| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupts when replugging the device in gpio-dln2
- remove the arbitrary timeout on virtio requests from gpio-virtio
* tag 'gpio-fixes-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtio: remove timeout
gpio: dln2: Fix interrupts when replugging the device
|
|
After commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP"),
if GRO is enabled on a veth device and TSO is disabled on the peer
device, TCP skbs will go through the NAPI callback. If there is no XDP
program attached, the veth code does not perform any share check, and
shared/cloned skbs could enter the GRO engine.
Ignat reported a BUG triggered later-on due to the above condition:
[ 53.970529][ C1] kernel BUG at net/core/skbuff.c:3574!
[ 53.981755][ C1] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[ 53.982634][ C1] CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc5+ #25
[ 53.982634][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 53.982634][ C1] RIP: 0010:skb_shift+0x13ef/0x23b0
[ 53.982634][ C1] Code: ea 03 0f b6 04 02 48 89 fa 83 e2 07 38 d0
7f 08 84 c0 0f 85 41 0c 00 00 41 80 7f 02 00 4d 8d b5 d0 00 00 00 0f
85 74 f5 ff ff <0f> 0b 4d 8d 77 20 be 04 00 00 00 4c 89 44 24 78 4c 89
f7 4c 89 8c
[ 53.982634][ C1] RSP: 0018:ffff8881008f7008 EFLAGS: 00010246
[ 53.982634][ C1] RAX: 0000000000000000 RBX: ffff8881180b4c80 RCX: 0000000000000000
[ 53.982634][ C1] RDX: 0000000000000002 RSI: ffff8881180b4d3c RDI: ffff88810bc9cac2
[ 53.982634][ C1] RBP: ffff8881008f70b8 R08: ffff8881180b4cf4 R09: ffff8881180b4cf0
[ 53.982634][ C1] R10: ffffed1022999e5c R11: 0000000000000002 R12: 0000000000000590
[ 53.982634][ C1] R13: ffff88810f940c80 R14: ffff88810f940d50 R15: ffff88810bc9cac0
[ 53.982634][ C1] FS: 0000000000000000(0000) GS:ffff888235880000(0000) knlGS:0000000000000000
[ 53.982634][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 53.982634][ C1] CR2: 00007ff5f9b86680 CR3: 0000000108ce8004 CR4: 0000000000170ee0
[ 53.982634][ C1] Call Trace:
[ 53.982634][ C1] <TASK>
[ 53.982634][ C1] tcp_sacktag_walk+0xaba/0x18e0
[ 53.982634][ C1] tcp_sacktag_write_queue+0xe7b/0x3460
[ 53.982634][ C1] tcp_ack+0x2666/0x54b0
[ 53.982634][ C1] tcp_rcv_established+0x4d9/0x20f0
[ 53.982634][ C1] tcp_v4_do_rcv+0x551/0x810
[ 53.982634][ C1] tcp_v4_rcv+0x22ed/0x2ed0
[ 53.982634][ C1] ip_protocol_deliver_rcu+0x96/0xaf0
[ 53.982634][ C1] ip_local_deliver_finish+0x1e0/0x2f0
[ 53.982634][ C1] ip_sublist_rcv_finish+0x211/0x440
[ 53.982634][ C1] ip_list_rcv_finish.constprop.0+0x424/0x660
[ 53.982634][ C1] ip_list_rcv+0x2c8/0x410
[ 53.982634][ C1] __netif_receive_skb_list_core+0x65c/0x910
[ 53.982634][ C1] netif_receive_skb_list_internal+0x5f9/0xcb0
[ 53.982634][ C1] napi_complete_done+0x188/0x6e0
[ 53.982634][ C1] gro_cell_poll+0x10c/0x1d0
[ 53.982634][ C1] __napi_poll+0xa1/0x530
[ 53.982634][ C1] net_rx_action+0x567/0x1270
[ 53.982634][ C1] __do_softirq+0x28a/0x9ba
[ 53.982634][ C1] run_ksoftirqd+0x32/0x60
[ 53.982634][ C1] smpboot_thread_fn+0x559/0x8c0
[ 53.982634][ C1] kthread+0x3b9/0x490
[ 53.982634][ C1] ret_from_fork+0x22/0x30
[ 53.982634][ C1] </TASK>
Address the issue by skipping the GRO stage for shared or cloned skbs.
