summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-01wil6210: delay remain on channel when scan is activeLior David
Currently it was possible to call remain_on_channel(ROC) while scan was active and this caused a crash in the FW. In order to fix this problem and make the behavior consistent with other drivers, queue the ROC in case a scan is active and try it again when scan is done. As part of the fix, clean up some locking issues and return error if scan is called while ROC is active. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath9k_htc: don't use HZ for usb msg timeoutsAnthony Romano
The usb_*_msg() functions expect a timeout in msecs but are given HZ, which is ticks per second. If HZ=100, firmware download often times out when there is modest USB utilization and the device fails to initialize. Replaces HZ in usb_*_msg timeouts with 1000 msec since HZ is one second for timeouts in jiffies. Signed-off-by: Anthony Romano <anthony.romano@coreos.com> Acked-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath9k: constify ath_bus_ops structureBhumika Goyal
Declare the structure ath_bus_ops as const as it is only passed as an argument to the function ath9k_init_device. This argument is of type const struct ath_bus_ops *, so ath_bus_ops structures with this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct ath_bus_ops i@p = {...}; @ok1@ identifier r1.i; position p; expression e1,e2; @@ ath9k_init_device(e1,e2,&i@p) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct ath_bus_ops i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct ath_bus_ops i; File size before: text data bss dec hex filename 1295 232 0 1527 5f7 ath/ath9k/ahb.o File size after: text data bss dec hex filename 1359 176 0 1535 5ff ath/ath9k/ahb.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: wmi-alloc-chunk should use DMA_BIDIRECTIONALBen Greear
These memory chunks are often used as 'swap' by the NIC, so it will be both reading and writing to these areas. This seems to fix errors like this on my x86-64 machine: kernel: DMAR: DMAR:[DMA Write] Request device [05:00.0] fault addr ff5de000 DMAR:[fault reason 05] PTE Write access is not set Tested-by: Marek Behun <kabel@blackhole.sk> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: fix Tx DMA alloc failure during continuous wifi down/upMohammed Shafi Shajakhan
With maximum number of vap's configured in a two radio supported systems of ~256 Mb RAM, doing a continuous wifi down/up and intermittent traffic streaming from the connected stations results in failure to allocate contiguous memory for tx buffers. This results in the disappearance of all VAP's and a manual reboot is needed as this is not a crash (or) OOM(for OOM killer to be invoked). To address this allocate contiguous memory for tx buffers one time and re-use them until the modules are unloaded but this results in a slight increase in memory footprint of ath10k when the wifi is down, but the modules are still loaded. Also as of now we use a separate bool 'tx_mem_allocated' to keep track of the one time memory allocation, as we cannot come up with something like 'ath10k_tx_{register,unregister}' before 'ath10k_probe_fw' is called as 'ath10k_htt_tx_alloc_cont_frag_desc' memory allocation is dependent on the hw_param 'continuous_frag_desc' a) memory footprint of ath10k without the change lsmod | grep ath10k ath10k_core 414498 1 ath10k_pci ath10k_pci 38236 0 b) memory footprint of ath10k with the change ath10k_core 414980 1 ath10k_pci ath10k_pci 38236 0 Memory Failure Call trace: hostapd: page allocation failure: order:6, mode:0xd0 [<c021f150>] (__dma_alloc_buffer.isra.23) from [<c021f23c>] (__alloc_remap_buffer.isra.26+0x14/0xb8) [<c021f23c>] (__alloc_remap_buffer.isra.26) from [<c021f664>] (__dma_alloc+0x224/0x2b8) [<c021f664>] (__dma_alloc) from [<c021f810>] (arm_dma_alloc+0x84/0x90) [<c021f810>] (arm_dma_alloc) from [<bf954764>] (ath10k_htt_tx_alloc+0xe0/0x2e4 [ath10k_core]) [<bf954764>] (ath10k_htt_tx_alloc [ath10k_core]) from [<bf94e6ac>] (ath10k_core_start+0x538/0xcf8 [ath10k_core]) [<bf94e6ac>] (ath10k_core_start [ath10k_core]) from [<bf947eec>] (ath10k_start+0xbc/0x56c [ath10k_core]) [<bf947eec>] (ath10k_start [ath10k_core]) from [<bf8a7a04>] (drv_start+0x40/0x5c [mac80211]) [<bf8a7a04>] (drv_start [mac80211]) from [<bf8b7cf8>] (ieee80211_do_open+0x170/0x82c [mac80211]) [<bf8b7cf8>] (ieee80211_do_open [mac80211]) from [<c056afc8>] (__dev_open+0xa0/0xf4) [21053.491752] Normal: 641*4kB (UEMR) 505*8kB (UEMR) 330*16kB (UEMR) 126*32kB (UEMR) 762*64kB (UEMR) 237*128kB (UEMR) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 95276kB Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: fix soft lockup during firmware crash/hw-restartMohammed Shafi Shajakhan
