summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-29irqchip/gic-v3: Convert arm64 GIC accessors to {read,write}_sysreg_sWill Deacon
The GIC system registers are accessed using open-coded wrappers around the mrs_s/msr_s asm macros. This patch moves the code over to the {read,wrote}_sysreg_s accessors instead, reducing the amount of explicit asm blocks in the arch headers. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-28CIFS: iterate over posix acl xattr entry correctly in ACL_to_cifs_posix()Eryu Guan
Commit 2211d5ba5c6c ("posix_acl: xattr representation cleanups") removes the typedefs and the zero-length a_entries array in struct posix_acl_xattr_header, and uses bare struct posix_acl_xattr_header and struct posix_acl_xattr_entry directly. But it failed to iterate over posix acl slots when converting posix acls to CIFS format, which results in several test failures in xfstests (generic/053 generic/105) when testing against a samba v1 server, starting from v4.9-rc1 kernel. e.g. [root@localhost xfstests]# diff -u tests/generic/105.out /root/xfstests/results//generic/105.out.bad --- tests/generic/105.out 2016-09-19 16:33:28.577962575 +0800 +++ /root/xfstests/results//generic/105.out.bad 2016-10-22 15:41:15.201931110 +0800 @@ -1,3 +1,4 @@ QA output created by 105 -rw-r--r-- root +setfacl: subdir: Invalid argument -rw-r--r-- root Fix it by introducing a new "ace" var, like what cifs_copy_posix_acl() does, and iterating posix acl xattr entries over it in the for loop. Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2016-11-28Call echo service immediately after socket reconnectSachin Prabhu
Commit 4fcd1813e640 ("Fix reconnect to not defer smb3 session reconnect long after socket reconnect") changes the behaviour of the SMB2 echo service and causes it to renegotiate after a socket reconnect. However under default settings, the echo service could take up to 120 seconds to be scheduled. The patch forces the echo service to be called immediately resulting a negotiate call being made immediately on reconnect. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2016-11-28CIFS: Fix BUG() in calc_seckey()Sachin Prabhu
Andy Lutromirski's new virtually mapped kernel stack allocations moves kernel stacks the vmalloc area. This triggers the bug kernel BUG at ./include/linux/scatterlist.h:140! at calc_seckey()->sg_init() Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com>
2016-11-28Documentation/process/howto: Only send regression fixes after -rc1Dan Carpenter
The original text was not clear if white space or other harmless patches should be merged in -rc kernels. The discussion at Kernel Summit said that we should be more strict about sending regression fixes only. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-28drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgrRex Zhu
This could lead to mclk dpm problems on some boards. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Ack-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-11-28Merge branch 'for-4.9-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "The recent changes in ahci MSI handling need one more fix. Hopefully, this restores parity with before. The other two are minor fixes with both low impact and risk" * 'for-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: always fall back to single-MSI mode libata-scsi: Fixup ata_gen_passthru_sense() mvsas: fix error return code in mvs_task_prep()
2016-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Two ugly build warning fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: dbri: Fix compiler warning qlogicpti: Fix compiler warnings
2016-11-28bpf/samples: Fix PT_REGS_IP on s390x and use itMichael Holzheu
The files "sampleip_kern.c" and "trace_event_kern.c" directly access "ctx->regs.ip" which is not available on s390x. Fix this and use the PT_REGS_IP() macro instead. Also fix the macro for s390x and use "psw.addr" from "pt_regs". Reported-by: Zvonko Kosic <zvonko.kosic@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net: dsa: fix unbalanced dsa_switch_tree reference countingNikita Yushchenko
