summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-17firmware: cs_dsp: Add lockdep asserts to interface functionsCharles Keepax
Some of the control functions exposed by the cs_dsp code require the pwr_lock to be held by the caller. Add lockdep_assert_held calls to ensure this is done correctly. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211117132300.1290-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: wm_adsp: Remove the wmfw_add_ctl helper functionCharles Keepax
The helper function wmfw_add_ctl is only called from one place and that place is a function with only 2 lines of code. Merge the helper function into the work function to simplify the code. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211117132300.1290-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add support for SOF firmware authenticationAjit Kumar Pandey
Add callback to notify PSP after loading firmware on DSP. PSP will validate the loaded firmware and set qualifier bit to run firmware on secured AMD systems. Signed-off-by: Julian Schroeder <Julian.Schroeder@amd.com> Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Curtis Malainey <curtis@malainey.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-14-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add trace logger supportV sujith kumar Reddy
Add trace support and configure trace stream for ACP firmware. Signed-off-by: Vishnuvardhanrao Ravuapati <vishnuvardhanrao.ravulapati@amd.com> Signed-off-by: V sujith kumar Reddy <vsreddy@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-13-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: topology: Add support for AMD ACP DAIsAjit Kumar Pandey
Add new sof dais and config to pass topology file configuration to SOF firmware running on ACP's DSP core. ACP firmware support I2S_BT, I2S_SP and DMIC controller hence add three new dais to the list of supported sof_dais Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-12-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: amd: acp-config: Remove legacy acpi based machine structAjit Kumar Pandey
We have moved legacy based machine struct into platform driver to resolve module dependency with non-SOF ALSA build, hence removed it from acp-config driver module. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-11-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add Renoir PCI driver interfaceAjit Kumar Pandey
Add PCI driver module to enable sof pci device support for Renoir. If machine flag set to FLAG_SOF_ONLY_DMIC this pci driver register platform device for non dsp based I2S platform device. If machine flag is not enabled for SOF pci probe will return without invoking sof device probe and registration Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-10-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add machine driver dsp ops for Renoir platformAjit Kumar Pandey
Add dsp ops callback to select and register machine driver. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-9-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: amd: Add module to determine ACP configurationAjit Kumar Pandey
ACP hw block configuration differs across various distributions and hence it's required to register different drivers module for distributions. For now we support three ACP drivers: * ACP without SOF use case * ACP with SOF use case * ACP with SOF use case for DMIC and non SOF for I2S endpoints As all above driver registers with common PCI ID for ACP hw block we need code to determine ACP configuration and auto select driver module. This patch expose function that return configuration flag based on dmi checks for a system. ACP driver module probe register platform device based on such configuration flag to avoid conflict with other ACP drivers probed for same PCI ID. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-8-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add PCM stream callback for Renoir dai'sAjit Kumar Pandey
Add module to support ALSA pcm stream configurations for ACP I2S and DMIC endpoints Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-7-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add dai driver dsp ops callback for RenoirAjit Kumar Pandey
Add dsp ops callback to register I2S and DMIC sof dai's with ALSA Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-6-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add IPC support for ACP IP blockAjit Kumar Pandey
Add IPC module for generic ACP block and exposed ops callback for to synchronize SOF IPC message between host and DSP Signed-off-by: Balakishore Pati <Balakishore.pati@amd.com> Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-5-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add fw loader and renoir dsp ops to load firmwareAjit Kumar Pandey
Add acp-loader module with ops callback to load and run firmware on ACP DSP block on Renoir platform. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-4-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add helper callbacks for ACP's DMA configurationAjit Kumar Pandey
ACP DMA is used for loading SOF firmware into DSP memory and data transfer from system memory to DSP memory. Add helper callbacks to initialize and configure ACP DMA block for fw loading. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-3-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: amd: Add Renoir ACP HW supportAjit Kumar Pandey
