state. On Spectrum-{1,2} systems this was always the case as the hardware initialization time is very short. On Spectrum-3 systems this is no longer the case. This results in the software reset command timing-out and the driver failing to load: [ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0) [ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write) [ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device [ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110 Fix this by waiting for the system to become ready both before issuing the reset command and afterwards. In case of failure, print the last system status to aid in debugging. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: bridge: vlan: include stats in dumps if requestedNikolay Aleksandrov
This patch adds support for vlan stats to be included when dumping vlan information. We have to dump them only when explicitly requested (thus the flag below) because that disables the vlan range compression and will make the dump significantly larger. In order to request the stats to be included we add a new dump attribute called BRIDGE_VLANDB_DUMP_FLAGS which can affect dumps with the following first flag: - BRIDGE_VLANDB_DUMPF_STATS The stats are intentionally nested and put into separate attributes to make it easier for extending later since we plan to add per-vlan mcast stats, drop stats and possibly STP stats. This is the last missing piece from the new vlan API which makes the dumped vlan information complete. A dump request which should include stats looks like: [BRIDGE_VLANDB_DUMP_FLAGS] |= BRIDGE_VLANDB_DUMPF_STATS A vlandb entry attribute with stats looks like: [BRIDGE_VLANDB_ENTRY] = { [BRIDGE_VLANDB_ENTRY_STATS] = { [BRIDGE_VLANDB_STATS_RX_BYTES] [BRIDGE_VLANDB_STATS_RX_PACKETS] ... } } Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mptcp: rename fourth ack fieldPaolo Abeni
The name is misleading, it actually tracks the 'fully established' status. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-20Merge tag 'drm-intel-fixes-2020-03-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc7: - Track active elements during dequeue - Fix failure to handle all MCR ranges - Revert unnecessary workaround Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/877dzgepvu.fsf@intel.com
2020-03-20Merge tag 'amd-drm-fixes-5.6-2020-03-19' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-19: amdgpu: - Pageflip fix - VCN clockgating fixes - GPR debugfs fix for umr - GPU reset fix - eDP fix for MBP - DCN2.x fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200319204054.1036478-1-alexander.deucher@amd.com
2020-03-20KVM: PPC: Fix kernel crash with PR KVMGreg Kurz
With PR KVM, shutting down a VM causes the host kernel to crash: [ 314.219284] BUG: Unable to handle kernel data access on read at 0xc00800000176c638 [ 314.219299] Faulting instruction address: 0xc008000000d4ddb0 cpu 0x0: Vector: 300 (Data Access) at [c00000036da077a0] pc: c008000000d4ddb0: kvmppc_mmu_pte_flush_all+0x68/0xd0 [kvm_pr] lr: c008000000d4dd94: kvmppc_mmu_pte_flush_all+0x4c/0xd0 [kvm_pr] sp: c00000036da07a30 msr: 900000010280b033 dar: c00800000176c638 dsisr: 40000000 current = 0xc00000036d4c0000 paca = 0xc000000001a00000 irqmask: 0x03 irq_happened: 0x01 pid = 1992, comm = qemu-system-ppc Linux version 5.6.0-master-gku+ (greg@palmb) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #17 SMP Wed Mar 18 13:49:29 CET 2020 enter ? for help [c00000036da07ab0] c008000000d4fbe0 kvmppc_mmu_destroy_pr+0x28/0x60 [kvm_pr] [c00000036da07ae0] c0080000009eab8c kvmppc_mmu_destroy+0x34/0x50 [kvm] [c00000036da07b00] c0080000009e50c0 kvm_arch_vcpu_destroy+0x108/0x140 [kvm] [c00000036da07b30] c0080000009d1b50 kvm_vcpu_destroy+0x28/0x80 [kvm] [c00000036da07b60] c0080000009e4434 kvm_arch_destroy_vm+0xbc/0x190 [kvm] [c00000036da07ba0] c0080000009d9c2c kvm_put_kvm+0x1d4/0x3f0 [kvm] [c00000036da07c00] c0080000009da760 kvm_vm_release+0x38/0x60 [kvm] [c00000036da07c30] c000000000420be0 __fput+0xe0/0x310 [c00000036da07c90] c0000000001747a0 task_work_run+0x150/0x1c0 [c00000036da07cf0] c00000000014896c do_exit+0x44c/0xd00 [c00000036da07dc0] c0000000001492f4 do_group_exit+0x64/0xd0 [c00000036da07e00] c000000000149384 sys_exit_group+0x24/0x30 [c00000036da07e20] c00000000000b9d0 system_call+0x5c/0x68 This is caused by a use-after-free in kvmppc_mmu_pte_flush_all() which dereferences vcpu->arch.book3s which was previously freed by kvmppc_core_vcpu_free_pr(). This happens because kvmppc_mmu_destroy() is called after kvmppc_core_vcpu_free() since