| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes:
- amd/pmf: Fix STT limits
- asus-laptop: Fix an uninitialized variable
- intel_pmc_ipc: Allow building without ACPI
- mlxbf-bootctl: Use sysfs_emit_at() in secure_boot_fuse_state_show()
- msi-wmi-platform: Add locking to workaround ACPI firmware bug
New HW support:
- alienware-wmi-wmax:
- Extended thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
- G-Mode support to Alienware m16 R1
- x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data"
* tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug
platform/x86: msi-wmi-platform: Rename "data" variable
platform/x86: alienware-wmi-wmax: Extend support to more laptops
platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1
platform/x86: amd: pmf: Fix STT limits
mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()
platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data
platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbols
asus-laptop: Fix an uninitialized variable
platform/x86: intel_pmc_ipc: add option to build without ACPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
scsi: megaraid_sas: Block zero-length ATA VPD inquiry
scsi: scsi_transport_srp: Replace min/max nesting with clamp()
scsi: ufs: core: Add device level exception support
scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
scsi: pm80xx: Set phy_attached to zero when device is gone
scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
scsi: ufs: exynos: Move phy calls to .exit() callback
scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
scsi: ufs: exynos: Ensure consistent phy reference counts
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
scsi: ufs: exynos: Move UFS shareability value to drvdata
scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
scsi: iscsi: Fix missing scsi_host_put() in error path
scsi: ufs: core: Fix a race condition related to device commands
scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes
scsi: hisi_sas: Enable force phy when SATA disk directly connected
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix how sense data from the sense data for successfull NCQ commands
log page is used to fully initialize the result_tf of a completed
command, so that the sense data returned to the scsi layer is fully
initialized with all the device provided information (from Niklas)
* tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: Save all fields from sense data descriptor
|
|
Pull XFS fixes from Carlos Maiolino:
"This mostly includes fixes and documentation for the zoned allocator
feature merged during previous merge window, but it also adds a sysfs
tunable for the zone garbage collector.
There is also a fix for a regression to the RT device that we'd like
to fix ASAP now that we're getting more users on the RT zoned
allocator"
* tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document zoned rt specifics in admin-guide
xfs: fix fsmap for internal zoned devices
xfs: Fix spelling mistake "drity" -> "dirty"
xfs: compute buffer address correctly in xmbuf_map_backing_mem
xfs: add tunable threshold parameter for triggering zone GC
xfs: mark xfs_buf_free as might_sleep()
xfs: remove the leftover xfs_{set,clear}_li_failed infrastructure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- handle encoded read ioctl returning EAGAIN so it does not mistakenly
free the work structure
- escape subvolume path in mount option list so it cannot be wrongly
parsed when the path contains ","
- remove folio size assertions when writing super block to device with
enabled large folios
* tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove folio order ASSERT()s in super block writeback path
btrfs: correctly escape subvol in btrfs_show_options()
btrfs: ioctl: don't free iov when btrfs_encoded_read() returns -EAGAIN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix adding zero initialization of slab->obj_ext to prevent
crashes with allocation profiling (Suren Baghdasaryan)
* tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: ensure slab->obj_exts is clear in a newly allocated slab page
|
|
Document the lifetime, nolifetime and max_open_zones mount options
added for zoned rt file systems.
