summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-07udp6: fix UDP/IPv6 encap resubmit pathBill Sommerfeld
IPv4 interprets a negative return value from a protocol handler as a request to redispatch to a new protocol. In contrast, IPv6 interprets a negative value as an error, and interprets a positive value as a request for redispatch. UDP for IPv6 was unaware of this difference. Change __udp6_lib_rcv() to return a positive value for redispatch. Note that the socket's encap_rcv hook still needs to return a negative value to request dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to identify the byte containing the next protocol. Signed-off-by: Bill Sommerfeld <wsommerfeld@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07be2net: Don't leak iomapped memory on removal.Douglas Miller
The adapter->pcicfg resource is either mapped via pci_iomap() or derived from adapter->db. During be_remove() this resource was ignored and so could remain mapped after remove. Add a flag to track whether adapter->pcicfg was mapped or not, then use that flag in be_unmap_pci_bars() to unmap if required. Fixes: 25848c901 ("use PCI MMIO read instead of config read for errors") Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07vmxnet3: avoid calling pskb_may_pull with interrupts disabledNeil Horman
vmxnet3 has a function vmxnet3_parse_and_copy_hdr which, among other operations, uses pskb_may_pull to linearize the header portion of an skb. That operation eventually uses local_bh_disable/enable to ensure that it doesn't race with the drivers bottom half handler. Unfortunately, vmxnet3 preforms this parse_and_copy operation with a spinlock held and interrupts disabled. This causes us to run afoul of the WARN_ON_ONCE(irqs_disabled()) warning in local_bh_enable, resulting in this: WARNING: at kernel/softirq.c:159 local_bh_enable+0x59/0x90() (Not tainted) Hardware name: VMware Virtual Platform Modules linked in: ipv6 ppdev parport_pc parport microcode e1000 vmware_balloon vmxnet3 i2c_piix4 sg ext4 jbd2 mbcache sd_mod crc_t10dif sr_mod cdrom mptspi mptscsih mptbase scsi_transport_spi pata_acpi ata_generic ata_piix vmwgfx ttm drm_kms_helper drm i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mperf] Pid: 6229, comm: sshd Not tainted 2.6.32-616.el6.i686 #1 Call Trace: [<c04624d9>] ? warn_slowpath_common+0x89/0xe0 [<c0469e99>] ? local_bh_enable+0x59/0x90 [<c046254b>] ? warn_slowpath_null+0x1b/0x20 [<c0469e99>] ? local_bh_enable+0x59/0x90 [<c07bb936>] ? skb_copy_bits+0x126/0x210 [<f8d1d9fe>] ? ext4_ext_find_extent+0x24e/0x2d0 [ext4] [<c07bc49e>] ? __pskb_pull_tail+0x6e/0x2b0 [<f95a6164>] ? vmxnet3_xmit_frame+0xba4/0xef0 [vmxnet3] [<c05d15a6>] ? selinux_ip_postroute+0x56/0x320 [<c0615988>] ? cfq_add_rq_rb+0x98/0x110 [<c0852df8>] ? packet_rcv+0x48/0x350 [<c07c5839>] ? dev_queue_xmit_nit+0xc9/0x140 ... Fix it by splitting vmxnet3_parse_and_copy_hdr into two functions: vmxnet3_parse_hdr, which sets up the internal/on stack ctx datastructure, and pulls the skb (both of which can be done without holding the spinlock with irqs disabled and vmxnet3_copy_header, which just copies the skb to the tx ring under the lock safely. tested and shown to correct the described problem. Applies cleanly to the head of the net tree Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07Merge tag 'wireless-drivers-for-davem-2016-03-04' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.5 iwlwifi * free firmware paging memory when the module is unloaded or device removed * fix pending frames counter to fix an issue when removing stations ssb * fix a build problem related to ssb_fill_sprom_with_fallback() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEMKrzysztof Kozlowski
The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet direct dependencies. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07ibmveth: check return of skb_linearize in ibmveth_start_xmitThomas Falcon
If skb_linearize fails, the driver should drop the packet instead of trying to copy it into the bounce buffer. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07cdc_ncm: toggle altsetting to force reset before setupBjørn Mork
Some devices will silently fail setup unless they are reset first. This is necessary even if the data interface is already in altsetting 0, which it will be when the device is probed for the first time. Briefly toggling the altsetting forces a function reset regardless of the initial state. This fixes a setup problem observed on a number of Huawei devices, appearing to operate in NTB-32 mode even if we explicitly set them to NTB-16 mode. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07EDAC, sb_edac: Fix logic when computing DIMM sizes on Xeon PhiHubert Chrzaniuk
Correct a typo introduced by d0cdf9003140 ("EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support") As a result under some configurations DIMMs were not correctly recognized. Problem affects only Xeon Phi architecture. Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: lukasz.anaczkowski@intel.com Link: http://lkml.kernel.org/r/1457361045-26221-1-git-send-email-hubert.chrzaniuk@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-07PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.hBjorn Helgaas