commit ff030fdf5573 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code"). The kvmppc_mmu_destroy() helper calls one of the following depending on the KVM backend: - kvmppc_mmu_destroy_hv() which does nothing (Book3s HV) - kvmppc_mmu_destroy_pr() which undoes the effects of kvmppc_mmu_init() (Book3s PR 32-bit) - kvmppc_mmu_destroy_pr() which undoes the effects of kvmppc_mmu_init() (Book3s PR 64-bit) - kvmppc_mmu_destroy_e500() which does nothing (BookE e500/e500mc) It turns out that this is only relevant to PR KVM actually. And both 32 and 64 backends need vcpu->arch.book3s to be valid when calling kvmppc_mmu_destroy_pr(). So instead of calling kvmppc_mmu_destroy() from kvm_arch_vcpu_destroy(), call kvmppc_mmu_destroy_pr() at the beginning of kvmppc_core_vcpu_free_pr(). This is consistent with kvmppc_mmu_init() being the last call in kvmppc_core_vcpu_create_pr(). For the same reason, if kvmppc_core_vcpu_create_pr() returns an error then this means that kvmppc_mmu_init() was either not called or failed, in which case kvmppc_mmu_destroy() should not be called. Drop the line in the error path of kvm_arch_vcpu_create(). Fixes: ff030fdf5573 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code") Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/158455341029.178873.15248663726399374882.stgit@bahia.lan
2020-03-19netfilter: flowtable: populate addr_type maskEdward Cree
nf_flow_rule_match() sets control.addr_type in key, so needs to also set the corresponding mask. An exact match is wanted, so mask is all ones. Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-19drm/amd/display: Fix pageflip event race condition for DCN.Mario Kleiner
Commit '16f17eda8bad ("drm/amd/display: Send vblank and user events at vsartup for DCN")' introduces a new way of pageflip completion handling for DCN, and some trouble. The current implementation introduces a race condition, which can cause pageflip completion events to be sent out one vblank too early, thereby confusing userspace and causing flicker: prepare_flip_isr(): 1. Pageflip programming takes the ddev->event_lock. 2. Sets acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED 3. Releases ddev->event_lock. --> Deadline for surface address regs double-buffering passes on target pipe. 4. dc_commit_updates_for_stream() MMIO programs the new pageflip into hw, but too late for current vblank. => pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete in current vblank due to missing the double-buffering deadline by a tiny bit. 5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires, dm_dcn_crtc_high_irq() gets called. 6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the pageflip has been completed/will complete in this vblank and sends out pageflip completion event to userspace and resets pflip_status = AMDGPU_FLIP_NONE. => Flip completion event sent out one vblank too early. This behaviour has been observed during my testing with measurement hardware a couple of time. The commit message says that the extra flip event code was added to dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events in case the pflip irq doesn't fire, because the "DCH HUBP" component is clock gated and doesn't fire pflip irqs in that state. Also that this clock gating may happen if no planes are active. This suggests that the problem addressed by that commit can't happen if planes are active. The proposed solution is therefore to only execute the extra pflip completion code iff the count of active planes is zero and otherwise leave pflip completion handling to the pflip irq handler, for a more race-free experience. Note that i don't know if this fixes the problem the original commit tried to address, as i don't know what the test scenario was. It does fix the observed too early pageflip events though and points out the problem introduced. Fixes: 16f17eda8bad ("drm/amd/display: Send vblank and user events at vsartup for DCN") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-19netfilter: flowtable: fix NULL pointer dereference in tunnel offload supportwenxu
The tc ct action does not cache the route in the flowtable entry. Fixes: 88bf6e4114d5 ("netfilter: flowtable: add tunnel encap/decap action offload support") Fixes: cfab6dbd0ecf ("netfilter: flowtable: add tunnel match offload support") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-19netfilter: flowtable: Fix flushing of offloaded flows on freePaul Blakey
