| Age | Commit message (Collapse) | Author |
|---|
|
Use the MODULE_NAME_LEN definition in module_exists() to obtain the maximum
size of a module name, instead of using MAX_PARAM_PREFIX_LEN. The values
are the same but MODULE_NAME_LEN is more appropriate in this context.
MAX_PARAM_PREFIX_LEN was added in commit 730b69d22525 ("module: check
kernel param length at compile time, not runtime") only to break a circular
dependency between module.h and moduleparam.h, and should mostly be limited
to use in moduleparam.h.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250630143535.267745-5-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
The moduleparam code allows modules to provide their own definition of
MODULE_PARAM_PREFIX, instead of using the default KBUILD_MODNAME ".".
Commit 730b69d22525 ("module: check kernel param length at compile time,
not runtime") added a check to ensure the prefix doesn't exceed
MODULE_NAME_LEN, as this is what param_sysfs_builtin() expects.
Later, commit 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking
for sysfs perms.") removed this check, but there is no indication this was
intentional.
Since the check is still useful for param_sysfs_builtin() to function
properly, reintroduce it in __module_param_call(), but in a modernized form
using static_assert().
While here, clean up the __module_param_call() comments. In particular,
remove the comment "Default value instead of permissions?", which comes
from commit 9774a1f54f17 ("[PATCH] Compile-time check re world-writeable
module params"). This comment was related to the test variable
__param_perm_check_##name, which was removed in the previously mentioned
commit 58f86cc89c33.
Fixes: 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-4-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
The variable last_unloaded_module::name tracks the name of the last
unloaded module. It is a string copy of module::name, which is
MODULE_NAME_LEN bytes in size and includes the NUL terminator. Therefore,
the size of last_unloaded_module::name can also be just MODULE_NAME_LEN,
without the need for an extra byte.
Fixes: e14af7eeb47e ("debug: track and print last unloaded module in the oops trace")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-3-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
Passing a module name longer than MODULE_NAME_LEN to the delete_module
syscall results in its silent truncation. This really isn't much of
a problem in practice, but it could theoretically lead to the removal of an
incorrect module. It is more sensible to return ENAMETOOLONG or ENOENT in
such a case.
Update the syscall to return ENOENT, as documented in the delete_module(2)
man page to mean "No module by that name exists." This is appropriate
because a module with a name longer than MODULE_NAME_LEN cannot be loaded
in the first place.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
The function stubs exposed by module.h allow the code to compile properly
without the ifdeffery. The generated object code stays the same, as the
compiler can optimize away all the dead code.
As the code is still typechecked developer errors can be detected faster.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250711-kunit-ifdef-modules-v2-3-39443decb1f8@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
To write code that works with both CONFIG_MODULES=y and CONFIG_MODULES=n
it is convenient to use "if (IS_ENABLED(CONFIG_MODULES))" over raw #ifdef.
The code will still fully typechecked but the unreachable parts are
discarded by the compiler. This prevents accidental breakage when a certain
kconfig combination was not specifically tested by the developer.
This pattern is already supported to some extend by module.h defining
empty stub functions if CONFIG_MODULES=n.
However some users of module.h work on the structured defined by module.h.
Therefore these structure definitions need to be visible, too.
Many structure members are still gated by specific configuration settings.
The assumption for those is that the code using them will be gated behind
the same configuration setting anyways.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250711-kunit-ifdef-modules-v2-2-39443decb1f8@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
The struct was moved to the public header file in commit c8e21ced08b3
("module: fix kdb's illicit use of struct module_use.").
Back then the structure was used outside of the module core.
Nowadays this is not true anymore, so the structure can be made internal.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20250711-kunit-ifdef-modules-v2-1-39443decb1f8@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
A port link power management (LPM) policy can be controlled using the
link_power_management_policy sysfs host attribute. However, this
attribute exists also for hosts that do not support LPM and in such
case, attempting to change the LPM policy for the host (port) will fail
with -EOPNOTSUPP.
Introduce the new sysfs link_power_management_supported host attribute
to indicate to the user if a the port and the devices connected to the
port for the host support LPM, which implies that the
link_power_management_policy attribute can be used.
Since checking that a port and its devices support LPM is common between
the new ata_scsi_lpm_supported_show() function and the existing
ata_scsi_lpm_store() function, the new helper ata_scsi_lpm_supported()
is introduced.
Fixes: 413e800cadbf ("ata: libata-sata: Disallow changing LPM state if not supported")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202507251014.a5becc3b-lkp@intel.com
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ata_gen_ata_sense() is always called for a failed qc missing sense data
so that a sense key, code and code qualifier can be generated using
ata_to_sense_error() from the qc status and error fields of its result
task file. However, if the qc does not have its result task file filled,
ata_gen_ata_sense() returns early without setting a sense key.
