summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-27drbd: use bio_{start,end}_io_acctChristoph Hellwig
Switch drbd to use the nicer bio accounting helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: add disk/bio-based accounting helpersChristoph Hellwig
Add two new helpers to simplify I/O accounting for bio based drivers. Currently these drivers use the generic_start_io_acct and generic_end_io_acct helpers which have very cumbersome calling conventions, don't actually return the time they started accounting, and try to deal with accounting for partitions, which can't happen for bio based drivers. The new helpers will be used to subsequently replace uses of the old helpers. The main API is the bio based wrappes in blkdev.h, but for zram which wants to account rw_page based I/O lower level routines are provided as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27bcache: configure the asynchronous registertion to be experimentalColy Li
In order to avoid the experimental async registration interface to be treated as new kernel ABI for common users, this patch makes it as an experimental kernel configure BCACHE_ASYNC_REGISTRAION. This interface is for extreme large cached data situation, to make sure the bcache device can always created without the udev timeout issue. For normal users the async or sync registration does not make difference. In future when we decide to use the asynchronous registration as default behavior, this experimental interface may be removed. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27bcache: asynchronous devices registrationColy Li
When there is a lot of data cached on cache device, the bcach internal btree can take a very long to validate during the backing device and cache device registration. In my test, it may takes 55+ minutes to check all the internal btree nodes. The problem is that the registration is invoked by udev rules and the udevd has 180 seconds timeout by default. If the btree node checking time is longer than udevd timeout, the registering process will be killed by udevd with SIGKILL. If the registering process has pending sigal, creating kthread for bcache will fail and the device registration will fail. The result is, for bcache device which cached a lot of data on cache device, the bcache device node like /dev/bcache<N> won't create always due to the very long btree checking time. A solution to avoid the udevd 180 seconds timeout is to register devices in an asynchronous way. Which is, after writing cache or backing device path into /sys/fs/bcache/register_async, the kernel code will create a kworker and move all the btree node checking (for cache device) or dirty data counting (for cached device) in the kwork context. Then the kworder is scheduled on system_wq and the registration code just returned to user space udev rule task. By this asynchronous way, the udev task for bcache rule will complete in seconds, no matter how long time spent in the kworker context, it won't be killed by udevd for a timeout. After all the checking and counting are done asynchronously in the kworker, the bcache device will eventually be created successfully. This patch does the above chagne and add a register sysfs file /sys/fs/bcache/register_async. Writing the registering device path into this sysfs file will do the asynchronous registration. The register_async interface is for very rare condition and won't be used for common users. In future I plan to make the asynchronous registration as default behavior, which depends on feedback for this patch. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27bcache: fix refcount underflow in bcache_device_free()Coly Li
The problematic code piece in bcache_device_free() is, 785 static void bcache_device_free(struct bcache_device *d) 786 { 787 struct gendisk *disk = d->disk; [snipped] 799 if (disk) { 800 if (disk->flags & GENHD_FL_UP) 801 del_gendisk(disk); 802 803 if (disk->queue) 804 blk_cleanup_queue(disk->queue); 805 806 ida_simple_remove(&bcache_device_idx, 807 first_minor_to_idx(disk->first_minor)); 808 put_disk(disk); 809 } [snipped] 816 } At line 808, put_disk(disk) may encounter kobject refcount of 'disk' being underflow. Here is how to reproduce the issue, - Attche the backing device to a cache device and do random write to make the cache being dirty. - Stop the bcache device while the cache device has dirty data of the backing device. - Only register the backing device back, NOT register cache device. - The bcache device node /dev/bcache0 won't show up, because backing device waits for the cache device shows up for the missing dirty data. - Now echo 1 into /sys/fs/bcache/pendings_cleanup, to stop the pending backing device. - After the pending backing device stopped, use 'dmesg' to check kernel message, a use-after-free warning from KASA reported the refcount of kobject linked to the 'disk' is underflow. The dropping refcount at line 808 in the above code piece is added by add_disk(d->disk) in bch_cached_dev_run(). But in the above condition the cache device is not registered, bch_cached_dev_run() has no chance to be called and the refcount is not added. The put_disk() for a non- added refcount of gendisk kobject triggers a underflow warning. This patch checks whether GENHD_FL_UP is set in disk->flags, if it is not set then the bcache device was not added, don't call put_disk() and the the underflow issue can be avoided. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27bcache: Convert pr_<level> uses to a more typical styleJoe Perches
