summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-13Merge branch 'gre-fix-regressions-in-ipv6-link-local-address-generation'Paolo Abeni
Guillaume Nault says: ==================== gre: Fix regressions in IPv6 link-local address generation. IPv6 link-local address generation has some special cases for GRE devices. This has led to several regressions in the past, and some of them are still not fixed. This series fixes the remaining problems, like the ipv6.conf.<dev>.addr_gen_mode sysctl being ignored and the router discovery process not being started (see details in patch 1). To avoid any further regressions, patch 2 adds selftests covering IPv4 and IPv6 gre/gretap devices with all combinations of currently supported addr_gen_mode values. ==================== Link: https://patch.msgid.link/cover.1741375285.git.gnault@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13selftests: Add IPv6 link-local address generation tests for GRE devices.Guillaume Nault
GRE devices have their special code for IPv6 link-local address generation that has been the source of several regressions in the past. Add selftest to check that all gre, ip6gre, gretap and ip6gretap get an IPv6 link-link local address in accordance with the net.ipv6.conf.<dev>.addr_gen_mode sysctl. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/2d6772af8e1da9016b2180ec3f8d9ee99f470c77.1741375285.git.gnault@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13gre: Fix IPv6 link-local address generation.Guillaume Nault
Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE devices in most cases and fall back to using add_v4_addrs() only in case the GRE configuration is incompatible with addrconf_addr_gen(). GRE used to use addrconf_addr_gen() until commit e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") restricted this use to gretap and ip6gretap devices, and created add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones. The original problem came when commit 9af28511be10 ("addrconf: refuse isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its addr parameter was 0. The commit says that this would create an invalid address, however, I couldn't find any RFC saying that the generated interface identifier would be wrong. Anyway, since gre over IPv4 devices pass their local tunnel address to __ipv6_isatap_ifid(), that commit broke their IPv6 link-local address generation when the local address was unspecified. Then commit e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") tried to fix that case by defining add_v4_addrs() and calling it to generate the IPv6 link-local address instead of using addrconf_addr_gen() (apart for gretap and ip6gretap devices, which would still use the regular addrconf_addr_gen(), since they have a MAC address). That broke several use cases because add_v4_addrs() isn't properly integrated into the rest of IPv6 Neighbor Discovery code. Several of these shortcomings have been fixed over time, but add_v4_addrs() remains broken on several aspects. In particular, it doesn't send any Router Sollicitations, so the SLAAC process doesn't start until the interface receives a Router Advertisement. Also, add_v4_addrs() mostly ignores the address generation mode of the interface (/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases. Fix the situation by using add_v4_addrs() only in the specific scenario where the normal method would fail. That is, for interfaces that have all of the following characteristics: * run over IPv4, * transport IP packets directly, not Ethernet (that is, not gretap interfaces), * tunnel endpoint is INADDR_ANY (that is, 0), * device address generation mode is EUI64. In all other cases, revert back to the regular addrconf_addr_gen(). Also, remove the special case for ip6gre interfaces in add_v4_addrs(), since ip6gre devices now always use addrconf_addr_gen() instead. Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/559c32ce5c9976b269e6337ac9abb6a96abe5096.1741375285.git.gnault@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13netfilter: nft_exthdr: fix offset with ipv4_find_option()Alexey Kashavkin
There is an incorrect calculation in the offset variable which causes the nft_skb_copy_to_reg() function to always return -EFAULT. Adding the start variable is redundant. In the __ip_options_compile() function the correct offset is specified when finding the function. There is no need to add the size of the iphdr structure to the offset. Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options") Signed-off-by: Alexey Kashavkin <akashavkin@gmail.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-03-13fs: use debug-only asserts around fd allocation and installMateusz Guzik
This also restores the check which got removed in 52732bb9abc9ee5b ("fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()") for performance reasons -- they no longer apply with a debug-only variant. Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Link: https://lore.kernel.org/r/20250312161941.1261615-1-mjguzik@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-03-13reset: mchp: sparx5: Fix for lan966xHoratiu Vultur