Improve this by defaulting to returning ABORTED COMMAND without any
additional sense code, since we do not know the reason for the failure.
The same fix is also applied in ata_gen_passthru_sense() with the
additional check that the qc failed (qc->err_mask is set).
Fixes: 816be86c7993 ("ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 8ae720449fca ("libata: whitespace fixes in ata_to_sense_error()")
inadvertantly added the entry 0x40 (ATA_DRDY) to the stat_table array in
the function ata_to_sense_error(). This entry ties a failed qc which has
a status filed equal to ATA_DRDY to the sense key ILLEGAL REQUEST with
the additional sense code UNALIGNED WRITE COMMAND. This entry will be
used to generate a failed qc sense key and sense code when the qc is
missing sense data and there is no match for the qc error field in the
sense_table array of ata_to_sense_error().
As a result, for a failed qc for which we failed to get sense data (e.g.
read log 10h failed if qc is an NCQ command, or REQUEST SENSE EXT
command failed for the non-ncq case, the user very often end up seeing
the completely misleading "unaligned write command" error, even if qc
was not a write command. E.g.:
sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
sd 0:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
sd 0:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
I/O error, dev sda, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Fix this by removing the ATA_DRDY entry from the stat_table array so
that we default to always returning ABORTED COMMAND without any
additional sense code, since we do not know any better. The entry 0x08
(ATA_DRQ) is also removed since signaling ABORTED COMMAND with a parity
error is also misleading (as a parity error would likely be signaled
through a bus error). So for this case, also default to returning
ABORTED COMMAND without any additional sense code. With this, the
previous example error case becomes:
sd 0:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#17 Sense Key : Aborted Command [current]
sd 0:0:0:0: [sda] tag#17 Add. Sense: No additional sense information
sd 0:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
I/O error, dev sda, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Together with these fixes, refactor stat_table to make it more readable
by putting the entries comments in front of the entries and using the
defined status bits macros instead of hardcoded values.
Reported-by: Lorenz Brun <lorenz@brun.one>
Reported-by: Brandon Schwartz <Brandon.Schwartz@wdc.com>
Fixes: 8ae720449fca ("libata: whitespace fixes in ata_to_sense_error()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Don't populate the read-only arrays on the stack at run time, instead
make them static const. Also reduces overall size.
before:
text data bss dec hex filename
367439 89582 5952 462973 7107d drivers/scsi/scsi_debug.o
after:
text data bss dec hex filename
365847 90702 5952 462501 70ea5 drivers/scsi/scsi_debug.o
(gcc 14.2.0, x86-64)
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250729064930.1659007-1-colin.i.king@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
|
|
netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:
rmem < READ_ONCE(sk->sk_rcvbuf)
to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:
rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)
The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
(t=26000 jiffies g=230833 q=259957)
NMI backtrace for cpu 0
CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
Call Trace:
<IRQ>
dump_stack lib/dump_stack.c:120
nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
update_process_times kernel/time/timer.c:1953
tick_sched_handle kernel/time/tick-sched.c:227
tick_sched_timer kernel/time/tick-sched.c:1399
__hrtimer_run_queues kernel/time/hrtimer.c:1652
hrtimer_interrupt kernel/time/hrtimer.c:1717
__sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
</IRQ>
netlink_attachskb net/netlink/af_netlink.c:1234
netlink_unicast net/netlink/af_netlink.c:1349
kauditd_send_queue kernel/audit.c:776
kauditd_thread kernel/audit.c:897
kthread kernel/kthread.c:328
ret_from_fork arch/x86/entry/entry_64.S:304
Restore the original behavior of the check which commit in Fixes
accidentally missed when restructuring the code.
Found by Linux Verification Center (linuxtesting.org).
Fixes: ae8f160e7eb2 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250728080727.255138-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit aabc6596ffb3 ("net: ppp: Add bound checking for skb data
on ppp_sync_txmung") fixed ppp_sync_txmunge()
We need a similar fix in pptp_xmit(), otherwise we might
read uninit data as reported by syzbot.
