| Age | Commit message (Collapse) | Author |
|---|
|
syzbot is reporting general protection fault in bitfill_aligned() [1]
caused by integer underflow in bit_clear_margins(). The cause of this
problem is when and how do_vc_resize() updates vc->vc_{cols,rows}.
If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres
is going to shrink, vc->vc_{cols,rows} will not be updated. This allows
bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or
info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will
try to overrun the __iomem region and causes general protection fault.
Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to
new_cols = (cols ? cols : vc->vc_cols);
new_rows = (lines ? lines : vc->vc_rows);
exception. Since cols and lines are calculated as
cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
cols /= vc->vc_font.width;
rows /= vc->vc_font.height;
vc_resize(vc, cols, rows);
in fbcon_modechanged(), var.xres < vc->vc_font.width makes cols = 0
and var.yres < vc->vc_font.height makes rows = 0. This means that
const int fd = open("/dev/fb0", O_ACCMODE);
struct fb_var_screeninfo var = { };
ioctl(fd, FBIOGET_VSCREENINFO, &var);
var.xres = var.yres = 1;
ioctl(fd, FBIOPUT_VSCREENINFO, &var);
easily reproduces integer underflow bug explained above.
Of course, callers of vc_resize() are not handling vc_do_resize() failure
is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore,
as a band-aid workaround, this patch checks integer underflow in
"struct fbcon_ops"->clear_margins call, assuming that
vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not
cause integer overflow.
[1] https://syzkaller.appspot.com/bug?id=a565882df74fa76f10d3a6fec4be31098dbb37c6
Reported-and-tested-by: syzbot <syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200715015102.3814-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Biggest part is the addition of the rk3288 variant of the VMARC
SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes
with it as the underlying Dalang carrier board is shared by both
an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10).
Other than that rk3288 gets its ohci node added that only works
on the fixed rk3288w variant of the soc and some asorted fixes
and improvements for dt-binding-check.
* tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add PCIe for RockPI N10
ARM: dts: rockchip: Add HDMI out for RockPI N8/N10
ARM: dts: rockchip: Add USB for RockPI N8/N10
ARM: dts: rockchip: Add usb host0 ohci node for rk3288
ARM: dts: rockchip: Fix VBUS on rk3288-vyasa
ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support
ARM: dts: rockchip: Add VMARC RK3288 SOM initial support
dt-bindings: arm: rockchip: Add Rock Pi N8 binding
arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier
arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier
arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties
ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM
ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac
ARM: dts: rockchip: Add marvell BT irq config
ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio
Link: https://lore.kernel.org/r/2472314.kD9Egx1jfM@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Fuel gauge for Pinebook Pro, the newly added periph-burst flag for pl330s,
first tiny part of the rk3399 camera infrastructure and cleanups + making
dt-binding-check even happier.
* tag 'v5.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac
arm64: dts: rockchip: remove bus-width from mmc nodes in px30 dts files
arm64: dts: rockchip: add rx0 mipi-phy for rk3399
arm64: dts: rockchip: rename and label gpio-led subnodes part 2
arm64: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio
arm64: dts: rockchip: fix rk3399-puma gmac reset gpio
arm64: dts: rockchip: fix rk3399-puma vcc5v0-host gpio
arm64: dts: rockchip: fix rk3368-lion gmac reset gpio
arm64: dts: rockchip: set rockpro64 usbc dr_mode as host
arm64: dts: rockchip: add fuel gauge to Pinebook Pro dts
Link: https://lore.kernel.org/r/2221560.KYr1Tee2JR@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Factor the 12 copies of the SW PAN entry and exit code into callable
subroutines, and use alternatives patching to either emit a 'bl'
instruction to call them, or a NOP if h/w PAN is found to be available
at runtime.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200721083315.4816-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB
context save/restore") is using the IPFS 'num_offsets' value when
allocating memory for FPCI context instead of the FPCI 'num_offsets'.