Remove the trailing newline from the define of pr_fmt and add newlines to the uses. Miscellanea: o Convert bch_bkey_dump from multiple uses of pr_err to pr_cont as the earlier conversion was inappropriate done causing multiple lines to be emitted where only a single output line was desired o Use vsprintf extension %pV in bch_cache_set_error to avoid multiple line output where only a single line output was desired o Coalesce formats Fixes: 6ae63e3501c4 ("bcache: replace printk() by pr_*() routines") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27bcache: remove redundant variables i and nColin Ian King
Variables i and n are being assigned but are never used. They are redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Coly Li <colyli@suse.de> Addresses-Coverity: ("Unused value") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27Merge branch 'nvme-5.8' of git://git.infradead.org/nvme into for-5.8/driversJens Axboe
Pull NVMe updates from Christoph: "The second large batch of nvme updates: - t10 protection information support for nvme-rdma and nvmet-rdma (Israel Rukshin and Max Gurtovoy) - target side AEN improvements (Chaitanya Kulkarni) - various fixes and minor improvements all over, icluding the nvme part of the lpfc driver" * 'nvme-5.8' of git://git.infradead.org/nvme: (38 commits) lpfc: Fix return value in __lpfc_nvme_ls_abort lpfc: fix axchg pointer reference after free and double frees lpfc: Fix pointer checks and comments in LS receive refactoring nvme: set dma alignment to qword nvmet: cleanups the loop in nvmet_async_events_process nvmet: fix memory leak when removing namespaces and controllers concurrently nvmet-rdma: add metadata/T10-PI support nvmet: add metadata support for block devices nvmet: add metadata/T10-PI support nvme: add Metadata Capabilities enumerations nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len nvmet: rename nvmet_rw_len to nvmet_rw_data_len nvmet: add metadata characteristics for a namespace nvme-rdma: add metadata/T10-PI support nvme-rdma: introduce nvme_rdma_sgl structure nvme: introduce NVME_INLINE_METADATA_SG_CNT nvme: enforce extended LBA format for fabrics metadata nvme: introduce max_integrity_segments ctrl attribute nvme: make nvme_ns_has_pi accessible to transports nvme: introduce NVME_NS_METADATA_SUPPORTED flag ...
2020-05-27x86/apb_timer: Drop unused declaration and macroJohan Hovold
Drop an extern declaration that has never been used and a no longer needed macro. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200513100944.9171-2-johan@kernel.org
2020-05-27MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()YuanJunQing
Register "a1" is unsaved in this function, when CONFIG_TRACE_IRQFLAGS is enabled, the TRACE_IRQS_OFF macro will call trace_hardirqs_off(), and this may change register "a1". The changed register "a1" as argument will be send to do_fpe() and do_msa_fpe(). Signed-off-by: YuanJunQing <yuanjunqing66@163.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27net/mlx5: Add ability to read and write ECE optionsLeon Romanovsky
The end result of RDMA-CM ECE handshake is ECE options, which is needed to be used while configuring data QPs. Such options can come in any QP state, so add in/out fields to set and query ECE options. OUT fields: * create_qp() - default ECE options for that type of QP. * modify_qp() - enabled ECE options after QP state transition. IN fields: * create_qp() - create QP with this ECE option. * modify_qp() - requested options. For unconnected QPs, the FW will return an error if ECE is already configured with any options that not equal to previously set. Reviewed-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-05-27MIPS: mm: add page valid judgement in function pte_modifyBibo Mao
If original PTE has _PAGE_ACCESSED bit set, and new pte has no _PAGE_NO_READ bit set, we can add _PAGE_SILENT_READ bit to enable page valid bit. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27mm/memory.c: Add memory read privilege on page fault handlingBibo Mao
Here add pte_sw_mkyoung function to make page readable on MIPS platform during page fault handling. This patch improves page fault latency about 10% on my MIPS machine with lmbench lat_pagefault case. It is noop function on other arches, there is no negative influence on those architectures. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27mm/memory.c: Update local TLB if PTE entry existsBibo Mao
