| Age | Commit message (Collapse) | Author |
|---|
|
Setting interrupt affinity on inactive interrupts is inconsistent when
hierarchical irq domains are enabled. The core code should just store the
affinity and not call into the irq chip driver for inactive interrupts
because the chip drivers may not be in a state to handle such requests.
X86 has a hacky workaround for that but all other irq chips have not which
causes problems e.g. on GIC V3 ITS.
Instead of adding more ugly hacks all over the place, solve the problem in
the core code. If the affinity is set on an inactive interrupt then:
- Store it in the irq descriptors affinity mask
- Update the effective affinity to reflect that so user space has
a consistent view
- Don't call into the irq chip driver
This is the core equivalent of the X86 workaround and works correctly
because the affinity setting is established in the irq chip when the
interrupt is activated later on.
Note, that this is only effective when hierarchical irq domains are enabled
by the architecture. Doing it unconditionally would break legacy irq chip
implementations.
For hierarchial irq domains this works correctly as none of the drivers can
have a dependency on affinity setting in inactive state by design.
Remove the X86 workaround as it is not longer required.
Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts")
Reported-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com
Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
[ tglx: Distangled it from the mess in -next ]
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: hch@lst.de
Link: https://lkml.kernel.org/r/20200716084747.8034-1-miaoqinglang@huawei.com
|
|
Add the OPP tables for DSI and MDP based on the perf state/clk
requirements, and add the power-domains property to specify the
scalable power domain.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1594292674-15632-5-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add the OPP tables for DSI and MDP based on the perf state/clk
requirements, and add the power-domains property to specify the
scalable power domain.
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1594292674-15632-4-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
When nfc_register_device fails in nci_register_device,
destroy_workqueue() shouled be called to destroy ndev->tx_wq.
Fixes: 3c1c0f5dc80b ("NFC: NCI: Fix nci_register_device init sequence")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Doug Berger says:
====================
net: bcmgenet: fix WAKE_FILTER resume from deep sleep
The WAKE_FILTER logic can only wake the system from the standby
power state. However, some systems that include the GENET IP
support deeper power saving states and the driver should suspend
and resume correctly from those states as well.
This commit set squashes a few issues uncovered while testing
suspend and resume from these deep sleep states.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Hardware Filter Block RAM may not be preserved when the GENET
block is reset during a deep sleep, so it is not sufficient to
only backup and restore the enables.
This commit clears out the HFB block and reprograms the rxnfc
rules when the system resumes from a suspended state. To support
this the bcmgenet_hfb_create_rxnfc_filter() function is modified
to access the register space directly so that it can't fail due
to memory allocation issues.
Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the GENET driver resumes from deep sleep the UMAC_CMD
register may not be accessible and therefore should not be
accessed from bcmgenet_wol_power_up_cfg() if the GENET has
been reset.
This commit adds a check of the RBUF_ACPI_EN flag when Wake
on Filter is enabled. A clear flag indicates that the GENET
hardware must have been reset so the remainder of the
hardware programming is bypassed.
Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the GENET driver resumes from deep sleep the UMAC_CMD
register may not be accessible and therefore should not be
accessed from bcmgenet_wol_power_up_cfg() if the GENET has
been reset.
This commit adds a check of the MPD_EN flag when Wake on
Magic Packet is enabled. A clear flag indicates that the
GENET hardware must have been reset so the remainder of the
hardware programming is bypassed.
Fixes: 1a1d5106c1e3 ("net: bcmgenet: move clk_wol management to bcmgenet_wol")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix ip_defrag.sh when CONFIG_NF_DEFRAG_IPV6=m:
$ sudo ./ip_defrag.sh
+ set -e
+ mktemp -u XXXXXX
+ readonly NETNS=ns-rGlXcw
+ trap cleanup EXIT
+ setup
+ ip netns add ns-rGlXcw
+ ip -netns ns-rGlXcw link set lo up
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_high_thresh=9000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_low_thresh=7000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_time=1
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_high_thresh=9000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_low_thresh=7000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_time=1
+ ip netns exec ns-rGlXcw sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000
+ cleanup
+ ip netns del ns-rGlXcw
$ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
ls: cannot access '/proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh': No such file or directory
$ sudo modprobe nf_defrag_ipv6
$ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
-rw-r--r-- 1 root root 0 Jul 14 12:34 /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev)
should be called to free the ndev created earlier. Otherwise, a memleak
will occur.
Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an expiration delta falls into the last level of the wheel, that delta
has be compared against the maximum possible delay and reduced to fit in if
necessary.
However instead of comparing the delta against the maximum, the code
compares the actual expiry against the maximum. Then instead of fixing the
delta to fit in, it sets the maximum delta as the expiry value.
This can result in various undesired outcomes, the worst possible one
being a timer expiring 15 days ahead to fire immediately.
Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.org
|
|
When vlan_newlink call register_vlan_dev fails, it might return error
with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should
free the memory. But currently rtnl_newlink only free the memory which
state is NETREG_UNINITIALIZED.
BUG: memory leak
unreferenced object 0xffff8881051de000 (size 4096):
comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s)
hex dump (first 32 bytes):
76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00 vlan2...........
00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00 .E(.............
backtrace:
[<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline]
[<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574
[<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline]
[<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline]
[<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929
[<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067
[<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329
[<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397
[<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460
[<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469
[<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
[<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329
[<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918
[<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline]
[<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672
[<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352
[<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406
[<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439
[<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
[<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.9-rc1
This adds missing SoC IDs for Tegra186 and Tegra194 and fixes a typo in
a warning message.
* tag 'tegra-for-5.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Fix typo in APB MISC warning
soc/tegra: fuse: Add Tegra186 and Tegra194 SoC IDs
Link: https://lore.kernel.org/r/20200717161300.1661002-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
memory: tegra: Changes for v5.9-rc1
This contains the Tegra210 EMC frequency scaling support that didn't
make it into v5.8. In addition there are a couple of cleanups and minor
fixes.
* tag 'tegra-for-5.9-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add Tegra132 compatible string match
memory: tegra: Fix KCONFIG variables for Tegra186 and Tegra194
memory: tegra: Delete some dead code
memory: tegra: Avoid unused function warnings
memory: tegra: Drop <linux/clk-provider.h>
memory: tegra: Fix an error handling path in tegra186_emc_probe()
memory: tegra30-emc: Poll EMC-CaR handshake instead of waiting for interrupt
memory: tegra20-emc: Poll EMC-CaR handshake instead of waiting for interrupt
memory: tegra: Support derated timings on Tegra210
memory: tegra: Add EMC scaling sequence code for Tegra210
memory: tegra: Add EMC scaling support code for Tegra210
memory: tegra: Make debugfs permissions human-readable
Link: https://lore.kernel.org/r/20200717161300.1661002-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.9-rc1
This has a few cleanups and the addition of a new mechanism to query
debug information from the BPMP.
* tag 'tegra-for-5.9-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Update BPMP ABI
firmware: tegra: Add support for in-band debug
firmware: tegra: Prepare for supporting in-band debugfs
firmware: tegra: Use consistent return variable name
firmware: tegra: Add return code checks and increase debugfs size
Link: https://lore.kernel.org/r/20200717161300.1661002-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
compeletion")
Reverting commit d03727b248d0 "NFSv4 fix CLOSE not waiting for
direct IO compeletion". This patch made it so that fput() by calling
inode_dio_done() in nfs_file_release() would wait uninterruptably
for any outstanding directIO to the file (but that wait on IO should
be killable).
The problem the patch was also trying to address was REMOVE returning
ERR_ACCESS because the file is still opened, is supposed to be resolved
by server returning ERR_FILE_OPEN and not ERR_ACCESS.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.9-rc1
This contains a slew of fixes in preparation for validating device trees
against json-schema bindings. In addition, this enables the CPU complex
(for CPU frequency scaling) and GPU on Tegra194.