With the blamed commit it seems that lan966x doesn't seem to boot anymore when the internal CPU is used. The reason seems to be the usage of the devm_of_iomap, if we replace this with devm_ioremap, this seems to fix the issue as we use the same region also for other devices. Fixes: 0426a920d6269c ("reset: mchp: sparx5: Map cpu-syscon locally in case of LAN966x") Reviewed-by: Herve Codina <herve.codina@bootlin.com> Tested-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20250227105502.25125-1-horatiu.vultur@microchip.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-03-13drm/sched: Fix fence reference count leakqianyi liu
The last_scheduled fence leaks when an entity is being killed and adding the cleanup callback fails. Decrement the reference count of prev when dma_fence_add_callback() fails, ensuring proper balance. Cc: stable@vger.kernel.org # v6.2+ [phasta: add git tag info for stable kernel] Fixes: 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini") Signed-off-by: qianyi liu <liuqianyi125@gmail.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250311060251.4041101-1-liuqianyi125@gmail.com
2025-03-13gpio: cdev: use raw notifier for line state eventsBartosz Golaszewski
We use a notifier to implement the mechanism of informing the user-space about changes in GPIO line status. We register with the notifier when the GPIO character device file is opened and unregister when the last reference to the associated file descriptor is dropped. Since commit fcc8b637c542 ("gpiolib: switch the line state notifier to atomic") we use the atomic notifier variant. Atomic notifiers call rcu_synchronize in atomic_notifier_chain_unregister() which caused a significant performance regression in some circumstances, observed by user-space when calling close() on the GPIO device file descriptor. Replace the atomic notifier with the raw variant and provide synchronization with a read-write spinlock. Fixes: fcc8b637c542 ("gpiolib: switch the line state notifier to atomic") Reported-by: David Jander <david@protonic.nl> Closes: https://lore.kernel.org/all/20250311110034.53959031@erd003.prtnl/ Tested-by: David Jander <david@protonic.nl> Tested-by: Kent Gibson <warthog618@gmail.com> Link: https://lore.kernel.org/r/20250311-gpiolib-line-state-raw-notifier-v2-1-138374581e1e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-03-13gpiolib: don't check the retval of get_direction() when registering a chipBartosz Golaszewski
During chip registration we should neither check the return value of gc->get_direction() nor hold the SRCU lock when calling it. The former is because pin controllers may have pins set to alternate functions and return errors from their get_direction() callbacks. That's alright - we should default to the safe INPUT state and not bail-out. The latter is not needed because we haven't registered the chip yet so there's nothing to protect against dynamic removal. In fact: we currently hit a lockdep splat. Revert to calling the gc->get_direction() callback directly and *not* checking its value. Fixes: 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/all/81f890fc-6688-42f0-9756-567efc8bb97a@samsung.com/ Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-1-c8dc57182441@linaro.org Tested-by: Gene C <arch@sapience.com> Link: https://lore.kernel.org/r/20250311175631.83779-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-03-13Merge tag 'asoc-fix-v6.14-rc6' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.14 The bulk of this is driver specific fixes, mostly unremarkable. There's also one core fix from Charles, fixing up confusion around the limiting of maximum control values.
2025-03-13bcachefs: fix tiny leak in bch2_dev_add()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-03-12Merge tag 'sched_ext-for-6.14-rc6-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fix from Tejun Heo: "BPF schedulers could trigger a crash by passing in an invalid CPU to the scx_bpf_select_cpu_dfl() helper. Fix it by verifying input validity" * tag 'sched_ext-for-6.14-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl()
2025-03-12Merge tag 'spi-fix-v6.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of driver specific fixes, an error handling fix for the Atmel QuadSPI driver and a fix for a nasty synchronisation issue in the data path for the Microchip driver which affects larger transfers. There's also a MAINTAINERS update for the Samsung driver" * tag 'spi-fix-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: microchip-core: prevent RX overflows when transmit size > FIFO size MAINTAINERS: add tambarus as R for Samsung SPI spi: atmel-quadspi: remove references to runtime PM on error path
2025-03-12Merge branch 'net_sched-prevent-creation-of-classes-with-tc_h_root'Jakub Kicinski
Cong Wang says: ==================== net_sched: Prevent creation of classes with TC_H_ROOT This patchset contains a bug fix and its TDC test case. ==================== Link: https://patch.msgid.link/20250306232355.93864-1-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12selftests/tc-testing: Add a test case for DRR class with TC_H_ROOTCong Wang