After commit cad064f1bd52 ("devres: handle zero size in devm_kmalloc()")
was added system suspend started failing on Tegra186. The kernel log
showed that the Tegra XHCI driver was crashing on entry to suspend when
attempting the save the USB context. On Tegra186, the IPFS context has a
zero length but the FPCI content has a non-zero length, and because of
the bug in the Tegra XHCI driver we are incorrectly allocating a zero
length array for the FPCI context. The crash seen on entering suspend
when we attempt to save the FPCI context and following commit
cad064f1bd52 ("devres: handle zero size in devm_kmalloc()") this now
causes a NULL pointer deference when we access the memory. Fix this by
correcting the amount of memory we are allocating for FPCI contexts.
Cc: stable@vger.kernel.org
Fixes: 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB context save/restore")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200715113842.30680-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clang fails to compile __get_user_size() on 32-bit for the following code:
long long val;
__get_user(val, usrptr);
with: error: invalid output size for constraint '=q'
GCC compiles the same code without complaints.
The reason is that GCC and Clang are architecturally different, which leads
to subtle issues for code that's invalid but clearly dead, i.e. with code
that emulates polymorphism with the preprocessor and sizeof.
GCC will perform semantic analysis after early inlining and dead code
elimination, so it will not warn on invalid code that's dead. Clang
strictly performs optimizations after semantic analysis, so it will warn
for dead code.
Neither Clang nor GCC like this very much with -m32:
long long ret;
asm ("movb $5, %0" : "=q" (ret));
However, GCC can tolerate this variant:
long long ret;
switch (sizeof(ret)) {
case 1:
asm ("movb $5, %0" : "=q" (ret));
break;
case 8:;
}
Clang, on the other hand, won't accept that because it validates the inline
asm for the '1' case before the optimisation phase where it realises that
it wouldn't have to emit it anyway.
If LLVM (Clang's "back end") fails such as during instruction selection or
register allocation, it cannot provide accurate diagnostics (warnings /
errors) that contain line information, as the AST has been discarded from
memory at that point.
While there have been early discussions about having C/C++ specific
language optimizations in Clang via the use of MLIR, which would enable
such earlier optimizations, such work is not scoped and likely a multi-year
endeavor.
It was discussed to change the asm output constraint for the one byte case
from "=q" to "=r". While it works for 64-bit, it fails on 32-bit. With '=r'
the compiler could fail to chose a register accessible as high/low which is
required for the byte operation. If that happens the assembly will fail.
Use a local temporary variable of type 'unsigned char' as output for the
byte copy inline asm and then assign it to the real output variable. This
prevents Clang from failing the semantic analysis in the above case.
The resulting code for the actual one byte copy is not affected as the
temporary variable is optimized out.
[ tglx: Amended changelog ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://bugs.llvm.org/show_bug.cgi?id=33587
Link: https://github.com/ClangBuiltLinux/linux/issues/3
Link: https://github.com/ClangBuiltLinux/linux/issues/194
Link: https://github.com/ClangBuiltLinux/linux/issues/781
Link: https://lore.kernel.org/lkml/20180209161833.4605-1-dwmw2@infradead.org/
Link: https://lore.kernel.org/lkml/CAK8P3a1EBaWdbAEzirFDSgHVJMtWjuNt2HGG8z+vpXeNHwETFQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20200720204925.3654302-12-ndesaulniers@google.com
|
|
Newer versions of clang only look for $(COMPAT_GCC_TOOLCHAIN_DIR)as [1],
rather than $(COMPAT_GCC_TOOLCHAIN_DIR)$(CROSS_COMPILE_COMPAT)as,
resulting in the following build error:
$ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_COMPAT=arm-linux-gnueabi- LLVM=1 O=out/aarch64 distclean \
defconfig arch/arm64/kernel/vdso32/
...
/home/nathan/cbl/toolchains/llvm-binutils/bin/as: unrecognized option '-EL'
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
make[3]: *** [arch/arm64/kernel/vdso32/Makefile:181: arch/arm64/kernel/vdso32/note.o] Error 1
...
