summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-21usb: dwc2: gadget: Add EP disabled interrupt handlerVardan Mikayelyan
Reimplemented EP disabled interrupt handler and moved to corresponding function. This interrupt indicates that the endpoint has been disabled per the application's request. For IN endpoints flushes txfifo, in case of BULK clears DCTL_CGNPINNAK, in case of ISOC completes current request. For ISOC-OUT endpoints completes expired requests. If there is remaining request starts it. This is the part of ISOC-OUT transfer drop flow. When ISOC-OUT transfer expired we must disable ep to drop ongoing transfer. Tested-by: John Keeping <john@metanate.com> Reviewed-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Add Incomplete ISO IN/OUT Interrupt handlersVardan Mikayelyan
Incomplete ISO IN interrupt indicates one of the following conditions occurred while transmitting an ISOC transaction. - Corrupted IN Token for ISOC EP. - Packet not complete in FIFO. Incomplete ISO OUT indicates that there is at least one isochronous OUT endpoint on which the transfer is not completed in the current microframe. The following actions will be taken: In case of EP-IN - Determine the EP - Disable EP directly from this handler; when "Endpoint Disabled" interrupt is received flush FIFO In case of EP-OUT - Determine the EP - If target frame elapsed set DCTL_SGOUTNAK, unmask GOUTNAKEFF and proceed as described in section 7.5.1 of DWC-HSOTG Programming Guide Also added dwc2_gadget_target_frame_elapsed() helper function which will be used in Incomplete ISO IN/OUT Interrupt handlers. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Add OUTTKNEPDIS and NAKINTRPT handlersVardan Mikayelyan
NAKINTRPT interrupt is starting point for isoc-in transfer, synchronization done with first in token received from host, core asserts this interrupt when responds with 0 length data to in token, received from host. The first IN token is asynchronous for device - device does not know when first one token will arrive from host. On first token arrival HW generates 2 interrupts: 'in token received while FIFO empty' and 'NAK'. NAK interrupt for ISOC in means that token has arrived and ZLP was sent in response to that as there was no data in FIFO. SW is basing on this interrupt to obtain frame in which token has come and then based on the interval calculates next frame for transfer. OUTTKNEPDIS interrupt is starting point for isoc-out transfer, synchronization done with first out token received from host while corresponding ep is disabled. For OUTs the reason is same - device does not know initial frame in which out token will come. For this HW generates OUTTKNEPDIS - out token is received while EP is disabled. Upon getting this interrupt SW starts calculation for next transfer frame. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Add dwc2_gadget_start_next_request functionVardan Mikayelyan
Replaced repeating code with function call. Starts next request from ep queue. If queue is empty and ep is isoc -In case of OUT-EP unmasks OUTTKNEPDIS. OUTTKNEPDIS is masked in it's handler, so we need to unmask it here to be able to do resynchronization. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Add dwc2_gadget_read_ep_interrupts functionVardan Mikayelyan
Reads and returns interrupts for given endpoint, by masking epint_reg with corresponding mask. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Corrected interval calculationVardan Mikayelyan
Calculate the interval according to the USB 2.0 specification section 9.6.6. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Add dwc2_gadget_incr_frame_num()Vardan Mikayelyan
Increases and checks targeted frame number of current ep if overrun happened, sets flag and masks with DSTS_SOFFN_LIMIT Added following fields to struct dwc2_hsotg_ep -target_frame: Targeted frame num to setup next ISOC transfer -frame_overrun: Indicates SOF number overrun in DSTS Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Fix transfer stop programming for out endpointVardan Mikayelyan
According DWC-OTG databook, "GOUTNakEff" is read only and can be cleared only by "DCTL.CGOUTNak", but here we do not need to clear it because DWC-OTG programming guide says that before disabling any OUT endpoint, the application must enable Global OUT NAK mode, so if this mode is enabled we can continue without this step. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Corrected field namesVardan Mikayelyan
No-op change. Changed field names to prevent misunderstanding. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Remove unnecessary codeVardan Mikayelyan
This chunk is not needed here. There is no functionality depend on this, so if no-op, I think we do not need to have this interrupt unmasked. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: gadget: Remove unnecessary lineVardan Mikayelyan
Removed "ctrl |= DXEPCTL_USBACTEP" from dwc2_hsotg_start_req() function because this step is done in dwc2_hsotg_ep_enable(). Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc2: Add missing register field definitionsVardan Mikayelyan