To reduce the chance of OoO, try to unclone the skbs before giving up.
v1 -> v2:
- use avoid skb_copy and fallback to netif_receive_skb - Eric
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Fixes: d3256efd8e8b ("veth: allow enabling NAPI even without XDP")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/b5f61c5602aab01bac8d711d8d1bfab0a4817db7.1640197544.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Disable card detect during shutdown
MMC host:
- mmci: Fixup tuning support for stm32_sdmmc
- meson-mx-sdhc: Fix support for multi-block SDIO commands
- sdhci-tegra: Fix support for eMMC HS400ES mode"
* tag 'mmc-v5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mmci: stm32: clear DLYB_CR after sending tuning command
mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commands
mmc: core: Disable card detect during shutdown
mmc: sdhci-tegra: Fix switch to HS400ES mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is my last set of fixes for 5.16, including
- multiple code fixes for the op-tee firmware driver
- Two patches for allwinner SoCs, one fixing the phy mode on a board,
the other one fixing a driver bug in the "RSB" bus driver. This was
originally targeted for 5.17, but seemed worth moving to 5.16
- Two small fixes for devicetree files on i.MX platforms, resolving
problems with ethernet and i2c"
* tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
arm64: dts: lx2160a: fix scl-gpios property name
tee: handle lookup of shm with reference count 0
ARM: dts: imx6qdl-wandboard: Fix Ethernet support
bus: sunxi-rsb: Fix shutdown
arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.17
Third set of patches for v5.17, and the final one if all goes well. We
have Specific Absorption Rate (SAR) support for both mt76 and rtw88.
Also iwlwifi should be now W=1 warning free. But otherwise nothing
really special this time, business as usual.
Major changes:
mt76
* Specific Absorption Rate (SAR) support
* mt7921: new PCI ids
* mt7921: 160 MHz channel support
iwlwifi
* fix W=1 and sparse warnings
* BNJ hardware support
* add new killer device ids
* support for Time-Aware-SAR (TAS) from the BIOS
* Optimized Connectivity Experience (OCE) scan support
rtw88
* hardware scan
* Specific Absorption Rate (SAR) support
ath11k
* qca6390/wcn6855: report signal and tx bitrate
* qca6390: rfkill support
* qca6390/wcn6855: regdb.bin support
ath5k
* switch to rate table based lookup
wilc1000
* spi: reset/enable GPIO support
* tag 'wireless-drivers-next-2021-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (148 commits)
mt76: mt7921: fix a possible race enabling/disabling runtime-pm
wilc1000: Document enable-gpios and reset-gpios properties
wilc1000: Add reset/enable GPIO support to SPI driver
wilc1000: Convert static "chipid" variable to device-local variable
rtw89: 8852a: correct bit definition of dfs_en
rtw88: don't consider deep PS mode when transmitting packet
ath11k: Fix unexpected return buffer manager error for QCA6390
ath11k: add support of firmware logging for WCN6855
ath11k: Fix napi related hang
ath10k: replace strlcpy with strscpy
rtw88: support SAR via kernel common API
rtw88: 8822c: add ieee80211_ops::hw_scan
iwlwifi: mei: wait before mapping the shared area
iwlwifi: mei: clear the ownership when the driver goes down
iwlwifi: yoyo: fix issue with new DBGI_SRAM region read.
iwlwifi: fw: fix some scan kernel-doc
iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ
iwlwifi: mvm: remove card state notification code
iwlwifi: mvm: drop too short packets silently
iwlwifi: mvm: fix AUX ROC removal
...
====================
Link: https://lore.kernel.org/r/20211223141108.78808C36AE9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While introduction of this menu brings a nice view in the configuration tools,
it brought more issues than solves, i.e. it prevents to locate files in the
intel/ subfolder without touching non-related Kconfig dependencies elsewhere.
Drop X86_PLATFORM_DRIVERS_INTEL altogether.
Note, on x86 it's enabled by default and it's quite unlikely anybody wants to
disable all of the modules in this submenu.