* tag 'tegra-for-5.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (56 commits)
arm64: tegra: Add the GPU on Tegra194
arm64: tegra: Add compatible string for Tegra194 CPU complex
arm64: tegra: Add HDMI supplies on Norrin
arm64: tegra: Add #{address,size}-cells for VI I2C on Tegra210
arm64: tegra: Add missing clocks and power-domains to Tegra210 VI I2C
arm64: tegra: Add clocks and resets for ISP on Tegra210
arm64: tegra: Fix compatible string for DPAUX on Tegra210
arm64: tegra: Add i2c-bus subnode for DPAUX controllers
arm64: tegra: Sort aliases alphabetically
arm64: tegra: Remove spurious tabs
arm64: tegra: Populate VBUS for USB3 on Jetson TX2
arm64: tegra: Enable DFLL support on Jetson Nano
arm64: tegra: Add support for Jetson Xavier NX
arm64: tegra: Re-order PCIe aperture mappings
arm64: tegra: Enable Tegra VI CSI support for Jetson Nano
arm64: tegra: jetson-tx1: Add camera supplies
arm64: tegra: Fix order of XUSB controller clocks
arm64: tegra: Rename cbb@0 to bus@0 on Tegra194
arm64: tegra: Sort nodes by unit-address on Jetson Nano
arm64: tegra: Various fixes for PMICs
...
Link: https://lore.kernel.org/r/20200717161300.1661002-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.9-rc1
This adds device trees for the ASUS Google Nexus 7 and Acer Iconia Tab
A500. In addition there are a slew of fixes to existing device trees in
preparation for validating the DTBs against json-schema.
* tag 'tegra-for-5.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (38 commits)
ARM: tegra: Add device-tree for ASUS Google Nexus 7
ARM: tegra: Add device-tree for Acer Iconia Tab A500
ARM: tegra: Add HDMI supplies on Nyan boards
ARM: tegra: Add missing DSI controller on Tegra30
ARM: tegra: Add i2c-bus subnode for DPAUX controllers
ARM: tegra: The Tegra30 SDHCI is not backwards-compatible
ARM: tegra: The Tegra30 DC is not backwards-compatible
ARM: tegra: Remove spurious comma from node name
ARM: tegra: Add parent clock to DSI output
ARM: tegra: Use standard names for SRAM nodes
ARM: tegra: seaboard: Use standard battery bindings
ARM: tegra: Use standard names for LED nodes
ARM: tegra: Use numeric unit-addresses
ARM: tegra: medcom-wide: Remove extra panel power supply
ARM: tegra: Use proper unit-addresses for OPPs
ARM: tegra: Add missing clock-names for SDHCI controllers
ARM: tegra: Fix order of XUSB controller clocks
ARM: tegra: Add #reset-cells to Tegra124 memory controller
ARM: tegra: Add missing panel power supplies
ARM: tegra: Add micro-USB A/B port on Jetson TK1
...
Link: https://lore.kernel.org/r/20200717161300.1661002-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.9-rc1
This adds compatible strings for some new devices as well as updates and
fixes existing bindings.
* tag 'tegra-for-5.9-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: fuse: tegra: Add missing compatible strings
dt-bindings: i2c: tegra: Document Tegra210 VI I2C clocks and power-domains
dt-bindings: Add documentation for GV11B GPU
dt-bindings: ARM: tegra: Add ASUS Google Nexus 7
dt-bindings: ARM: tegra: Add Acer Iconia Tab A500
dt-bindings: Add vendor prefix for Acer Inc.
dt-bindings: tegra: Document Jetson Xavier NX (and devkit)
Link: https://lore.kernel.org/r/20200717161300.1661002-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: amlogic updates for v5.9
- meson-gx: Switch to the meson-ee-pwrc bindings
- add Khadas MCU nodes
* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: amlogic: Add the Ethernet "timing-adjustment" clock
arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindings
arm64: dts: meson-khadas-vim3: add Khadas MCU nodes
Link: https://lore.kernel.org/r/7h8sfif2na.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: amlogic updates for v5.9
- power-domain and MMC updates
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: odroidc1: enable the SDHC controller
ARM: dts: meson8b: ec100: enable the SDHC controller
ARM: dts: meson: add the SDHC MMC controller
ARM: dts: meson8b: add power domain controller
ARM: dts: meson8m2: add resets for the power domain controller
ARM: dts: meson8: add power domain controller
Link: https://lore.kernel.org/r/7hd04uf2o8.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
master
Pull io_uring fix from Jens Axboe:
"Fix for a case where, with automatic buffer selection, we can leak the
buffer descriptor for recvmsg"
* tag 'io_uring-5.8-2020-07-17' of git://git.kernel.dk/linux-block:
io_uring: fix recvmsg memory leak with buffer selection
|
|
Pull block fix from Jens Axboe:
"Single NVMe multipath capacity fix"
* tag 'block-5.8-2020-07-17' of git://git.kernel.dk/linux-block:
nvme: explicitly update mpath disk capacity on revalidation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse into master
Pull fuse fixes from Miklos Szeredi:
- two regressions in this cycle caused by the conversion of writepage
list to an rb_tree
- two regressions in v5.4 cause by the conversion to the new mount API
- saner behavior of fsconfig(2) for the reconfigure case
- an ancient issue with FS_IOC_{GET,SET}FLAGS ioctls
* tag 'fuse-fixes-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS
fuse: don't ignore errors from fuse_writepages_fill()
fuse: clean up condition for writepage sending
fuse: reject options on reconfigure via fsconfig(2)
fuse: ignore 'data' argument of mount(..., MS_REMOUNT)
fuse: use ->reconfigure() instead of ->remount_fs()
fuse: fix warning in tree_insert() and clean up writepage insertion
fuse: move rb_erase() before tree_insert()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into master
Pull overlayfs fixes from Miklos Szeredi:
- fix a regression introduced in v4.20 in handling a regenerated
squashfs lower layer
- two regression fixes for this cycle, one of which is Oops inducing
- miscellaneous issues
* tag 'ovl-fixes-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix lookup of indexed hardlinks with metacopy
ovl: fix unneeded call to ovl_change_flags()
ovl: fix mount option checks for nfs_export with no upperdir
ovl: force read-only sb on failure to create index dir
ovl: fix regression with re-formatted lower squashfs
ovl: fix oops in ovl_indexdir_cleanup() with nfs_export=on
ovl: relax WARN_ON() when decoding lower directory file handle
ovl: remove not used argument in ovl_check_origin
ovl: change ovl_copy_up_flags static
ovl: inode reference leak in ovl_is_inuse true case.
|
|
Add below to “Ancillary clock features” section
- Low Pass Filter (LPF) access from user space
Add below to list of “Supported hardware” section
+ Renesas (IDT) ClockMatrix™
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into master
Pull spi fixes from Mark Brown:
"A couple of small driver specific fixes for fairly minor issues"
* tag 'spi-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate
spi: mediatek: use correct SPI_CFG2_REG MACRO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into master
Pull regulator fixes from Mark Brown:
"The more substantial fix here is the rename of the da903x driver which
fixes a collision with the parent MFD driver name which caused issues
when things were built as modules.
There's also a fix for a mislableled regulator on the pmi8994 which is
quite important for systems with that device"
* tag 'regulator-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
MAINTAINERS: remove obsolete entry after file renaming
regulator: rename da903x to da903x-regulator
regulator: qcom_smd: Fix pmi8994 label
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into master
Pull regmap fixes from Mark Brown:
"A couple of substantial fixes here, one from Doug which fixes the
debugfs code for MMIO regmaps (fortunately not the common case) and
one from Marc fixing lookups of multiple regmaps for the same device
(a very unusual case).
There's also a fix for Kconfig to ensure we enable SoundWire properly"
* tag 'regmap-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: debugfs: Don't sleep while atomic for fast_io regmaps
regmap: add missing dependency on SoundWire
regmap: dev_get_regmap_match(): fix string comparison
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid into master
Pull HID fixes from Jiri Kosina:
- linked list race condition fix in hid-steam driver from Rodrigo Rivas
Costa
- assorted deviceID-specific quirks and other small cosmetic cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: avoid repeated "multiplier = " log messages
HID: logitech: Use HIDPP_RECEIVER_INDEX instead of 0xff
HID: quirks: Ignore Simply Automated UPB PIM
HID: apple: Disable Fn-key key-re-mapping on clone keyboards
MAINTAINERS: update uhid and hid-wiimote entry
HID: steam: fixes race in handling device list.
HID: magicmouse: do not set up autorepeat
HID: alps: support devices with report id 2
HID: quirks: Always poll Obins Anne Pro 2 keyboard
HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override
|
|
While digging through the recent mmiowb preemption issue it came up that
we aren't actually preventing IO from crossing a scheduling boundary.