Christoph added a generic include/linux/pci-dma-compat.h, so now there's one place with most of the PCI DMA interfaces. Move more PCI DMA-related things there: - The PCI_DMA_* direction constants from linux/pci.h - The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary() CONFIG_PCI implementations from drivers/pci/pci.c - The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary() !CONFIG_PCI stubs from linux/pci.h - The pci_set_dma_mask() and pci_set_consistent_dma_mask() !CONFIG_PCI stubs from linux/pci.h Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-07drm/i915: Fix bogus dig_port_map[] assignment for pre-HSWTakashi Iwai
The recent commit [0bdf5a05647a: drm/i915: Add reverse mapping between port and intel_encoder] introduced a reverse mapping to retrieve intel_dig_port object from the port number. The code assumed that the port vs intel_dig_port are 1:1 mapping. But in reality, this was a too naive assumption. As Martin reported about the missing HDMI audio on his SNB machine, pre-HSW chips may have multiple intel_dig_port objects corresponding to the same port. Since we assign the mapping statically at the init time and the multiple objects override the map, it may not match with the actually enabled output. This patch tries to address the regression above. The reverse mapping is provided basically only for the audio callbacks, so now we set / clear the mapping dynamically at enabling and disabling HDMI/DP audio, so that we can always track the latest and correct object corresponding to the given port. Fixes: 0bdf5a05647a ('drm/i915: Add reverse mapping between port and intel_encoder') Reported-and-tested-by: Martin Kepplinger <martink@posteo.de> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456324522-21591-1-git-send-email-tiwai@suse.de (cherry picked from commit 9dfbffcf4ac0707097af9e6c1372192b9d03a357) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-03-07usbnet: cleanup after bind() in probe()Oliver Neukum
In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07PCI: Move pci_dma_* helpers to common codeChristoph Hellwig
For a long time all architectures implement the pci_dma_* functions using the generic DMA API, and they all use the same header to do so. Move this header, pci-dma-compat.h, to include/linux and include it from the generic pci.h instead of having each arch duplicate this include. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-07Merge branch 'mlxsw-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: couple of fixes Couple of fixes from Ido. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07mlxsw: pci: Correctly determine if descriptor queue is fullIdo Schimmel
The descriptor queues for sending (SDQs) and receiving (RDQs) packets are managed by two counters - producer and consumer - which are both 16-bit in size. A queue is considered full when the difference between the two equals the queue's maximum number of descriptors. However, if the producer counter overflows, then it's possible for the full queue check to fail, as it doesn't take the overflow into account. In such a case, descriptors already passed to the device - but for which a completion has yet to be posted - will be overwritten, thereby causing undefined behavior. The above can be achieved under heavy load (~30 netperf instances). Fix that by casting the subtraction result to u16, preventing it from being treated as a signed integer. Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07mlxsw: spectrum: Always decrement bridge's ref countIdo Schimmel
Since we only support one VLAN filtering bridge we need to associate a reference count with it, so that when the last port netdev leaves it, we would know that a different bridge can be offloaded to hardware. When a LAG device is memeber in a bridge and port netdevs are leaving the LAG, we should always decrement the bridge's reference count, as it's incremented for any port in the LAG. Fixes: 4dc236c31733 ("mlxsw: spectrum: Handle port leaving LAG while bridged") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07frv/PCI: Remove stray pci_{alloc,free}_consistent() declarationChristoph Hellwig
FRV doesn't implement pci_{alloc,free}_consistent(), so remove the declarations for them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: David Howells <dhowells@redhat.com>
2016-03-07s390/pci: add ioctl interface for CLPMartin Schwidefsky
Provide a user space interface to issue call logical-processor instructions. Only selected CLP commands are allowed, enough to get the full overview of the installed PCI functions. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390: Use pr_warn instead of pr_warningJoe Perches
Convert the uses of pr_warning to pr_warn so there are fewer uses of the old pr_warning. Miscellanea: o Align arguments o Coalesce formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390/dasd: remove casts to dasd_*_privateSebastian Ott
Convert dasd_device.private to be a void pointer to get rid of a lot of explicit casts. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390/dasd: Refactor dasd format functionsJan Höppner
Prepare for new format checking function by renaming functions and moving reusable code to separate functions: - Move sanity checks into a new function and make it reusable. - Move common format code to a new function called dasd_eckd_format_process_data. - Create the generic function dasd_eckd_format_build_ccw_req, which itself will then decide what ccw request is being built according to the input data. (with upcoming functionality). Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390/dasd: Simplify code in format logicJan Höppner