During firmware crash (or) user requested manual restart the system gets into a soft lock up state because of the below root cause. During user requested hardware restart / firmware crash the system goes into a soft lockup state as 'napi_synchronize' is called after 'napi_disable' (which sets 'NAPI_STATE_SCHED' bit) and it sleeps into infinite loop as it waits for 'NAPI_STATE_SCHED' to be cleared. This condition is hit because 'ath10k_hif_stop' is called twice as below (resulting in calling 'napi_synchronize' after 'napi_disable') 'ath10k_core_restart' -> 'ath10k_hif_stop' (ATH10K_STATE_ON) -> -> 'ieee80211_restart_hw' -> 'ath10k_start' -> 'ath10k_halt' -> 'ath10k_core_stop' -> 'ath10k_hif_stop' (ATH10K_STATE_RESTARTING) Fix this by calling 'ath10k_halt' in ath10k_core_restart itself as it makes more sense before informing mac80211 to restart h/w Also remove 'ath10k_halt' in ath10k_start for the state of 'restarting' Fixes: 3c97f5de1f28 ("ath10k: implement NAPI support") Cc: <stable@vger.kernel.org> # v4.9 Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: fix TLV set regdomain commandErik Stromdahl
There is a typo bug in the current implementation of ath10k_wmi_tlv_op_gen_pdev_set_rd. The conformance test limits are not set up properly. The two arguments ctl2g and ctl5g were not used at all. Instead, the regdomain arguments rd2g and rd5g were used for the ctl settings as well. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath9k: feed only active spectral / dfs-detectorZefir Kurtisi
Radar pulse and spectral scan reports are provided by the HW with the ATH9K_RXERR_PHY flag set. Those are forwarded to the dfs-detector and spectral module for further processing. For some older chips, the pre-conditions checked in those modules are ambiguous, since ATH9K_PHYERR_RADAR is used to tag both types. As a result, spectral frames are fed into the dfs-detector and vice versa. This could lead to a false radar detection on a non-DFS channel (which is uncritical), but more relevant it causes useless CPU load for processing invalid frames. This commit ensures that the dfs-detector and spectral collector are only fed when they are active. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-30Merge branch 'silvio' into docs-nextJonathan Corbet
2016-11-30Documentation/atomic_ops.txt: convert to ReST markupSilvio Fricke
... and move to core-api folder. Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30Documentation/local_ops.txt: convert to ReST markupSilvio Fricke
... and move to core-api folder. Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30Documentation/assoc_array.txt: convert to ReST markupSilvio Fricke
... and move to Documentation/core-api folder. Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: fix false-positive WARN_ON() in truncate/invalidate for hugetlb kasan: support use-after-scope detection kasan: update kasan_global for gcc 7 lib/debugobjects: export for use in modules zram: fix unbalanced idr management at hot removal thp: fix corner case of munlock() of PTE-mapped THPs mm, thp: propagation of conditional compilation in khugepaged.c
2016-11-30mm: fix false-positive WARN_ON() in truncate/invalidate for hugetlbKirill A. Shutemov
Hugetlb pages have ->index in size of the huge pages (PMD_SIZE or PUD_SIZE), not in PAGE_SIZE as other types of pages. This means we cannot user page_to_pgoff() to check whether we've got the right page for the radix-tree index. Let's introduce page_to_index() which would return radix-tree index for given page. We will be able to get rid of this once hugetlb will be switched to multi-order entries. Fixes: fc127da085c2 ("truncate: handle file thp") Link: http://lkml.kernel.org/r/20161123093053.mjbnvn5zwxw5e6lk@black.fi.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Doug Nelson <doug.nelson@intel.com> Tested-by: Doug Nelson <doug.nelson@intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-30kasan: support use-after-scope detectionDmitry Vyukov
