summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. In sum, patches to address fallout from the previous round plus updates from the IPVS folks via Simon Horman, they are: 1) Add a new scheduler to IPVS: The weighted overflow scheduling algorithm directs network connections to the server with the highest weight that is currently available and overflows to the next when active connections exceed the node's weight. From Raducu Deaconu. 2) Fix locking ordering in IPVS, always take rtnl_lock in first place. Patch from Julian Anastasov. 3) Allow to indicate the MTU to the IPVS in-kernel state sync daemon. From Julian Anastasov. 4) Enhance multicast configuration for the IPVS state sync daemon. Also from Julian. 5) Resolve sparse warnings in the nf_dup modules. 6) Fix a linking problem when CONFIG_NF_DUP_IPV6 is not set. 7) Add ICMP codes 5 and 6 to IPv6 REJECT target, they are more informative subsets of code 1. From Andreas Herz. 8) Revert the jumpstack size calculation from mark_source_chains due to chain depth miscalculations, from Florian Westphal. 9) Calm down more sparse warning around the Netfilter tree, again from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge branch 'bpf_trace_printk-percent-s'David S. Miller
Alexei Starovoitov says: ==================== support for '%s' in bpf_trace_printk v2->v3: fix the comment to mention that strncpy_from_unsafe() returns the length of the string including the trailing NUL. v1->v2: patch 1: generalize FETCH_FUNC_NAME(memory, string) into strncpy_from_unsafe() patch 2: use it in bpf_trace_printk ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28bpf: add support for %s specifier to bpf_trace_printk()Alexei Starovoitov
%s specifier makes bpf program and kernel debugging easier. To make sure that trace_printk won't crash the unsafe string is copied into stack and unsafe pointer is substituted. The following C program: #include <linux/fs.h> int foo(struct pt_regs *ctx, struct filename *filename) { void *name = 0; bpf_probe_read(&name, sizeof(name), &filename->name); bpf_trace_printk("executed %s\n", name); return 0; } when attached to kprobe do_execve() will produce output in /sys/kernel/debug/tracing/trace_pipe : make-13492 [002] d..1 3250.997277: : executed /bin/sh sh-13493 [004] d..1 3250.998716: : executed /usr/bin/gcc gcc-13494 [002] d..1 3250.999822: : executed /usr/lib/gcc/x86_64-linux-gnu/4.7/cc1 gcc-13495 [002] d..1 3251.006731: : executed /usr/bin/as gcc-13496 [002] d..1 3251.011831: : executed /usr/lib/gcc/x86_64-linux-gnu/4.7/collect2 collect2-13497 [000] d..1 3251.012941: : executed /usr/bin/ld Suggested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28lib: introduce strncpy_from_unsafe()Alexei Starovoitov
generalize FETCH_FUNC_NAME(memory, string) into strncpy_from_unsafe() and fix sparse warnings that were present in original implementation. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28netpoll: warn on netpoll_send_udp users who haven't disabled irqsNikolay Aleksandrov
Make sure we catch future netpoll_send_udp users who use it without disabling irqs and also as a hint for poll_controller users. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge branch 'phylib-simplifications'David S. Miller
Sergei Shtylyov says: ==================== Some phylib simplifications Here's 2 patches against DaveM's 'net-next.git' repo. We simplify a bogus string of type casts in the 1st patch and make the code respect some coding standards of the networking code in the 2nd one. I may follow with fixing of checkpatch.pl's complaints. if I have time.. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28phylib: simplify NULL checksSergei Shtylyov
Fix scripts/checkpatch.pl's messages like: CHECK: Comparison to NULL could be written "!phydrv->read_mmd_indirect" BTW, it doesn't detect the reversed comparisons (which I've fixed as well). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28phylib: simplify bogus phy_device_create() resultSergei Shtylyov
Get rid of the bogus string of type casts where ERR_PTR() is enough. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: sched: don't break line in tc_classify loop notificationDaniel Borkmann
Just some minor noise follow-up to address some stylistic issues of commit 3b3ae880266d ("net: sched: consolidate tc_classify{,_compat}"). Accidentally v1 instead of v2 of that commit got applied, so this patch adds the relative diff. Suggested-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28sfc: Allow driver to cope with a lower number of VIs than it needs for RSSShradha Shah
Previously, the driver would refuse to load if it couldn't secure enough VIs from the MC to fulfill its RSS requirements. This was causing probe to fail on later functions in configurations where we'd run out of VIs, such as having many VFs. This change allows the driver to load with fewer VIs, down to a minimum of 2. A warning will be printed saying that RSS requirements were not met, possibly affecting performance. efx->max_tx_channels needs to be set to avoid going down the failure path in efx_probe_nic() immediately in the loop after the probe() NIC-type function. Also, Set rc=ENOSPC when bombing out of efx_probe_nic due to lack of VIs. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge branches 'pci/enumeration' and 'pci/misc' into nextBjorn Helgaas