_dsa_register_switch() gets a dsa_switch_tree object either via dsa_get_dst() or via dsa_add_dst(). Former path does not increase kref in returned object (resulting into caller not owning a reference), while later path does create a new object (resulting into caller owning a reference). The rest of _dsa_register_switch() assumes that it owns a reference, and calls dsa_put_dst(). This causes a memory breakage if first switch in the tree initialized successfully, but second failed to initialize. In particular, freed dsa_swith_tree object is left referenced by switch that was initialized, and later access to sysfs attributes of that switch cause OOPS. To fix, need to add kref_get() call to dsa_get_dst(). Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28geneve: fix ip_hdr_len reserved for geneve6 tunnel.Haishuang Yan
It shold reserved sizeof(ipv6hdr) for geneve in ipv6 tunnel. Fixes: c3ef5aa5e5 ('geneve: Merge ipv4 and ipv6 geneve_build_skb()') Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net: handle no dst on skb in icmp6_sendDavid Ahern
Andrey reported the following while fuzzing the kernel with syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 3859 Comm: a.out Not tainted 4.9.0-rc6+ #429 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800666d4200 task.stack: ffff880067348000 RIP: 0010:[<ffffffff833617ec>] [<ffffffff833617ec>] icmp6_send+0x5fc/0x1e30 net/ipv6/icmp.c:451 RSP: 0018:ffff88006734f2c0 EFLAGS: 00010206 RAX: ffff8800666d4200 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000018 RBP: ffff88006734f630 R08: ffff880064138418 R09: 0000000000000003 R10: dffffc0000000000 R11: 0000000000000005 R12: 0000000000000000 R13: ffffffff84e7e200 R14: ffff880064138484 R15: ffff8800641383c0 FS: 00007fb3887a07c0(0000) GS:ffff88006cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000006b040000 CR4: 00000000000006f0 Stack: ffff8800666d4200 ffff8800666d49f8 ffff8800666d4200 ffffffff84c02460 ffff8800666d4a1a 1ffff1000ccdaa2f ffff88006734f498 0000000000000046 ffff88006734f440 ffffffff832f4269 ffff880064ba7456 0000000000000000 Call Trace: [<ffffffff83364ddc>] icmpv6_param_prob+0x2c/0x40 net/ipv6/icmp.c:557 [< inline >] ip6_tlvopt_unknown net/ipv6/exthdrs.c:88 [<ffffffff83394405>] ip6_parse_tlv+0x555/0x670 net/ipv6/exthdrs.c:157 [<ffffffff8339a759>] ipv6_parse_hopopts+0x199/0x460 net/ipv6/exthdrs.c:663 [<ffffffff832ee773>] ipv6_rcv+0xfa3/0x1dc0 net/ipv6/ip6_input.c:191 ... icmp6_send / icmpv6_send is invoked for both rx and tx paths. In both cases the dst->dev should be preferred for determining the L3 domain if the dst has been set on the skb. Fallback to the skb->dev if it has not. This covers the case reported here where icmp6_send is invoked on Rx before the route lookup. Fixes: 5d41ce29e ("net: icmp6_send should use dst dev to determine L3 domain") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Merge branch 'phy-doc-improvements'David S. Miller
Florian Fainelli says: ==================== Documentation: net: phy: Improve documentation This patch series addresses discussions and feedback that was recently received on the mailing-list in the area of: flow control/pause frames, interpretation of phy_interface_t and finally add some links to useful standards documents. Changes in v3: - add Timur's feedback into patch 3 Changes in v2: - clarify a few things in the RGMII section, add a paragraph about common issues with RGMII delay mismatches ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Documentation: net: phy: Add links to several standards documentsFlorian Fainelli
Add links to the IEEE 802.3-2008 document, and the RGMII v1.3 and v2.0 revisions of the standard. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Documentation: net: phy: Add blurb about RGMIIFlorian Fainelli
RGMII is a recurring source of pain for people with Gigabit Ethernet hardware since it may require PHY driver and MAC driver level configuration hints. Document what are the expectations from PHYLIB and what options exist. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Documentation: net: phy: Add a paragraph about pause frames/flow controlFlorian Fainelli
Describe that the Ethernet MAC controller is ultimately responsible for dealing with proper pause frames/flow control advertisement and enabling, and that it is therefore allowed to have it change phydev->supported/advertising with SUPPORTED_Pause and SUPPORTED_AsymPause. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Documentation: net: phy: remove description of function pointersFlorian Fainelli