Added register field definitions, register names are according DWC-OTG databook. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: pxa27x_udc: remove unused function argumentArnd Bergmann
We get a warning for this when building with W=1 because the argument gets assigned to something else but never read: drivers/usb/gadget/udc/pxa27x_udc.c: In function 'stop_activity': drivers/usb/gadget/udc/pxa27x_udc.c:1828:74: error: parameter 'driver' set but not used [-Werror=unused-but-set-parameter] This remove the argument entirely. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc3: gadget: Add the suspend state checking when stopping gadgetBaolin Wang
It will be crash to stop gadget when the dwc3 device had been into suspend state, thus we need to check if the dwc3 device had been into suspend state when UDC try to stop gadget. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc3: gadget: issue ENDTRANSFER conditional on resource_indexFelipe Balbi
Because of recent changes to transfer handling on DWC3, we will not get XferComplete unless we completely fill up our TRB ring. This means that we might get a Reset or Disconnect without getting a XferComplete first. In order to correctly release our allocated Transfer Resource, we must issue ENDTRANSFER command whenever dep->resource_index is valid. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc3: fix runtime PM in error pathRoger Quadros
If there is a failure after pm_runtime_enable/get_sync() we need to call pm_runtime_disable/put_sync(). Otherwise it will lead to an unbalanced pm_runtime_enable() on the subsequent probe if the earlier probe bailed out due to -EPROBE_DEFER. pm_runtime_get_sync() can fail as well so deal with that case too. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc3: gadget: simplify run_stop() break conditionFelipe Balbi
it's clear now that when is_on=true, we must loop until DWC3_DSTS_DEVCTRLHLT clears; while when is_on=false we must loop until DWC3_DSTS_DEVCTRLHLT gets set. Instead of adding actual if() statements, we can rely on XOR operation to evaluate to true only when the above conditions apply. Then, we can move the break condition back to the while() statement together with our timeout check and the resulting code is very compact and simpler to read. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc3: gadget: avoid while(1) in run_stop()Felipe Balbi
instead of looping forever and forcing a return if timeout reaches zero, we can just use timeout and loop's break condition directly. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc3: gadget: remove udelay() from run_stop()Felipe Balbi
testing shows that udelay() is unnecessary as controller reaches Halted state almost instantenously as can be seen by our timeout variable never actually decrementing. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc3: core: fixup dr_mode fallback selectionFelipe Balbi
We shouldn't change a host-only dwc3 to gadget-only if driver is built as gadget-only. Fix that up here. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc3: pci: add dr-mode for Intel dwc3Felipe Balbi
It's know that Intel's SoCs' dwc3 integration is peripheral-only since Intel implements its own portmux for role-swapping. In order to prevent dwc3 from ever registering and XHCI platform_device, let's just set dr-mode to peripheral-only on Intel SoCs. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: dwc3: gadget: rename 'ignore' argument to 'modify'Felipe Balbi
'modify' is what the current action is called. Let's rename it so it matches databook. While at that, also make sure to add support 'init' action too. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: gadget: add tracepoints to the gadget APIFelipe Balbi
This new set of tracepoints will help all gadget drivers and UDC drivers when problem appears. Note that, in order to be able to add tracepoints to udc-core.c we had to rename that to core.c and statically link it with trace.c to form udc-core.o. This is to make sure that module name stays the same. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21usb: gadget: move gadget API functions to udc-coreFelipe Balbi
instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-21Merge branch 'ib-extcon-powersupply-4.8' into extcon-nextChanwoo Choi
2016-06-21extcon: arizona: Update binding docs to mention new defines for GPSWCharles Keepax
Update the binding documentation to mention the defines added for the possible values of wlf,gpsw. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21extcon: usb-gpio: add support for ACPI gpio interfaceLu Baolu
GPIO resource could be retrieved through APCI as well. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Felipe Balbi <balbi@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21extcon: usb-gpio: add device binding for platform deviceLu Baolu
This is needed to handle the GPIO connected USB ID pin found on Intel Baytrail devices. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Felipe Balbi <balbi@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21extcon: usb-gpio: Don't miss event during suspend/resumeRoger Quadros