* pci/enumeration: PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci ARM/PCI: Set MPS before pci_bus_add_devices() * pci/misc: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
2015-08-28cxgb4: Force uninitialized state if FW in adapter is unsupportedHariprasad Shenai
Forcing uninitialized state allows us to upgrade and reinitialize the adapter. FW_VERSION_T4 = 1.4.0.0 FW_VERSION_T5 = 0.0.0.0 FW_VERSION_T6 = 0.0.0.0 At this point driver supports above and greater than above version. If FW in adapter < min FW_VERSION driver supports tries to upgrade the FW If FW in adapter >= FW_VERSION driver supports then it follows normal path Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== Included changes: - code beautification - remove obsolete 'deleted' attribute for bat-gw node - increase internal version number - prevent potential access to netdev object after deregistration - set needed_head/tail_room for batman virtual interface ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28openswitch: fix typo CONFIG_NF_CONNTRACK_LABELValentin Rothberg
Fix typo in conntrack.c s/CONFIG_NF_CONNTRACK_LABEL/CONFIG_NF_CONNTRACK_LABELS/ Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge branch 'vrf-inetpeer'David S. Miller
David Ahern says: ==================== net: Refactor inetpeer cache and add support for VRFs Per Dave's comment on the version 1 patch adding VRF support to inetpeer cache by explicitly making the address + index a key. Refactored the inetpeer code in the process; mostly impacts the use by tcp_metrics. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add support for VRFs to inetpeer cacheDavid Ahern
inetpeer caches based on address only, so duplicate IP addresses within a namespace return the same cached entry. Enhance the ipv4 address key to contain both the IPv4 address and VRF device index. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Refactor inetpeer address structDavid Ahern
Move the inetpeer_addr_base union to inetpeer_addr and drop inetpeer_addr_base. Both the a6 and in6_addr overlays are not needed; drop the __be32 version and rename in6 to a6 for consistency with ipv4. Add a new u32 array to the union which removes the need for the typecast in the compare function and the use of a consistent arg for both ipv4 and ipv6 addresses which makes the compare function more readable. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add helper function to compare inetpeer addressesDavid Ahern
tcp_metrics and inetpeer both have functions to compare inetpeer addresses. Consolidate into 1 version. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add set,get helpers for inetpeer addressesDavid Ahern
Use inetpeer set,get helpers in tcp_metrics rather than peeking into the inetpeer_addr struct. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Introduce ipv4_addr_hash and use it for tcp metricsDavid Ahern
Refactors a common line into helper function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add ethernet header for pass through VRF deviceDavid Ahern
The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net/xen-netfront: only napi_synchronize() if runningChas Williams
If an interface isn't running napi_synchronize() will hang forever. [ 392.248403] rmmod R running task 0 359 343 0x00000000 [ 392.257671] ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88 [ 392.267644] ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40 [ 392.277524] 0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40 [ 392.287323] Call Trace: [ 392.291599] [<ffffffff81796927>] schedule+0x37/0x90 [ 392.298553] [<ffffffff8179985b>] schedule_timeout+0x14b/0x280 [ 392.306421] [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80 [ 392.314006] [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0 [ 392.322125] [<ffffffff81109d07>] msleep+0x37/0x50 [ 392.329037] [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront] [ 392.339658] [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront] [ 392.348516] [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0 [ 392.356257] [<ffffffff814e7217>] __device_release_driver+0x87/0x120 [ 392.364645] [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0 [ 392.371989] [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0 [ 392.379883] [<ffffffff814e84f0>] driver_unregister+0x30/0x70 [ 392.387495] [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20 [ 392.395908] [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront] [ 392.404877] [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230 [ 392.412804] [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71 Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28IGMP: Inhibit reports for local multicast groupsPhilip Downey