BUG: KMSAN: uninit-value in pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193
pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2290 [inline]
ppp_input+0x1d6/0xe60 drivers/net/ppp/ppp_generic.c:2314
pppoe_rcv_core+0x1e8/0x760 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x142/0x420 include/net/sock.h:1148
__release_sock+0x1d3/0x330 net/core/sock.c:3213
release_sock+0x6b/0x270 net/core/sock.c:3767
pppoe_sendmsg+0x15d/0xcb0 drivers/net/ppp/pppoe.c:904
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x893/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmmsg+0x2d9/0x7c0 net/socket.c:2709
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+afad90ffc8645324afe5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68887d86.a00a0220.b12ec.00cd.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/20250729080207.1863408-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit bafbdd527d56 ("phylib: Add device reset GPIO support") removed
devm_gpiod_get_optional() in favor of the non-devres managed
fwnode_get_named_gpiod(). When it was kind-of reverted by commit
40ba6a12a548 ("net: mdio: switch to using gpiod_get_optional()"), the devm
functionality was not reinstated. Nor was the GPIO unclaimed on device
remove. This leads to the GPIO being claimed indefinitely, even when the
device and/or the driver gets removed.
Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support")
Fixes: 40ba6a12a548 ("net: mdio: switch to using gpiod_get_optional()")
Cc: Csaba Buday <buday.csaba@prolan.hu>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250728153455.47190-2-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the LAN8710A datasheet (Rev. B, section 3.8.5.1), a hardware
reset is required after power-on, and the reference clock (REF_CLK) must be
established before asserting reset.
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Cc: Csókás Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250728152916.46249-2-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handle the case for v5.1 and v5.5 instead of returning "0.0".
Also reword the comment below since I don't see any evidence of such a
check happening, and - since 5.5 has been missing - can happen.
Fixes: 3aac8ec1c028 ("net: ipa: add some new IPA versions")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250728-ipa-5-1-5-5-version_string-v1-1-d7a5623d7ece@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the 1588 standard, it is possible to use both unicast and
multicast frames to send the PTP information. It was noticed that if the
frames were unicast they were not processed by the analyzer meaning that
they were not timestamped. Therefore fix this to match also these
unicast frames.
Fixes: ab2bf9339357 ("net: phy: mscc: 1588 block initialization")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250726140307.3039694-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Paolo spotted hangs in NIPA running driver tests against virtio.
The tests hang in virtnet_close() -> virtnet_napi_tx_disable().
The problem is only reproducible if running multiple of our tests
in sequence (I used TEST_PROGS="xdp.py ping.py netcons_basic.sh \
netpoll_basic.py stats.py"). Initial suspicion was that this is
a simple case of double-disable of NAPI, but instrumenting the
code reveals:
Deadlocked on NAPI ffff888007cd82c0 (virtnet_poll_tx):
state: 0x37, disabled: false, owner: 0, listed: false, weight: 64
The NAPI was not in fact disabled, owner is 0 (rather than -1),
so the NAPI "thinks" it's scheduled for CPU 0 but it's not listed
(!list_empty(&n->poll_list) => false). It seems odd that normal NAPI
processing would wedge itself like this.
Better suspicion is that netpoll gets enabled while NAPI is polling,
and also grabs the NAPI instance. This confuses napi_complete_done():
[netpoll] [normal NAPI]
napi_poll()
have = netpoll_poll_lock()
rcu_access_pointer(dev->npinfo)
return NULL # no netpoll
__napi_poll()
->poll(->weight)
poll_napi()
cmpxchg(->poll_owner, -1, cpu)
poll_one_napi()
set_bit(NAPI_STATE_NPSVC, ->state)
napi_complete_done()
if (NAPIF_STATE_NPSVC)
return false
# exit without clearing SCHED
This feels very unlikely, but perhaps virtio has some interactions
with the hypervisor in the NAPI ->poll that makes the race window
larger?
Best I could to to prove the theory was to add and trigger this
warning in napi_poll (just before netpoll_poll_unlock()):
WARN_ONCE(!have && rcu_access_pointer(n->dev->npinfo) &&
napi_is_scheduled(n) && list_empty(&n->poll_list),
"NAPI race with netpoll %px", n);
If this warning hits the next virtio_close() will hang.
This patch survived 30 test iterations without a hang (without it
the longest clean run was around 10). Credit for triggering this
goes to Breno's recent netconsole tests.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/c5a93ed1-9abe-4880-a3bb-8d1678018b1d@redhat.com
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250726010846.1105875-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Johan Hovold says:
====================
net: ethernet: fix device leaks
This series fixes devices leaks stemming from failure to drop the
reference taken by of_find_device_by_node().
====================
Link: https://patch.msgid.link/20250725171213.880-1-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure to drop the references to the IEP OF node and device taken by
of_parse_phandle() and of_find_device_by_node() when looking up IEP
devices during probe.
Drop the bogus additional reference taken on successful lookup so that
the device is released correctly by icss_iep_put().
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
Cc: stable@vger.kernel.org # 6.6
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The reference count to the WED devices has already been incremented when
looking them up using of_find_device_by_node() so drop the bogus
additional reference taken during probe.
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Cc: stable@vger.kernel.org # 5.19
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-5-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure to drop the reference to the ptp device taken by
of_find_device_by_node() when querying the time stamping capabilities.