Gcc revision 241896 implements use-after-scope detection. Will be available in gcc 7. Support it in KASAN. Gcc emits 2 new callbacks to poison/unpoison large stack objects when they go in/out of scope. Implement the callbacks and add a test. [dvyukov@google.com: v3] Link: http://lkml.kernel.org/r/1479998292-144502-1-git-send-email-dvyukov@google.com Link: http://lkml.kernel.org/r/1479226045-145148-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-30kasan: update kasan_global for gcc 7Dmitry Vyukov
kasan_global struct is part of compiler/runtime ABI. gcc revision 241983 has added a new field to kasan_global struct. Update kernel definition of kasan_global struct to include the new field. Without this patch KASAN is broken with gcc 7. Link: http://lkml.kernel.org/r/1479219743-28682-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-30lib/debugobjects: export for use in modulesChris Wilson
Drivers, or other modules, that use a mixture of objects (especially objects embedded within other objects) would like to take advantage of the debugobjects facilities to help catch misuse. Currently, the debugobjects interface is only available to builtin drivers and requires a set of EXPORT_SYMBOL_GPL for use by modules. I am using the debugobjects in i915.ko to try and catch some invalid operations on embedded objects. The problem currently only presents itself across module unload so forcing i915 to be builtin is not an option. Link: http://lkml.kernel.org/r/20161122143039.6433-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Du, Changbin" <changbin.du@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-30zram: fix unbalanced idr management at hot removalTakashi Iwai
The zram hot removal code calls idr_remove() even when zram_remove() returns an error (typically -EBUSY). This results in a leftover at the device release, eventually leading to a crash when the module is reloaded. As described in the bug report below, the following procedure would cause an Oops with zram: - provision three zram devices via modprobe zram num_devices=3 - configure a size for each device + echo "1G" > /sys/block/$zram_name/disksize - mkfs and mount zram0 only - attempt to hot remove all three devices + echo 2 > /sys/class/zram-control/hot_remove + echo 1 > /sys/class/zram-control/hot_remove + echo 0 > /sys/class/zram-control/hot_remove - zram0 removal fails with EBUSY, as expected - unmount zram0 - try zram0 hot remove again + echo 0 > /sys/class/zram-control/hot_remove - fails with ENODEV (unexpected) - unload zram kernel module + completes successfully - zram0 device node still exists - attempt to mount /dev/zram0 + mount command is killed + following BUG is encountered BUG: unable to handle kernel paging request at ffffffffa0002ba0 IP: get_disk+0x16/0x50 Oops: 0000 [#1] SMP CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176 Call Trace: exact_lock+0xc/0x20 kobj_lookup+0xdc/0x160 get_gendisk+0x2f/0x110 __blkdev_get+0x10c/0x3c0 blkdev_get+0x19d/0x2e0 blkdev_open+0x56/0x70 do_dentry_open.isra.19+0x1ff/0x310 vfs_open+0x43/0x60 path_openat+0x2c9/0xf30 do_filp_open+0x79/0xd0 do_sys_open+0x114/0x1e0 SyS_open+0x19/0x20 entry_SYSCALL_64_fastpath+0x13/0x94 This patch adds the proper error check in hot_remove_store() not to call idr_remove() unconditionally. Fixes: 17ec4cd98578 ("zram: don't call idr_remove() from zram_remove()") Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1010970 Link: http://lkml.kernel.org/r/20161121132140.12683-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: David Disseldorp <ddiss@suse.de> Reported-by: David Disseldorp <ddiss@suse.de> Tested-by: David Disseldorp <ddiss@suse.de> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> [4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-30thp: fix corner case of munlock() of PTE-mapped THPsKirill A. Shutemov
The following program triggers BUG() in munlock_vma_pages_range(): // autogenerated by syzkaller (http://github.com/google/syzkaller) #include <sys/mman.h> int main() { mmap((void*)0x20105000ul, 0xc00000ul, 0x2ul, 0x2172ul, -1, 0); mremap((void*)0x201fd000ul, 0x4000ul, 0xc00000ul, 0x3ul, 0x203f0000ul); return 0; } The test-case constructs the situation when munlock_vma_pages_range() finds PTE-mapped THP-head in the middle of page table and, by mistake, skips HPAGE_PMD_NR pages after that. As result, on the next iteration it hits the middle of PMD-mapped THP and gets upset seeing mlocked tail page. The solution is only skip HPAGE_PMD_NR pages if the THP was mlocked during munlock_vma_page(). It would guarantee that the page is PMD-mapped as we never mlock PTE-mapeed THPs. Fixes: e90309c9f772 ("thp: allow mlocked THP again") Link: http://lkml.kernel.org/r/20161115132703.7s7rrgmwttegcdh4@black.fi.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: syzkaller <syzkaller@googlegroups.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-30mm, thp: propagation of conditional compilation in khugepaged.cJérémy Lefaure