Fixes: 8bd836feb6ca ("platform/x86: intel_skl_int3472: Move to intel/ subfolder")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211222194941.76054-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Certain functionality or its implementation in System76 EC firmware may
be different to the proprietary ODM EC firmware. Introduce a new bool,
`has_open_ec`, to guard our specific logic. Detect the use of this by
looking for a custom ACPI method name used in System76 firmware.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20211222185154.4560-1-tcrawford@system76.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The traces when registering a powerzone is at the pr_info level and
should be changed to pr_debug as requested by Greg-KH.
Cc: Greg KH <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/YGAnRx8SiZHFPpY6@kroah.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20211123101601.2433340-2-daniel.lezcano@linaro.org
|
|
The dtpm.h header file is exporting a function which is not
implemented neither needed. Remove it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20211123101601.2433340-1-daniel.lezcano@linaro.org
|
|
Convert free_work into delayed_work, similar to ttm to allow converting the
blocking lock in __i915_gem_free_objects to a trylock.
Unlike ttm, the object should already be idle, as it's kept alive
by a reference through struct i915_vma->active, which is dropped
after all vma's are idle.
Because of this, we can use a no wait by default, or when the lock
is contested, we use ttm's 10 ms.
The trylock should only fail when the object is sharing it's resv with
other objects, and typically objects are not kept locked for a long
time, so we can safely retry on failure.
Fixes: be7612fd6665 ("drm/i915: Require object lock when freeing pages during destruction")
Testcase: igt/gem_exec_alignment/pi*
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222155622.2960379-1-maarten.lankhorst@linux.intel.com
|
|
Amit Cohen says:
====================
mlxsw: Add tests for VxLAN with IPv6 underlay
mlxsw driver lately added support for VxLAN with IPv6 underlay.
This set adds tests for IPv6, which are dedicated for mlxsw.
Patch set overview:
Patches #1-#2 make vxlan.sh test more flexible and extend it for IPv6
Patches #3-#4 make vxlan_fdb_veto.sh test more flexible and extend it
for IPv6
Patches #5-#6 add tests for VxLAN flooding for different ASICs
Patches #7-#8 add test for VxLAN related traps and align the existing
test
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the case that sends packets with "too short inner packet" to
include part of ethernet header, to make the trap to be triggered due to
the correct reason.
According to ASIC arch, the trap is triggered if overlay packet length is
less than 18B, and the minimum inner packet should include source MAC and
destination MAC.
Till now the case passed because one of the reserved bits in VxLAN
header was used. This issue was found while adding an equivalent test
for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test configures VxLAN with IPv6 underlay and verifies that the
expected traps are triggered under the right conditions.
The test is similar to the existing IPv4 test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-2 and above, which support up to four
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device stores flood records in a singly linked list where each
record stores up to X IP addresses of remote VTEPs.
The number of records is changed according to ASIC type and address
family.
Add a test which is similar to the existing IPv4 test to check IPv6.
The test is dedicated for Spectrum-1 switches, which support up to five
IPv6 addresses in one record.
The test verifies that packets are correctly flooded in various cases such
as deletion of a record in the middle of the list.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test to verify FDB vetos of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vxlan_fdb_veto.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test to verify configuration of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Add separated test cases for learning which is not supported for IPv6
and for UDP checksum flags which are different from IPv4 flags.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vxlan.sh cases are dedicated to test VxLAN with IPv4 underlay.
The main changes to test IPv6 underlay are IP addresses and some flags.
Add variables to define all the values which supposed to be different
for IPv6 testing, set them to use the existing values by default.
The next patch will define the new added variables in a separated file,
so the same tests can be used for IPv6 also.
Rename some functions to include "ipv4", so the next patch will add
equivalent functions for IPv6.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds basic support for EtherType RX frame steering for
LLDP and PTP using the hardware offload capabilities.
Example steps for setting up RX frame steering for LLDP and PTP:
$ IFDEVNAME=eth0
$ tc qdisc add dev $IFDEVNAME ingress
$ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
For LLDP
$ tc filter add dev $IFDEVNAME parent ffff: protocol 0x88cc \
flower hw_tc 5
OR
$ tc filter add dev $IFDEVNAME parent ffff: protocol LLDP \
flower hw_tc 5
For PTP
$ tc filter add dev $IFDEVNAME parent ffff: protocol 0x88f7 \
flower hw_tc 6
Show tc ingress filter
$ tc filter show dev $IFDEVNAME ingress
v1->v2:
Thanks to Kurt's and Sebastian's suggestion.