Note that holding a reference to the ptp device does not prevent its
driver data from going away.
Fixes: 7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Cc: stable@vger.kernel.org # 4.18
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-4-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure to drop the references to the IERB OF node and platform device
taken by of_parse_phandle() and of_find_device_by_node() during probe.
Fixes: e7d48e5fbf30 ("net: enetc: add a mini driver for the Integrated Endpoint Register Block")
Cc: stable@vger.kernel.org # 5.13
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-3-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure to drop the reference to the ptp device taken by
of_find_device_by_node() when querying the time stamping capabilities.
Note that holding a reference to the ptp device does not prevent its
driver data from going away.
Fixes: 17ae0b0ee9db ("dpaa_eth: add the get_ts_info interface for ethtool")
Cc: stable@vger.kernel.org # 4.19
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-2-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Flags passed in for splice() syscall should not end up in
skb_recv_datagram(). As SPLICE_F_NONBLOCK == MSG_PEEK, kernel gets
confused: skb isn't unlinked from a receive queue, while strp_msg::offset
and strp_msg::full_len are updated.
Unbreak the logic a bit more by mapping both O_NONBLOCK and
SPLICE_F_NONBLOCK to MSG_DONTWAIT. This way we align with man splice(2) in
regard to errno EAGAIN:
SPLICE_F_NONBLOCK was specified in flags or one of the file descriptors
had been marked as nonblocking (O_NONBLOCK), and the operation would
block.
Fixes: 5121197ecc5d ("kcm: close race conditions on sk_receive_queue")
Fixes: 91687355b927 ("kcm: Splice support")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250725-kcm-splice-v1-1-9a725ad2ee71@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LKP found a random config which failed to build because IO accessors
were not defined:
In file included from drivers/i3c/master.c:21:
drivers/i3c/internals.h: In function 'i3c_writel_fifo':
>> drivers/i3c/internals.h:35:9: error: implicit declaration of function 'writesl' [-Werror=implicit-function-declaration]
Add the proper header to where the IO accessors are used.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507150208.BZDzzJ5E-lkp@intel.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250717120046.9022-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on
hardware that previously advertised it unconditionally
- Map supporting endpoints with cacheable memory attributes on
systems with FEAT_S2FWB and DIC where KVM no longer needs to
perform cache maintenance on the address range
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the
guest hypervisor to inject external aborts into an L2 VM and take
traps of masked external aborts to the hypervisor
- Convert more system register sanitization to the config-driven
implementation
- Fixes to the visibility of EL2 registers, namely making VGICv3
system registers accessible through the VGIC device instead of the
ONE_REG vCPU ioctls
- Various cleanups and minor fixes
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O
APIC, PIC, and PIT emulation at compile time
- Share device posted IRQ code between SVM and VMX and harden it
against bugs and runtime errors
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups
O(1) instead of O(n)
- For MMIO stale data mitigation, track whether or not a vCPU has
access to (host) MMIO based on whether the page tables have MMIO
pfns mapped; using VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are
more or less identical
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently
- Fix a user-triggerable WARN that syzkaller found by setting the
vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting
the vCPU into VMX Root Mode (post-VMXON). Trying to detect every
possible path leading to architecturally forbidden states is hard
and even risks breaking userspace (if it goes from valid to valid
state but passes through invalid states), so just wait until
KVM_RUN to detect that the vCPU state isn't allowed
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling
interception of APERF/MPERF reads, so that a "properly" configured
VM can access APERF/MPERF. This has many caveats (APERF/MPERF
cannot be zeroed on vCPU creation or saved/restored on suspend and
resume, or preserved over thread migration let alone VM migration)
but can be useful whenever you're interested in letting Linux
guests see the effective physical CPU frequency in /proc/cpuinfo
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a
"secure" TSC, so kill two birds with one stone
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list)
- Extract many of KVM's helpers for accessing architectural local
APIC state to common x86 so that they can be shared by guest-side
code for Secure AVIC
- Various cleanups and fixes
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to
prevent L1 from running L2 with features that KVM doesn't support,
e.g. BTF
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel
if the nested SVM MSRPM offsets tracker can't handle an MSR (which
is pretty much a static condition and therefore should never
happen, but still)
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected
by erratum #1235, to allow (safely) enabling AVIC on such CPUs
- Request GA Log interrupts if and only if the target vCPU is
blocking, i.e. only if KVM needs a notification in order to wake
the vCPU
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to
the vCPU's CPUID model
- Accept any SNP policy that is accepted by the firmware with respect
to SMT and single-socket restrictions. An incompatible policy
doesn't put the kernel at risk in any way, so there's no reason for
KVM to care
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache
maintenance
- When reclaiming memory from an SEV guest, only do cache flushes on
CPUs that have ever run a vCPU for the guest, i.e. don't flush the