Remove the function pointers documentation which duplicates information found in include/linux/phy.h. Maintaining documentation about two different locations just does not work, but the code is less likely to be outdated. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net: dsa: mv88e6xxx: Fix mv88e6xxx_g1_irq_free() interrupt countAndreas Färber
mv88e6xxx_g1_irq_setup() sets up chip->g1_irq.nirqs interrupt mappings, so free the same amount. This will be 8 or 9 in practice, less than 16. Fixes: dc30c35be720 ("net: dsa: mv88e6xxx: Implement interrupt support.") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28dbri: Fix compiler warningTushar Dave
dbri uses 'u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enabled 64bit DMA and therefore dma_addr_t became of type u64. This makes 'incompatible pointer type' warnings inevitable. e.g. sound/sparc/dbri.c: In function ‘snd_dbri_create’: sound/sparc/dbri.c:2538: warning: passing argument 3 of ‘dma_zalloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:608: note: expected ‘dma_addr_t *’ but argument is of type ‘u32 *’ For the record, dbri(sbus) driver never executes on sun4v. Therefore even though 64bit DMA is enabled on SPARC, dbri continues to use legacy iommu that guarantees DMA address is always in 32bit range. This patch resolves above compiler warning. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Reviewed-by: thomas tai <thomas.tai@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28qlogicpti: Fix compiler warningsTushar Dave
qlogicpti uses '__u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enabled 64bit DMA and therefore dma_addr_t became of type u64. This makes 'incompatible pointer type' warnings inevitable. e.g. drivers/scsi/qlogicpti.c: In function ‘qpti_map_queues’: drivers/scsi/qlogicpti.c:813: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’ drivers/scsi/qlogicpti.c:822: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’ For the record, qlogicpti never executes on sun4v. Therefore even though 64bit DMA is enabled on SPARC, qlogicpti continues to use legacy iommu that guarantees DMA address is always in 32bit range. This patch resolves aforementioned compiler warnings. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Reviewed-by: thomas tai <thomas.tai@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Merge branch 'mlx4-fixes'David S. Miller
Tariq Toukan says: ==================== mlx4 bug fixes for 4.9 This patchset includes 2 bug fixes: * In patch 1 we revert the commit that avoids invoking unregister_netdev in shutdown flow, as it introduces netdev presence issues where it can be accessed unsafely by ndo operations during the flow. * Patch 2 is a simple fix for a variable uninitialization issue. Series generated against net commit: 6998cc6ec237 tipc: resolve connection flow control compatibility problem ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx4: Fix uninitialized fields in rule when adding promiscuous mode to ↵Jack Morgenstein
device managed flow steering In procedure mlx4_flow_steer_promisc_add(), several fields were left uninitialized in the rule structure. Correctly initialize these fields. Fixes: 592e49dda812 ("net/mlx4: Implement promiscuous mode with device managed flow-steering") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Revert "net/mlx4_en: Avoid unregister_netdev at shutdown flow"Tariq Toukan
This reverts commit 9d76931180557270796f9631e2c79b9c7bb3c9fb. Using unregister_netdev at shutdown flow prevents calling the netdev's ndos or trying to access its freed resources. This fixes crashes like the following: Call Trace: [<ffffffff81587a6e>] dev_get_phys_port_id+0x1e/0x30 [<ffffffff815a36ce>] rtnl_fill_ifinfo+0x4be/0xff0 [<ffffffff815a53f3>] rtmsg_ifinfo_build_skb+0x73/0xe0 [<ffffffff815a5476>] rtmsg_ifinfo.part.27+0x16/0x50 [<ffffffff815a54c8>] rtmsg_ifinfo+0x18/0x20 [<ffffffff8158a6c6>] netdev_state_change+0x46/0x50 [<ffffffff815a5e78>] linkwatch_do_dev+0x38/0x50 [<ffffffff815a6165>] __linkwatch_run_queue+0xf5/0x170 [<ffffffff815a6205>] linkwatch_event+0x25/0x30 [<ffffffff81099a82>] process_one_work+0x152/0x400 [<ffffffff8109a325>] worker_thread+0x125/0x4b0 [<ffffffff8109a200>] ? rescuer_thread+0x350/0x350 [<ffffffff8109fc6a>] kthread+0xca/0xe0 [<ffffffff8109fba0>] ? kthread_park+0x60/0x60 [<ffffffff816a1285>] ret_from_fork+0x25/0x30 Fixes: 9d7693118055 ("net/mlx4_en: Avoid unregister_netdev at shutdown flow") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reported-by: Steve Wise <swise@opengridcomputing.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Merge branch 'mlx5-DCBX-and-ethtool-updates'David S. Miller