Also add documentation describing the max_open_zones sysfs attribute
exposed in /sys/fs/xfs/<dev>/zoned/
Fixes: 4e4d52075577 ("xfs: add the zoned space allocator")
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- A couple of maintainers updates
- Remove obsolete Renesas TPU timer binding
- Add i.MX94 support to nxp,sysctr-timer and fsl,irqsteer
- Add support for 'data-lanes' property in fsl,imx8mq-nwl-dsi binding
* tag 'devicetree-fixes-for-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: soc: fsl: fsl,ls1028a-reset: Fix maintainer entry
dt-bindings: timer: renesas,tpu: remove obsolete binding
dt-bindings: timer: nxp,sysctr-timer: Add i.MX94 support
dt-bindings: interrupt-controller: fsl,irqsteer: Add i.MX94 support
dt-bindings: display: nwl-dsi: Allow 'data-lanes' property for port@1
dt-bindings: xilinx: Remove myself from maintainership
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Disable ahash request chaining as it causes problems with the sa2ul
driver
- Fix a couple of bugs in the new scomp stream freeing code
- Fix an old caam refcount underflow that is possibly showing up now
because of the new parallel self-tests
- Fix regression in the tegra driver
* tag 'v6.15-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Disable request chaining
crypto: scomp - Fix wild memory accesses in scomp_free_streams
crypto: caam/qi - Fix drv_ctx refcount bug
crypto: scomp - Fix null-pointer deref when freeing streams
crypto: tegra - Fix IV usage for AES ECB
|
|
Filesystems with an internal zoned rt section use xfs_rtblock_t values
that are relative to the start of the data device. When fsmap reports
on internal rt sections, it reports the space used by the data section
as "OWN_FS".
Unfortunately, the logic for resuming a query isn't quite right, so
xfs/273 fails because it stress-tests GETFSMAP with a single-record
buffer. If we enter the "report fake space as OWN_FS" block with a
nonzero key[0].fmr_length, we should add that to key[0].fmr_physical
and recheck if we still need to emit the fake record. We should /not/
just return 0 from the whole function because that prevents all rmap
record iteration.
If we don't enter that block, the resumption is still wrong.
keys[*].fmr_physical is a reflection of what we copied out to userspace
on a previous query, which means that it already accounts for rgstart.
It is not correct to add rtstart_daddr when computing start_rtb or
end_rtb, so stop that.
While we're at it, add a xfs_has_zoned to make it clear that this is a
zoned filesystem thing.
Fixes: e50ec7fac81aa2 ("xfs: enable fsmap reporting for internal RT devices")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
There is a spelling mistake in fs/xfs/xfs_log.c. Fix it.
Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
When filling the taskfile result for a successful NCQ command, we use
the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
However, the SDB FIS only has fields STATUS and ERROR.
For a successful NCQ command that has sense data, we will have a
successful sense data descriptor, in the Sense Data for Successful NCQ
Commands log.
Since we have access to additional taskfile result fields, fill in these
additional fields in qc->result_tf.
This matches how for failing/aborted NCQ commands, we will use e.g.
ahci_qc_fill_rtf() to fill in some fields, but then for the command that
actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
provides additional fields, saving additional fields/overriding the
qc->result_tf that was fetched using ahci_qc_fill_rtf().
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The ACPI byte code inside the ACPI control method responsible for
handling the WMI method calls uses a global buffer for constructing
the return value, yet the ACPI control method itself is not marked
as "Serialized".
This means that calling WMI methods on this WMI device is not
thread-safe, as concurrent WMI method calls will corrupt the global
buffer.
Fix this by serializing the WMI method calls using a mutex.
Cc: stable@vger.kernel.org # 6.x.x: 912d614ac99e: platform/x86: msi-wmi-platform: Rename "data" variable
Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes to the AMD translation library for the MI300 side of things:
- Use the row[13] bit when calculating the memory row to retire
- Mask the physical row address in order to avoid creating duplicate
error records"
* tag 'edac_urgent_for_v6.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/FMPM: Get masked address
RAS/AMD/ATL: Include row[13] bit in row retirement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs fix from Jan Kara:
"Fix a case where isofs could be reading beyond end of the passed
file handle if its type was incorrectly set"
* tag 'fs_for_v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: Prevent the use of too small fid
|
|
Rename the "data" variable inside msi_wmi_platform_read() to avoid
a name collision when the driver adds support for a state container
struct (that is to be called "data" too) in the future.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Extend thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-2-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some users report the Alienware m16 R1 models, support G-Mode. This was
manually verified by inspecting their ACPI tables.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-1-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
I have done quite some review on hugetlb code over the years, and some
work on it as well, the latest being the hugetlb pagewalk unification
which is a work in progress, and touches hugetlb code to great lengths.