caches for CPUs that can't possibly have cache lines with dirty,
encrypted data
Generic:
- Rework irqbypass to track/match producers and consumers via an
xarray instead of a linked list. Using a linked list leads to
O(n^2) insertion times, which is hugely problematic for use cases
that create large numbers of VMs. Such use cases typically don't
actually use irqbypass, but eliminating the pointless registration
is a future problem to solve as it likely requires new uAPI
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a
"void *", to avoid making a simple concept unnecessarily difficult
to understand
- Decouple device posted IRQs from VFIO device assignment, as binding
a VM to a VFIO group is not a requirement for enabling device
posted IRQs
- Clean up and document/comment the irqfd assignment code
- Disallow binding multiple irqfds to an eventfd with a priority
waiter, i.e. ensure an eventfd is bound to at most one irqfd
through the entire host, and add a selftest to verify eventfd:irqfd
bindings are globally unique
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions
- Drop guest_memfd's .getattr() implementation as the VFS layer will
call generic_fillattr() if inode_operations.getattr is NULL
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep
KVM in a tight loop indefinitely
- Kill off kvm_arch_{start,end}_assignment() and x86's associated
tracking, now that KVM no longer uses assigned_device_count as a
heuristic for either irqbypass usage or MDS mitigation
Selftests:
- Fix a comment typo
- Verify KVM is loaded when getting any KVM module param so that
attempting to run a selftest without kvm.ko loaded results in a
SKIP message about KVM not being loaded/enabled (versus some random
parameter not existing)
- Skip tests that hit EACCES when attempting to access a file, and
print a "Root required?" help message. In most cases, the test just
needs to be run with elevated permissions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits)
Documentation: KVM: Use unordered list for pre-init VGIC registers
RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map()
RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs
RISC-V: perf/kvm: Add reporting of interrupt events
RISC-V: KVM: Enable ring-based dirty memory tracking
RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap
RISC-V: KVM: Delegate illegal instruction fault to VS mode
RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs
RISC-V: KVM: Factor-out g-stage page table management
RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence
RISC-V: KVM: Introduce struct kvm_gstage_mapping
RISC-V: KVM: Factor-out MMU related declarations into separate headers
RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range()
RISC-V: KVM: Don't flush TLB when PTE is unchanged
RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH
RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize()
RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init()
RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value
KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix for a UAF in the xen gntdev-dmabuf driver
- fix in the xen netfront driver avoiding spurious interrupts
- fix in the gntdev driver avoiding a large stack allocation
- cleanup removing some dead code
- build warning fix
- cleanup of the sysfs code in the xen-pciback driver
* tag 'for-linus-6.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/netfront: Fix TX response spurious interrupts
xen/gntdev: remove struct gntdev_copy_batch from stack
xen: fix UAF in dmabuf_exp_from_pages()
xen: Remove some deadcode (x)
xen-pciback: Replace scnprintf() with sysfs_emit_at()
xen/xenbus: fix W=1 build warning in xenbus_va_dev_error function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracepoint cleanup from Steven Rostedt:
"Remove or hide unused tracepoints
Tracepoints take up memory (around 5K per tracepoint) even when they
are unused. Changes are being made to detect when a tracepoint is
defined but unused and a warning is shown at build. But those changes
are not yet ready for inclusion.
- Fix some of the unused tracepoints that it detected
Some tracepoints were removed and others were hidden by config
settings to match the config settings of where they are
instantiated. Some tracepoints were moved into architecture
specific code as only one architecture used them.
- Call the ftrace_test_filter tracepoint in an unreachable if
statement
The ftrace_test_filter tracepoint which is defined when ftrace
selftests are configured and is used to test the filter logic, but
the tracepoint is not actually called. It is put into an if
statement to not have it get compiled out, but also not warn for
not being used"
* tag 'trace-unused-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: sched: Hide numa events under CONFIG_NUMA_BALANCING
powerpc/thp: tracing: Hide hugepage events under CONFIG_PPC_BOOK3S_64
tracing: Call trace_ftrace_test_filter() for the event
tracing: arm: arm64: Hide trace events ipi_raise, ipi_entry and ipi_exit
binder: Remove unused binder lock events
PM: tracing: Hide power_domain_target event under ARCH_OMAP2PLUS
PM: tracing: Hide device_pm_callback events under PM_SLEEP
PM: tracing: Hide psci_domain_idle events under ARM_PSCI_CPUIDLE
PM: cpufreq: powernv/tracing: Move powernv_throttle trace event
alarmtimer: Hide alarmtimer_suspend event when RTC_CLASS is not configured
tracing, AER: Hide PCIe AER event when PCIEAER is not configured
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075417.3218742-1-sakari.ailus@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250704075416.3218647-1-sakari.ailus@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
In a private write transfer, the driver pre-fills the FIFO to work around
the FIFO_EMPTY quirk. However, if an IBIWON event occurs, the hardware
emits a NACK and the driver initiates a retry. During the retry, driver
attempts to pre-fill the FIFO again if there is remaining data, but since
the FIFO is already full, this leads to data loss.