Integrate the reproduer from Mingi to TDC. All test results: 1..4 ok 1 0385 - Create DRR with default setting ok 2 2375 - Delete DRR with handle ok 3 3092 - Show DRR class ok 4 4009 - Reject creation of DRR class with classid TC_H_ROOT Cc: Mingi Cho <mincho@theori.io> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306232355.93864-3-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12net_sched: Prevent creation of classes with TC_H_ROOTCong Wang
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination condition when traversing up the qdisc tree to update parent backlog counters. However, if a class is created with classid TC_H_ROOT, the traversal terminates prematurely at this class instead of reaching the actual root qdisc, causing parent statistics to be incorrectly maintained. In case of DRR, this could lead to a crash as reported by Mingi Cho. Prevent the creation of any Qdisc class with classid TC_H_ROOT (0xFFFFFFFF) across all qdisc types, as suggested by Jamal. Reported-by: Mingi Cho <mincho@theori.io> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop") Link: https://patch.msgid.link/20250306232355.93864-2-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12drm/amdgpu: NULL-check BO's backing store when determining GFX12 PTE flagsNatalie Vock
PRT BOs may not have any backing store, so bo->tbo.resource will be NULL. Check for that before dereferencing. Fixes: 0cce5f285d9a ("drm/amdkfd: Check correct memory types for is_system variable") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Natalie Vock <natalie.vock@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3e3fcd29b505cebed659311337ea03b7698767fc) Cc: stable@vger.kernel.org # 6.12.x
2025-03-12drm/amd/amdkfd: Evict all queues even HWS remove queue failedYifan Zha
[Why] If reset is detected and kfd need to evict working queues, HWS moving queue will be failed. Then remaining queues are not evicted and in active state. After reset done, kfd uses HWS to termination remaining activated queues but HWS is resetted. So remove queue will be failed again. [How] Keep removing all queues even if HWS returns failed. It will not affect cpsch as it checks reset_domain->sem. v2: If any queue failed, evict queue returns error. v3: Declare err inside the if-block. Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 42c854b8fb0cce512534aa2b7141948e80c6ebb0) Cc: stable@vger.kernel.org
2025-03-12RDMA/hns: Fix wrong value of max_sge_rdJunxian Huang
There is no difference between the sge of READ and non-READ operations in hns RoCE. Set max_sge_rd to the same value as max_send_sge. Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250311084857.3803665-8-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-12RDMA/hns: Fix missing xa_destroy()Junxian Huang
Add xa_destroy() for xarray in driver. Fixes: 5c1f167af112 ("RDMA/hns: Init SRQ table for hip08") Fixes: 27e19f451089 ("RDMA/hns: Convert cq_table to XArray") Fixes: 736b5a70db98 ("RDMA/hns: Convert qp_table_tree to XArray") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250311084857.3803665-7-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-12RDMA/hns: Fix a missing rollback in error path of hns_roce_create_qp_common()Junxian Huang
When ib_copy_to_udata() fails in hns_roce_create_qp_common(), hns_roce_qp_remove() should be called in the error path to clean up resources in hns_roce_qp_store(). Fixes: 0f00571f9433 ("RDMA/hns: Use new SQ doorbell register for HIP09") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250311084857.3803665-6-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-12RDMA/hns: Fix invalid sq params not being blockedJunxian Huang
SQ params from userspace are checked in by set_user_sq_size(). But when the check fails, the function doesn't return but instead keep running and overwrite 'ret'. As a result, the invalid params will not get blocked actually. Add a return right after the failed check. Besides, although the check result of kernel sq params will not be overwritten, to keep coding style unified, move default_congest_type() before set_kernel_sq_size(). Fixes: 6ec429d5887a ("RDMA/hns: Support userspace configuring congestion control algorithm with QP granularity") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250311084857.3803665-5-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-12RDMA/hns: Fix unmatched condition in error path of alloc_user_qp_db()Junxian Huang
Currently the condition of unmapping sdb in error path is not exactly the same as the condition of mapping in alloc_user_qp_db(). This may cause a problem of unmapping an unmapped db in some case, such as when the QP is XRC TGT. Unified the two conditions. Fixes: 90ae0b57e4a5 ("RDMA/hns: Combine enable flags of qp") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250311084857.3803665-4-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-12RDMA/hns: Fix soft lockup during bt pages loopJunxian Huang