The range of addresses between 224.0.0.0 and 224.0.0.255 inclusive, is reserved for the use of routing protocols and other low-level topology discovery or maintenance protocols, such as gateway discovery and group membership reporting. Multicast routers should not forward any multicast datagram with destination addresses in this range, regardless of its TTL. Currently, IGMP reports are generated for this reserved range of addresses even though a router will ignore this information since it has no purpose. However, the presence of reserved group addresses in an IGMP membership report uses up network bandwidth and can also obscure addresses of interest when inspecting membership reports using packet inspection or debug messages. Although the RFCs for the various version of IGMP (e.g.RFC 3376 for v3) do not specify that the reserved addresses be excluded from membership reports, it should do no harm in doing so. In particular there should be no adverse effect in any IGMP snooping functionality since 224.0.0.x is specifically excluded as per RFC 4541 (IGMP and MLD Snooping Switches Considerations) section 2.1.2. Data Forwarding Rules: 2) Packets with a destination IP (DIP) address in the 224.0.0.X range which are not IGMP must be forwarded on all ports. IGMP reports for local multicast groups can now be optionally inhibited by means of a system control variable (by setting the value to zero) e.g.: echo 0 > /proc/sys/net/ipv4/igmp_link_local_mcast_reports To retain backwards compatibility the previous behaviour is retained by default on system boot or reverted by setting the value back to non-zero e.g.: echo 1 > /proc/sys/net/ipv4/igmp_link_local_mcast_reports Signed-off-by: Philip Downey <pdowney@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28r8169: Add software counter for multicast packagesCorinna Vinschen
The multicast hardware counter on 8168/8111 chips is only 32 bit while the statistics in struct rtnl_link_stats64 are 64 bit. Given that statistics are requested on an irregular basis, an overflow of the hardware counter can go unnoticed. To count even very large numbers of multicast packets reliably, add a software counter and remove previously applied code to fill the multicast field requested by @rtl8169_get_stats64 with the values read from the rx_multicast hardware counter. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Bluetooth: hci_bcm: Fix crash on suspendFrederic Danis
If bcm_suspend is called whithout device opened there is a crash as it tries to use bdev->hu which is NULL. Rename bcm_device_list_lock to bcm_device_lock as it does not only apply to bcm_device_list. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28netfilter: reduce sparse warningsFlorian Westphal
bridge/netfilter/ebtables.c:290:26: warning: incorrect type in assignment (different modifiers) -> remove __pure annotation. ipv6/netfilter/ip6t_SYNPROXY.c:240:27: warning: cast from restricted __be16 -> switch ntohs to htons and vice versa. netfilter/core.c:391:30: warning: symbol 'nfq_ct_nat_hook' was not declared. Should it be static? -> delete it, got removed net/netfilter/nf_synproxy_core.c:221:48: warning: cast to restricted __be32 -> Use __be32 instead of u32. Tested with objdiff that these changes do not affect generated code. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-28Revert "netfilter: xtables: compute exact size needed for jumpstack"Florian Westphal
This reverts commit 98d1bd802cdbc8f56868fae51edec13e86b59515. mark_source_chains will not re-visit chains, so *filter :INPUT ACCEPT [365:25776] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [217:45832] :t1 - [0:0] :t2 - [0:0] :t3 - [0:0] :t4 - [0:0] -A t1 -i lo -j t2 -A t2 -i lo -j t3 -A t3 -i lo -j t4 # -A INPUT -j t4 # -A INPUT -j t3 # -A INPUT -j t2 -A INPUT -j t1 COMMIT Will compute a chain depth of 2 if the comments are removed. Revert back to counting the number of chains for the time being. Reported-by: Cong Wang <cwang@twopensource.com> Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-28Bluetooth: Fix SCO link type handling on connection completeKuba Pawlak
Synchronous connections are initially created with type eSCO. Link manager may reject proposed link parameters, which triggers connection setup retry with a different set. Link type embedded in responses should be disregarded until Synchronous Connect Complete returns Success (0x00). Current code updates link type every time which creates an issue when link type changes to SCO and back to eSCO on further attepts. Issue happens with BlackBerry 9100 and 9700 with Intel WilkinsPeak on third connection setup attept 2015-05-18 01:27:57.332242 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 2015-05-18 01:27:57.333604 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.334614 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO Error: Unsupported Remote Feature / Unsupported LMP Feature 2015-05-18 01:27:57.334895 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 2015-05-18 01:27:57.335601 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.336610 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO Error: Unsupported Remote Feature / Unsupported LMP Feature 2015-05-18 01:27:57.336685 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x03c8 2015-05-18 01:27:57.337603 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.342608 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 2015-05-18 01:27:57.377631 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x00 handle 257 bdaddr 30:7C:30:B3:A8:86 type eSCO Air mode: CVSD Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Merge branch 'for-4.2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixlet from Tejun Heo: "Simple blacklist entry addition" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: Add factory recertified Crucial M500s to blacklist