Check available space in FIFO to prevent overflow.
Fixes: 4008a74e0f9b ("i3c: master: svc: Fix npcm845 FIFO empty issue")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Link: https://lore.kernel.org/r/20250730003719.1825593-1-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add a basic driver for the I3C controller found in Renesas RZ/G3S and
G3E SoCs. Support I3C pure busses (tested with two targets) and mixed
busses (two I3C devices plus various I2C targets). DAA and communication
with temperature sensors worked reliably at various speeds.
Missing features such as IBI, HotJoin, and target mode will be added
incrementally.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724094146.6443-5-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add Renesas I3C controller which is available in R9A08G045 (RZ/G3S) and
R9A09G047 (RZ/G3E) SoCs.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724094146.6443-4-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add standard timing value definition from specification.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724094146.6443-3-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Align existing defines to follow the consistent pattern:
I3C_BUS_<PARAM>_<MAX|MIN|TYP>_<UNIT>. Prepare the codebase for adding
new parameters and help avoid duplication.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724094146.6443-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When CONFIG_I3C is disabled and the i3c_i2c_driver_register() happens
to not be inlined, any driver calling it still references the i3c_driver
instance, which then causes a link failure:
x86_64-linux-ld: drivers/hwmon/lm75.o: in function `lm75_i3c_reg_read':
lm75.c:(.text+0xc61): undefined reference to `i3cdev_to_dev'
x86_64-linux-ld: lm75.c:(.text+0xd25): undefined reference to `i3c_device_do_priv_xfers'
x86_64-linux-ld: lm75.c:(.text+0xdd8): undefined reference to `i3c_device_do_priv_xfers'
This issue was part of the original i3c code, but only now caused problems
when i3c support got added to lm75.
Change the 'inline' annotations in the header to '__always_inline' to
ensure that the dead-code-elimination pass in the compiler can optimize
it out as intended.
Fixes: 6071d10413ff ("hwmon: (lm75) add I3C support for P3T1755")
Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250725090609.2456262-1-arnd@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The two clocks, driver is getting, are not being disabled/re-enabled
during runtime of the device. Eliminate one variable in state struct,
all error paths and a lot of code from probe() and remove() by using
devm_clk_get_enabled().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250713152411.74917-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verification updates from Steven Rostedt:
- Added Linear temporal logic monitors for RT application
Real-time applications may have design flaws causing them to have
unexpected latency. For example, the applications may raise page
faults, or may be blocked trying to take a mutex without priority
inheritance.
However, while attempting to implement DA monitors for these
real-time rules, deterministic automaton is found to be inappropriate
as the specification language. The automaton is complicated, hard to
understand, and error-prone.
For these cases, linear temporal logic is found to be more suitable.
The LTL is more concise and intuitive.
- Make printk_deferred() public
The new monitors needed access to printk_deferred(). Make them
visible for the entire kernel.
- Add a vpanic() to allow for va_list to be passed to panic.
- Add rtapp container monitor.
A collection of monitors that check for common problems with
real-time applications that cause unexpected latency.
- Add page fault tracepoints to risc-v
These tracepoints are necessary to for the RV monitor to run on
risc-v.
- Fix the behaviour of the rv tool with -s and idle tasks.
- Allow the rv tool to gracefully terminate with SIGTERM
- Adjusts dot2c not to create lines over 100 columns
- Properly order nested monitors in the RV Kconfig file
- Return the registration error in all DA monitor instead of 0
- Update and add new sched collection monitors
Replace tss and sncid monitors with more complete sts:
Not only prove that switches occur in scheduling context and scheduling
needs interrupt disabled but also that each call to the scheduler
disables interrupts to (optionally) switch.