Currently, dasd_format is calling the format logic of a DASD discipline with PAV enabled. If that fails with an error code of -EAGAIN the value of retries is decremented and the discipline function is called with PAV turned off. The loop is supposed to try this up to 255 times until success. However, -EAGAIN can only occur once here and therefore the loop will never reach the 255 retries. So, replace the unnecessarily complicated loop logic and simply try again without PAV enabled in case of an -EAGAIN error. Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390/dasd: Improve dasd format codeJan Höppner
- Make sure a calling function can rely on data in fdata by resetting to its initial values - Move special treatment for track 0 and 1 to dasd_eckd_build_format - Replace dangerous backward goto with a loop logic - Add define for number that specifies the maximum amount of CCWs per request and is used for format_step calculation - Remove unused variable Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07Merge tag 'asoc-fix-v4.5-rc6' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.5 This is far too big a set of fixes for this late in the release cycle but the overwhelming bulk is essentially the same simple fix from Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace interface where drivers were accessing things using the wrong element in a union which worked OK on 32 bit platforms as the correct element happened to be aligned the same way but with 64 bit platforms ABIs are different and the two members of the union are laid out in different places. They aren't all tagged to stable since some of these chips have vanishingly little chance of being used in 64 bit systems. The other changes are: - A fix for Qualcomm devices to work on big endian systems. The original change is actually correct but triggered a bug in regmap which is too invasive to fix for this cycle and can be worked around by just letting regmap pick the default. - A fix for the Samsung I2S driver locking which wasn't using IRQ safe spinlocks when it needed to. - A fix for the new Intel Sky Lake driver forgetting that C pointer arithmetic takes the type of the pointer into consideration. - A revert of a change to the FSL SSI driver that broke some systems. - A fix for the cleanup path of the wm9713 driver. - A fix for some incorrect register definitions in the ADAU17x1 driver that caused misclocking in some configurations. - A fix for the tracepoints for jack detection to avoid using an internal field of the core jack structure which is no longer present in all configurations. - A fix for another of the new Intel drivers which tried to write to a string literal.
2016-03-07ARM: dts: dra7: do not gate cpsw clock due to errata i877Mugunthan V N
Errata id: i877 Description: ------------ The RGMII 1000 Mbps Transmit timing is based on the output clock (rgmiin_txc) being driven relative to the rising edge of an internal clock and the output control/data (rgmiin_txctl/txd) being driven relative to the falling edge of an internal clock source. If the internal clock source is allowed to be static low (i.e., disabled) for an extended period of time then when the clock is actually enabled the timing delta between the rising edge and falling edge can change over the lifetime of the device. This can result in the device switching characteristics degrading over time, and eventually failing to meet the Data Manual Delay Time/Skew specs. To maintain RGMII 1000 Mbps IO Timings, SW should minimize the duration that the Ethernet internal clock source is disabled. Note that the device reset state for the Ethernet clock is "disabled". Other RGMII modes (10 Mbps, 100Mbps) are not affected Workaround: ----------- If the SoC Ethernet interface(s) are used in RGMII mode at 1000 Mbps, SW should minimize the time the Ethernet internal clock source is disabled to a maximum of 200 hours in a device life cycle. This is done by enabling the clock as early as possible in IPL (QNX) or SPL/u-boot (Linux/Android) by setting the register CM_GMAC_CLKSTCTRL[1:0]CLKTRCTRL = 0x2:SW_WKUP. So, do not allow to gate the cpsw clocks using ti,no-idle property in cpsw node assuming 1000 Mbps is being used all the time. If someone does not need 1000 Mbps and wants to gate clocks to cpsw, this property needs to be deleted in their respective board files. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2016-03-07ARM: OMAP2+: hwmod: Introduce ti,no-idle dt propertyLokesh Vutla
Introduce a dt property, ti,no-idle, that prevents an IP to idle at any point. This is to handle Errata i877, which tells that GMAC clocks cannot be disabled. Acked-by: Roger Quadros <rogerq@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Rob Herring <robh@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2016-03-07Merge tag 'v4.5-rc7' into x86/asm, to pick up SMAP fixIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-07regulator: pv88090: fix incorrect clear of event registerJames Ban
This is a patch to fix incorrect clear of event register. Signed-off-by: James Ban <James.Ban.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-06tipc: fix nullptr crash during subscription cancelParthasarathy Bhuvaragan