Saeed Mahameed says: ==================== Mellanox 100G mlx5 DCBX and ethtool updates This series provides the following mlx5 updates: From Huy: DCBX CEE API and DCBX firmware/host modes support. - 1st patch ensures the dcbnl_rtnl_ops is published only when the qos capability bits is on. - 2nd patch adds the support for CEE interfaces into mlx5 dcbnl_rtnl_ops - 3rd patch refactors ETS query to read ETS configuration directly from firmware rather than having a software shadow to it. The existing IEEE interfaces stays the same. - 4th patch adds the support for MLX5_REG_DCBX_PARAM and MLX5_REG_DCBX_APP firmware commands to manipulate mlx5 DCBX mode. - 5th patch adds the driver support for the new DCBX firmware. This ensures the backward compatibility versus the old and new firmware. With the new DCBX firmware, qos settings can be controlled by either firmware or software depending on the DCBX mode. From Kamal and Saeed: - mlx5 self-test support. From Shaker: - Private flag to give the user the ability to enable/disable mlx5 CQE compression. V1->V2: - Check ETS capability where needed in: ("net/mlx5e: Read ETS settings directly from firmware") - Fix return value of mlx5e_dcbnl_switch_to_host_mode in: ("net/mlx5e: ConnectX-4 firmware support for DCBX") - Update commit message of: ("net/mlx5e: ConnectX-4 firmware support for DCBX") - Fix two sparse static check warnings in en_selftest.c This series was generated against commit: e5f12b3f5ebb ("Merge branch 'mlxsw-trap-groups-and-policers'") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: Add CQE compression user controlShaker Daibes
The user can now override the automatic driver decision using the rx_cqe_compress flag, which is the preference for CQE compression. The flag is initialized with the automatic driver decision. Signed-off-by: Shaker Daibes <shakerd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: Moves pflags to priv->paramsShaker Daibes
pflags is a configuration parameter for the netdev, naturally it belongs to priv->params. Also introduce MLX5E_GET_PFLAG Signed-off-by: Shaker Daibes <shakerd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: Add support for loopback selftestSaeed Mahameed
Extend the self diagnostic tests to support loopback test. The loopback test doesn't require the offline flag, it will use the generic dev_queue_xmit and a dedicated packet_type to capture and verify mlx5e selftest loopback packets. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: Add support for ethtool self diagnostics testKamal Heib
The self diagnostics test implementaion include the following features: 1. Link Test: Check that link is in up state. 2. Speed Test: Check that link was negotiated correctly. 3. Health Test: Check the device health. Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: Add DCBX control interfaceHuy Nguyen
Use setdcbx interface to set the DCBX mode to firmware or os. If setdcbx is called with mode value of zero, the DCBX mode is set to firmware. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: ConnectX-4 firmware support for DCBXHuy Nguyen
DBCX by default is controlled by firmware where dcbx capability bit is set. In this mode, firmware is responsible for reading/sending the TLV packets from/to the remote partner. This patch sets up the infrastructure to move between HOST/FW DCBX control mode. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5: Add DCBX firmware commands supportHuy Nguyen
Add set/query commands for DCBX_PARAM register Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: Read ETS settings directly from firmwareHuy Nguyen