Commit b46e756f5e47 ("thp: extract khugepaged from mm/huge_memory.c") moved code from huge_memory.c to khugepaged.c. Some of this code should be compiled only when CONFIG_SYSFS is enabled but the condition around this code was not moved into khugepaged.c. The result is a compilation error when CONFIG_SYSFS is disabled: mm/built-in.o: In function `khugepaged_defrag_store': khugepaged.c:(.text+0x2d095): undefined reference to `single_hugepage_flag_store' mm/built-in.o: In function `khugepaged_defrag_show': khugepaged.c:(.text+0x2d0ab): undefined reference to `single_hugepage_flag_show' This commit adds the #ifdef CONFIG_SYSFS around the code related to sysfs. Link: http://lkml.kernel.org/r/20161114203448.24197-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-30docs-rst: parse-headers.pl: cleanup the documentationMauro Carvalho Chehab
Keeping both rst and in-file documentation in sync can be harsh. So, simplify the script's internal documntation to a bare minimum, and add a mention to the ReST file with its full documentation. This way, a quick help is still available at the command line, while the complete one is maintained at the ReST format. As we won't be using pad2rst anymore, do a cleanup at the ReST file. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: fix media cleandocs targetMauro Carvalho Chehab
The builddir prefix was missing on make cleandocs. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: media/Makefile: reorganize the rulesMauro Carvalho Chehab
Better organize the media/Makefile, in order to better split what's related to image conversion from the ones related to parse-headers.pl. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: media: build SVG from graphviz filesMauro Carvalho Chehab
Instead of keeping both SVG and graphviz files, dynamically build SVG from its graphviz sources. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: replace bayer.png by a SVG imageMauro Carvalho Chehab
SVG images are scalable, with makes easier to output on different formats. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: replace the selection.png by a SVG imageMauro Carvalho Chehab
bitmap images don't scale too well. So, replace it by a SVG image, written in inkscape. I'm using the 2009's temporary logo.svg image from 8032b526d1a3 ("linux.conf.au 2009: Tuz"), with a Tasmanian Devil wearing a tux mask. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: convert pipeline to SVG formatMauro Carvalho Chehab
The pipeline image was produced from some dot file that has long missed. Create a pipeline.dot with the graph and convert it to SVG. As we're planning to add future support for graphviz graphics, also store the .dot file on the tree, as this will make easier when we add such Sphinx extension. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30docs-rst: nv12mt zigzag images: replace by SVG imagesMauro Carvalho Chehab
Instead of using bitmap images to show the zigzag macroblock parsing, replace it by a SVG ones, with is scalable. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30svg files: cleanup themMauro Carvalho Chehab
Use sans-serif font on all documents, split text lines, ungroup elements, and do other misc cleanups, in order to make all of them to look better, and to have smaller columns inside their lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-11-30convert more media images to SVGMauro Carvalho Chehab
Using vectorial graphics provide a better visual. As those images are originally using a vectorial graphics input at the pdf files, use them, from an old media tree repository, converting them to SVG. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-01Merge tag 'drm-misc-fixes-2016-11-30' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes single drm fix. * tag 'drm-misc-fixes-2016-11-30' of git://anongit.freedesktop.org/git/drm-misc: drm: Don't call drm_for_each_crtc with a non-KMS driver