If two threads concurrently fault at the same page, the thread that won the race updates the PTE and its local TLB. For now, the other thread gives up, simply does nothing, and continues. It could happen that this second thread triggers another fault, whereby it only updates its local TLB while handling the fault. Instead of triggering another fault, let's directly update the local TLB of the second thread. Function update_mmu_tlb is used here to update local TLB on the second thread, and it is defined as empty on other arches. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27x86/apb_timer: Drop unused TSC calibrationJohan Hovold
Drop the APB-timer TSC calibration, which hasn't been used since the removal of Moorestown support by commit 1a8359e411eb ("x86/mid: Remove Intel Moorestown"). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200513100944.9171-1-johan@kernel.org
2020-05-27MIPS: Do not flush tlb page when updating PTE entryBibo Mao
It is not necessary to flush tlb page on all CPUs if suitable PTE entry exists already during page fault handling, just updating TLB is fine. Here redefine flush_tlb_fix_spurious_fault as empty on MIPS system. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27MIPS: ingenic: Default to a generic boardPaul Cercueil
Having a generic board option makes it possible to create a kernel that will run on various Ingenic SoCs, as long as the right devicetree is provided. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27MIPS: ingenic: Add support for GCW Zero prototypePaul Cercueil
Add support for the GCW Zero prototype. The only (?) difference is that it only has 256 MiB of RAM, compared to the 512 MiB of RAM of the retail device. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27ceph: flush release queue when handling caps for unknown inodeJeff Layton
It's possible for the VFS to completely forget about an inode, but for it to still be sitting on the cap release queue. If the MDS sends the client a cap message for such an inode, it just ignores it today, which can lead to a stall of up to 5s until the cap release queue is flushed. If we get a cap message for an inode that can't be located, then go ahead and flush the cap release queue. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/45532 Fixes: 1e9c2eb6811e ("ceph: delete stale dentry when last reference is dropped") Reported-and-Tested-by: Andrej Filipčič <andrej.filipcic@ijs.si> Suggested-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-05-27MIPS: ingenic: DTS: Add memory info of GCW ZeroPaul Cercueil
Add memory info of the GCW Zero in its devicetree. The bootloader generally provides this information, but since it is fixed to 512 MiB, it doesn't hurt to have it in devicetree. It allows the kernel to boot without any parameter passed as argument. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27MIPS: Loongson64: Switch to generic PCI driverJiaxun Yang
We can now enable generic PCI driver in Kconfig, and remove legacy PCI driver code. Radeon vbios quirk is moved to the platform folder to fit the new structure. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27MIPS: DTS: Loongson64: Add PCI Controller NodeJiaxun Yang
Add PCI Host controller node for Loongson64 with RS780E PCH dts. Note that PCI interrupts are probed via legacy way, as different machine have different interrupt arrangement, we can't cover all of them in dt. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27dt-bindings: Document Loongson PCI Host ControllerJiaxun Yang
PCI host controller found on Loongson PCHs and SoCs. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27PCI: Add Loongson PCI Controller supportJiaxun Yang
This controller can be found on Loongson-2K SoC, Loongson-3 systems with RS780E/LS7A PCH. The RS780E part of code was previously located at arch/mips/pci/ops-loongson3.c and now it can use generic PCI driver implementation. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27PCI: Don't disable decoding when mmio_always_on is setJiaxun Yang
Don't disable MEM/IO decoding when a device have both non_compliant_bars and mmio_always_on. That would allow us quirk devices with junk in BARs but can't disable their decoding. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27MIPS: BCM63xx: fix 6328 boot selection bitÁlvaro Fernández Rojas
MISC_STRAP_BUS_BOOT_SEL_SHIFT is 18 according to Broadcom's GPL source code. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27libceph: ignore pool overlay and cache logic on redirectsJerry Lee
OSD client should ignore cache/overlay flag if got redirect reply. Otherwise, the client hangs when the cache tier is in forward mode. [ idryomov: Redirects are effectively deprecated and no longer used or tested. The original tiering modes based on redirects are inherently flawed because redirects can race and reorder, potentially resulting in data corruption. The new proxy and readproxy tiering modes should be used instead of forward and readforward. Still marking for stable as obviously correct, though. ] Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/23296 URL: https://tracker.ceph.com/issues/36406 Signed-off-by: Jerry Lee <leisurelysw24@gmail.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-05-27erofs: code cleanup by removing ifdef macro surroundingChengguang Xu