Driver runs a for-loop when allocating bt pages and mapping them with buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated, it may require a considerable loop count. This will lead to soft lockup: watchdog: BUG: soft lockup - CPU#27 stuck for 22s! ... Call trace: hem_list_alloc_mid_bt+0x124/0x394 [hns_roce_hw_v2] hns_roce_hem_list_request+0xf8/0x160 [hns_roce_hw_v2] hns_roce_mtr_create+0x2e4/0x360 [hns_roce_hw_v2] alloc_mr_pbl+0xd4/0x17c [hns_roce_hw_v2] hns_roce_reg_user_mr+0xf8/0x190 [hns_roce_hw_v2] ib_uverbs_reg_mr+0x118/0x290 watchdog: BUG: soft lockup - CPU#35 stuck for 23s! ... Call trace: hns_roce_hem_list_find_mtt+0x7c/0xb0 [hns_roce_hw_v2] mtr_map_bufs+0xc4/0x204 [hns_roce_hw_v2] hns_roce_mtr_create+0x31c/0x3c4 [hns_roce_hw_v2] alloc_mr_pbl+0xb0/0x160 [hns_roce_hw_v2] hns_roce_reg_user_mr+0x108/0x1c0 [hns_roce_hw_v2] ib_uverbs_reg_mr+0x120/0x2bc Add a cond_resched() to fix soft lockup during these loops. In order not to affect the allocation performance of normal-size buffer, set the loop count of a 100GB MR as the threshold to call cond_resched(). Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250311084857.3803665-3-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-12fsnotify: add pre-content hooks on mmap()Amir Goldstein
Pre-content hooks in page faults introduces potential deadlock of HSM handler in userspace with filesystem freezing. The requirement with pre-content event is that for every accessed file range an event covering at least this range will be generated at least once before the file data is accesses. In preparation to disabling pre-content event hooks on page faults, add pre-content hooks at mmap() variants for the entire mmaped range, so HSM can fill content when user requests to map a portion of the file. Note that exec() variant also calls vm_mmap_pgoff() internally to map code sections, so pre-content hooks are also generated in this case. Link: https://lore.kernel.org/linux-fsdevel/7ehxrhbvehlrjwvrduoxsao5k3x4aw275patsb3krkwuq573yv@o2hskrfawbnc/ Suggested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250312073852.2123409-2-amir73il@gmail.com
2025-03-12USB: serial: ftdi_sio: add support for Altera USB Blaster 3Boon Khai Ng
The Altera USB Blaster 3, available as both a cable and an on-board solution, is primarily used for programming and debugging FPGAs. It interfaces with host software such as Quartus Programmer, System Console, SignalTap, and Nios Debugger. The device utilizes either an FT2232 or FT4232 chip. Enabling the support for various configurations of the on-board USB Blaster 3 by including the appropriate VID/PID pairs, allowing it to function as a serial device via ftdi_sio. Note that this check-in does not include support for the cable solution, as it does not support UART functionality. The supported configurations are determined by the hardware design and include: 1) PID 0x6022, FT2232, 1 JTAG port (Port A) + Port B as UART 2) PID 0x6025, FT4232, 1 JTAG port (Port A) + Port C as UART 3) PID 0x6026, FT4232, 1 JTAG port (Port A) + Port C, D as UART 4) PID 0x6029, FT4232, 1 JTAG port (Port B) + Port C as UART 5) PID 0x602a, FT4232, 1 JTAG port (Port B) + Port C, D as UART 6) PID 0x602c, FT4232, 1 JTAG port (Port A) + Port B as UART 7) PID 0x602d, FT4232, 1 JTAG port (Port A) + Port B, C as UART 8) PID 0x602e, FT4232, 1 JTAG port (Port A) + Port B, C, D as UART These configurations allow for flexibility in how the USB Blaster 3 is used, depending on the specific needs of the hardware design. Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-03-12ASoC: cs42l43: convert to SYSTEM_SLEEP_PM_OPSArnd Bergmann
The custom suspend function causes a build warning when CONFIG_PM_SLEEP is disabled: sound/soc/codecs/cs42l43.c:2405:12: error: unused function 'cs42l43_codec_runtime_force_suspend' [-Werror,-Wunused-function] Change SET_SYSTEM_SLEEP_PM_OPS() to the newer SYSTEM_SLEEP_PM_OPS(), to avoid this. Fixes: 164b7dd4546b ("ASoC: cs42l43: Add jack delay debounce after suspend") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250305172738.3437513-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-12media: rtl2832_sdr: assign vb2 lock before vb2_queue_initHans Verkuil
Commit c780d01cf1a6 ("media: vb2: vb2_core_queue_init(): sanity check lock and wait_prepare/finish") added a sanity check to ensure that if there are no wait_prepare/finish callbacks set by the driver, then the vb2_queue lock must be set, since otherwise the vb2 core cannot do correct locking. The rtl2832_sdr.c triggered this warning: it turns out that while the driver does set this lock, it sets it too late. So move it up to before the vb2_queue_init() call. Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Closes: https://lore.kernel.org/linux-media/20241211042355.8479-1-user@am64/ Fixes: 8fcd2795d22a ("media: rtl2832_sdr: drop vb2_ops_wait_prepare/finish") Cc: stable@vger.kernel.org Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-12ALSA: hda/realtek: Add mute LED quirk for HP Pavilion x360 14-dy1xxxNavon John Lukose
Add a fixup to enable the mute LED on HP Pavilion x360 Convertible 14-dy1xxx with ALC295 codec. The appropriate coefficient index and bits were identified through a brute-force method, as detailed in https://bbs.archlinux.org/viewtopic.php?pid=2079504#p2079504. Signed-off-by: Navon John Lukose <navonjohnlukose@gmail.com> Link: https://patch.msgid.link/20250307213319.35507-1-navonjohnlukose@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-03-12ipvs: prevent integer overflow in do_ip_vs_get_ctl()Dan Carpenter