HugeTLB does not have many reviewers, so I would like to help out by
offering myself as an official Reviewer.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Link: https://lkml.kernel.org/r/20250409082452.269180-1-osalvador@suse.de
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
- Fix hang in bnxt_re due to miscomputing the budget
- Avoid a -Wformat-security message in dev_set_name()
- Avoid an unused definition warning in fs.c with some kconfigs
- Fix error handling in usnic and remove IS_ERR_OR_NULL() usage
- Regression in RXE support foudn by blktests due to missing ODP
exclusions
- Set the dma_segment_size on HNS so it doesn't corrupt DMA when using
very large IOs
- Move a INIT_WORK to near when the work is allocated in cm.c to fix a
racey crash where work in progress was being init'd
- Use __GFP_NOWARN to not dump in kvcalloc() if userspace requests a
very big MR
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: Remove unusable nq variable
RDMA/core: Silence oversized kvmalloc() warning
RDMA/cma: Fix workqueue crash in cma_netevent_work_handler
RDMA/hns: Fix wrong maximum DMA segment size
RDMA/rxe: Fix null pointer dereference in ODP MR check
RDMA/mlx5: Fix compilation warning when USER_ACCESS isn't set
RDMA/usnic: Fix passing zero to PTR_ERR in usnic_ib_pci_probe()
RDMA/ucaps: Avoid format-security warning
RDMA/bnxt_re: Fix budget handling of notification queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix NULL pointer dereference in virtiofs
- Fix slab OOB access in hfs/hfsplus
- Only create /proc/fs/netfs when CONFIG_PROC_FS is set
- Fix getname_flags() to initialize pointer correctly
- Convert dentry flags to enum
- Don't allow datadir without lowerdir in overlayfs
- Use namespace_{lock,unlock} helpers in dissolve_on_fput() instead of
plain namespace_sem so unmounted mounts are properly cleaned up
- Skip unnecessary ifs_block_is_uptodate check in iomap
- Remove an unused forward declaration in overlayfs
- Fix devpts uid/gid handling after converting to the new mount api
- Fix afs_dynroot_readdir() to not use the RCU read lock
- Fix mount_setattr() and open_tree_attr() to not pointlessly do path
lookup or walk the mount tree if no mount option change has been
requested
* tag 'vfs-6.15-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: use namespace_{lock,unlock} in dissolve_on_fput()
iomap: skip unnecessary ifs_block_is_uptodate check
fs: Fix filename init after recent refactoring
netfs: Only create /proc/fs/netfs with CONFIG_PROC_FS
mount: ensure we don't pointlessly walk the mount tree
dcache: convert dentry flag macros to enum
afs: Fix afs_dynroot_readdir() to not use the RCU read lock
hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key
virtiofs: add filesystem context source name check
devpts: Fix type for uid and gid params
ovl: remove unused forward declaration
ovl: don't allow datadir only
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A couple of fixes and the usual tooling header updates:
- fix a build error on ARM64 when libunwind is requested
- fix an infinite loop with branch stack on AMD Zen3
- sync tooling headers with the kernel source"
* tag 'perf-tools-fixes-for-v6.15-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Remove evsel__handle_error_quirks()
perf libunwind arm64: Fix missing close parens in an if statement
tools headers: Update the arch/x86/lib/memset_64.S copy with the kernel sources
tools headers: Update the x86 headers with the kernel sources
tools headers: Update the linux/unaligned.h copy with the kernel sources
tools headers: Update the uapi/asm-generic/mman-common.h copy with the kernel sources
tools headers: Update the uapi/linux/prctl.h copy with the kernel sources
tools headers: Update the syscall table with the kernel sources
tools headers: Update the VFS headers with the kernel sources
tools headers: Update the uapi/linux/perf_event.h copy with the kernel sources
tools headers: Update the socket headers with the kernel sources
tools headers: Update the KVM headers with the kernel sources
|
|
ktest recently reported crashes while running several buffered io tests
with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack.