- change from __be16 to u16 etype
- change ETHER_TYPE_FULL_MASK to use cpu_to_be16() macro
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch series extends the current supported bridge flags with the
following flags: BR_FLOOD, BR_BCAST_FLOOD and BR_LEARNING.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix suspicious rcu_dereference_protected() usage when offloading tc action.
We should hold tcfa_lock to offload tc action in action initiation.
Without these changes, the following warning will be observed:
WARNING: suspicious RCU usage
5.16.0-rc5-net-next-01504-g7d1f236dcffa-dirty #50 Tainted: G I
-----------------------------
include/net/tc_act/tc_tunnel_key.h:33 suspicious rcu_dereference_protected() usage!
1 lock held by tc/12108:
CPU: 4 PID: 12108 Comm: tc Tainted: G
Hardware name: Dell Inc. PowerEdge R740/07WCGN, BIOS 1.6.11 11/20/2018
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
lockdep_rcu_suspicious+0xed/0xf8
tcf_tunnel_key_offload_act_setup+0x1de/0x300 [act_tunnel_key]
tcf_action_offload_add_ex+0xc0/0x1f0
tcf_action_init+0x26a/0x2f0
tcf_action_add+0xa9/0x1f0
tc_ctl_action+0xfb/0x170
rtnetlink_rcv_msg+0x169/0x510
? sched_clock+0x9/0x10
? rtnl_newlink+0x70/0x70
netlink_rcv_skb+0x55/0x100
rtnetlink_rcv+0x15/0x20
netlink_unicast+0x1a8/0x270
netlink_sendmsg+0x245/0x490
sock_sendmsg+0x65/0x70
____sys_sendmsg+0x219/0x260
? __import_iovec+0x2c/0x150
___sys_sendmsg+0xb7/0x100
? __lock_acquire+0x3d5/0x1f40
? __this_cpu_preempt_check+0x13/0x20
? lock_is_held_type+0xe4/0x140
? sched_clock+0x9/0x10
? ktime_get_coarse_real_ts64+0xbe/0xd0
? __this_cpu_preempt_check+0x13/0x20
? lockdep_hardirqs_on+0x7e/0x100
? ktime_get_coarse_real_ts64+0xbe/0xd0
? trace_hardirqs_on+0x2a/0xf0
__sys_sendmsg+0x5a/0xa0
? syscall_trace_enter.constprop.0+0x1dd/0x220
__x64_sys_sendmsg+0x1f/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4db7bb7a60
Fixes: 8cbfe939abe9 ("flow_offload: allow user to offload tc action to net device")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Struct sctp_ep_common is included in both asoc and ep, but hlist_node
and hashent are only needed by ep after asoc_hashtable was dropped by
Commit b5eff7128366 ("sctp: drop the old assoc hashtable of sctp").
So it is better to move hlist_node and hashent from sctp_ep_common to
sctp_endpoint, and it saves some space for each asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When cross compiling i386_defconfig on an arm64 host with clang, there
are a few instances of '-Waddress-of-packed-member' and
'-Wgnu-variable-sized-type-not-at-end' in arch/x86/boot/compressed/,
which should both be disabled with the cc-disable-warning calls in that
directory's Makefile, which indicates that cc-disable-warning is failing
at the point of testing these flags.
The cc-disable-warning calls fail because at the point that the flags
are tested, KBUILD_CFLAGS has '-march=i386' without $(CLANG_FLAGS),
which has the '--target=' flag to tell clang what architecture it is
targeting. Without the '--target=' flag, the host architecture (arm64)
is used and i386 is not a valid value for '-march=' in that case. This
error can be seen by adding some logging to try-run:
clang-14: error: the clang compiler does not support '-march=i386'
Invoking the compiler has to succeed prior to calling cc-option or
cc-disable-warning in order to accurately test whether or not the flag
is supported; if it doesn't, the requested flag can never be added to
the compiler flags. Move $(CLANG_FLAGS) to the beginning of KBUILD_FLAGS
so that any new flags that might be added in the future can be
accurately tested.