Pin state might have changed during suspend/resume while our interrupts were disabled and if device doesn't support wakeup. Scan for change during resume for such case. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21extcon: usb-gpio: switch to use pm wakeirq apisGrygorii Strashko
Switch to use PM wakeirq APIs which automates wakeup IRQs enabling/disabling and so allows to make code simpler. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21dt-bindings: ci-hdrc-usb2: s/gadget-itc-setting/itc-setting in exampleJisheng Zhang
What the code expect is "itc-setting" rather than "gadget-itc-setting", and this is also correctly described in the optional properties. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Rob Herring <robh@kernel.org>
2016-06-21usb: chipidea: Kconfig: improve Kconfig help textPeter Chen
Chipidea driver has been updated a lot, and more functions are supported, update Kconfig help text accordingly. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-06-20Merge tag 'v4.7-rockchip-clk-fixes1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes A bunch of fixes. Some for the newly added rk3399 clock tree, some concerning error handling and initialization and a revert of the mmc-phase clock initialization, as this could conflict with the bootloader setting of this clock and a real solution to initing the phase correctly from dw_mmc went in as fix for 4.7 through the mmc tree. * tag 'v4.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: release io resource when failing to init clk on rk3399 clk: rockchip: fix cpuclk registration error handling clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization" clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src clk: rockchip: mark rk3399 GIC clocks as critical clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
2016-06-20clk: Fix return value check in oxnas_stdclk_probe()Wei Yongjun
In case of error, the function syscon_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Fixes: 0bbd72b4c64f ("clk: Add Oxford Semiconductor OXNAS Standard Clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-20staging: lustre: quiet lockdep recursive lock warningAndreas Dilger
Lockdep complains about potential recursive locking during mount because the client configuration log is holding a lock on the MGC obd_device to prevent it from being torn down, while also getting mutexes on the MDC and OSC devices as they are instantiated: Lustre: Mounted myth-client ============================================= [ INFO: possible recursive locking detected ] 4.7.0-rc2-vm-nfs+ #127 Tainted: G C --------------------------------------------- May be due to missing lock nesting notation 2 locks held by ll_cfg_requeue/5928: #0: (&cli->cl_sem){.+.+.+}, at: mgc_requeue_thread+0x15d/0x730 [mgc] #1: (&cld->cld_lock){+.+.+.}, at: mgc_process_log+0x5e/0xf80 [mgc] CPU: 0 PID: 5928 Comm: ll_cfg_requeue Call Trace: [<ffffffff814a0855>] dump_stack+0x86/0xc1 [<ffffffff810e7766>] __lock_acquire+0x726/0x1210 [<ffffffff810e86be>] lock_acquire+0xfe/0x1f0 [<ffffffff81888171>] down_read+0x51/0xa0 [<ffffffffa04a8477>] sptlrpc_conf_client_adapt+0x47/0x150 [ptlrpc] [<ffffffffa0186b16>] mdc_set_info_async+0x2b6/0x470 [mdc] [<ffffffffa0294090>] class_notify_sptlrpc_conf+0x190/0x360 [obdclass] [<ffffffffa01a9e85>] mgc_process_log+0x925/0xf80 [mgc] [<ffffffffa01abafa>] mgc_requeue_thread+0x1fa/0x730 [mgc] [<ffffffff810af331>] kthread+0x101/0x120 [<ffffffff8188ad6f>] ret_from_fork+0x1f/0x40 Add a separate lock class for the MGC callpath, since it will always be held first, and none of the other obd_device locks should ever be held concurrently. Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/libcfs: Do not call kthread_run in wrong stateOleg Drokin
kthread_run might sleep during an allocation, and so it's considered unsafe to call with a state that's not RUNNABLE. Move the state setting to after kthread_run call. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/osc: glimpse lock should match only with granted locksAndriy Skulysh
A deadlock is possible during ccc_prep_size()->ldlm_lock_match() vs cl_io_lock() which is waiting for a matched lock and conflicts with already taken lock before ccc_prep_size(). It is better to send an additional lock request to avoid deadlock. Seagate-bug-id: MRP-3312 Signed-off-by: Andriy Skulysh <andriy.skulysh@seagate.com> Reviewed-on: http://review.whamcloud.com/18738 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7829 Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Bobi Jam <bobijam@hotmail.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre: Add documentation for unstable_stats in sysfsOleg Drokin
commit ac5b14810952 ("staging: lustre: osc: Track and limit "unstable" pages") added a new sysfs variable, but corresponding bit of documentation was not forgotten. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/osc: fix signed one bit fieldDmitry Eremin
Bit field 'oi_lockless' and 'oi_is_active' has one bit and is signed which is confusing. Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-on: http://review.whamcloud.com/19196 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7258 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Frank Zago <fzago@cray.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/llite: IOC_MDC_GETFILEINFO returns the wrong inoakam kumar bharathi