The get->num_services variable is an unsigned int which is controlled by the user. The struct_size() function ensures that the size calculation does not overflow an unsigned long, however, we are saving the result to an int so the calculation can overflow. Both "len" and "get->num_services" come from the user. This check is just a sanity check to help the user and ensure they are using the API correctly. An integer overflow here is not a big deal. This has no security impact. Save the result from struct_size() type size_t to fix this integer overflow bug. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-03-12selftests: netfilter: skip br_netfilter queue tests if kernel is taintedFlorian Westphal
These scripts fail if the kernel is tainted which leads to wrong test failure reports in CI environments when an unrelated test triggers some splat. Check taint state at start of script and SKIP if its already dodgy. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-03-12netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in ↵Kohei Enju
insert_tree() Since commit b36e4523d4d5 ("netfilter: nf_conncount: fix garbage collection confirm race"), `cpu` and `jiffies32` were introduced to the struct nf_conncount_tuple. The commit made nf_conncount_add() initialize `conn->cpu` and `conn->jiffies32` when allocating the struct. In contrast, count_tree() was not changed to initialize them. By commit 34848d5c896e ("netfilter: nf_conncount: Split insert and traversal"), count_tree() was split and the relevant allocation code now resides in insert_tree(). Initialize `conn->cpu` and `conn->jiffies32` in insert_tree(). BUG: KMSAN: uninit-value in find_or_evict net/netfilter/nf_conncount.c:117 [inline] BUG: KMSAN: uninit-value in __nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143 find_or_evict net/netfilter/nf_conncount.c:117 [inline] __nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143 count_tree net/netfilter/nf_conncount.c:438 [inline] nf_conncount_count+0x82f/0x1e80 net/netfilter/nf_conncount.c:521 connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72 __nft_match_eval net/netfilter/nft_compat.c:403 [inline] nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663 NF_HOOK_LIST include/linux/netfilter.h:350 [inline] ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:669 __netif_receive_skb_list_ptype net/core/dev.c:5936 [inline] __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5983 __netif_receive_skb_list net/core/dev.c:6035 [inline] netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:6126 netif_receive_skb_list+0x5a/0x460 net/core/dev.c:6178 xdp_recv_frames net/bpf/test_run.c:280 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x2e86/0x3480 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0xf1d/0x1ae0 net/bpf/test_run.c:1316 bpf_prog_test_run+0x5e5/0xa30 kernel/bpf/syscall.c:4407 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5813 __do_sys_bpf kernel/bpf/syscall.c:5902 [inline] __se_sys_bpf kernel/bpf/syscall.c:5900 [inline] __ia32_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5900 ia32_sys_call+0x394d/0x4180 arch/x86/include/generated/asm/syscalls_32.h:358 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/common.c:387 do_fast_syscall_32+0x38/0x80 arch/x86/entry/common.c:412 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:450 entry_SYSENTER_compat_after_hwframe+0x84/0x8e Uninit was created at: slab_post_alloc_hook mm/slub.c:4121 [inline] slab_alloc_node mm/slub.c:4164 [inline] kmem_cache_alloc_noprof+0x915/0xe10 mm/slub.c:4171 insert_tree net/netfilter/nf_conncount.c:372 [inline] count_tree net/netfilter/nf_conncount.c:450 [inline] nf_conncount_count+0x1415/0x1e80 net/netfilter/nf_conncount.c:521 connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72 __nft_match_eval net/netfilter/nft_compat.c:403 [inline] nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663 NF_HOOK_LIST include/linux/netfilter.h:350 [inline] ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:669 __netif_receive_skb_list_ptype net/core/dev.c:5936 [inline] __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5983 __netif_receive_skb_list net/core/dev.c:6035 [inline] netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:6126 netif_receive_skb_list+0x5a/0x460 net/core/dev.c:6178 xdp_recv_frames net/bpf/test_run.c:280 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x2e86/0x3480 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0xf1d/0x1ae0 net/bpf/test_run.c:1316 bpf_prog_test_run+0x5e5/0xa30 kernel/bpf/syscall.c:4407 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5813 __do_sys_bpf kernel/bpf/syscall.c:5902 [inline] __se_sys_bpf kernel/bpf/syscall.c:5900 [inline] __ia32_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5900 ia32_sys_call+0x394d/0x4180 arch/x86/include/generated/asm/syscalls_32.h:358 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/common.c:387 do_fast_syscall_32+0x38/0x80 arch/x86/entry/common.c:412 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:450 entry_SYSENTER_compat_after_hwframe+0x84/0x8e Reported-by: syzbot+83fed965338b573115f7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=83fed965338b573115f7 Fixes: b36e4523d4d5 ("netfilter: nf_conncount: fix garbage collection confirm race") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-03-12block: change blk_mq_add_to_batch() third argument type to boolShin'ichiro Kawasaki