Adding the value of CROSS_COMPILE_COMPAT (adding notdir to account for a
full path for CROSS_COMPILE_COMPAT) fixes this issue, which matches the
solution done for the main Makefile [2].
[1]: https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90
[2]: https://lore.kernel.org/lkml/20200721173125.1273884-1-maskray@google.com/
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Link: https://lore.kernel.org/r/20200723041509.400450-1-natechancellor@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Also remove now unused __percpu_mov_op.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-11-ndesaulniers@google.com
|
|
Use __pcpu_size_call_return() to simplify this_cpu_read_stable().
Also remove __bad_percpu_size() which is now unused.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-10-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-9-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-8-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-7-ndesaulniers@google.com
|
|
The "e" constraint represents a constant, but the XADD instruction doesn't
accept immediate operands.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-6-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-5-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-4-ndesaulniers@google.com
|
|
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-3-ndesaulniers@google.com
|
|
In preparation for cleaning up the percpu operations, define macros for
abstraction based on the width of the operation.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-2-ndesaulniers@google.com
|
|
The buswidth of the pcnoc_s_* nodes is actually not 8, but
4 bytes. Let's fix it.
Reported-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>
Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Link: https://lore.kernel.org/r/20200709130004.12462-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200723083735.5616-3-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When an interconnect path is being disabled, currently we don't aggregate
the requests for it afterwards. But the re-aggregation step shouldn't be
skipped, as it may leave the nodes with outdated bandwidth data. This
outdated data may actually keep the path still enabled and prevent the
device from going into lower power states.
Reported-by: Atul Dhudase <adhudase@codeaurora.org>
Fixes: 7d374b209083 ("interconnect: Add helpers for enabling/disabling a path")
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Atul Dhudase <adhudase@codeaurora.org>
Reviewed-by: Atul Dhudase <adhudase@codeaurora.org>
Link: https://lore.kernel.org/r/20200721120740.3436-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20200723083735.5616-2-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
WRITE_ONCE() isn't the correct way to publish a pointer to a data
structure, since it doesn't include a write memory barrier. Therefore
other tasks may see that the pointer has been set but not see that the
pointed-to memory has finished being initialized yet. Instead a
primitive with "release" semantics is needed.
Use smp_store_release() for this.
The use of READ_ONCE() on the read side is still potentially correct if
there's no control dependency, i.e. if all memory being "published" is
transitively reachable via the pointer itself. But this pairing is
somewhat confusing and error-prone. So just upgrade the read side to
smp_load_acquire() so that it clearly pairs with smp_store_release().
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20200716060553.24618-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
syzbot is reporting that mmput() from shrinker function has a risk of
deadlock [1], for delayed_uprobe_add() from update_ref_ctr() calls
kzalloc(GFP_KERNEL) with delayed_uprobe_lock held, and
uprobe_clear_state() from __mmput() also holds delayed_uprobe_lock.
Commit a1b2289cef92ef0e ("android: binder: drop lru lock in isolate
callback") replaced mmput() with mmput_async() in order to avoid sleeping
with spinlock held. But this patch replaces mmput() with mmput_async() in
order not to start __mmput() from shrinker context.
[1] https://syzkaller.appspot.com/bug?id=bc9e7303f537c41b2b0cc2dfcea3fc42964c2d45
Reported-by: syzbot <syzbot+1068f09c44d151250c33@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+e5344baa319c9a96edec@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Acked-by: Todd Kjos <tkjos@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4ba9adb2-43f5-2de0-22de-f6075c1fab50@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolves conflict with the tip tree.
Fixes: d7866e503bdc ("crypto: x86 - Remove include/asm/inst.h")
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Stephen Rothwell <sfr@canb.auug.org.au>,
CC: "Chang S. Bae" <chang.seok.bae@intel.com>,
CC: Peter Zijlstra <peterz@infradead.org>,
CC: Sasha Levin <sashal@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Delete the doubled word "from" in multiple places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Drop the doubled word "request" in a kernel-doc comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Drop the doubled word "in" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes all the sparse and W=1 compiler warnings in the
driver.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
i.MX6 SL, SLL, ULL, ULZ SoCs have an RNGB block.
