summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-12ASoC: omap-mcbsp: Single function CLKR/FSR source mux configurationPeter Ujfalusi
Use single function for the CLKR/FSR mux configuration. OMAP2/3 has 6 pin configuration on McBSP1 instance, while on OMAP4 McBSP4 instance have the 6 pin configuration so the omap2_mcbsp1_mux_* is not correct name for all support OMAP versions Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC headerPeter Ujfalusi
Clock signal muxing, and functional clock related defines are only needed in ASoC drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Mark Brown <broonoie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configurationPeter Ujfalusi
On OMAP2/3 McBSP1 port has 6 pin setup, while on OMAP4 the port is McBSP4. Implement the CLKR/FSR clock mux selection for OMAP4, and make sure that we add the correct callback for the correct port across supported OMAP versions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap McBSP: Clear rx_irq at probe time for OMAP4Peter Ujfalusi
On OMAP4 we have one interrupt line per McBSP port. At probe time tx, and rx irq value will be -ENXIO, and only the tx irq will get corrected. In omap_mcbsp_request if the rx_irq is not 0 we proceed, and try to request the interrupt, which will fail on OMAP4 (rx_irq == -6). To avoid this error, clear the rx_irq at probe time on OMAP4. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: When closing the port select PRCM source for CLKS signalPeter Ujfalusi
If external source for the CLKS signal selection kept after the port is no longer in use the system might refuse to go suspend. There is also a chance that the external clock is not running when next time the McBSP port is started which can result errors when we try to access McBSP registers. Reset the CLKS source back to PRCM source unconditionally. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Configure wakeup in later phasePeter Ujfalusi
Configure the WAKEUPEN register at the same time we configure the rest of the McBSP registers. In case of OMAP3+, if the sysclock has been reconfigured we are going to disable McBSP for the duration of the clock change, which will reset the McBSP registers. The WAKEUPEN register need to be configured later, so the changes will be effective during runtime. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicrocom> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap: mcbsp: Remove redundant checks for the st_data pointerPeter Ujfalusi
The parent functions of omap_st_start/stop also checks the validity of the st_data pointer so we do not need to do it again inside of omap_st_start/stop Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap: mcbsp: Use uniform st_data pointer initializationPeter Ujfalusi
In this way we can save few lines, and have uniform way of initializing the st_data in all functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Simplify DMA configurationPeter Ujfalusi
Configure the DMA request line, port address, and stream name at probe time instead of every time we start a stream. These settings are static in the system. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Merge the omap_mcbsp_data into omap_mcbsp structurePeter Ujfalusi
Since the drivers has been merged, merge the two structures together. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Cleanup of module probe/remove codePeter Ujfalusi
Use devm_* where it is possible to save on cleanup path. Start merging the two mcbsp file content. Move pm_runtime_enable/disable calls to ASoC probe, remove from module probe/remove time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: OMAP McBSP: Remove redundant accessorsPeter Ujfalusi
We no longer need accessor functions for max_tx/rx_threshold, dma_op_mode or for the FIFO size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: OMAP: mcbsp.h: Clean up bit definitionsPeter Ujfalusi
Use BIT() for bit position, correct field definition by adding mask to them, and also adding the missing spaces around '<<' Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM: OMAP: Do not register omap-mcbsp-dai devicePeter Ujfalusi
The driver for omap-mcbsp-dai no longer exist since it has been merged with the omap-mcbsp driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Create a single driver for McBSPPeter Ujfalusi
The OMAP McBSP driver stack used to contain two different drivers. One of them was used as kind low-level access to the IP, while the other driver was the ASoC DAI driver. There were global, shared structures, in different places, the McBSP instances are reffered with id numbers (sometimes 0 based, in other cases 1 based id numbers). Create one single driver for OMAP McBSP with name: omap-mcbsp. Convert the old omap-mcbsp driver initially to be a library for the omap-mcbsp DAI driver. With this change we can get rid of all global variables, structures. Further cleanup is coming... Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: OMAP: McBSP: Consolidate plat/mcbsp.h contentPeter Ujfalusi
Move most of the content of the plat/mcbsp.h header file under sound/soc/omap/ to help further cleanups. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12OMAP: mcbsp: Move core driver under sound/soc/omapPeter Ujfalusi