Commit 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions") modified the evaluation criteria for the third argument, 'ioerror', in the blk_mq_add_to_batch() function. Initially, the function had checked if 'ioerror' equals zero. Following the commit, it started checking for negative error values, with the presumption that such values, for instance -EIO, would be passed in. However, blk_mq_add_to_batch() callers do not pass negative error values. Instead, they pass status codes defined in various ways: - NVMe PCI and Apple drivers pass NVMe status code - virtio_blk driver passes the virtblk request header status byte - null_blk driver passes blk_status_t These codes are either zero or positive, therefore the revised check fails to function as intended. Specifically, with the NVMe PCI driver, this modification led to the failure of the blktests test case nvme/039. In this test scenario, errors are artificially injected to the NVMe driver, resulting in positive NVMe status codes passed to blk_mq_add_to_batch(), which unexpectedly processes the failed I/O in a batch. Hence the failure. To correct the ioerror check within blk_mq_add_to_batch(), make all callers to uniformly pass the argument as boolean. Modify the callers to check their specific status codes and pass the boolean value 'is_error'. Also describe the arguments of blK_mq_add_to_batch as kerneldoc. Fixes: 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20250311104359.1767728-3-shinichiro.kawasaki@wdc.com [axboe: fold in documentation update] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-12Merge tag 'wireless-2025-03-12' of ↵David S. Miller
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes berg says: ==================== Few more fixes: - cfg80211/mac80211 - stop possible runaway wiphy worker - EHT should not use reserved MPDU size bits - don't run worker for stopped interfaces - fix SA Query processing with MLO - fix lookup of assoc link BSS entries - correct station flush on unauthorize - iwlwifi: - TSO fixes - fix non-MSI-X platforms - stop possible runaway restart worker - rejigger maintainers so I'm not CC'ed on everything ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-12RDMA/bnxt_re: Avoid clearing VLAN_ID mask in modify qp pathSaravanan Vajravel
Driver is always clearing the mask that sets the VLAN ID/Service Level in the adapter. Recent change for supporting multiple traffic class exposed this issue. Allow setting SL and VLAN_ID while QP is moved from INIT to RTR state. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: c64b16a37b6d ("RDMA/bnxt_re: Support different traffic class") Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/1741670196-2919-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-12dma-mapping: fix missing clear bdr in check_ram_in_range_map()Baochen Qiang
As discussed in [1], if 'bdr' is set once, it would never get cleared, hence 0 is always returned. Refactor the range check hunk into a new helper dma_find_range(), which allows 'bdr' to be cleared in each iteration. Link: https://lore.kernel.org/all/64931fac-085b-4ff3-9314-84bac2fa9bdb@quicinc.com/ # [1] Fixes: a409d9600959 ("dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM") Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://lore.kernel.org/r/20250307030350.69144-1-quic_bqiang@quicinc.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2025-03-12i2c: sis630: Fix an error handling path in sis630_probe()Christophe JAILLET
If i2c_add_adapter() fails, the request_region() call in sis630_setup() must be undone by a corresponding release_region() call, as done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/3d607601f2c38e896b10207963c6ab499ca5c307.1741033587.git.christophe.jaillet@wanadoo.fr Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2025-03-12i2c: ali15x3: Fix an error handling path in ali15x3_probe()Christophe JAILLET
If i2c_add_adapter() fails, the request_region() call in ali15x3_setup() must be undone by a corresponding release_region() call, as done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/9b2090cbcc02659f425188ea05f2e02745c4e67b.1741031878.git.christophe.jaillet@wanadoo.fr
2025-03-12i2c: ali1535: Fix an error handling path in ali1535_probe()Christophe JAILLET
If i2c_add_adapter() fails, the request_region() call in ali1535_setup() must be undone by a corresponding release_region() call, as done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/0daf63d7a2ce74c02e2664ba805bbfadab7d25e5.1741031571.git.christophe.jaillet@wanadoo.fr
2025-03-12i2c: omap: fix IRQ stormsAndreas Kemnade