req_capsule_server_get() through __req_capsule_get in ll_dir_ioctl() returns a pointer to a PTLRPC request or reply buffer, which is assigned to struct mdt_body. If the command is IOC_MDS_GETFILEINFO then the inode "st.st_ino" should be assigned from one extracted from mdt_body through cl_fid_build_ino(). Signed-off-by: John Hammond <john.hammond@intel.com> Signed-off-by: akam kumar bharathi <azurelustre@gmail.com> Reviewed-on: http://review.whamcloud.com/17618 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5954 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/llite: ll_revalidate_dentry updateOleg Drokin
There are a couple of cases in ll_revalidate_dentry() where we are pretty sure the dentry is valid, so check for them early and save more expensive checks for later. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/llite: Restore proper opencache operationsOleg Drokin
Mark dentries that came to us via NFS in a special way so that we can tell them apart during open and activate open cache (we really don't want to do open/close RPC for every NFS IO). This became needed since dentry revlidate no longer reimplements any RPCs for lookup, and as such if a dentry is valid, ll_revalidate_dentry returns 1 and ll_lookup_it() is never visited during opens, we get straght into ll_file_open() without a valid intent/RPC. This used to be only true for NFS, so opencache was engaged needlessly, and it carries a cost of it's own if there is in fact no repetitive file opening-closing going on Signed-off-by: Oleg Drokin <oleg.drokin@intel.com> Reviewed-on: http://review.whamcloud.com/20354 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8019 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Li Xi <lixi@ddn.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/llite: don't panic when fid is insaneSergey Cheremencev
LASSERT should never be done on data that is received to over the network. Return EINVAL when server returns invalid fid despite of it_status == 0. Signed-off-by: Sergey Cheremencev <sergey.cheremencev@seagate.com> Seagate-bug-id: MRP-3073 Reviewed-on: http://review.whamcloud.com/17985 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7422 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/mdc: Zero atime in close RPCNiu Yawei
While atime on close is supposed to only increase, there's a bug in some older server versions where atime from a client is taken no matter the value that allows a stale client atime to overwrite a correct value. Update atime in close rpc to 0 to help such servers out. Signed-off-by: Niu Yawei <yawei.niu@intel.com> Reviewed-on: http://review.whamcloud.com/19932 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8041 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/llite: ensure obd is effective in onu_upcallYang Sheng
The watched obd device may still not setup while onu_upcall invoked. So we need verify it in cl_ocd_update. Signed-off-by: Yang Sheng <yang.sheng@intel.com> Reviewed-on: http://review.whamcloud.com/19597 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8027 Reviewed-by: Niu Yawei <yawei.niu@intel.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/ldlm: const qualify struct lustre_handle * paramsJohn L. Hammond
Add a const qualifier to several struct lustre_handle * parameters in the LDLM interface. Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-on: http://review.whamcloud.com/17071 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7403 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/llite: change it_data to it_requestJohn L. Hammond
Change the void *it_data member of struct lookup_intent to struct ptlrpc_request *it_request. Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-on: http://review.whamcloud.com/17070 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7403 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre: Inline Lustre intent disposition functionsOleg Drokin
They are just one-liners, so no point in having them exported and called through a different module. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre/llite: flatten struct lookup_intentJohn L. Hammond
Replace the union in struct lookup_intent with the members of struct lustre_indent_data. Remove the then unused struct lustre_intent_data. Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-on: http://review.whamcloud.com/17069 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7403 Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by: Frank Zago <fzago@cray.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20staging/lustre: Add newline to LU_OBJECT_DEBUG() messageBob Glossman
LU_OBJECT_DEBUG expects non \n terminated message from the caller, so it should add it's own to keep debug logger happy. Signed-off-by: Bob Glossman <bob.glossman@intel.com> Reviewed-on: http://review.whamcloud.com/19960 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8094 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-20 20:53:18 +0000