2015-08-28Bluetooth: hci_intel: Add support for platform driverLoic Poulain
A platform device can be used to provide some specific resources in order to manage the controller. In this first patch we retrieve the reset gpio which is used to power on/off the controller. The main issue is to match the current tty with the correct pdev. In case of ACPI, we can easily find the right tty/pdev pair because they are both child of the same UART port. If controller is powered-on from the driver, we need to wait for a HCI boot event before being able to send any command. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: btintel: Add MODULE_FIRMWARE entries for iBT 3.0 controllersMarcel Holtmann
The iBT 3.0 controllers need intel/ibt-11-5.sfi and intel/ibt-11-5.ddc firmware files from linux-firmware repository. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-08-28Bluetooth: btusb: Correct typos based on checkpatch.plMinjune Kim
Signed-off-by: Minjune Kim <infinite.minjune.kim@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: hci_intel: Add Intel baudrate configuration supportLoic Poulain
Implement the set_baudrate callback for hci_intel. - Controller requires a read Intel version command before updating its baudrate. - The operation consists in an async cmd since the controller does not respond at the same speed. - Wait 100ms to let the controller change its baudrate. - Clear RTS until we change our own UART speed Manage speed change in the setup function, we need to restore the oper speed once chip has booted on patched firmware. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: hci_uart: Fix zero len data packet reception issueLoic Poulain
Packets with a variable length value equal to zero were not received. Since no more data expected (and input buffer entirely consumed), we need to complete/forward the packet immediately instead of waiting for more data. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28nl802154: stricter input checking for boolean inputsStefan Schmidt
So far we handled boolean input by forcing them with !! and assigning them into a bool. This allowed userspace to send values > 1 which were used as 1. We should be stricter here and return -EINVAL for all but 0 or 1. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: Make the function sco_conn_del have a return type of voidNicholas Krause
This makes the function sco_conn_del have a return type of void now due to this function always running successfully and thus never needing to signal its caller when a non recoverable internal failure occurs by returning a error code to its respective caller. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: btmrvl: change device pointer passed to dev_coredumpvShengzhen Li
This change ensures we will get driver name as 'btmrvl_sdio' in udev event. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28HID: wacom: wacom_setup_numbered_buttons is local to wacom_wacJiri Kosina
wacom_setup_numbered_buttons() is not used outside of wacom_wac.c, make it static. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28HID: wacom: Add support for Express Key Remote.Aaron Skomra
This device is pad (buttons) only, there is no stylus or touch. Up to five remotes can pair with the device's associated USB dongle. Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28HID: wacom: Set button bits based on a new numbered_buttonsAaron Skomra
Prior to this commit, numbered button bit setting was done separately for each device type in wacom_setup_pad_capabilities(). Here we add a numbered_buttons property to the wacom_features struct and extract the repeated bit setting code to a new function: wacom_settup_numbered_buttons(). Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28Merge tag 'sound-fix-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are stable fixes that have been gathered since rc8: fixes for HD-audio widget power control regressions since 4.1, a NULL fix for HD-audio HDMI, a noise fix for Conexant codecs and a quirk addition for USB-Audio DSD" * tag 'sound-fix-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix path power activation ALSA: hda - Check all inputs for is_active_nid_for_any() ALSA: hda: fix possible NULL dereference ALSA: hda - Shutdown CX20722 on reboot/free to avoid spurious noises ALSA: usb: Add native DSD support for Gustard DAC-X20U