Freeing a flowtable with offloaded flows, the flow are deleted from hardware but are not deleted from the flow table, leaking them, and leaving their offload bit on. Add a second pass of the disabled gc to delete the these flows from the flow table before freeing it. Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support") Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-19netfilter: flowtable: reload ip{v6}h in nf_flow_tuple_ip{v6}Haishuang Yan
Since pskb_may_pull may change skb->data, so we need to reload ip{v6}h at the right place. Fixes: a908fdec3dda ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table") Fixes: 7d2086871762 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-19netfilter: flowtable: reload ip{v6}h in nf_flow_nat_ip{v6}Haishuang Yan
Since nf_flow_snat_port and nf_flow_snat_ip{v6} call pskb_may_pull() which may change skb->data, so we need to reload ip{v6}h at the right place. Fixes: a908fdec3dda ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table") Fixes: 7d2086871762 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-19Merge tag 'mmc-v5.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - rtsx_pci: Fix support for some various speed modes - sdhci-of-at91: Fix support for GPIO card detect on SAMA5D2 - sdhci-cadence: Fix support for DDR52 speed mode for eMMC on UniPhier - sdhci-acpi: Fix broken WP support on Acer Aspire Switch 10 - sdhci-acpi: Workaround FW bug for suspend on Lenovo Miix 320 * tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: rtsx_pci: Fix support for speed-modes that relies on tuning mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2 mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012) mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320
2020-03-19arm64: compat: Fix syscall number of compat_clock_getresVincenzo Frascino
The syscall number of compat_clock_getres was erroneously set to 247 (__NR_io_cancel!) instead of 264. This causes the vDSO fallback of clock_getres() to land on the wrong syscall for compat tasks. Fix the numbering. Cc: <stable@vger.kernel.org> Fixes: 53c489e1dfeb6 ("arm64: compat: Add missing syscall numbers") Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-19Merge tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Three small smb3 fixes, two for stable" * tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: CIFS: fiemap: do not return EINVAL if get nothing CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first cifs: potential unintitliazed error code in cifs_getattr()
2020-03-19Merge tag 'kbuild-fixes-v5.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix __uint128_t capability test in Kconfig when GCC that defaults to 32-bit is used to build the 64-bit kernel - suppress new noisy Clang warnings -Wpointer-to-enum-cast - move the namespace field in Module.symvers for the backward compatibility reason for the depmod tool - use available compression for initramdisk when INTRAMFS_SOURCE is defined, which was the original behavior - fix modpost to handle correct large section numbers when it refers to modversion CRCs and module namespaces - fix comments and documents * tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts/kallsyms: fix wrong kallsyms_relative_base modpost: Get proper section index by get_secindex() instead of st_shndx initramfs: restore default compression behavior modpost: move the namespace field in Module.symvers last kbuild: Disable -Wpointer-to-enum-cast kbuild: doc: fix references to other documents int128: fix __uint128_t compiler test in Kconfig kconfig: introduce m32-flag and m64-flag kbuild: Fix inconsistent comment
2020-03-19rtc: max8907: add missing select REGMAP_IRQCorentin Labbe
I have hit the following build error: armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe': rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq' max8907 should select REGMAP_IRQ Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-19tools headers uapi: Update linux/in.h copyArnaldo Carvalho de Melo
To get the changes in: 267762538705 ("seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number") That ends up automatically adding the new IPPROTO_ETHERNET to the socket args beautifiers: $ tools/perf/trace/beauty/socket_ipproto.sh > before Apply this patch: $ tools/perf/trace/beauty/socket_ipproto.sh > after $ diff -u before after --- before 2020-03-19 11:48:36.876673819 -0300 +++ after 2020-03-19 11:49:00.148541377 -0300 @@ -6,6 +6,7 @@ [132] = "SCTP", [136] = "UDPLITE", [137] = "MPLS", + [143] = "ETHERNET", [17] = "UDP", [1] = "ICMP", [22] = "IDP", $ Addresses this tools/perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: David S. Miller <davem@davemloft.net> Cc: Paolo Lungaroni <paolo.lungaroni@cnit.it> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-19scripts/kallsyms: fix wrong kallsyms_relative_baseMikhail Petrov