Fixes: d5cbd80e302d ("x86/boot: Add $(CLANG_FLAGS) to compressed KBUILD_CFLAGS")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211222163040.1961481-1-nathan@kernel.org
|
|
Kernel generates mapping change message, XFRM_MSG_MAPPING,
when a source port chage is detected on a input state with UDP
encapsulation set. Kernel generates a message for each IPsec packet
with new source port. For a high speed flow per packet mapping change
message can be excessive, and can overload the user space listener.
Introduce rate limiting for XFRM_MSG_MAPPING message to the user space.
The rate limiting is configurable via netlink, when adding a new SA or
updating it. Use the new attribute XFRMA_MTIMER_THRESH in seconds.
v1->v2 change:
update xfrm_sa_len()
v2->v3 changes:
use u32 insted unsigned long to reduce size of struct xfrm_state
fix xfrm_ompat size Reported-by: kernel test robot <lkp@intel.com>
accept XFRM_MSG_MAPPING only when XFRMA_ENCAP is present
Co-developed-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch adds SM4 encryption algorithm entry to ealg_list.
Signed-off-by: Xu Jia <xujia39@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch allows IPsec to use SM3 HMAC authentication algorithm.
Signed-off-by: Xu Jia <xujia39@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
SA use_time was only updated once, for the first packet.
with this fix update the use_time for every packet.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
All the error handling paths of 'mlx5e_tc_add_fdb_flow()' end to 'err_out'
where 'flow_flag_set(flow, FAILED);' is called.
All but the new error handling paths added by the commits given in the
Fixes tag below.
Fix these error handling paths and branch to 'err_out'.
Fixes: 166f431ec6be ("net/mlx5e: Add indirect tc offload of ovs internal port")
Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
(cherry picked from commit 31108d142f3632970f6f3e0224bd1c6781c9f87d)
|
|
When there is ct or sample action, the ct or sample rule will be deleted
and return. But if there is an extra mirror action, the forward rule can't
be deleted because of the return.
Fix it by removing the return.
Fixes: 69e2916ebce4 ("net/mlx5: CT: Add support for mirroring")
Fixes: f94d6389f6a8 ("net/mlx5e: TC, Add support to offload sample action")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There are two ICOSQs per channel: one is needed for RX, and the other
for async operations (XSK TX, kTLS offload). Currently, the recovery
flow for both is the same, and async ICOSQ is mistakenly treated like
the regular ICOSQ.
This patch prevents running the regular ICOSQ recovery on async ICOSQ.
The purpose of async ICOSQ is to handle XSK wakeup requests and post
kTLS offload RX parameters, it has nothing to do with RQ and XSKRQ UMRs,
so the regular recovery sequence is not applicable here.
Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Both regular RQ and XSKRQ use the same ICOSQ for UMRs. When doing
recovery for the ICOSQ, don't forget to deactivate XSKRQ.
XSK can be opened and closed while channels are active, so a new mutex
prevents the ICOSQ recovery from running at the same time. The ICOSQ
recovery deactivates and reactivates XSKRQ, so any parallel change in
XSK state would break consistency. As the regular RQ is running, it's
not enough to just flush the recovery work, because it can be
rescheduled.
Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When TC classifier action offloads are disabled (CONFIG_MLX5_CLS_ACT in
Kconfig), the mlx5e_rep_tc_receive() function which is responsible for
passing the skb to the stack (or freeing it) is defined as a nop, and
results in leaking the skb memory. Replace the nop with a call to
napi_gro_receive() to resolve the leak.
Fixes: 28e7606fa8f1 ("net/mlx5e: Refactor rx handler of represetor device")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct
mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually
of type struct mlx5e_tx_timeout_ctx *.
mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected
mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000
BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae)
kernel stack overflow (page fault): 0000 [#1] SMP NOPTI
CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
[mlx5_core]
Call Trace:
mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core]
devlink_health_do_dump.part.91+0x71/0xd0
devlink_health_report+0x157/0x1b0
mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core]
? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0
[mlx5_core]
? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core]
? update_load_avg+0x19b/0x550
? set_next_entity+0x72/0x80
? pick_next_task_fair+0x227/0x340
? finish_task_switch+0xa2/0x280
mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core]
process_one_work+0x1de/0x3a0
worker_thread+0x2d/0x3c0
? process_one_work+0x3a0/0x3a0
kthread+0x115/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x30
--[ end trace 51ccabea504edaff ]---
RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
end Kernel panic - not syncing: Fatal exception
To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which
extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the
TX-timeout-recovery flow dump callback.
Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Only prio 1 is supported if firmware doesn't support ignore flow
level for nic mode. The offending commit removed the check wrongly.
Add it back.
Fixes: 9a99c8f1253a ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
SF do not directly control the PCI device. During recovery flow SF
should not be allowed to do pci disable or pci reset, its PF will do it.
It fixes the following kernel trace:
mlx5_core.sf mlx5_core.sf.25: mlx5_health_try_recover:387:(pid 40948): starting health recovery flow
mlx5_core 0000:03:00.0: mlx5_pci_slot_reset was called
mlx5_core 0000:03:00.0: wait vital counter value 0xab175 after 1 iterations
mlx5_core.sf mlx5_core.sf.25: firmware version: 24.32.532
mlx5_core.sf mlx5_core.sf.23: mlx5_health_try_recover:387:(pid 40946): starting health recovery flow
mlx5_core 0000:03:00.0: mlx5_pci_slot_reset was called
mlx5_core 0000:03:00.0: wait vital counter value 0xab193 after 1 iterations
mlx5_core.sf mlx5_core.sf.23: firmware version: 24.32.532
mlx5_core.sf mlx5_core.sf.25: mlx5_cmd_check:813:(pid 40948): ENABLE_HCA(0x104) op_mod(0x0) failed,
status bad resource state(0x9), syndrome (0x658908)
mlx5_core.sf mlx5_core.sf.25: mlx5_function_setup:1292:(pid 40948): enable hca failed
mlx5_core.sf mlx5_core.sf.25: mlx5_health_try_recover:389:(pid 40948): health recovery failed
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case IRQ layer failed to find or to request irq, the driver is
printing the first cpu of the provided affinity as part of the error
print. Empty affinity is a valid input for the IRQ layer, and it is
an error to call cpumask_first() on empty affinity.
Remove the first cpu print from the error message.
Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Hard coded CPU (0 in our case) might be offline. Hence, use the first
online CPU instead.
Fixes: f891b7cdbdcd ("net/mlx5: Enable single IRQ for PCI Function")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
On BlueField the E-Switch manager is the ECPF (vport 0xFFFE), but when
querying capabilities of ECPF eswitch manager, need to query vport 0
with other_vport = 0.
Fixes: 9091b821aaa4 ("net/mlx5: DR, Handle eswitch manager and uplink vports separately")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The mlx5_get_uars_page() function returns error pointers.
Using IS_ERR() to check the return value to fix this.
Fixes: 4ec9e7b02697 ("net/mlx5: DR, Expose steering domain functionality")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The PVSCSI implementation in the VMware hypervisor under specific
configuration ("SCSI Bus Sharing" set to "Physical") returns zero dataLen
in the completion descriptor for READ CAPACITY(16). As a result, the kernel
can not detect proper disk geometry. This can be recognized by the kernel
message:
[ 0.776588] sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
The PVSCSI implementation in QEMU does not set dataLen at all, keeping it
zeroed. This leads to a boot hang as was reported by Shmulik Ladkani.
It is likely that the controller returns the garbage at the end of the
buffer. Residual length should be set by the driver in that case. The SCSI
layer will erase corresponding data. See commit bdb2b8cab439 ("[SCSI] erase
invalid data returned by device") for details.
Commit e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length")
introduced the issue by setting residual length unconditionally, causing
the SCSI layer to erase the useful payload beyond dataLen when this value
is returned as 0.