2016-11-30Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two small fixes for MIPI PLLs on sunxi devices and a build fix for a Broadcom clk driver having unmet dependencies" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XX clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock clk: sunxi-ng: sun6i-a31: Enable PLL-MIPI LDOs when ungating it
2016-11-30arm64: dts: juno: Correct PCI IO windowJeremy Linton
The PCIe root complex on Juno translates the MMIO mapped at 0x5f800000 to the PIO address range starting at 0 (which is common because PIO addresses are generally < 64k). Correct the DT to reflect this. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30macvtap: handle ubuf refcount correctly when meet errorsJason Wang
We trigger uarg->callback() immediately after we decide do datacopy even if caller want to do zerocopy. This will cause the callback (vhost_net_zerocopy_callback) decrease the refcount. But when we meet an error afterwards, the error handling in vhost handle_tx() will try to decrease it again. This is wrong and fix this by delay the uarg->callback() until we're sure there's no errors. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30tun: handle ubuf refcount correctly when meet errorsJason Wang
We trigger uarg->callback() immediately after we decide do datacopy even if caller want to do zerocopy. This will cause the callback (vhost_net_zerocopy_callback) decrease the refcount. But when we meet an error afterwards, the error handling in vhost handle_tx() will try to decrease it again. This is wrong and fix this by delay the uarg->callback() until we're sure there's no errors. Reported-by: wangyunjian <wangyunjian@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30driver: ipvlan: Remove useless member mtu_adj of struct ipvl_devGao Feng
The mtu_adj is initialized to zero when alloc mem, there is no any assignment to mtu_adj. It is only used in ipvlan_adjust_mtu as one right value. So it is useless member of struct ipvl_dev, then remove it. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during resumeGrygorii Strashko
netif_set_real_num_tx/rx_queues() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend: cpsw_resume() |- cpsw_ndo_open() |- netif_set_real_num_tx/rx_queues() |- ASSERT_RTNL(); Hence, fix it by surrounding cpsw_ndo_open() by rtnl_lock/unlock() calls. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Fixes: commit e05107e6b747 ("net: ethernet: ti: cpsw: add multi queue support") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30ethernet :mellanox :mlx5: Replace pci_pool_alloc by pci_pool_zallocSouptick Joarder
In alloc_cmd_box(), pci_pool_alloc() followed by memset will be replaced by pci_pool_zalloc() Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30ethernet :mellanox :mlx4: Replace pci_pool_alloc by pci_pool_zallocSouptick Joarder
In mlx4_alloc_cmd_mailbox(), pci_pool_alloc() followed by memset will be replaced by pci_pool_zalloc() Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ipv4: Don't crash if passing a null sk to ip_rt_update_pmtu.Lorenzo Colitti
Commit e2d118a1cb5e ("net: inet: Support UID-based routing in IP protocols.") made __build_flow_key call sock_net(sk) to determine the network namespace of the passed-in socket. This crashes if sk is NULL. Fix this by getting the network namespace from the skb instead. Fixes: e2d118a1cb5e ("net: inet: Support UID-based routing in IP protocols.") Reported-by: Erez Shitrit <erezsh@dev.mellanox.co.il> Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30Merge tag 'pwm/for-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "This contains two one-line fixes for issues that were introduced in v4.9-rc1" * tag 'pwm/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix device reference leak pwm: meson: Add missing spin_lock_init()
2016-11-30bpf: add test for the verifier equal logic bugJosef Bacik
This is a test to verify that bpf: fix states equal logic for varlen access actually fixed the problem. The problem was if the register we added to our map register was UNKNOWN in both the false and true branches and the only thing that changed was the range then we'd incorrectly assume that the true branch was valid, which it really wasnt. This tests this case and properly fails without my fix in place and passes with it in place. Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30bpf: fix states equal logic for varlen accessJosef Bacik