On the GTA04A5 writing a reset command to the gyroscope causes IRQ storms because NACK IRQs are enabled and therefore triggered but not acked. Sending a reset command to the gyroscope by i2cset 1 0x69 0x14 0xb6 with an additional debug print in the ISR (not the thread) itself causes [ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00 [ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1 [ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110) [ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010) [ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102) [ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102) [ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102) repeating till infinity [...] (0x2 = NACK, 0x100 = Bus free, which is not enabled) Apparently no other IRQ bit gets set, so this stalls. Do not ignore enabled interrupts and make sure they are acked. If the NACK IRQ is not needed, it should simply not enabled, but according to the above log, caring about it is necessary unless the Bus free IRQ is enabled and handled. The assumption that is will always come with a ARDY IRQ, which was the idea behind ignoring it, proves wrong. It is true for simple reads from an unused address. To still avoid the i2cdetect trouble which is the reason for commit c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"), avoid doing much about NACK in omap_i2c_xfer_data() which is used by both IRQ mode and polling mode, so also the false detection fix is extended to polling usage and IRQ storms are avoided. By changing this, the hardirq handler is not needed anymore to filter stuff. The mentioned gyro reset now just causes a -ETIMEDOUT instead of hanging the system. Fixes: c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"). CC: stable@kernel.org Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250228140420.379498-1-andreas@kemnade.info
2025-03-12mmc: atmel-mci: Add missing clk_disable_unprepare()Gu Bowen
The error path when atmci_configure_dma() set dma fails in atmci driver does not correctly disable the clock. Add the missing clk_disable_unprepare() to the error path for pair with clk_prepare_enable(). Fixes: 467e081d23e6 ("mmc: atmel-mci: use probe deferring if dma controller is not ready yet") Signed-off-by: Gu Bowen <gubowen5@huawei.com> Acked-by: Aubin Constans <aubin.constans@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250225022856.3452240-1-gubowen5@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-03-12fs: dodge an atomic in putname if ref == 1Mateusz Guzik
While the structure is refcounted, the only consumer incrementing it is audit and even then the atomic operation is only needed when it interacts with io_uring. If putname spots a count of 1, there is no legitimate way for anyone to bump it. If audit is disabled, the count is guaranteed to be 1, which consistently elides the atomic for all path lookups. If audit is enabled, it still manages to elide the last decrement. Note the patch does not do anything to prevent audit from suffering atomics. See [1] and [2] for a different approach. Benchmarked on Sapphire Rapids issuing access() (ops/s): before: 5106246 after: 5269678 (+3%) Link 1: https://lore.kernel.org/linux-fsdevel/20250307161155.760949-1-mjguzik@gmail.com/ Link 2: https://lore.kernel.org/linux-fsdevel/20250307164216.GI2023217@ZenIV/ Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Link: https://lore.kernel.org/r/20250311181804.1165758-1-mjguzik@gmail.com Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-03-12wifi: mac80211: fix MPDU length parsing for EHT 5/6 GHzBenjamin Berg
The MPDU length is only configured using the EHT capabilities element on 2.4 GHz. On 5/6 GHz it is configured using the VHT or HE capabilities respectively. Fixes: cf0079279727 ("wifi: mac80211: parse A-MSDU len from EHT capabilities") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20250311121704.0634d31f0883.I28063e4d3ef7d296b7e8a1c303460346a30bf09c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-12ARM: shmobile: smp: Enforce shmobile_smp_* alignmentGeert Uytterhoeven
When the addresses of the shmobile_smp_mpidr, shmobile_smp_fn, and shmobile_smp_arg variables are not multiples of 4 bytes, secondary CPU bring-up fails: smp: Bringing up secondary CPUs ... CPU1: failed to come online CPU2: failed to come online CPU3: failed to come online smp: Brought up 1 node, 1 CPU Fix this by adding the missing alignment directive. Fixes: 4e960f52fce16a3b ("ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss") Closes: https://lore.kernel.org/r/CAMuHMdU=QR-JLgEHKWpsr6SbaZRc-Hz9r91JfpP8c3n2G-OjqA@mail.gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/c499234d559a0d95ad9472883e46077311051cd8.1741612208.git.geert+renesas@glider.be Cc: stable@vger.kernel.org
2025-03-12scripts: generate_rust_analyzer: add uapi crateTamir Duberstein
Commit 4e1746656839 ("rust: uapi: Add UAPI crate") did not update rust-analyzer to include the new crate. Add the missing definition to improve the developer experience. Fixes: 4e1746656839 ("rust: uapi: Add UAPI crate") Signed-off-by: Tamir Duberstein <tamird@gmail.com> Tested-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20250210-rust-analyzer-bindings-include-v2-2-23dff845edc3@gmail.com [ Slightly reworded title. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-03-12scripts: generate_rust_analyzer: add missing include_dirsTamir Duberstein