As a result, considering existing issues in implementations of PVSCSI
controllers, we do not want to call scsi_set_resid() when dataLen ==
0. Calling scsi_set_resid() has no effect if dataLen equals buffer length.
Link: https://lore.kernel.org/lkml/20210824120028.30d9c071@blondie/
Link: https://lore.kernel.org/r/20211220190514.55935-1-amakhalov@vmware.com
Fixes: e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length")
Cc: Matt Wang <wwentao@vmware.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Vishal Bhakta <vbhakta@vmware.com>
Cc: VMware PV-Drivers <pv-drivers@vmware.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-and-suggested-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
|- iscsi_if_destroy_conn |-dev_attr_show
|-iscsi_conn_teardown
|-spin_lock_bh |-iscsi_sw_tcp_conn_get_param
|-kfree(conn->persistent_address) |-iscsi_conn_get_param
|-kfree(conn->local_ipaddr)
==>|-read persistent_address
==>|-read local_ipaddr
|-spin_unlock_bh
When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a
UAF may be triggered.
Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com
Reported-by: Lu Tixiong <lutianxiong@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Lixiaokeng <lixiaokeng@huawei.com>
Signed-off-by: Linfeilong <linfeilong@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
io_uring supports using offset == -1 for using the current file position,
and we read that in as part of read/write command setup. For the non-iter
read/write types we pass in NULL for the position pointer, but for the
iter types we should not be passing any anything but 0 for the position
for a stream.
Clear kiocb->ki_pos if the file is a stream, don't leave it as -1. If we
do, then the request will error with -ESPIPE.
Fixes: ba04291eb66e ("io_uring: allow use of offset == -1 to mean file position")
Link: https://github.com/axboe/liburing/discussions/501
Reported-by: Samuel Williams <samuel.williams@oriontransfer.co.nz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's not only supported by HG/PX laptops. It's supported
by all dGPUs which supports BOCO/BACO functionality (runtime
D3).
BOCO - Bus Off, Chip Off. The entire chip is powered off.
This is controlled by ACPI.
BACO - Bus Active, Chip Off. The chip still shows up
on the PCI bus, but the device itself is powered
down.
v2: fix missed HG/PX reference
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Four cleanups
- Replacing lagacy gpio interface of dsi driver with gpiod one.
- Implementing a generic GEM object mmap and use it instead of
exynos specific one.
- Dropping the use of label from dsi driver. Which also fixes
a build warning.
- Just trivial cleanup by dropping unnecessay code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222035345.26595-1-inki.dae@samsung.com
|
|
https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Changes for v5.17-rc1
This contains a fairly large rework that makes the buffer objects behave
more according to what the DMA-BUF infrastructure expects. A buffer
object cache is implemented on top of that to make certain operations
such as page-flipping more efficient by avoiding needless map/unmap
operations. This in turn is useful to implement asynchronous commits to
support legacy cursor updates.
Another fairly big addition is the NVDEC driver. This uses the updated
UABI introduced in v5.15-rc1 to provide access to the video decode
engines found on Tegra210 and later.
This also includes some power management improvements that are useful on
older devices in particular because they, together with a bunch of other
changes across the kernel, allow the system to scale down frequency and
voltages when mostly idle and prevent these devices from becoming
excessively hot.
The remainder of these changes is an assortment of cleanups and minor
fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217142912.558095-1-thierry.reding@gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amdgpu:
- Add some display debugfs entries
- RAS fixes
- SR-IOV fixes
- W=1 fixes
- Documentation fixes
- IH timestamp fix
- Misc power fixes
- IP discovery fixes
- Large driver documentation updates
- Multi-GPU memory use reductions
- Misc display fixes and cleanups
- Add new SMU debug option
amdkfd:
- SVM fixes
radeon:
- Fix typo in comment
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216202731.5900-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.16-rc7:
- Fix fallout from guc submission locking rework
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87wnjwydhs.fsf@intel.com
|
|
Amit Cohen says:
====================
Add tests for VxLAN with IPv6 underlay
mlxsw driver lately added support for VxLAN with IPv6 underlay.
This set adds the relevant tests for IPv6, most of them are same to
IPv4 tests with the required changes.
Patch set overview:
Patch #1 relaxes requirements for offloading TC filters that
match on 802.1q fields. The following selftests make use of these
newly-relaxed filters.
Patch #2 adds preparation as part of selftests API, which will be used
later.
Patches #3-#4 add tests for VxLAN with bridge aware and unaware.
Patche #5 cleans unused function.
Patches #6-#7 add tests for VxLAN symmetric and asymmetric.
Patch #8 adds test for Q-in-VNI.
====================
Link: https://lore.kernel.org/r/20211221144949.2527545-1-amcohen@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