If we have a branch that looks something like this int foo = map->value; if (condition) { foo += blah; } else { foo = bar; } map->array[foo] = baz; We will incorrectly assume that the !condition branch is equal to the condition branch as the register for foo will be UNKNOWN_VALUE in both cases. We need to adjust this logic to only do this if we didn't do a varlen access after we processed the !condition branch, otherwise we have different ranges and need to check the other branch as well. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30netfilter: arp_tables: fix invoking 32bit "iptable -P INPUT ACCEPT" failed ↵Hongxu Jia
in 64bit kernel Since 09d9686047db ("netfilter: x_tables: do compat validation via translate_table"), it used compatr structure to assign newinfo structure. In translate_compat_table of ip_tables.c and ip6_tables.c, it used compatr->hook_entry to replace info->hook_entry and compatr->underflow to replace info->underflow, but not do the same replacement in arp_tables.c. It caused invoking 32-bit "arptbale -P INPUT ACCEPT" failed in 64bit kernel. -------------------------------------- root@qemux86-64:~# arptables -P INPUT ACCEPT root@qemux86-64:~# arptables -P INPUT ACCEPT ERROR: Policy for `INPUT' offset 448 != underflow 0 arptables: Incompatible with this kernel -------------------------------------- Fixes: 09d9686047db ("netfilter: x_tables: do compat validation via translate_table") Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-11-30Merge branch 'cpsw-per-channel-shaping'David S. Miller
Ivan Khoronzhuk says: ==================== cpsw: add per channel shaper configuration This series is intended to allow user to set rate for per channel shapers at cpdma level. This patchset doesn't have impact on performance. The rate can be set with: echo 100 > /sys/class/net/ethX/queues/tx-0/tx_maxrate Tested on am572xx Based on net-next/master ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: cpsw: split tx budget according between channelsIvan Khoronzhuk
Split device budget between channels according to channel rate. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: cpsw: optimize end of poll cycleIvan Khoronzhuk
Check budget fullness only after it's updated and update channel mask only once to keep budget balance between channels. It's also needed for farther changes. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: cpsw: add .ndo to set per-queue rateIvan Khoronzhuk
This patch allows to rate limit queues tx queues for cpsw interface. The rate is set in absolute Mb/s units and cannot be more a speed an interface is connected with. The rate for a tx queue can be tested with: ethtool -L eth0 rx 4 tx 4 echo 100 > /sys/class/net/eth0/queues/tx-0/tx_maxrate echo 200 > /sys/class/net/eth0/queues/tx-1/tx_maxrate echo 50 > /sys/class/net/eth0/queues/tx-2/tx_maxrate echo 30 > /sys/class/net/eth0/queues/tx-3/tx_maxrate tc qdisc add dev eth0 root handle 1: multiq tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5001 0xffff action skbedit queue_mapping 0 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5002 0xffff action skbedit queue_mapping 1 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5003 0xffff action skbedit queue_mapping 2 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5004 0xffff action skbedit queue_mapping 3 iperf -c 192.168.2.1 -b 110M -p 5001 -f m -t 60 iperf -c 192.168.2.1 -b 215M -p 5002 -f m -t 60 iperf -c 192.168.2.1 -b 55M -p 5003 -f m -t 60 iperf -c 192.168.2.1 -b 32M -p 5004 -f m -t 60 Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: davinci_cpdma: add set rate for a channelIvan Khoronzhuk
The cpdma has 8 rate limited tx channels. This patch adds ability for cpdma driver to use 8 tx h/w shapers. If at least one channel is not rate limited then it must have higher number, this is because the rate limited channels have to have higher priority then not rate limited channels. The channel priority is set in low-hi direction already, so that when a new channel is added with ethtool and it doesn't have rate yet, it cannot affect on rate limited channels. It can be useful for TSN streams and just in cases when h/w rate limited channels are needed. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: davinci_cpdma: add weight function for channelsIvan Khoronzhuk
The weight of a channel is needed to split descriptors between channels. The weight can depend on maximum rate of channels, maximum rate of an interface or other reasons. The channel weight is in percentage and is independent for rx and tx channels. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 09:59:51 +0000