Define erofs_listxattr and erofs_xattr_handlers to NULL when CONFIG_EROFS_FS_XATTR is not enabled, then we can remove many ugly ifdef macros in the code. Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Reviewed-by: Gao Xiang <hsiangkao@redhat.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Link: https://lore.kernel.org/r/20200526090343.22794-1-cgxu519@mykernel.net Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2020-05-27mac80211_hwsim: report the WIPHY_FLAG_SUPPORTS_5_10_MHZ capabilityRamon Fontes
Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com> Link: https://lore.kernel.org/r/20200515164640.97276-1-ramonreisfontes@gmail.com [fix indentation to use tabs] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: fix HT-Control field reception for management framesJohannes Berg
If we receive management frames with an HT-Control field, we cannot parse them properly, as we assume a fixed length management header. Since we don't even need the HTC field (for these frames, or really at all), just remove it at the beginning of RX. Reported-by: Haggai Abramovsky <haggai.abramovsky@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200526143346.cf5ce70521c5.I333251a084ec4cfe67b7ef7efe2d2f1a33883931@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27wireless: Use linux/stddef.h instead of stddef.hHauke Mehrtens
When compiling inside the kernel include linux/stddef.h instead of stddef.h. When I compile this header file in backports for power PC I run into a conflict with ptrdiff_t. I was unable to reproduce this in mainline kernel. I still would like to fix this problem in the kernel. Fixes: 6989310f5d43 ("wireless: Use offsetof instead of custom macro.") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20200521201422.16493-1-hauke@hauke-m.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: fix CFG82011_CRDA_SUPPORT still mentioning internal regdbPatrick Steinhardt
Back with commit c8c240e284b3 (cfg80211: reg: remove support for built-in regdb, 2015-10-15), support for using CFG80211_INTERNAL_REGDB was removed in favor of loading the regulatory database as firmware file. The documentation of CFG80211_CRDA_SUPPORT was not adjusted, though, which is why it still mentions mentions the old way of loading via the internal regulatory database. Remove it so that the kernel option only mentions using the firmware file. Signed-off-by: Patrick Steinhardt <ps@pks.im> Link: https://lore.kernel.org/r/c56e60207fbd0512029de8c6276ee00f73491924.1589732954.git.ps@pks.im Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: Add support to configure TID specific Tx rate configurationTamizh Chelvam
This patch adds support to configure per TID Tx Rate configuration through NL80211_TID_CONFIG_ATTR_TX_RATE* attributes. And it uses nl80211_parse_tx_bitrate_mask api to validate the Tx rate mask. Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1589357504-10175-1-git-send-email-tamizhr@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: allow SA-QUERY processing in userspaceJohannes Berg
As discussed with Mathy almost two years ago in http://lore.kernel.org/r/20180806224857.14853-1-Mathy.Vanhoef@cs.kuleuven.be we should let userspace process SA-QUERY frames if it wants to, so that it can handle OCV (operating channel validation) which mac80211 doesn't know how to. Evidently I had been expecting Mathy to (re)send such a patch, but he never did, perhaps expecting me to do it after our discussion. In any case, this came up now with OCV getting more attention, so move the code around as discussed there to let userspace handle it, and do it properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200526103131.1f9cf7e5b6db.Iae5b42b09ad2b1cbcbe13492002c43f0d1d51dfc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: add ability to report TX status for control port TXMarkus Theil
This adds the necessary capabilities in nl80211 to allow drivers to assign a cookie to control port TX frames (returned via extack in the netlink ACK message of the command) and then later report the frame's status. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200508144202.7678-2-markus.theil@tu-ilmenau.de [use extack cookie instead of explicit message, recombine patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507185907.GA15102@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507183909.GA12993@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: Add new AMPDU factor macro for HE peer capsTamizh Chelvam
Add IEEE80211_HE_VHT_MAX_AMPDU_FACTOR and IEEE80211_HE_HT_MAX_AMPDU_FACTOR as per spec to use for peer max ampdu factor. Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1588611900-21185-1-git-send-email-tamizhr@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27ieee80211: S1G definesThomas Pedersen
These are found in IEEE-802.11ah-2016. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-5-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: support scan frequencies in KHzThomas Pedersen