While it's a bit ugly to overload smp_mb__after_spinlock() with this
behavior, it's what PowerPC is doing so there's some precedent.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.8
An awful lot of mostly small fixes here, mainly for x86 based platforms
and the CODEC drivers mainly used on them. For the most part this is
either minor device specific stuff which seems to come from detailed
testing or robustness against errors which comes from people having done
some fuzzing runs aginst the topology code.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
arm/arm64: dts: socfpga: fixes for v5.8
- Add status = "okay" in QSPI
- Increase QSPI size in reg property
- Fix dtschema for SoCFPGA platforms
* tag 'socfpga_fixes_for_v5.8_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema
ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema
arm64: dts: stratix10: increase QSPI reg address in nand dts file
arm64: dts: stratix10: add status to qspi dts node
arm64: dts: agilex: add status to qspi dts node
Link: https://lore.kernel.org/r/20200717155758.18233-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v5.8
- Replace CONFIG_PCIE_RCAR by CONFIG_PCIE_RCAR_HOST in the defconfig,
to unblock a planned Kconfig change.
* tag 'renesas-fixes-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST
Link: https://lore.kernel.org/r/20200717100523.15418-1-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into master
Pull sound fixes from Takashi Iwai:
"No surprise here, just a few device-specific small fixes: two fixes
for USB LINE6 and one for USB-audio drivers wrt syzkaller fuzzer
issues, while the rest are all HD-audio Realtek quirks"
* tag 'sound-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - fixup for yet another Intel reference board
ALSA: hda/realtek - Enable Speaker for ASUS UX563
ALSA: hda/realtek - Enable Speaker for ASUS UX533 and UX534
ALSA: hda/realtek: Enable headset mic of Acer TravelMate B311R-31 with ALC256
ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G14(G401) series with ALC289
ALSA: hda/realtek - change to suitable link model for ASUS platform
ALSA: usb-audio: Fix race against the error recovery URB submission
ALSA: line6: Sync the pending work cancel at disconnection
ALSA: line6: Perform sanity check for each URB creation
|
|
With UV1 support removed, EFI_UV1_MEMMAP is no longer used.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212956.019149227@hpe.com
|
|
With UV1 removed, EFI_UV1_MEMMAP is not longer used. Remove the code used
by it and the related code in EFI.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212955.902592618@hpe.com
|
|
In removing UV1 support, efi_have_uv1_memmap is no longer used.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212955.786177105@hpe.com
|
|
As a part of UV1 platform removal, don't try to recognize the platform
through DMI to set the EFI_UV1_MEMMAP bit.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212955.667726896@hpe.com
|
|
As a part of UV1 platform removal, delete the efi=old_map option,
which is not longer needed.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212955.552098718@hpe.com
|
|
Remove UV1 reference as UV1 is not longer supported by HPE.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212955.435951508@hpe.com
|
|
UV1 is not longer supported by HPE
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212955.320087418@hpe.com
|
|
UV1 is not longer supported by HPE.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212955.203480177@hpe.com
|
|
UV1 is not longer supported.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212955.083309377@hpe.com
|
|
UV1 is not longer supported.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212954.964332370@hpe.com
|
|
UV1 is not longer supported.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212954.846026992@hpe.com
|
|
UV1 is not longer supported.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212954.728022415@hpe.com
|
|
UV1 is not longer supported
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200713212954.610885520@hpe.com
|
|
The vfio_pci_release call will free and clear the error and request
eventfd ctx while these ctx could be in use at the same time in the
function like vfio_pci_request, and it's expected to protect them under
the vdev->igate mutex, which is missing in vfio_pci_release.