This patch initializes ACP HW block to support SOF on AMD Renoir platform. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211117093734.17407-2-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: stm32: sai: increase channels_max limitOlivier Moysan
The SAI peripheral supports up to 16 channels in TDM mode (8L+8R). The driver currently supports TDM over two channels. Increase SAI DAI playback/record channels_max, to also allow up to 16 channels in TDM mode. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20211117110031.19345-1-olivier.moysan@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: debug: Add support for IPC message injectionPeter Ujfalusi
In order to stress test the firmware's ability to handle (mis)crafted IPC messages this patch adds a debugfs interface where a binary file (message) can be written and the message is sent to the firmware as it is. Read on the same file will return the reply from the firmware if it is available as a binary. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116152137.52129-5-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: intel: Use the generic helper to get the replyPeter Ujfalusi
Make use of the generic snd_sof_ipc_process_reply() from the core instead the local implementation. snd_sof_ipc_process_reply() handles the reply retrieving and the ipc reply Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116152137.52129-4-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: imx: Use the generic helper to get the replyPeter Ujfalusi
Make use of the generic snd_sof_ipc_process_reply() from the core instead the local implementation. snd_sof_ipc_process_reply() handles the reply retrieving and the ipc reply Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116152137.52129-3-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: SOF: utils: Add generic function to get the reply for a tx messagePeter Ujfalusi
The code to get the reply for a tx is identical in all but one place: imx8_get_reply(), imx8m_get_reply(), atom_get_reply(), bdw_get_reply(). hda_dsp_ipc_get_reply() have additional check in place for PROBES and special handling of PM messages. Add a generic implementation to the core which can be used as drop in replacement. The reply size check is changed to be able to handle cases when the reply size is not know beforehand (this is the case for PROBES and DEBUG_MEM_USAGE for example). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116152137.52129-2-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: cs42l42: Remove redundant pll_divout memberRichard Fitzgerald
Now that struct cs42l42_private has pll_config, the current PLL configuration can be looked up directly in pll_ratio_table. This makes the pll_divout member of cs42l42_private redundant since it was only a copy of the value from pll_ratio_table. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211116163901.45390-5-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: cs42l42: Simplify reporting of jack unplugRichard Fitzgerald
When reporting a jack unplug there's no need to make the reported flags conditional on which flags were reported during the plug event. It's perfectly safe to report all flags and buttons as not-present and let the higher code filter for changes. There's also no need to make two separate snd_soc_jack_report() calls for presence flags and button flags. It can all be done in one report. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211116163901.45390-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: cs42l42: Remove redundant writes to RS_PLUG/RS_UNPLUG masksRichard Fitzgerald
The RS_PLUG and RS_UNPLUG interrupt masks are always written as 1 so those writes are redundant and can be deleted. This makes it completely clear in the code that only the TS_PLUG and TS_UNPLUG masks are being changed. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211116163901.45390-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: cs42l42: Remove redundant writes to DETECT_MODERichard Fitzgerald
There are multiple places where DETECT_MODE is included in a register write, but in every case it is written as 0. Removing these redundant writes makes the code less cluttered and also makes it obvious that DETECT_MODE is never changed. A single initialization to 0 is added to cs42l42_setup_hs_type_detect(). Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211116163901.45390-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-17ASoC: stm32: i2s: fix 32 bits channel length without mclkOlivier Moysan
Fix divider calculation in the case of 32 bits channel configuration, when no master clock is used. Fixes: e4e6ec7b127c ("ASoC: stm32: Add I2S driver") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20211117104404.3832-1-olivier.moysan@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: SOF: i.MX: simplify KconfigPierre-Louis Bossart
Follow the Intel example and simplify the Kconfig a) start from the end-product for 'select' chains b) use 'depends on' to filter out configurations. c) use snd-sof-of as a common module without any 'select' Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20211116124131.46414-1-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: qcom: sdm845: only setup slim ports onceSrinivas Kandagatla
Currently same slim channel map setup for every dai link, which is redundant. Fix this by adding a flag and conditionally setting these channel maps. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116115021.14213-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: codecs: lpass-rx-macro: fix HPHR setting CLSH maskSrinivas Kandagatla