2015-08-28perf evlist: Add backpointer for perf_env to evlistKan Liang
Add backpointer to perf_env in evlist, so we can easily access env when processing something where we have a evsel or evlist. Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1440755289-30939-5-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf tools: Rename perf_session_env to perf_envKan Liang
As it is not necessarily tied to a perf.data file and needs using in places where a perf_session is not required. Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1440755289-30939-4-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf tools: Do not change lib/api/fs/debugfs directlyJiri Olsa
The tracing_events_path is the variable we want to change via --debugfs-dir option, not the debugfs_mountpoint. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1440596813-12844-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf tools: Add tracing_path and remove unneeded functionsJiri Olsa
There's no need for find_tracing_dir, because perf already searches for debugfs/tracefs mount on start and populate tracing_events_path. Adding tracing_path to carry tracing dir string to be used in get_tracing_file instead of calling find_tracing_dir. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1440596813-12844-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf buildid: Introduce sysfs/filename__sprintf_build_idMasami Hiramatsu
Introduce sysfs/filename__sprintf_build_id for consolidating similar code. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150815114259.13642.34685.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf evsel: Add a backpointer to the evlist a evsel is inArnaldo Carvalho de Melo
So that functions that deal primarily with an evsel to access information that concerns the whole evlist it is in. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1440677263-21954-5-git-send-email-kan.liang@intel.com Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf trace: Add header with copyright and background infoArnaldo Carvalho de Melo
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-5yqtfs728r1j1u8zmg8ufxwm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf scripts python: Add new compaction-times scriptTony Jones
This patch creates a new script (compaction-times) to report time spent in mm compaction. It is possible to report times in nanoseconds (default) or microseconds (-u). The option -p will break down results by process id, -pv will further decompose by each compaction entry/exit. For each compaction entry/exit what is reported is controlled by the options: -t report only timing -m report migration stats -ms report migration scanner stats -fs report free scanner stats The default is to report all. Entries may be further filtered by pid, pid-range or comm (regex). The script is useful when analysing workloads that compact memory. The most common example will be THP allocations on systems with a lot of uptime that has fragmented memory. This is an example of using the script to analyse a thpscale from mmtests which deliberately fragments memory and allocates THP in 4 separate threads # Recording step, one of the following; $ perf record -e 'compaction:mm_compaction_*' ./workload # or: $ perf script record compaction-times # Reporting: basic total: 2444505743ns migration: moved=357738 failed=39275 free_scanner: scanned=2705578 isolated=387875 migration_scanner: scanned=414426 isolated=397013 # Reporting: Per task stall times $ perf script report compaction-times -- -t -p total: 2444505743ns 6384[thpscale]: 740800017ns 6385[thpscale]: 274119512ns 6386[thpscale]: 832961337ns 6383[thpscale]: 596624877ns # Reporting: Per-compaction attempts for task 6385 $ perf script report compaction-times -- -m -pv 6385 total: 274119512ns migration: moved=14893 failed=24285 6385[thpscale]: 274119512ns migration: moved=14893 failed=24285 6385[thpscale].1: 3033277ns migration: moved=511 failed=1 6385[thpscale].2: 9592094ns migration: moved=1524 failed=12 6385[thpscale].3: 2495587ns migration: moved=512 failed=0 6385[thpscale].4: 2561766ns migration: moved=512 failed=0 6385[thpscale].5: 2523521ns migration: moved=512 failed=0 ..... output continues ... Changes since v1: - report stats for isolate_migratepages and isolate_freepages (Vlastimil Babka) - refactor code to achieve above - add help text - output to stdout/stderr explicitly Signed-off-by: Tony Jones <tonyj@suse.com> Cc: Mel Gorman <mgorman@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/1439840932-8933-1-git-send-email-tonyj@suse.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28regulator: core: use debug level print in regulator_check_drmsArchit Taneja
When calling regulator_set_load, regulator_check_drms prints and returns an error if the regulator device's flag REGULATOR_CHANGE_DRMS isn't set. drms_uA_update, however, bails out without reporting an error. Replace the error print with a debug level print so that we don't get such prints when the underlying regulator doesn't support DRMS. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 08:24:34 +0000