The signature indicates an invalid address dereference with low bits of
slab->obj_exts being set. The bits were outside of the range used by
page_memcg_data_flags and objext_flags and hence were not masked out
by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts.
The typical crash log looks like this:
00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
00510 Mem abort info:
00510 ESR = 0x0000000096000045
00510 EC = 0x25: DABT (current EL), IL = 32 bits
00510 SET = 0, FnV = 0
00510 EA = 0, S1PTW = 0
00510 FSC = 0x05: level 1 translation fault
00510 Data abort info:
00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000
00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0
00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000
00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
00510 Internal error: Oops: 0000000096000045 [#1] SMP
00510 Modules linked in:
00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE
00510 Hardware name: linux,dummy-virt (DT)
00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190
00510 lr : __kmalloc_noprof+0x150/0x310
00510 sp : ffffff80c87df6c0
00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200
00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001
00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180
00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000
00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700
00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006
00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58
00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556
00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060
00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000
00510 Call trace:
00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P)
00510 __kmalloc_noprof+0x150/0x310
00510 __bch2_folio_create+0x5c/0xf8
00510 bch2_folio_create+0x2c/0x40
00510 bch2_readahead+0xc0/0x460
00510 read_pages+0x7c/0x230
00510 page_cache_ra_order+0x244/0x3a8
00510 page_cache_async_ra+0x124/0x170
00510 filemap_readahead.isra.0+0x58/0xa0
00510 filemap_get_pages+0x454/0x7b0
00510 filemap_read+0xdc/0x418
00510 bch2_read_iter+0x100/0x1b0
00510 vfs_read+0x214/0x300
00510 ksys_read+0x6c/0x108
00510 __arm64_sys_read+0x20/0x30
00510 invoke_syscall.constprop.0+0x54/0xe8
00510 do_el0_svc+0x44/0xc8
00510 el0_svc+0x18/0x58
00510 el0t_64_sync_handler+0x104/0x130
00510 el0t_64_sync+0x154/0x158
00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881)
00510 ---[ end trace 0000000000000000 ]---
00510 Kernel panic - not syncing: Oops: Fatal exception
00510 SMP: stopping secondary CPUs
00510 Kernel Offset: disabled
00510 CPU features: 0x0000,000000e0,00000410,8240500b
00510 Memory Limit: none
Investigation indicates that these bits are already set when we allocate
slab page and are not zeroed out after allocation. We are not yet sure
why these crashes start happening only recently but regardless of the
reason, not initializing a field that gets used later is wrong. Fix it
by initializing slab->obj_exts during slab page allocation.
Fixes: 21c690a349ba ("mm: introduce slabobj_ext to support slab object extensions")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250411155737.1360746-1-surenb@google.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Prior to commit e614a00117bc2d, xmbuf_map_backing_mem relied on
folio_file_page to return the base page for the xmbuf's loff_t in the
xfile, and set b_addr to the page_address of that base page.
Now that folio_file_page has been removed from xmbuf_map_backing_mem, we
always set b_addr to the folio_address of the folio. This is correct
for the situation where the folio size matches the buffer size, but it's
totally wrong if tmpfs uses large folios. We need to use
offset_in_folio here.
Found via xfs/801, which demonstrated evidence of corruption of an
in-memory rmap btree block right after initializing an adjacent block.
Fixes: e614a00117bc2d ("xfs: cleanup mapping tmpfs folios into the buffer cache")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Presently we start garbage collection late - when we start running
out of free zones to backfill max_open_zones. This is a reasonable
default as it minimizes write amplification. The longer we wait,
the more blocks are invalidated and reclaim cost less in terms
of blocks to relocate.
Starting this late however introduces a risk of GC being outcompeted
by user writes. If GC can't keep up, user writes will be forced to
wait for free zones with high tail latencies as a result.
This is not a problem under normal circumstances, but if fragmentation
is bad and user write pressure is high (multiple full-throttle
writers) we will "bottom out" of free zones.