This issue is introduced since commit 1518ac272e78 ("vfio/pci: fix memory
leaks of eventfd ctx"),and since commit 5c5866c593bb ("vfio/pci: Clear
error and request eventfd ctx after releasing"), it's very easily to
trigger the kernel panic like this:
[ 9513.904346] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 9513.913091] Mem abort info:
[ 9513.915871] ESR = 0x96000006
[ 9513.918912] EC = 0x25: DABT (current EL), IL = 32 bits
[ 9513.924198] SET = 0, FnV = 0
[ 9513.927238] EA = 0, S1PTW = 0
[ 9513.930364] Data abort info:
[ 9513.933231] ISV = 0, ISS = 0x00000006
[ 9513.937048] CM = 0, WnR = 0
[ 9513.940003] user pgtable: 4k pages, 48-bit VAs, pgdp=0000007ec7d12000
[ 9513.946414] [0000000000000008] pgd=0000007ec7d13003, p4d=0000007ec7d13003, pud=0000007ec728c003, pmd=0000000000000000
[ 9513.956975] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 9513.962521] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio hclge hns3 hnae3 [last unloaded: vfio_pci]
[ 9513.972998] CPU: 4 PID: 1327 Comm: bash Tainted: G W 5.8.0-rc4+ #3
[ 9513.980443] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B270.01 05/08/2020
[ 9513.989274] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[ 9513.994827] pc : _raw_spin_lock_irqsave+0x48/0x88
[ 9513.999515] lr : eventfd_signal+0x6c/0x1b0
[ 9514.003591] sp : ffff800038a0b960
[ 9514.006889] x29: ffff800038a0b960 x28: ffff007ef7f4da10
[ 9514.012175] x27: ffff207eefbbfc80 x26: ffffbb7903457000
[ 9514.017462] x25: ffffbb7912191000 x24: ffff007ef7f4d400
[ 9514.022747] x23: ffff20be6e0e4c00 x22: 0000000000000008
[ 9514.028033] x21: 0000000000000000 x20: 0000000000000000
[ 9514.033321] x19: 0000000000000008 x18: 0000000000000000
[ 9514.038606] x17: 0000000000000000 x16: ffffbb7910029328
[ 9514.043893] x15: 0000000000000000 x14: 0000000000000001
[ 9514.049179] x13: 0000000000000000 x12: 0000000000000002
[ 9514.054466] x11: 0000000000000000 x10: 0000000000000a00
[ 9514.059752] x9 : ffff800038a0b840 x8 : ffff007ef7f4de60
[ 9514.065038] x7 : ffff007fffc96690 x6 : fffffe01faffb748
[ 9514.070324] x5 : 0000000000000000 x4 : 0000000000000000
[ 9514.075609] x3 : 0000000000000000 x2 : 0000000000000001
[ 9514.080895] x1 : ffff007ef7f4d400 x0 : 0000000000000000
[ 9514.086181] Call trace:
[ 9514.088618] _raw_spin_lock_irqsave+0x48/0x88
[ 9514.092954] eventfd_signal+0x6c/0x1b0
[ 9514.096691] vfio_pci_request+0x84/0xd0 [vfio_pci]
[ 9514.101464] vfio_del_group_dev+0x150/0x290 [vfio]
[ 9514.106234] vfio_pci_remove+0x30/0x128 [vfio_pci]
[ 9514.111007] pci_device_remove+0x48/0x108
[ 9514.115001] device_release_driver_internal+0x100/0x1b8
[ 9514.120200] device_release_driver+0x28/0x38
[ 9514.124452] pci_stop_bus_device+0x68/0xa8
[ 9514.128528] pci_stop_and_remove_bus_device+0x20/0x38
[ 9514.133557] pci_iov_remove_virtfn+0xb4/0x128
[ 9514.137893] sriov_disable+0x3c/0x108
[ 9514.141538] pci_disable_sriov+0x28/0x38
[ 9514.145445] hns3_pci_sriov_configure+0x48/0xb8 [hns3]
[ 9514.150558] sriov_numvfs_store+0x110/0x198
[ 9514.154724] dev_attr_store+0x44/0x60
[ 9514.158373] sysfs_kf_write+0x5c/0x78
[ 9514.162018] kernfs_fop_write+0x104/0x210
[ 9514.166010] __vfs_write+0x48/0x90
[ 9514.169395] vfs_write+0xbc/0x1c0
[ 9514.172694] ksys_write+0x74/0x100
[ 9514.176079] __arm64_sys_write+0x24/0x30
[ 9514.179987] el0_svc_common.constprop.4+0x110/0x200
[ 9514.184842] do_el0_svc+0x34/0x98
[ 9514.188144] el0_svc+0x14/0x40
[ 9514.191185] el0_sync_handler+0xb0/0x2d0
[ 9514.195088] el0_sync+0x140/0x180
[ 9514.198389] Code: b9001020 d2800000 52800022 f9800271 (885ffe61)
[ 9514.204455] ---[ end trace 648de00c8406465f ]---
[ 9514.212308] note: bash[1327] exited with preempt_count 1
Cc: Qian Cai <cai@lca.pw>
Cc: Alex Williamson <alex.williamson@redhat.com>
Fixes: 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx")
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