New monitor: nrp
Preemption requires need resched which is cleared by any switch
(includes a non optimal workaround for /nested/ preemptions)
New monitor: sssw
suspension requires setting the task to sleepable and, after the
switch occurs, the task requires a wakeup to come back to runnable
New monitor: opid
waking and need-resched operations occur with interrupts and
preemption disabled or in IRQ without explicitly disabling
preemption"
* tag 'trace-rv-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (48 commits)
rv: Add opid per-cpu monitor
rv: Add nrp and sssw per-task monitors
rv: Replace tss and sncid monitors with more complete sts
sched: Adapt sched tracepoints for RV task model
rv: Retry when da monitor detects race conditions
rv: Adjust monitor dependencies
rv: Use strings in da monitors tracepoints
rv: Remove trailing whitespace from tracepoint string
rv: Add da_handle_start_run_event_ to per-task monitors
rv: Fix wrong type cast in reactors_show() and monitor_reactor_show()
rv: Fix wrong type cast in monitors_show()
rv: Remove struct rv_monitor::reacting
rv: Remove rv_reactor's reference counter
rv: Merge struct rv_reactor_def into struct rv_reactor
rv: Merge struct rv_monitor_def into struct rv_monitor
rv: Remove unused field in struct rv_monitor_def
rv: Return init error when registering monitors
verification/rvgen: Organise Kconfig entries for nested monitors
tools/dot2c: Fix generated files going over 100 column limit
tools/rv: Stop gracefully also on SIGTERM
...
|
|
Sphinx reports indentation warning on i3c_device_do_priv_xfers() return
value list:
Documentation/driver-api/i3c/device-driver-api:9: ./drivers/i3c/device.c:31: ERROR: Unexpected indentation. [docutils]
Format the list as bullet list to fix the warning.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250702040424.18577-1-bagasdotme@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use common inline i3c_writel_fifo()/i3c_readl_fifo() methods to
simplify code since the FIFO of controller is a 32bit width.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250624-i3c-writesl-readsl-v3-3-63ccf0870f01@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use common inline i3c_writel_fifo()/i3c_readl_fifo() methods to
simplify code since the FIFO of controller is a 32bit width.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250624-i3c-writesl-readsl-v3-2-63ccf0870f01@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The I3C abstraction expects u8 buffers, but some controllers operate with
a 32-bit bus width FIFO and cannot flag valid bytes individually. To avoid
reading or writing outside the buffer bounds, use 32-bit accesses where
possible and apply memcpy for any remaining bytes
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250624-i3c-writesl-readsl-v3-1-63ccf0870f01@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Rewind persistent ring buffer on boot
When the persistent ring buffer is being used for live kernel tracing
and the system crashes, the tool that is reading the trace may not
have recorded the data when the system crashed.
Although the persistent ring buffer still has that data, when reading
it after a reboot, it will start where it left off. That is, what was
read will not be accessible.
Instead, on reboot, have the persistent ring buffer restart where the
data starts and this will allow the tooling to recover what was lost
when the crash occurred.
- Remove the ring_buffer_read_prepare_sync() logic
Reading the trace file required stopping writing to the ring buffer
as the trace file is only an iterator and does not consume what it
read. It was originally not safe to read the ring buffer in this mode
and required disabling writing. The ring_buffer_read_prepare_sync()
logic was used to stop each per_cpu ring buffer, call
synchronize_rcu() and then start the iterator. This was used instead
of calling synchronize_rcu() for each per_cpu buffer.
Today, the iterator has been updated where it is safe to read the
trace file while writing to the ring buffer is still occurring. There
is no more need to do this synchronization and it is causing large
delays on machines with many CPUs. Remove this unneeded
synchronization.
- Make static string array a constant in show_irq_str()
Making the string array into a constant has shown to decrease code
text/data size.
* tag 'trace-ringbuffer-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Make the const read-only 'type' static
ring-buffer: Remove ring_buffer_read_prepare_sync()
tracing: ring_buffer: Rewind persistent ring buffer on reboot
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Keep track of when fgraph_ops are registered or not
Keep accounting of when fgraph_ops are registered as if a fgraph_ops
is registered twice it can mess up the accounting and it will not
work as expected later. Trigger a warning if something registers it
twice as to catch bugs before they are found by things just not
working as expected.
- Make DYNAMIC_FTRACE always enabled for architectures that support it
As static ftrace (where all functions are always traced) is very
expensive and only exists to help architectures support ftrace, do
not make it an option. As soon as an architecture supports
DYNAMIC_FTRACE make it use it. This simplifies the code.
- Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it
redundant with the HAVE_DYNAMIC_FTRACE.
- Make pid_ptr string size match the comment
In print_graph_proc() the pid_ptr string is of size 11, but the
comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12.
* tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it
fgraph: Keep track of when fgraph_ops are registered or not
fgraph: Make pid_str size match the comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Add new -D option that allows to override variables and options
For example:
./ktest.pl -DPATCH_START:=HEAD~1 -DOUTPUT_DIR=/work/build/urgent config
The above sets the variable "PATCH_START" to HEAD~1 and the
OUTPUT_DIR option to "/work/build/urgent".