commit 4d5cfcba2f6e ('tipc: fix connection abort during subscription cancel'), removes the check for a valid subscription before calling tipc_nametbl_subscribe(). This will lead to a nullptr exception when we process a subscription cancel request. For a cancel request, a null subscription is passed to tipc_nametbl_subscribe() resulting in exception. In this commit, we call tipc_nametbl_subscribe() only for a valid subscription. Fixes: 4d5cfcba2f6e ('tipc: fix connection abort during subscription cancel') Reported-by: Anders Widell <anders.widell@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06net: eth: altera: do not free array priv->mdio->irqColin Ian King
priv->mdio->irq used to be allocated and required freeing, but it is now a fixed sized array and should no longer be free'd. Issue detected using static analysis with CoverityScan Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06net/ethoc: do not free array priv->mdio->irqColin Ian King
priv->mdio->irq used to be allocated and required freeing, but it is now a fixed sized array and should no longer be free'd. Issue detected using static analysis with CoverityScan Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06net: sched: fix act_ipt for LOG targetPhil Sutter
Before calling the destroy() or target() callbacks, the family parameter field has to be initialized. Otherwise at least the LOG target will refuse to work and upon removal oops the kernel. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06asix: do not free array priv->mdio->irqColin Ian King
Used to be allocated and required freeing, but now priv->mdio->irq is now a fixed sized array and should no longer be free'd. Issue detected using static analysis with CoverityScan Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07pinctrl: lpc1850-scu: document nxp,gpio-pin-interruptJoachim Eastwood
Update devicetree documention for lpc1850-scu with the new nxp,gpio-pin-interrupt property. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-06gianfar: Enable eTSEC-106 erratum w/a for MPC8548E Rev2Atsushi Nemoto
Enable workaround for MPC8548E erratum eTSEC 106, "Excess delays when transmitting TOE=1 large frames". (see commit 53fad77375ce "gianfar: Enable eTSEC-20 erratum w/a for P2020 Rev1") This erratum was fixed in Rev 3.1.x. Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07pinctrl: lpc18xx: add nxp,gpio-pin-interrupt propertyJoachim Eastwood
Add support for setting up GPIO pin interrupts in the lpc18xx pinctrl driver. The LPC18xx SCU contain two registers that sets up the signal routing to the GPIO pin interrupt (PINT) block. The routing uses the GPIO namespace and not the pin namespace so a lookup is preformed on the pin. Routing configuration is done in the device tree by using the new nxp,gpio-pin-interrupt property. This property takes single parameter which sets the PINT hwirq for the GPIO. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07pinctrl: core: create nolock version of pinctrl_find_gpio_range_from_pinJoachim Eastwood
pinctrl_find_gpio_range_from_pin takes the pctldev->mutex but so does pinconf_pins_show and this will cause a deadlock if pinctrl_find_gpio_range_from_pin is used in .pin_config_get callback. Create a nolock version of pinctrl_find_gpio_range_from_pin to allow pin to gpio lookup to be used from pinconf_pins_show. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07pinctrl: lpc18xx: ensure ngroups is initialized at correct placeColin Ian King
The initialization of ngroups is occurring at the end of the first iteration of the outer loop, which means that the assignment pins[ngroups++] = i is potentially indexing into a region outside of array pins because ngroups is not initialized. Instead, initialize ngroups in the inner loop before the first inner loop iteration. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07m68knommu: remove obsolete 68360 supportGreg Ungerer
Remove the obsolete Motorola/Freescale 68360 SoC support. It has been bit rotting for many years with little active use in mainlne. There has been no serial driver support for many years, so it is largely not useful in its current state. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2016-03-07m68knommu: fix FEC platform device registration when driver is modularGreg Ungerer
The FEC (Fast Ethernet Crontroller) module on many ColdFire parts can be compiled into the kernel, or as a module. Therefore the platform device support for it is required whenever the driver is enabled - not just when built into the kernel. Use IS_ENABLED(CONFIG_FEC) instead of a conditional check on only the driver being built into the kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-03-06Linux 4.5-rc7v4.5-rc7Linus Torvalds
2016-03-06Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fix from Olof Johansson: "Tiny fixes branch this week, in fact only one patch. Turns out the USB support for a Renesas board was developed on a pre-release board that ended up being changed before shipping. To avoid breakage on those boards, and avoid confusion, it's a reasonable idea to patch now instead of later. There are no known users of the pre-release variant any more" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: porter: remove enable prop from HS-USB device node