Issue description: Current implementation saves the ETS settings from user in a temporal soft copy and returns this settings when user queries the ETS settings. With the new DCBX firmware, the ETS settings can be changed by firmware when the DCBX is in firmware controlled mode. Therefore, user will obtain wrong values from the temporal soft copy. Solution: 1. Read the ETS settings directly from firmware. 2. For tc_tsa: a. Initialize tc_tsa to vendor IEEE_8021QAZ_TSA_VENDOR at netdev creation. b. When reading ETS setting from FW, if the traffic class bandwidth is less than 100, set tc_tsa to IEEE_8021QAZ_TSA_ETS. This implementation solves the scenarios when the DCBX is in FW control and willing bit is on which means the ETS setting is dictated by remote switch. Also check ETS capability where needed. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: Support DCBX CEE APIHuy Nguyen
Add DCBX CEE API interface for ConnectX-4. Configurations are stored in a temporary structure and are applied to the card's firmware when the CEE's setall callback function is called. Note: priority group in CEE is equivalent to traffic class in ConnectX-4 hardware spec. bw allocation per priority in CEE is not supported because ConnectX-4 only supports bw allocation per traffic class. user priority in CEE does not have an equivalent term in ConnectX-4. Therefore, user priority to priority mapping in CEE is not supported. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: Add qos capability checkHuy Nguyen
Make sure firmware supports qos before exposing the DCB API. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/sched: Export tc_tunnel_key so its UAPI accessibleRoi Dayan
Export tc_tunnel_key so it can be used from user space. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28virtio-net: enable multiqueue by defaultJason Wang
We use single queue even if multiqueue is enabled and let admin to enable it through ethtool later. This is used to avoid possible regression (small packet TCP stream transmission). But looks like an overkill since: - single queue user can disable multiqueue when launching qemu - brings extra troubles for the management since it needs extra admin tool in guest to enable multiqueue - multiqueue performs much better than single queue in most of the cases So this patch enables multiqueue by default: if #queues is less than or equal to #vcpu, enable as much as queue pairs; if #queues is greater than #vcpu, enable #vcpu queue pairs. Cc: Hannes Frederic Sowa <hannes@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Neil Horman <nhorman@redhat.com> Cc: Jeremy Eder <jeder@redhat.com> Cc: Marko Myllynen <myllynen@redhat.com> Cc: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28amd-xgbe: Fix unused suspend handlers build warningBorislav Petkov
Fix: drivers/net/ethernet/amd/xgbe/xgbe-main.c:835:12: warning: ‘xgbe_suspend’ defined but not used [-Wunused-function] drivers/net/ethernet/amd/xgbe/xgbe-main.c:855:12: warning: ‘xgbe_resume’ defined but not used [-Wunused-function] I see it during randconfig builds here. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28ARC: mm: IOC: Don't enable IOC by defaultVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-28ARC: Don't use "+l" inline asm constraintVineet Gupta
Apparenty this is coming in the way of gcc fix which inhibits the usage of LP_COUNT as a gpr. Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-28tcp: Set DEFAULT_TCP_CONG to bbr if DEFAULT_BBR is setJulian Wollrath
Signed-off-by: Julian Wollrath <jwollrath@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Merge branch 'fix-RTL8211F-TX-delay-handling'David S. Miller
Martin Blumenstingl says: ==================== net: phy: realtek: fix RTL8211F TX-delay handling The RTL8211F PHY driver currently enables the TX-delay only when the phy-mode is PHY_INTERFACE_MODE_RGMII. This is incorrect, because there are three RGMII variations of the phy-mode which explicitly request the PHY to enable the RX and/or TX delay, while PHY_INTERFACE_MODE_RGMII specifies that the PHY should disable the RX and/or TX delays. Additionally to the RTL8211F PHY driver change this contains a small update to the phy-mode documentation to clarify the purpose of the RGMII phy-modes. While this may not be perfect yet it's at least a start. Please feel free to drop this patch from this series and send an improved version yourself. These patches are the results of recent discussions, see [0] [0] http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001688.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net: phy: realtek: fix enabling of the TX-delay for RTL8211FMartin Blumenstingl
