| Age | Commit message (Collapse) | Author |
|---|
|
For some KVM exception types, they share the same exception handler. To
show the difference, ecode (exception code) is added as a new parameter
in exception handlers.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
As clearly seen on other non-MediaTek platforms, this is known to
eventually produce regressions in the future, as drivers may break
ABI and stop working with older firmware versions.
Although the firmware-name property was used in multiple MediaTek
devicetrees for the System Companion Processor (SCP) node, avoid
doing the same on MT8390 to lessen eventual ABI breakages that may
happen with a driver update to change the firmware retrieval logic
for the SCP.
This reverts commit 2f0066dae66f30386ecd6408410e27a4d6818c15.
Link: https://lore.kernel.org/r/20250520111002.282841-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Address various dt-binding warnings for most of the MDP3 nodes by
adding and removing interrupts and power domains where required.
Also, remove the mediatek,mt8195-mdp3-rdma fallback compatible
from the main MDP3 RDMA node as the two have never really been
fully compatible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250520104024.3706723-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Rename the node 'mt6359rtc' to 'rtc', as required by the binding.
Fix the following dtb-check error:
mediatek/mt8395-radxa-nio-12l.dtb: pmic: 'mt6359rtc' do not match
any of the regexes: 'pinctrl-[0-9]+'
Fixes: 3b7d143be4b7 ("arm64: dts: mt6359: add PMIC MT6359 related nodes")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250514-mt8395-dtb-errors-v2-3-d67b9077c59a@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The Mediatek Genio 350-EVK board has on the DSI0 connector a StarTek
KD070FHFID015 display panel that uses a Goodix GT9271 I2C capacitive
touch controller.
The mt8365-evk devicetree already have the display panel support but
lacks the touchscreen support, so add it.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250515-mt8365-evk-enable-touchscreen-v1-1-7ba3c87b2a71@collabora.com
[Angelo: Reordered regulator nodes and interurpts-extended property]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The binding now require the '#reset-cells' property but the
devicetree has not been updated which trigger dtb-check errors.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250516-dtb-check-mt8188-v2-2-fb60bef1b8e1@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Introduce PCIe controller nodes to EN7581 SoC and EN7581 evaluation
board.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20250517-en7581-evb-pcie-v1-2-97297eb063bb@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Introduce missing gpio-ranges property for Airoha EN7581 gpio controller
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20250517-en7581-evb-pcie-v1-1-97297eb063bb@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Configure and enable SPI nodes on Bananapi R4 board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20250516180147.10416-13-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add Fan and cooling maps for Bananapi-R4 board.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20250516180147.10416-12-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
MT7988 contains buildin mt753x switch which needs calibration data from
efuse.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20250516180147.10416-9-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The NIX_PARSE_S structure populated by hardware in the
NIX RX CQE has parsing information for the received packet.
A tracepoint to dump the all words of NIX_PARSE_S
is helpful in debugging packet parser.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/1747331048-15347-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to use uart0 or spi1 there is only 1 possible pin definition
so move them to soc dtsi to reuse them in other boards and avoiding
conflict if defined twice.
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20250516180147.10416-7-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add SPI controllers for mt7988.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20250516180147.10416-6-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Enable XS-Phy on Bananapi R4 for pcie2.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-9-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
First usb and third pcie controller on mt7988 need a xs-phy to work
properly.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-8-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Sinovoip has released other variants of Bananapi-R4 board.
The known changes affecting only the LAN SFP+ slot which is replaced
by a 2.5G phy with optional PoE.
Just move the common parts to a new dtsi and keep differences (only
i2c for lan-sfp) in dts.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-3-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add new compatible for Bananapi R4 with 2.5G phy.
Base board is compatible with existing BPI-R4 only 1 SFP is replaced
by RJ45 port and use mt7988 internal phy.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-2-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
After having factored out the provider part from mdio_bus.c, we can
make the mdio consumer / device layer a separate module. This also
allows to remove Kconfig symbol MDIO_DEVICE.