2016-03-06Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Just two ARM fixes this time: one to fix the hyp-stub for older ARM CPUs, and another to fix the set_memory_xx() permission functions to deal with zero sizes correctly" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8544/1: set_memory_xx fixes ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
2016-03-07xfs: only run torn log write detection on dirty logsBrian Foster
XFS uses CRC verification over a sub-range of the head of the log to detect and handle torn writes. This torn log write detection currently runs unconditionally at mount time, regardless of whether the log is dirty or clean. This is problematic in cases where a filesystem might end up being moved across different, incompatible (i.e., opposite byte-endianness) architectures. The problem lies in the fact that log data is not necessarily written in an architecture independent format. For example, certain bits of data are written in native endian format. Further, the size of certain log data structures differs (i.e., struct xlog_rec_header) depending on the word size of the cpu. This leads to false positive crc verification errors and ultimately failed mounts when a cleanly unmounted filesystem is mounted on a system with an incompatible architecture from data that was written near the head of the log. Update the log head/tail discovery code to run torn write detection only when the log is not clean. This means something other than an unmount record resides at the head of the log and log recovery is imminent. It is a requirement to run log recovery on the same type of host that had written the content of the dirty log and therefore CRC failures are legitimate corruptions in that scenario. Reported-by: Jan Beulich <JBeulich@suse.com> Tested-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-03-07xfs: refactor in-core log state update to helperBrian Foster
Once the record at the head of the log is identified and verified, the in-core log state is updated based on the record. This includes information such as the current head block and cycle, the start block of the last record written to the log, the tail lsn, etc. Once torn write detection is conditional, this logic will need to be reused. Factor the code to update the in-core log data structures into a new helper function. This patch does not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-03-07xfs: refactor unmount record detection into helperBrian Foster
Once the mount sequence has identified the head and tail blocks of the physical log, the record at the head of the log is located and examined for an unmount record to determine if the log is clean. This currently occurs after torn write verification of the head region of the log. This must ultimately be separated from torn write verification and may need to be called again if the log head is walked back due to a torn write (to determine whether the new head record is an unmount record). Separate this logic into a new helper function. This patch does not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-03-07xfs: separate log head record discovery from verificationBrian Foster
The code that locates the log record at the head of the log is buried in the log head verification function. This is fine when torn write verification occurs unconditionally, but this behavior is problematic for filesystems that might be moved across systems with different architectures. In preparation for separating examination of the log head for unmount records from torn write detection, lift the record location logic out of the log verification function and into the caller. This patch does not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-03-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph fix from Sage Weil: "This is a final commit we missed to align the protocol compatibility with the feature bits. It decodes a few extra fields in two different messages and reports EIO when they are used (not yet supported)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support
2016-03-06Merge tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI fix from Richard Weinberger: "This contains a single bug fix for UBI" * tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifs: ubi: Fix out of bounds write in volume update code
2016-03-06Merge branch 'for-linus-4.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger: "This contains three bug/build fixes" * 'for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: use %lx format specifiers for unsigned longs um: Export pm_power_off Revert "um: Fix get_signal() usage"
2016-03-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Another round of fixes for 4.5: - Fix the use of an undocumented syntactial variant of the .type pseudo op which is not supported by the LLVM assembler. - Fix invalid initialization on S-cache-less systems. - Fix possible information leak from the kernel stack for SIGFPE. - Fix handling of copy_{from,to}_user() return value in KVM - Fix the last instance of irq_to_gpio() which now was causing build errors" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp' MIPS: kvm: Fix ioctl error handling. MIPS: scache: Fix scache init with invalid line size. MIPS: Avoid variant of .type unsupported by LLVM Assembler MIPS: jz4740: Fix surviving instance of irq_to_gpio()
generated by cgit (git 2.34.1) at 2025-09-15 04:03:50 +0000