For some reason we ended up using snd_soc_component_write_field for HPHL and snd_soc_component_update_bits for HPHR, so fix this. Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114623.11891-4-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: codecs: wcd934x: return error code correctly from hw_paramsSrinivas Kandagatla
Error returned from wcd934x_slim_set_hw_params() are not passed to upper layer, this could be misleading to the user which can start sending stream leading to unnecessary errors. Fix this by properly returning the errors. Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114623.11891-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: codecs: wcd938x: fix volatile register rangeSrinivas Kandagatla
Interrupt Clear registers WCD938X_INTR_CLEAR_0 - WCD938X_INTR_CLEAR_2 are not marked as volatile. This has resulted in a missing interrupt bug while performing runtime pm. regcache_sync() during runtime pm resume path will write to Interrupt clear registers with previous values which basically clears the pending interrupt and actual interrupt handler never sees this interrupt. This issue is more visible with headset plug-in plug-out case compared to headset button. Fix this by adding the Interrupt clear registers to volatile range Fixes: 8d78602aa87a ("ASoC: codecs: wcd938x: add basic driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114623.11891-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: topology: Add missing rwsem around snd_ctl_remove() callsTakashi Iwai
snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it. Fixes: 8a9782346dcc ("ASoC: topology: Add topology core") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211116071812.18109-1-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: qdsp6: q6routing: validate port id before setting up routeSrinivas Kandagatla
Validate port id before it starts sending commands to dsp this would make error handling simpler. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-6-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: qdsp6: q6adm: improve error reportingSrinivas Kandagatla
reset value for port is -1 so printing an hex would not give us very useful debug information, so use %d instead. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-5-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: qdsp6: q6asm: fix q6asm_dai_prepare error handlingSrinivas Kandagatla
Error handling in q6asm_dai_prepare() seems to be completely broken, Fix this by handling it properly. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-4-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: qdsp6: q6routing: Conditionally reset FrontEnd MixerSrinivas Kandagatla
Stream IDs are reused across multiple BackEnd mixers, do not reset the stream mixers if they are not already set for that particular FrontEnd. Ex: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below command will reset previously setup MultiMedia1 stream, because both of them are using MultiMedia1 PCM stream. amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0 reset the FrontEnd Mixers conditionally to fix this issue. This is more noticeable in desktop setup, where in alsactl tries to restore the alsa state and overwriting the previous mixer settings. Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16ASoC: qdsp6: qdsp6: q6prm: handle clk disable correctlySrinivas Kandagatla
Q6PRM clks need to be disabled using PRM_CMD_RELEASE_HW_RSC dsp command rather then using PRM_CMD_RSP_REQUEST_HW_RSC cmd with rate set to zero. DSP will throw errors if we try to disable the clock using existing code. Fix this by properly handling the clk release. Fixes: 9a0e5d6fb16f ("ASoC: qdsp6: audioreach: add q6prm support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: wm8903: Convert txt bindings to yamlDavid Heidelberg
Convert the Wolfson WM8903 Ultra-Low Power Stereo CODEC Device Tree binding documentation to json-schema. Signed-off-by: David Heidelberg <david@ixit.cz> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211028124639.38420-1-david@ixit.cz Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: codecs: MBHC: Add support for special headsetSrinivasa Rao Mandadapu
Update MBHC driver to support special headset such as apple and huwawei headsets. Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org> Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1636960288-27537-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: wm_adsp: wm_adsp_control_add() error: uninitialized symbol 'ret'Simon Trimmer
This patch fixes the static analysis warning as it is correctly indicating a possible code path, it cannot know that for the affected firmware versions subname would always be NULL. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211115120154.56782-1-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: SOF: core: Unregister machine driver before IPC and debugfsPeter Ujfalusi
To ensure clean unload of the machine driver, components and topology, do the unregister before we free IPC and debugfs. It is a possibility that part of the unregister we would have IPC communication with the firmware. Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20211102094756.9317-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: adau1701: Replace legacy gpio interface for gpiodMaíra Canal