To mitigate this, introduce a zonegc_low_space tunable that lets the
user specify a percentage of how much of the unused space that GC
should keep available for writing. A high value will reclaim more of
the space occupied by unused blocks, creating a larger buffer against
write bursts.
This comes at a cost as write amplification is increased. To
illustrate this using a sample workload, setting zonegc_low_space to
60% avoids high (500ms) max latencies while increasing write
amplification by 15%.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_free can call vunmap, which can sleep. The vunmap path is an
unlikely one, so add might_sleep to ensure calling xfs_buf_free from
atomic context gets caught more easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Marking a log item as failed kept a buffer reference around for
resubmission of inode and dquote items.
For inode items commit 298f7bec503f3 ("xfs: pin inode backing buffer to
the inode log item") started pinning the inode item buffers
unconditionally and removed the need for this. Later commit acc8f8628c37
("xfs: attach dquot buffer to dquot log item buffer") did the same for
dquot items but didn't fully clean up the xfs_clear_li_failed side
for them. Stop adding the extra pin for dquot items and remove the
helpers.
This happens to fix a call to xfs_buf_free with the AIL lock held,
which would be incorrect for the unlikely case freeing the buffer
ends up calling vfree.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Properly handle errors when file-backed I/O fails
- Fix compilation issues on ARM platform (arm-linux-gnueabi)
- Fix parsing of encoded extents
- Minor cleanup
* tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove duplicate code
erofs: fix encoded extents handling
erofs: add __packed annotation to union(__le16..)
erofs: set error to bio if file-backed IO fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix build of memblock test.
Add missing stubs for mutex and free_reserved_area() to memblock
tests"
* tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: Fix mutex related build error
|
|
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 5872331b3d91 ("ext4: fix potential negative array index in do_split()")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Documentation and implementation of the ext4 super block have
slightly diverged: Padding has been removed in order to make room for
new fields that are still missing in the documentation.
Add the new fields s_encryption_level, s_first_error_errorcode,
s_last_error_errorcode to the documentation of the ext4 super block.
Fixes: f542fbe8d5e8 ("ext4 crypto: reserve codepoints used by the ext4 encryption feature")
Fixes: 878520ac45f9 ("ext4: save the error code which triggered an ext4_error() in the superblock")
Signed-off-by: Tom Vierjahn <tom.vierjahn@acm.org>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20250324221004.5268-1-tom.vierjahn@acm.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
|
|
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
|
|
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fcd4 ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/
Fixes: ff5c9c576e754 ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"A set of fixes for pwm core and various drivers
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was
found because this triggered a warning with clang, the two others by
looking for similar issues in other drivers.
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner
cases are better understood and the code is fixed accordingly"
* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: fsl-ftm: Handle clk_get_rate() returning 0
pwm: rcar: Improve register calculation
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
|
|
Disable hash request chaining in case a driver that copies an
ahash_request object by hand accidentally triggers chaining.
Reported-by: Manorit Chawdhry <m-chawdhry@ti.com>
Fixes: f2ffe5a9183d ("crypto: hash - Add request chaining API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to use scomp_free_streams to free the partially allocted
streams in the allocation error path, move the alg->stream assignment
to the beginning. Also check for error pointers in scomp_free_streams
before freeing the ctx.
Finally set alg->stream to NULL to not break subsequent attempts
to allocate the streams.
Fixes: 3d72ad46a23a ("crypto: acomp - Move stream management into scomp layer")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Co-developed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In the case of apply_to_existing_page_range(), apply_to_pte_range() is
reached with 'create' set to false. When !create, the loop over the PTE
page table is broken.
apply_to_pte_range() will only move to the next PTE entry if 'create' is
true or if the current entry is not pte_none().
This means that the user of apply_to_existing_page_range() will not have
'fn' called for any entries after the first pte_none() in the PTE page
table.
Fix the loop logic in apply_to_pte_range().
There are no known runtime issues from this, but the fix is trivial enough
for stable@ even without a known buggy user.