The module init / exit functions from mdio_bus.c no longer have to be
called from phy_device.c. The link order defined in
drivers/net/phy/Makefile ensures that init / exit functions are called
in the right order.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dba6b156-5748-44ce-b5e2-e8dc2fcee5a7@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds a match entry for using all the amps on a CDB35L63-CB2 board
without the CS42L43 codec. Configuration is:
SDW3: 1x CS35L63 (OUT1)
SDW1: 1x CS35L63 (OUT2)
Speaker playback and amp feedback are aggregated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250516152107.210994-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
CS35L63 is very similar to CS35L56, and uses the same driver, so we
can use the same configuration.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250516152107.210994-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the DAI
drivers required to connect an SDCA Function into an ASoC soundcard.
Create DAI driver structures and populate the supported sample rates
and sample widths into them based on the Input/Output Terminal and any
attach Clock Source entities. More complex relationships with channels
etc. will be added later as constraints as part of the DAI startup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the
ALSA controls required by an SDCA Function. This maps all User and
Application level SDCA Controls to ALSA controls. Typically controls
marked with those access levels are just volumes and mutes.
SDCA defines volume controls as an integer in 1/256ths of a dB and
then provides a mechanism to specify what values are valid (range
templates). Currently only a simple case of a single linear volume
range with a power of 2 step size is supported. This allows the code
to expose the volume control using a simple shift. This will need
expanded in the future, to support more complex ranges and probably
also some additional control types but this should be sufficient to
for a first pass.
For non-dataport terminal widgets also add a pin switch to allow
that endpoint to be turned on/off.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create DAPM
widgets and routes representing a SDCA Function. For the most part SDCA
maps well to the DAPM abstractions.
The primary point of interest is the SDCA Power Domain Entities
(PDEs), which actually control the power status of the device. Whilst
these PDEs are the primary widgets the other parts of the SDCA graph
are added to maintain a consistency with the hardware abstract,
and allow routing to take effect. As for the PDEs themselves the
code currently only handle PS0 and PS3 (basically on and off),
the two intermediate power states are not commonly used and don't
map well to ASoC/DAPM.
Other minor points of slightly complexity include, the Group Entities
(GEs) these set the value of several other controls, typically
Selector Units (SUs) for enabling a cetain jack configuration. Multiple
SUs being controlled by a GE are easily modelled creating a single
control and sharing it among the controlled muxes.
SDCA also has a slight habit of having fully connected paths, relying
more on activating the PDEs to enable functionality. This doesn't
map quite so perfectly to DAPM which considers the path a reason to
power the PDE. Whilst in the current specification Mixer Units are
defined as fixed-function, in DAPM we create a virtual control for
each input (which defaults to connected). This allows paths to be
connected/disconnected, providing a more ASoC style approach to
managing the power. PIN_SWITCHs will also be added for non-dataport
terminal entities in a later patch along with the other ALSA controls,
providing greater flexibility in power management.
A top level helper sdca_asoc_populate_component() is exported that
counts and allocates everything, however, the intermediate counting and
population functions are also exported. This will allow end drivers to
do allocation and add custom handling, which is probably fairly likely
for the early SDCA devices.
Clock muxes are currently not fully supported, so some future work will
also be required there.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The core currently supports pin switches for source/sink widgets, but
only at the card level. SDCA components specify the fabric at the
level of the individual components, to support this add helpers to
allow component level pin switches.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the allocation of the PDE delays array until after the size has
been adjusted, this saves an additional division and simplifies the
code slightly.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to include MODULE_LICENSE() and MODULE_DESCRIPTION() in
sdca_regmap.c as this file is part of a larger module that already
defines these.
Fixes: e3f7caf74b79 ("ASoC: SDCA: Add generic regmap SDCA helpers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix minor typo SDAC -> SDCA.
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A few, quite rare, WMI attributes have names that are not compatible with
filenames, e.g. "Intel VT for Directed I/O (VT-d)".
For these cases the '/' gets replaced with '\' for display, but doesn't
get switched again when doing the WMI access.
Fix this by keeping the original attribute name and using that for sending
commands to the BIOS
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250520005027.3840705-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If user modifies the battery charge threshold an ACPI event is generated.