Considering the current transition of the GPIO subsystem, remove all dependencies of the legacy GPIO interface (linux/gpio.h and linux /of_gpio.h) and replace it with the descriptor-based GPIO approach. Signed-off-by: Maíra Canal <maira.canal@usp.br> Link: https://lore.kernel.org/r/YXWo/9o7ye9a11aR@fedora Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15firmware: cs_dsp: tidy includes in cs_dsp.c and cs_dsp.hSimon Trimmer
This patch removes unused included header files and moves others into cs_dsp.h to ensure that types referenced in the header file are properly described to prevent compiler warnings. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211115120215.56824-1-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: cs42l42: Add control for audio slow-start switchRichard Fitzgerald
This adds an ALSA control so that the slow-start audio ramp feature can be disabled. This is useful for high-definition audio applications. The register field is unusual in that it is a 3-bit field with only two valid values, 000=off and 111=on. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211101101006.13092-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: Intel: add sof-nau8825 machine driverMac Chiang
The machine driver is a generic machine driver for SOF with nau8825 codec w or w/o speaker additionally. Depending on the SOC HDMI, DMIC, Bluetooth offload support are added dynamically. Only add information related to SOF since the machine driver was only tested with SOF. There are currently 4 i2s machine variants of ADL. This supports the headphone NUA8825(SSP0) alone or with smart or dumb speakers. Board 2,3,4 use SSP2 for Bluetooth offload support except board 1. Board 1 : NAU8825 + RT1019P(SSP2) Board 2 : NAU8825 + MAX98373(SSP1) Board 3 : NAU8825 + MAX98360A(SSP1) Board 4 : NAU8825 Signed-off-by: David Lin <CTLIN0@nuvoton.com> Co-developed-by: Mac Chiang <mac.chiang@intel.com> Signed-off-by: Mac Chiang <mac.chiang@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211109133808.8729-1-mac.chiang@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: codecs: Axe some dead code in 'wcd_mbhc_adc_hs_rem_irq()'Christophe JAILLET
'hphpa_on' is know to be false, so this is just dead code that should be removed. Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/57a89cc31eb2312addd3c77896d7df8206aef138.1635967035.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: cs35l41: DSP SupportDavid Rhodes
Support for HALO DSP and firmware Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211029214028.401284-2-drhodes@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15ASoC: dt-bindings: cs42l42: Convert binding to yamlRichard Fitzgerald
Replace the old .txt binding with a new schema binding. At the same time, some of the descriptions are updated to make them clearer, fix errors, or just make them fit better into the style of schema binding. The cirrus,hs-bias-ramp-rate property was missing from the old .txt binding and has been added to the yaml. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211028140902.11786-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15Merge series "ASoC: Intel: sof_sdw: Use fixed DAI link id" from Bard Liao ↵Mark Brown
<yung-chuan.liao@linux.intel.com>: This series provides a way to use constant dailink numbers for different devices. So that we don't need to renumber them in topologies. Some patches with different purpose are sent together in this series since they are dependent. Bard Liao (8): ASoC: intel: sof_sdw: return the original error number ASoC: intel: sof_sdw: rename be_index/link_id to link_index ASoC: intel: sof_sdw: Use a fixed DAI link id for AMP ASoC: intel: sof_sdw: move DMIC link id overwrite to create_sdw_dailink ASoC: intel: sof_sdw: remove SOF_RT715_DAI_ID_FIX quirk ASoC: intel: sof_sdw: remove sof_sdw_mic_codec_mockup_init ASoC: intel: sof_sdw: remove get_next_be_id ASoC: intel: sof_sdw: add link adr order check Pierre-Louis Bossart (2): ASoC: Intel: sof_sdw: fix jack detection on HP Spectre x360 convertible ASoC: Intel: sof_sdw: add SKU for Dell Latitude 9520 sound/soc/intel/boards/sof_sdw.c | 152 ++++++++++---------- sound/soc/intel/boards/sof_sdw_common.h | 7 +- sound/soc/intel/boards/sof_sdw_rt715.c | 7 - sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 7 - 4 files changed, 85 insertions(+), 88 deletions(-) -- 2.17.1
2021-11-15Merge series "Add tfa9897 rcv-gpios support" from Vincent Knecht ↵Mark Brown
<vincent.knecht@mailoo.org>: This is the continuation of a previous series [1] where - patch 1/4 is removed in favor of using pin switch This will be posted independently of tfa989x support, since it mainly require changes to sound/soc/qcom/common.c and device DTS. - patch 2/4 is already merged so here are reworked patch 3/4 (bindings fixed and example added) and patch 4/4 unchanged. [1] https://patchwork.kernel.org/project/alsa-devel/cover/20211024085840.1536438-1-vincent.knecht@mailoo.org/ Vincent Knecht (2): ASoC: dt-bindings: nxp, tfa989x: Add rcv-gpios property for tfa9897 ASoC: codecs: tfa989x: Add support for tfa9897 optional rcv-gpios .../bindings/sound/nxp,tfa989x.yaml | 41 +++++++++++++++++++ sound/soc/codecs/tfa989x.c | 20 ++++++++- 2 files changed, 60 insertions(+), 1 deletion(-) -- 2.31.1
2021-11-15ASoC: Merge rt9120 series from ChiYuan Huang:Mark Brown
Changes from ChiYuan Huang <cy_huang@richtek.com> to fix a couple of bugs and add a new device ID/quirk for the rt9120s to the driver.