Link: https://lkml.kernel.org/r/20250409094043.1629234-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: be1db4753ee6 ("mm/memory.c: add apply_to_existing_page_range() helper")
Cc: Daniel Axtens <dja@axtens.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Following build warning comes up for cow test as 'transferred' variable has
not been initialized. Fix the warning via zero init for the variable.
CC cow
cow.c: In function `do_test_vmsplice_in_parent':
cow.c:365:61: warning: `transferred' may be used uninitialized [-Wmaybe-uninitialized]
365 | cur = read(fds[0], new + total, transferred - total);
| ~~~~~~~~~~~~^~~~~~~
cow.c:296:29: note: `transferred' was declared here
296 | ssize_t cur, total, transferred;
| ^~~~~~~~~~~
CC compaction_test
CC gup_longterm
Link: https://lkml.kernel.org/r/20250409095006.1422620-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
alloc_pages_bulk_node() may partially succeed and allocate fewer than the
requested nr_pages. There are several conditions under which this can
occur, but we have encountered the case where CONFIG_PAGE_OWNER is enabled
causing all bulk allocations to always fallback to single page allocations
due to commit 187ad460b841 ("mm/page_alloc: avoid page allocator recursion
with pagesets.lock held").
Currently vm_module_tags_populate() immediately fails when
alloc_pages_bulk_node() returns fewer than the requested number of pages.
When this happens memory allocation profiling gets disabled, for example
[ 14.297583] [9: modprobe: 465] Failed to allocate memory for allocation tags in the module scsc_wlan. Memory allocation profiling is disabled!
[ 14.299339] [9: modprobe: 465] modprobe: Failed to insmod '/vendor/lib/modules/scsc_wlan.ko' with args '': Out of memory
This patch causes vm_module_tags_populate() to retry bulk allocations for
the remaining memory instead of failing immediately which will avoid the
disablement of memory allocation profiling.
Link: https://lkml.kernel.org/r/20250409225111.3770347-1-tjmercier@google.com
Fixes: 0f9b685626da ("alloc_tag: populate memory for module tags as needed")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reported-by: Janghyuck Kim <janghyuck.kim@samsung.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As recent contributions where made with the @ideasonboard.com email, any
reply would fail. Add the proper address to map this old one.
Link: https://lkml.kernel.org/r/20250328-mailmap-v2-v2-1-bdc69d2193ca@yoseli.org
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We got a late smatch warning and some additional review feedback.
smatch warnings:
mm/memory.c:1428 copy_page_range() error: uninitialized symbol 'pfn'.
We actually use the pfn only when it is properly initialized; however, we
may pass an uninitialized value to a function -- although it will not use
it that likely still is UB in C.
So let's just fix it by always initializing pfn in the caller of
track_pfn_copy(), and improving the documentation of track_pfn_copy().
While at it, clarify the doc of untrack_pfn_copy(), that internal checks
make sure if we actually have to untrack anything.
Link: https://lkml.kernel.org/r/20250408085950.976103-1-david@redhat.com
Fixes: dc84bc2aba85 ("x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202503270941.IFILyNCX-lkp@intel.com/
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
filemap_get_folios_contig() is supposed to return distinct folios found
within [start, end]. Large folios in the Xarray become multi-index
entries. xas_next() can iterate through the sub-indexes before finding a
sibling entry and breaking out of the loop.
This can result in a returned folio_batch containing an indeterminate
number of duplicate folios, which forces the callers to skeptically handle
the returned batch. This is inefficient and incurs a large maintenance
overhead.
We can fix this by calling xas_advance() after we have successfully adding
a folio to the batch to ensure our Xarray is positioned such that it will
correctly find the next folio - similar to filemap_get_read_batch().
Link: https://lkml.kernel.org/r/Z-8s1-kiIDkzgRbc@fedora
Fixes: 35b471467f88 ("filemap: add filemap_get_folios_contig()")
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reported-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Closes: https://lkml.kernel.org/r/b714e4de-2583-4035-b829-72cfb5eb6fc6@gmx.com
Tested-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