Confirmed with Lenovo FW team this is only generated on user event. As no
action is needed, ignore the event and prevent spurious kernel logs.
Reported-by: Derek Barbosa <debarbos@redhat.com>
Closes: https://lore.kernel.org/platform-driver-x86/7e9a1c47-5d9c-4978-af20-3949d53fb5dc@app.fastmail.com/T/#m5f5b9ae31d3fbf30d7d9a9d76c15fb3502dfd903
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250517023348.2962591-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Merge series from Geert Uytterhoeven <geert+renesas@glider.be>:
This patch series (A) improves single transfer sizes in the MSIOF
driver, using two methods:
- By increasing the assumed FIFO sizes, impacting both PIO and DMA
transfers,
- By using two groups, impacting DMA transfers,
and (B) lets the recently-introduced MSIOF I2S drive reuse the SPI
driver's register definitions. All of this is covered with a thick
sauce of fixes for (harmless) bugs, cleanups, and refactorings.
Note that the driver uses the limitations as specified in the hardware
documentation. For discovering the actual FIFO sizes, I wrote some
crude test code that can be found at [2].
This is based on spi/for-next and sound-asoc/for-next, and has been
tested on a variery of R-Car SoCs.
[1] https://lore.kernel.org/cover.1746180072.git.geert+renesas@glider.be
[2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/msiof-fifo
|
|
Merge series from Sumanth Gavini <sumanth.gavini@yahoo.com>:
This series fixes the misspelling of "Electronics" as "Electrnoics"
across multiple subsystems (MFD, NFC, EXTCON). Each patch targets
a different subsystem for easier review.
The changes are mechanical and do not affect functionality.
Sumanth Gavini (6):
nfc: s3fwrn5: Correct Samsung "Electronics" spelling in copyright
headers
nfc: virtual_ncidev: Correct Samsung "Electronics" spelling in
copyright headers
extcon: extcon-max77693: Correct Samsung "Electronics" spelling in
copyright headers
mfd: maxim: Correct Samsung "Electronics" spelling in copyright
headers
mfd: maxim: Correct Samsung "Electronics" spelling in headers
regulator: max8952: Correct Samsung "Electronics" spelling in
copyright headers
drivers/extcon/extcon-max77693.c | 2 +-
drivers/nfc/s3fwrn5/core.c | 2 +-
drivers/nfc/s3fwrn5/firmware.c | 2 +-
drivers/nfc/s3fwrn5/firmware.h | 2 +-
drivers/nfc/s3fwrn5/i2c.c | 2 +-
drivers/nfc/s3fwrn5/nci.c | 2 +-
drivers/nfc/s3fwrn5/nci.h | 2 +-
drivers/nfc/s3fwrn5/phy_common.c | 4 ++--
drivers/nfc/s3fwrn5/phy_common.h | 4 ++--
drivers/nfc/s3fwrn5/s3fwrn5.h | 2 +-
drivers/nfc/virtual_ncidev.c | 2 +-
include/linux/mfd/max14577-private.h | 2 +-
include/linux/mfd/max14577.h | 2 +-
include/linux/mfd/max77686-private.h | 2 +-
include/linux/mfd/max77686.h | 2 +-
include/linux/mfd/max77693-private.h | 2 +-
include/linux/mfd/max77693.h | 2 +-
include/linux/mfd/max8997-private.h | 2 +-
include/linux/mfd/max8997.h | 2 +-
include/linux/mfd/max8998-private.h | 2 +-
include/linux/mfd/max8998.h | 2 +-
include/linux/regulator/max8952.h | 2 +-
22 files changed, 24 insertions(+), 24 deletions(-)
--
2.43.0
|
|
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
|
|
If either REGMAP_IRQ or REGMAP_MDIO are set then REGMAP is also set.
This then enables the selecting of IRQ_DOMAIN or MDIO_BUS from REGMAP
based on the above two symbols respectively. This makes it very easy
to end up with "circular dependencies".
Instead select the IRQ_DOMAIN or MDIO_BUS from the symbols that make
use of them. This is almost equivalent to before but makes it less
likely to end up with false circular dependency detections.