Since imx-rngc driver supports also rngb,
let's enable it for these SoCs too.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RNGB block is found in some i.MX6 SoCs - 6SL, 6SLL, 6ULL, 6ULZ.
Add corresponding compatible strings.
Note:
Several NXP SoC from QorIQ family (P1010, P1023, P4080, P3041, P5020)
also have a RNGB, however it's part of the CAAM
(Cryptograhic Accelerator and Assurance Module) crypto accelerator.
In this case, RNGB is managed in the caam driver
(drivers/crypto/caam/), since it's tightly related to
the caam "job ring" interface, not to mention CAAM internally relying on
RNGB as source of randomness.
On the other hand, the i.MX6 SoCs with RNGB have a DCP
(Data Co-Processor) crypto accelerator and this block and RNGB
are independent.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Only its reorder field is actually used now, so remove the struct and
embed @reorder directly in parallel_data.
No functional change, just a cleanup.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There's no reason to have two interfaces when there's only one caller.
Removing _possible saves text and simplifies future changes.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A padata instance has effective cpumasks that store the user-supplied
masks ANDed with the online mask, but this middleman is unnecessary.
parallel_data keeps the same information around. Removing this saves
text and code churn in future changes.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pd_setup_cpumasks() has only one caller. Move its contents inline to
prepare for the next cleanup.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
padata_stop() has two callers and is unnecessary in both cases. When
pcrypt calls it before padata_free(), it's being unloaded so there are
no outstanding padata jobs[0]. When __padata_free() calls it, it's
either along the same path or else pcrypt initialization failed, which
of course means there are also no outstanding jobs.
Removing it simplifies padata and saves text.
[0] https://lore.kernel.org/linux-crypto/20191119225017.mjrak2fwa5vccazl@gondor.apana.org.au/
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
padata_start() is only used right after pcrypt allocates an instance
with all possible CPUs, when PADATA_INVALID can't happen, so there's no
need for a separate "start" step. It can be done during allocation to
save text, make using padata easier, and avoid unneeded calls in the
future.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
clang static analysis flags this error
qat_uclo.c:297:3: warning: Attempt to free released memory
[unix.Malloc]
kfree(*init_tab_base);
^~~~~~~~~~~~~~~~~~~~~
When input *init_tab_base is null, the function allocates memory for
the head of the list. When there is problem allocating other list
elements the list is unwound and freed. Then a check is made if the
list head was allocated and is also freed.
Keeping track of the what may need to be freed is the variable 'tail_old'.
The unwinding/freeing block is
while (tail_old) {
mem_init = tail_old->next;
kfree(tail_old);
tail_old = mem_init;
}
The problem is that the first element of tail_old is also what was
allocated for the list head
init_header = kzalloc(sizeof(*init_header), GFP_KERNEL);
...
*init_tab_base = init_header;
flag = 1;
}
tail_old = init_header;
So *init_tab_base/init_header are freed twice.
There is another problem.
When the input *init_tab_base is non null the tail_old is calculated by
traveling down the list to first non null entry.
tail_old = init_header;
while (tail_old->next)
tail_old = tail_old->next;
When the unwinding free happens, the last entry of the input list will
be freed.
So the freeing needs a general changed.
If locally allocated the first element of tail_old is freed, else it
is skipped. As a bit of cleanup, reset *init_tab_base if it came in
as null.
Fixes: b4b7e67c917f ("crypto: qat - Intel(R) QAT ucode part of fw loader")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The child devices for sa2ul (like the RNG) have hard dependency towards
the parent, they can't function without the parent enabled. Add device
link for this purpose so that the dependencies are taken care of properly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for sa2ul hardware AEAD for hmac(sha256),cbc(aes) and
hmac(sha1),cbc(aes) algorithms.
Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: number of bug fixes, major refactoring and cleanup of
code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for sha1/sha256/sha512 sa2ul based hardware authentication.
With the hash update mechanism, we always use software fallback
mechanism for now, as there is no way to fetch the partial hash state
from the HW accelerator. HW accelerator is only used when digest is
called for a data chunk of known size.
Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: various bug fixes, major cleanups and refactoring of code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Adds a basic crypto driver and currently supports AES/3DES
in cbc mode for both encryption and decryption.
Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: major re-work to fix various bugs in the driver and to
cleanup the code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Security Accelerator Ultra Lite (SA2UL) subsystem provides hardware
cryptographic acceleration for the following use cases:
* Encryption and authentication for secure boot
* Encryption and authentication of content in applications
requiring DRM (digital rights management) and
content/asset protection
SA2UL provides support for number of different cryptographic algorithms
including SHA1, SHA256, SHA512, AES, 3DES, and various combinations of
the previous for AEAD use.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
[t-kristo@ti.com: converted documentation to yaml]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The clang integrated assembler complains about movzxw:
arch/x86/crypto/crc32c-pcl-intel-asm_64.S:173:2: error: invalid instruction mnemonic 'movzxw'
It seems that movzwq is the mnemonic that it expects instead,
and this is what objdump prints when disassembling the file.
Fixes: 6a8ce1ef3940 ("crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.8-2020-07-22:
amdgpu:
- Fix crash when overclocking VegaM
- Fix possible crash when editing dpm levels
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200723032608.3865-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* sun4i: Fix inverted HPD result; fixes an earlier fix
* lima: fix timeout during reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200722070321.GA29190@linux-uq9g
|
|
In the implementation of uld_send(), the skb is consumed on all
execution paths except one. Release skb when returning NET_XMIT_DROP.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if
$(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit,
GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to
/usr/bin/ and Clang as of 11 will search for both
$(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.
GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle,
$(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice,
$(prefix)aarch64-linux-gnu/$needle rarely contains executables.
To better model how GCC's -B/--prefix takes in effect in practice, newer
Clang (since
https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90)
only searches for $(prefix)$needle. Currently it will find /usr/bin/as
instead of /usr/bin/aarch64-linux-gnu-as.
Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
(/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the
appropriate cross compiling GNU as (when -no-integrated-as is in
effect).
Cc: stable@vger.kernel.org
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This patch fixes PTP on AQC10X.
PTP support on AQC10X requires FW involvement and FW configures the
TPS data arb mode itself.
So we must make sure driver doesn't touch TPS data arb mode on AQC10x
if PTP is enabled. Otherwise, there are no timestamps even though
packets are flowing.
Fixes: 2deac71ac492a ("net: atlantic: QoS implementation: min_rate")
Signed-off-by: Egor Pomozov <epomozov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Checks on `addr_len` and `usax->sax25_ndigis` are insufficient.
ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7
or 8. Fix it.
It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Xin Long says:
====================
sctp: shrink stream outq in the right place
Patch 1 is an improvement, and Patch 2 is a bug fix.
====================
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding a stream with stream reconf, the new stream firstly is in
CLOSED state but new out chunks can still be enqueued. Then once gets
the confirmation from the peer, the state will change to OPEN.
However, if the peer denies, it needs to roll back the stream. But when
doing that, it only sets the stream outcnt back, and the chunks already
in the new stream don't get purged. It caused these chunks can still be
dequeued in sctp_outq_dequeue_data().
As its stream is still in CLOSE, the chunk will be enqueued to the head
again by sctp_outq_head_data(). This chunk will never be sent out, and
the chunks after it can never be dequeued. The assoc will be 'hung' in
a dead loop of sending this chunk.
To fix it, this patch is to purge these chunks already in the new
stream by calling sctp_stream_shrink_out() when failing to do the
addstream reconf.
Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