The old logic always enabled the TX-delay when the phy-mode was set to PHY_INTERFACE_MODE_RGMII. There are dedicated phy-modes which tell the PHY driver to enable the RX and/or TX delays: - PHY_INTERFACE_MODE_RGMII should disable the RX and TX delay in the PHY (if required, the MAC should add the delays in this case) - PHY_INTERFACE_MODE_RGMII_ID should enable RX and TX delay in the PHY - PHY_INTERFACE_MODE_RGMII_TXID should enable the TX delay in the PHY - PHY_INTERFACE_MODE_RGMII_RXID should enable the RX delay in the PHY (currently not supported by RTL8211F) With this patch we enable the TX delay for PHY_INTERFACE_MODE_RGMII_ID and PHY_INTERFACE_MODE_RGMII_TXID. Additionally we now explicity disable the TX-delay, which seems to be enabled automatically after a hard-reset of the PHY (by triggering it's reset pin) to get a consistent state (as defined by the phy-mode). This fixes a compatibility problem with some SoCs where the TX-delay was also added by the MAC. With the TX-delay being applied twice the TX clock was off and TX traffic was broken or very slow (<10Mbit/s) on 1000Mbit/s links. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Documentation: devicetree: clarify usage of the RGMII phy-modesMartin Blumenstingl
RGMII requires special RX and/or TX delays depending on the actual hardware circuit/wiring. These delays can be added by the MAC, the PHY or the designer of the circuit (the latter means that no delay has to be added by PHY or MAC). There are 4 RGMII phy-modes used describe where a delay should be applied: - rgmii: the RX and TX delays are either added by the MAC (where the exact delay is typically configurable, and can be turned off when no extra delay is needed) or not needed at all (because the hardware wiring adds the delay already). The PHY should neither add the RX nor TX delay in this case. - rgmii-rxid: configures the PHY to enable the RX delay. The MAC should not add the RX delay in this case. - rgmii-txid: configures the PHY to enable the TX delay. The MAC should not add the TX delay in this case. - rgmii-id: combines rgmii-rxid and rgmii-txid and thus configures the PHY to enable the RX and TX delays. The MAC should neither add the RX nor TX delay in this case. Document these cases in the ethernet.txt documentation to make it clear when to use each mode. If applied incorrectly one might end up with MAC and PHY both enabling for example the TX delay, which breaks ethernet TX traffic on 1000Mbit/s links. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Merge branch 'MV88E6097-fixes'David S. Miller
Stefan Eichenberger says: ==================== Fix support for the MV88E6097 This patchset fixes the following two issues for the MV88E6097: - Add missing definition of g1_irqs - Add missing comment ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net: dsa: mv88e6xxx: add missing comment for MV88E6097Stefan Eichenberger
Add a missing comment for the MV88E6097 because of unification. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net: dsa: mv88e6xxx: add g1_irqs definition for MV88E6097Stefan Eichenberger
Add the missing definition of g1_irqs for MV88E6097. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/iucv: Use explicit clean up labels in iucv_init()Sebastian Andrzej Siewior
Ursula suggested to use explicit labels for clean up in the error path instead of one `out_free' label, which handles multiple exits, introduced in commit 38b482929e8f ("net/iucv: Convert to hotplug state machine"). Suggested-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Cc: rt@linutronix.de Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20161124161013.dukr42y2nwscosk6@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-28net, sched: respect rcu grace period on cls destructionDaniel Borkmann