In order to consolidate the McBSP driver move it out from arch/arm/plat-omap directory under sound/soc/omap/ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM: OMAP: mcbsp: Convert core driver to proper platform driverPeter Ujfalusi
Convert the plat-omap/mcbsp.c driver to be proper platform driver. Remove the omap_mcbsp_init function call which was called from mach-omap1/2/mcbsp.c to register the platform driver for the just created platform device in the same function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12OMAP4: panda: Correct cpu version check for 4430Peter Ujfalusi
The cpu_is_omap4430() macro always return with 0. Use the correct cpu_is_omap443x() to check for Panda revision. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ALSA: Add a hook capability to vmaster controlsTakashi Iwai
This patch adds a hook to vmaster control to be called at each time when the master value is changed. It'd be handy for an additional mute LED control following the Master switch, for example. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12HID: multitouch: detect serial protocolBenjamin Tissoires
Microsoft's documentation about multitouch protocols tells that if a device presents one touch per report, then it should be treated as a serial protocol. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12regulator: Merge tps65217_pmic_ldo234_ops and tps65217_pmic_dcdc_ops to ↵Axel Lin
tps65217_pmic_ops Most callback functions implementation for tps65217_pmic_ldo234_ops and tps65217_pmic_dcdc_ops are the same except the rid range checking. This patch uses tps65217_pmic_ops for all DCDCx, LDO2, LDO3, and LDO4. And rework tps65217_pmic_set_voltage to make it can be called for DCDCx, LDO2, LDO3, and LDO4. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12regulator: Use DIV_ROUND_CLOSEST in wm8350_isink_get_currentAxel Lin
DIV_ROUND_CLOSEST performs the computation (x + d/2)/d with better readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12ASoC: Revert widget I/O locking for 3.4Mark Brown
The widget locking depends on some of the other locking changes which are queued up for 3.5 not 3.4 so revert the locking changes and reapply them in 3.5. This reverts commit 66bf93212f19548f5ed221356b2d70189cc18254 and 96acc357bedad69fbc94d1b923a960af5a411c6f. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-03-12HID: handle all multitouch devices through hid-multitouchBenjamin Tissoires
When the quirk HID_QUIRK_MULTITOUCH is present and when hid-multitouch is loaded, let's pass the device to hid-multitouch even if it has not been registered in hid-multitouch. If any other driver wants to take precedence over hid-multitouch, the usual way of adding it to hid_have_special_driver will work as the quirk HID_QUIRK_MULTITOUCH won't be set by the generic hid layer. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12HID: multitouch: fix handling of buggy reports descriptors for Dell ST2220TBenjamin Tissoires
LG multitouch panels, such as the one found in Dell ST2220T, has buggy reports descriptors. With the previous implementation, it was impossible to rely on the reports descriptors to determine how the different touches are emitted from the device. This patch changes the splitting of the different touches in the report in a more robust way. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12usb: gadget: Kconfig: fix typo for 'different'Fabio Baltieri
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12ath6kl: Fix merge error in ath6kl_set_ies()Aarthi Thiruvengadam
Portion of the commit id 080eec4fb4 ("ath6kl: Clear the IE in firmware if not set") was overwritten by mistake due to a merge conflict. This patch fixes the code back to how it should be. kvalo: more details to the commit log Signed-off-by: Aarthi Thiruvengadam <athiruve@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-11net: Convert printks to pr_<level>Joe Perches
Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11dql: Fix undefined jiffiesTom Herbert
In some configurations, jiffies may be undefined in lib/dynamic_queue_limits.c. Adding include of jiffies.h to avoid this. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11net: get rid of some pointless casts to sockaddrMaciej Żenczykowski
The following 4 functions: move_addr_to_kernel move_addr_to_user verify_iovec verify_compat_iovec are always effectively called with a sockaddr_storage. Make this explicit by changing their signature. This removes a large number of casts from sockaddr_storage to sockaddr. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11SUNRPC: Fix a few sparse warningsTrond Myklebust
net/sunrpc/svcsock.c:412:22: warning: incorrect type in assignment (different address spaces) - svc_partial_recvfrom now takes a struct kvec, so the variable save_iovbase needs to be an ordinary (void *) Make a bunch of variables in net/sunrpc/xprtsock.c static Fix a couple of "warning: symbol 'foo' was not declared. Should it be static?" reports. Fix a couple of conflicting function declarations. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-11ipv6: Fix Smatch warning.Li Wei