If the driver advertises NL80211_EXT_FEATURE_SCAN_FREQ_KHZ userspace can omit NL80211_ATTR_SCAN_FREQUENCIES in favor of an NL80211_ATTR_SCAN_FREQ_KHZ. To get scan results in KHz userspace must also set the NL80211_SCAN_FLAG_FREQ_KHZ. This lets nl80211 remain compatible with older userspaces while not requring and sending redundant (and potentially incorrect) scan frequency sets. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-4-thomas@adapt-ip.com [use just nla_nest_start() (not _noflag) for NL80211_ATTR_SCAN_FREQ_KHZ] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: add KHz frequency offset for most wifi commandsThomas Pedersen
cfg80211 recently gained the ability to understand a frequency offset component in KHz. Expose this in nl80211 through the new attributes NL80211_ATTR_WIPHY_FREQ_OFFSET, NL80211_FREQUENCY_ATTR_OFFSET, NL80211_ATTR_CENTER_FREQ1_OFFSET, and NL80211_BSS_FREQUENCY_OFFSET. These add support to send and receive a KHz offset component with the following NL80211 commands: - NL80211_CMD_FRAME - NL80211_CMD_GET_SCAN - NL80211_CMD_AUTHENTICATE - NL80211_CMD_ASSOCIATE - NL80211_CMD_CONNECT Along with any other command which takes a chandef, ie: - NL80211_CMD_SET_CHANNEL - NL80211_CMD_SET_WIPHY - NL80211_CMD_START_AP - NL80211_CMD_RADAR_DETECT - NL80211_CMD_NOTIFY_RADAR - NL80211_CMD_CHANNEL_SWITCH - NL80211_JOIN_IBSS - NL80211_CMD_REMAIN_ON_CHANNEL - NL80211_CMD_JOIN_OCB - NL80211_CMD_JOIN_MESH - NL80211_CMD_TDLS_CHANNEL_SWITCH If the driver advertises a band containing channels with frequency offset, it must also verify support for frequency offset channels in its cfg80211 ops, or return an error. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add KHz variants of frame RX APIThomas Pedersen
Drivers may wish to report the RX frequency in units of KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with cfg80211_rx_mgmt() so exisiting drivers which can't report KHz anyway don't need to change. Add a similar wrapper for cfg80211_report_obss_beacon() so the frequency units stay somewhat consistent. This doesn't actually change the nl80211 API yet. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-2-thomas@adapt-ip.com [fix mac80211 calling the non-khz version of obss beacon report, drop trace point name changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: simplify peer specific TID configurationSergey Matyukevich
Current rule for applying TID configuration for specific peer looks overly complicated. No need to reject new TID configuration when override flag is specified. Another call with the same TID configuration, but without override flag, allows to apply new configuration anyway. Use the same approach as for the 'all peers' case: if override flag is specified, then reset existing TID configuration and immediately apply a new one. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-5-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add support for TID specific AMSDU configurationSergey Matyukevich
This patch adds support to control per TID MSDU aggregation using the NL80211_TID_CONFIG_ATTR_AMSDU_CTRL attribute. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-4-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: fix variable names in TID config methodsSergey Matyukevich
Fix all variable names from 'tid' to 'tids' to avoid confusion. Now this is not TID number, but TID mask. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-3-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: fix mask type in cfg80211_tid_cfg structureSergey Matyukevich
TIDs mask type is u64 in wiphy settings and nl80211 processing, see: - wiphy TIDs mask sizes in tid_config_support structure - prepare driver command in parse_tid_conf Use the same type for TIDs mask in cfg80211_tid_cfg. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-2-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27ALSA: hda/realtek - Add new codec supported for ALC287Kailang Yang
Enable new codec supported for ALC287. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/dcf5ce5507104d0589a917cbb71dc3c6@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-05-26hwmon: (nct7904) Set default timeoutYuechao Zhao
The timeout module parameter should not be used for setting the default timeout. Because, if you set the timeout = 0, the default timeout will be meaningless. And the timeout module parameter of 0 means "no timeout module parameter specified". Signed-off-by: Yuechao Zhao <yuechao.zhao@advantech.com.cn> Link: https://lore.kernel.org/r/1590560219-41328-1-git-send-email-yuechao.zhao@advantech.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-26net: phy: at803x: add cable diagnostics support for ATH9331 and ATH8032Oleksij Rempel
Add support for Atheros 100Base-T PHYs. The only difference seems to be the ability to test 2 pairs instead of 4 and the lack of 1000Base-T specific register. Only the ATH9331 was tested with this patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26crypto: chelsio/chtls: properly set tp->lsndtimeEric Dumazet
TCP tp->lsndtime unit/base is tcp_jiffies32, not tcp_time_stamp() Fixes: 36bedb3f2e5b ("crypto: chtls - Inline TLS record Tx") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ayush Sawal <ayush.sawal@chelsio.com> Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 13:45:55 +0000