Roi reported a crash in flower where tp->root was NULL in ->classify() callbacks. Reason is that in ->destroy() tp->root is set to NULL via RCU_INIT_POINTER(). It's problematic for some of the classifiers, because this doesn't respect RCU grace period for them, and as a result, still outstanding readers from tc_classify() will try to blindly dereference a NULL tp->root. The tp->root object is strictly private to the classifier implementation and holds internal data the core such as tc_ctl_tfilter() doesn't know about. Within some classifiers, such as cls_bpf, cls_basic, etc, tp->root is only checked for NULL in ->get() callback, but nowhere else. This is misleading and seemed to be copied from old classifier code that was not cleaned up properly. For example, d3fa76ee6b4a ("[NET_SCHED]: cls_basic: fix NULL pointer dereference") moved tp->root initialization into ->init() routine, where before it was part of ->change(), so ->get() had to deal with tp->root being NULL back then, so that was indeed a valid case, after d3fa76ee6b4a, not really anymore. We used to set tp->root to NULL long ago in ->destroy(), see 47a1a1d4be29 ("pkt_sched: remove unnecessary xchg() in packet classifiers"); but the NULLifying was reintroduced with the RCUification, but it's not correct for every classifier implementation. In the cases that are fixed here with one exception of cls_cgroup, tp->root object is allocated and initialized inside ->init() callback, which is always performed at a point in time after we allocate a new tp, which means tp and thus tp->root was not globally visible in the tp chain yet (see tc_ctl_tfilter()). Also, on destruction tp->root is strictly kfree_rcu()'ed in ->destroy() handler, same for the tp which is kfree_rcu()'ed right when we return from ->destroy() in tcf_destroy(). This means, the head object's lifetime for such classifiers is always tied to the tp lifetime. The RCU callback invocation for the two kfree_rcu() could be out of order, but that's fine since both are independent. Dropping the RCU_INIT_POINTER(tp->root, NULL) for these classifiers here means that 1) we don't need a useless NULL check in fast-path and, 2) that outstanding readers of that tp in tc_classify() can still execute under respect with RCU grace period as it is actually expected. Things that haven't been touched here: cls_fw and cls_route. They each handle tp->root being NULL in ->classify() path for historic reasons, so their ->destroy() implementation can stay as is. If someone actually cares, they could get cleaned up at some point to avoid the test in fast path. cls_u32 doesn't set tp->root to NULL. For cls_rsvp, I just added a !head should anyone actually be using/testing it, so it at least aligns with cls_fw and cls_route. For cls_flower we additionally need to defer rhashtable destruction (to a sleepable context) after RCU grace period as concurrent readers might still access it. (Note that in this case we need to hold module reference to keep work callback address intact, since we only wait on module unload for all call_rcu()s to finish.) This fixes one race to bring RCU grace period guarantees back. Next step as worked on by Cong however is to fix 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") to get the order of unlinking the tp in tc_ctl_tfilter() for the RTM_DELTFILTER case right by moving RCU_INIT_POINTER() before tcf_destroy() and let the notification for removal be done through the prior ->delete() callback. Both are independant issues. Once we have that right, we can then clean tp->root up for a number of classifiers by not making them RCU pointers, which requires a new callback (->uninit) that is triggered from tp's RCU callback, where we just kfree() tp->root from there. Fixes: 1f947bf151e9 ("net: sched: rcu'ify cls_bpf") Fixes: 9888faefe132 ("net: sched: cls_basic use RCU") Fixes: 70da9f0bf999 ("net: sched: cls_flow use RCU") Fixes: 77b9900ef53a ("tc: introduce Flower classifier") Fixes: bf3994d2ed31 ("net/sched: introduce Match-all classifier") Fixes: 952313bd6258 ("net: sched: cls_cgroup use RCU") Reported-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Roi Dayan <roid@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28rtl8xxxu: tx rate reported before setBarry Day
Move the dev_info call that attempts to show the rate used before it is set. Signed-off-by: Barry Day <briselec@gmail.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Barry Day <briselec@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-28powerpc/boot: Fix build failure in 32-bit boot wrapperBen Hutchings
OPAL is not callable from 32-bit mode and the assembly code for it may not even build (depending on how binutils was configured). References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=powerpcspe&ver=4.8.7-1&stamp=1479203712 Fixes: 656ad58ef19e ("powerpc/boot: Add OPAL console to epapr wrappers") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-15 08:27:36 +0000