Commit 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`") specified OBJTREE for the bindings crate, and `source.include_dirs` for the kernel crate, likely in an attempt to support out-of-source builds for those crates where the generated files reside in `objtree` rather than `srctree`. This was insufficient because both bits of configuration are required for each crate; the result is that rust-analyzer is unable to resolve generated files for either crate in an out-of-source build. [ Originally we were not using `OBJTREE` in the `kernel` crate, but we did pass the variable anyway, so conceptually it could have been there since then. Regarding `include_dirs`, it started in `kernel` before being in mainline because we included the bindings directly there (i.e. there was no `bindings` crate). However, when that crate got created, we moved the `OBJTREE` there but not the `include_dirs`. Nowadays, though, we happen to need the `include_dirs` also in the `kernel` crate for `generated_arch_static_branch_asm.rs` which was not there back then -- Tamir confirms it is indeed required for that reason. - Miguel ] Add the missing bits to improve the developer experience. Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`") Signed-off-by: Tamir Duberstein <tamird@gmail.com> Tested-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20250210-rust-analyzer-bindings-include-v2-1-23dff845edc3@gmail.com [ Slightly reworded title. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-03-11Merge tag 'hyperv-fixes-signed-20250311' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Patches to fix Hyper-v framebuffer code (Michael Kelley and Saurabh Sengar) - Fix for Hyper-V output argument to hypercall that changes page visibility (Michael Kelley) - Fix for Hyper-V VTL mode (Naman Jain) * tag 'hyperv-fixes-signed-20250311' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio() x86/hyperv: Fix output argument to hypercall that changes page visibility fbdev: hyperv_fb: Allow graceful removal of framebuffer fbdev: hyperv_fb: Simplify hvfb_putmem fbdev: hyperv_fb: Fix hang in kdump kernel when on Hyper-V Gen 2 VMs drm/hyperv: Fix address space leak when Hyper-V DRM device is removed fbdev: hyperv_fb: iounmap() the correct memory when removing a device x86/hyperv/vtl: Stop kernel from probing VTL0 low memory
2025-03-11scripts: generate_rust_analyzer: add missing macros depsTamir Duberstein
The macros crate has depended on std and proc_macro since its introduction in commit 1fbde52bde73 ("rust: add `macros` crate"). These dependencies were omitted from commit 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`") resulting in missing go-to-definition and autocomplete, and false-positive warnings emitted from rust-analyzer such as: [{ "resource": "/Users/tamird/src/linux/rust/macros/module.rs", "owner": "_generated_diagnostic_collection_name_#1", "code": { "value": "non_snake_case", "target": { "$mid": 1, "path": "/rustc/", "scheme": "https", "authority": "doc.rust-lang.org", "query": "search=non_snake_case" } }, "severity": 4, "message": "Variable `None` should have snake_case name, e.g. `none`", "source": "rust-analyzer", "startLineNumber": 123, "startColumn": 17, "endLineNumber": 123, "endColumn": 21 }] Add the missing dependencies to improve the developer experience. [ Fiona had a different approach (thanks!) at: https://lore.kernel.org/rust-for-linux/20241205115438.234221-1-me@kloenk.dev/ But Tamir and Fiona agreed to this one. - Miguel ] Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`") Reviewed-by: Fiona Behrens <me@kloenk.dev> Diagnosed-by: Chayim Refael Friedman <chayimfr@gmail.com> Link: https://github.com/rust-lang/rust-analyzer/issues/17759#issuecomment-2646328275 Signed-off-by: Tamir Duberstein <tamird@gmail.com> Tested-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20250210-rust-analyzer-macros-core-dep-v3-1-45eb4836f218@gmail.com [ Removed `return`. Changed tag name. Added Link. Slightly reworded. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-03-11rust: Disallow BTF generation with Rust + LTOMatthew Maurer
The kernel cannot currently self-parse BTF containing Rust debug information. pahole uses the language of the CU to determine whether to filter out debug information when generating the BTF. When LTO is enabled, Rust code can cross CU boundaries, resulting in Rust debug information in CUs labeled as C. This results in a system which cannot parse its own BTF. Signed-off-by: Matthew Maurer <mmaurer@google.com> Cc: stable@vger.kernel.org Fixes: c1177979af9c ("btf, scripts: Exclude Rust CUs with pahole") Link: https://lore.kernel.org/r/20250108-rust-btf-lto-incompat-v1-1-60243ff6d820@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-03-11drm/i915: Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support ↵José Roberto de Souza
for partial mmaps Commit 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping") was the last patch of several patches fixing multiple partial mmaps. But without a bump in I915_PARAM_MMAP_GTT_VERSION there is no clean way for UMD to know if it can do multiple partial mmaps. Fixes: 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping") Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250306210827.171147-1-jose.souza@intel.com (cherry picked from commit bfef148f3680e6b9d28e7fca46d9520f80c5e50e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
generated by cgit (git 2.34.1) at 2025-09-18 23:03:18 +0000