There is the code in the read_symbol function in 'scripts/kallsyms.c': if (is_ignored_symbol(name, type)) return NULL; /* Ignore most absolute/undefined (?) symbols. */ if (strcmp(name, "_text") == 0) _text = addr; But the is_ignored_symbol function returns true for name="_text" and type='A'. So the next condition is not executed and the _text variable is always zero. It makes the wrong kallsyms_relative_base symbol as a result of the code (CONFIG_KALLSYMS_BASE_RELATIVE is defined): if (base_relative) { output_label("kallsyms_relative_base"); output_address(relative_base); printf("\n"); } Because the output_address function uses the _text variable. So the kallsyms_lookup function and all related functions in the kernel do not work properly. For example, the stack trace in oops: Call Trace: [aa095e58] [809feab8] kobj_ns_ops_tbl+0x7ff09ac8/0x7ff1c1c4 (unreliable) [aa095e98] [80002b64] kobj_ns_ops_tbl+0x7f50db74/0x80000010 [aa095ef8] [809c3d24] kobj_ns_ops_tbl+0x7feced34/0x7ff1c1c4 [aa095f28] [80002ed0] kobj_ns_ops_tbl+0x7f50dee0/0x80000010 [aa095f38] [8000f238] kobj_ns_ops_tbl+0x7f51a248/0x80000010 The right stack trace: Call Trace: [aa095e58] [809feab8] module_vdu_video_init+0x2fc/0x3bc (unreliable) [aa095e98] [80002b64] do_one_initcall+0x40/0x1f0 [aa095ef8] [809c3d24] kernel_init_freeable+0x164/0x1d8 [aa095f28] [80002ed0] kernel_init+0x14/0x124 [aa095f38] [8000f238] ret_from_kernel_thread+0x14/0x1c [masahiroy@kernel.org: This issue happens on binutils <= 2.22 The following commit fixed it: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a The symbol type of _text is 'T' on binutils >= 2.23 The minimal supported binutils version for the kernel build is 2.21 ] Signed-off-by: Mikhail Petrov <Mikhail.Petrov@mir.dev> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-19Merge tag 'perf-urgent-for-mingo-5.6-20200309' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf probe: Masami Hiramatsu: - Fix deletion of multiple probe events. - Fix userspace libraries handling by not depending on dwfl_module_addrsym(). Event parsing: Ian Rogers: - Fix reading of invalid memory in event parsing. python binding: Ilie Halip: - Fix clang detection when using CC=clang-version. build: Masami Hiramatsu: - Fix O= use with relative paths. Android: Dominik b. Czarnota: - Fix off by one in strncpy() size argument when handling Android libraries. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-19bpf: Support llvm-objcopy for vmlinux BTFFangrui Song
Simplify gen_btf logic to make it work with llvm-objcopy. The existing 'file format' and 'architecture' parsing logic is brittle and does not work with llvm-objcopy/llvm-objdump. 'file format' output of llvm-objdump>=11 will match GNU objdump, but 'architecture' (bfdarch) may not. .BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag because it is part of vmlinux image used for introspection. C code can reference the section via linker script defined __start_BTF and __stop_BTF. This fixes a small problem that previous .BTF had the SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data). Additionally, `objcopy -I binary` synthesized symbols _binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not used elsewhere) are replaced with more commonplace __start_BTF and __stop_BTF. Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns "empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?" We use a dd command to change the e_type field in the ELF header from ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting ET_EXEC as an input file is an extremely rare GNU ld feature that lld does not intend to support, because this is error-prone. The output section description .BTF in include/asm-generic/vmlinux.lds.h avoids potential subtle orphan section placement issues and suppresses --orphan-handling=warn warnings. Fixes: df786c9b9476 ("bpf: Force .BTF section start to zero when dumping from vmlinux") Fixes: cb0cc635c7a9 ("powerpc: Include .BTF section") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Stanislav Fomichev <sdf@google.com> Tested-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://github.com/ClangBuiltLinux/linux/issues/871 Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com
generated by cgit (git 2.34.1) at 2025-09-14 17:12:28 +0000