This is useful because currently the only way to make a slight change
to a config file is by modifying that config file. For one time
changes, this can be annoying. Having a way to do a one time override
from the command line simplifies the workflow.
Temp variables (PATCH_START) will override every temp variable in the
config file, whereas options will act like a normal OVERRIDE option
and will only affect the session they define.
-DBUILD_OUTPUT=/work/git/linux.git
Replaces the default BUILD_OUTPUT option.
'-DBUILD_OUTPUT[2]=/work/git/linux.git'
Only replaces the BUILD_OUTPUT variable for test #2.
- If an option contains itself, just drop it instead of going into an
infinite loop and failing to parse (it doesn't crash, it detects the
recursion after 100 iterations anyway).
Some configs may define a variable with the same name as the option:
ADD_CONFIG := $(ADD_CONFIG)
But if the option doesn't exist, it the above will fail to parse. In
these cases, just ignore evaluating the option inside the definition
of another option if it has the same name.
- Display the BUILD_DIR and OUTPUT_DIR options at the start of every
test
It is useful to know which kernel source and what destination a test
is using when it starts, in case a mistake is made. This makes it
easier to abort the test if the wrong source or destination is being
used instead of waiting until the test completes.
- Add new PATCHCHECK_SKIP option
When testing a series of commits that also includes changes to the
Linux tools directory, it is useless to test the changes in tools as
they may not affect the kernel itself. Doing tests on the kernel for
changes that do not affect the kernel is a waste of time.
Add a PATCHCHECK_SKIP that takes a series of shas that will be
skipped while doing the individual commit tests.
* tag 'ktest-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Add new PATCHCHECK_SKIP option to skip testing individual commits
ktest.pl: Always display BUILD_DIR and OUTPUT_DIR at the start of tests
ktest.pl: Prevent recursion of default variable options
ktest.pl: Have -D option work without a space
ktest.pl: Allow command option -D to override temp variables
ktest.pl: Add -D option to override options
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Stack usage reduction for probe events:
- Allocate string buffers from the heap for uprobe, eprobe, kprobe,
and fprobe events to avoid stack overflow
- Allocate traceprobe_parse_context from the heap to prevent
potential stack overflow
- Fix a typo in the above commit
New features for eprobe and tprobe events:
- Add support for arrays in eprobes
- Support multiple tprobes on the same tracepoint
Improve efficiency:
- Register fprobe-events only when it is enabled to reduce overhead
- Register tracepoints for tprobe events only when enabled to resolve
a lock dependency
Code Cleanup:
- Add kerneldoc for traceprobe_parse_event_name() and
__get_insn_slot()
- Sort #include alphabetically in the probes code
- Remove the unused 'mod' field from the tprobe-event
- Clean up the entry-arg storing code in probe-events
Selftest update
- Enable fprobe events before checking enable_functions in selftests"
* tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: trace_fprobe: Fix typo of the semicolon
tracing: Have eprobes handle arrays
tracing: probes: Add a kerneldoc for traceprobe_parse_event_name()
tracing: uprobe-event: Allocate string buffers from heap
tracing: eprobe-event: Allocate string buffers from heap
tracing: kprobe-event: Allocate string buffers from heap
tracing: fprobe-event: Allocate string buffers from heap
tracing: probe: Allocate traceprobe_parse_context from heap
tracing: probes: Sort #include alphabetically
kprobes: Add missing kerneldoc for __get_insn_slot
tracing: tprobe-events: Register tracepoint when enable tprobe event
selftests: tracing: Enable fprobe events before checking enable_functions
tracing: fprobe-events: Register fprobe-events only when it is enabled
tracing: tprobe-events: Support multiple tprobes on the same tracepoint
tracing: tprobe-events: Remove mod field from tprobe-event
tracing: probe-events: Cleanup entry-arg storing code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- Fix a potential infinite recursion in fprobe by using preempt_*_notrace()
* tag 'probes-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe: Fix infinite recursion using preempt_*_notrace()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- tools/bootconfig:
- Fix unaligned access when building footer to avoid SIGBUS
- Cleanup bootconfig footer size calculations
- test scripts:
- Fix to add shebang for a test script
- Improve script portability using portable commands
- Improve script portability using printf instead of echo
- Enclose regex with quotes for syntax highlighter
* tag 'bootconfig-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Fix unaligned access when building footer
tools/bootconfig: scripts/ftrace.sh was missing the shebang line, so added it
tools/bootconfig: Cleanup bootconfig footer size calculations
tools/bootconfig: Replace some echo with printf for more portability
tools/bootconfig: Improve portability
tools: bootconfig: Regex enclosed with quotes to make syntax highlight proper
|