With commit d6ddef9e641d(IPv6: Fix not join all-router mcast group when forwarding set.) I check 'dev' after it's dereference that leads to a Smatch complaint: net/ipv6/addrconf.c:438 ipv6_add_dev() warn: variable dereferenced before check 'dev' (see line 432) net/ipv6/addrconf.c 431 /* protected by rtnl_lock */ 432 rcu_assign_pointer(dev->ip6_ptr, ndev); ^^^^^^^^^^^^ Old dereference. 433 434 /* Join all-node multicast group */ 435 ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes); 436 437 /* Join all-router multicast group if forwarding is set */ 438 if (ndev->cnf.forwarding && dev && (dev->flags & IFF_MULTICAST)) ^^^ Remove the check to avoid the complaint as 'dev' can't be NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11tcp: fix syncookie regressionEric Dumazet
commit ea4fc0d619 (ipv4: Don't use rt->rt_{src,dst} in ip_queue_xmit()) added a serious regression on synflood handling. Simon Kirby discovered a successful connection was delayed by 20 seconds before being responsive. In my tests, I discovered that xmit frames were lost, and needed ~4 retransmits and a socket dst rebuild before being really sent. In case of syncookie initiated connection, we use a different path to initialize the socket dst, and inet->cork.fl.u.ip4 is left cleared. As ip_queue_xmit() now depends on inet flow being setup, fix this by copying the temp flowi4 we use in cookie_v4_check(). Reported-by: Simon Kirby <sim@netnation.com> Bisected-by: Simon Kirby <sim@netnation.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11usb: asix: Patch for Sitecom LN-031Joerg Neikes
This patch adds support for the Sitecom LN-031 USB adapter with a AX88178 chip. Added USB id to find correct driver for AX88178 1000 Ethernet adapter. Signed-off-by: Joerg Neikes <j.neikes@midlandgate.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11MAINTAINERS: add an entry for the PHC codeRichard Cochran
Some months ago, tglx asked me off list if I would maintain the PTP Hardware Clock code. Since then, the code has been fully merged, and I am actively looking after it. This patch makes it official. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11r8169: enable transmit time stamping.Richard Cochran
This patch has been tested on a machine with the Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05). Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11drivers/net/irda/{ali-ircc, via-ircc, w83977af-ir}.c: ensure arguments to ↵Julia Lawall
request_irq and free_irq are compatible Convert calls to free_irq so that the second argument is the same as the last argument of the corresponding call to request_irq. Without this property, free_irq does nothing. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11drivers/atm/eni.c: ensure arguments to request_irq and free_irq are compatibleJulia Lawall
Convert calls to free_irq so that the second argument is the same as the last argument of the corresponding call to request_irq. Without this property, free_irq does nothing. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11caif: make zero a legal caif connetion id.sjur.brandeland@stericsson.com
Connection ID configured through RTNL must allow zero as connection id. If connection-id is not given when creating the interface, configure a loopback interface using ifindex as connection-id. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11caif: Fix for a race in socket transmit with flow control.Dmitry Tarnyagin
Kill faulty checks on flow-off leading to connection drop at race conditions. caif_socket checks for flow-on before transmitting and goes to sleep or return -EAGAIN upon flow stop. Remove faulty subsequent checks on flow-off leading to connection drop. Also fix memory leaks on some of the errors paths. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
2012-03-11Merge branch 'davem-next.r8169' of git://violet.fr.zoreil.com/romieu/linuxDavid S. Miller
2012-03-11regulator: Use array to store dcdc_range settings for tps65912Axel Lin
Then we can use the regulator id as array index to access the array. This change makes the code simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Rename s5m8767_convert_voltage to s5m8767_convert_voltage_to_selAxel Lin
This function finds the smallest voltage that falls within the specified range, and then returns the selector. This rename makes the intention more clear. Also remove unneeded local variables min_vol and max_vol in s5m8767_set_voltage and s5m8767_set_voltage_buck. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: tps6524x: Remove unneeded comment for N_REGULATORSAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Rename set_voltage_sel callback function name to *_selAxel Lin
This change improves readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Fix s5m8767_set_voltage_time_sel calculation valueSangbeom Kim
In the s5m8767_set_voltage_time_sel function, divisor unit is wrong. ramp_delay is usec unit. So 1000 should be multiplied. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: tps6586x: fix typo in debug messageThierry Reding
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: tps65910: Sleep off rails when ext sleep configuredLaxman Dewangan
Keep the rails OFF in sleep mode only when the rails are controlled by external sleep control. The devices tps65910 and tps65911, both has the sleep input. The tps65911's sleep input is not same as tps65910's EN3 and hence taking care of SLEEP input as separate external sleep control input. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit (git 2.34.1) at 2025-09-22 08:45:14 +0000