Signed-off-by: Andrew Davis <afd@ti.com>
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Closes: https://lore.kernel.org/r/bfe991fa-f54c-4d58-b2e0-34c4e4eb48f4@linaro.org/
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250516141722.13772-1-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function sdm845_slim_snd_hw_params() calls the functuion
snd_soc_dai_set_channel_map() but does not check its return
value. A proper implementation can be found in msm_snd_hw_params().
Add error handling for snd_soc_dai_set_channel_map(). If the
function fails and it is not a unsupported error, return the
error code immediately.
Fixes: 5caf64c633a3 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519075739.1458-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add an useful info when failed to get irq/wakeirq due to -EPROBE_DEFER.
Before:
[ 15.737361] i2c 2-0050: deferred probe pending: (reason unknown)
After:
[ 15.816295] i2c 2-0050: deferred probe pending: tcpci: can't get irq
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
White Hawk ARD audio uses a clock generated by the TPU, but commit
3d144ef10a44 ("pinctrl: renesas: r8a779g0: Fix TPU suffixes") renamed
pin group "tpu_to0_a" to "tpu_to0_b". Update DTS accordingly otherwise
the sound driver does not receive a clock signal.
Fixes: 3d144ef10a448f89 ("pinctrl: renesas: r8a779g0: Fix TPU suffixes")
Signed-off-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/TYCPR01MB8740608B675365215ADB0374B49CA@TYCPR01MB8740.jpnprd01.prod.outlook.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
We are already within another `#ifdef CONFIG_GPIOLIB_IRQCHIP` in
gpiochip_to_irq() so there's no need for another guard. Remove it.
Acked-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250519-gpio-irq-kconfig-fixes-v1-3-fe6ba1c6116d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: 7688a54d5b53 ("gpio: mpc8xxx: Make irq_chip immutable")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505180309.1nosQMkI-lkp@intel.com/
Acked-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250519-gpio-irq-kconfig-fixes-v1-2-fe6ba1c6116d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: 20117cf426b6 ("gpio: pxa: Make irq_chip immutable")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505181429.mzyIatOU-lkp@intel.com/
Acked-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250519-gpio-irq-kconfig-fixes-v1-1-fe6ba1c6116d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Lenovo Yoga Pro 7 (gen 10) with Realtek ALC3306 and combined CS35L56
amplifiers need quirk ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN to
enable bass
Signed-off-by: Ed Burcher <git@edburcher.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250519224907.31265-2-git@edburcher.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
High-level copy_to_user_* APIs already redact SA secret fields when
redaction is enabled, but the state teardown path still freed aead,
aalg and ealg structs with plain kfree(), which does not clear memory
before deallocation. This can leave SA keys and other confidential
data in memory, risking exposure via post-free vulnerabilities.
Since this path is outside the packet fast path, the cost of zeroization
is acceptable and prevents any residual key material. This patch
replaces those kfree() calls unconditionally with kfree_sensitive(),
which zeroizes the entire buffer before freeing.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Currently, all SCMI devices with performance domains attempt to register
a cpufreq driver, even if their performance domains aren't used to
control the CPUs. The cpufreq framework only supports registering a
single driver, so only the first device will succeed. And if that device
isn't used for the CPUs, then cpufreq will scale the wrong domains.
To avoid this, return early from scmi_cpufreq_probe() if the probing
SCMI device isn't referenced by the CPU device phandles.
This keeps the existing assumption that all CPUs are controlled by a
single SCMI device.
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
|
|
Introduce a Rust-based implementation of the cpufreq-dt driver, covering
most of the functionality provided by the existing C version. Some
features, such as retrieving platform data from `cpufreq-dt-platdev.c`,
are still pending.
The driver has been tested with QEMU, and frequency scaling works as
expected.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Extend the OPP abstractions to include support for interacting with the
cpufreq core, including the ability to retrieve frequency tables from
OPP table.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Extend the cpufreq abstractions to support driver registration from
Rust.
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Extend the cpufreq abstractions to include support for policy handling
and driver operations.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Introduce initial Rust abstractions for the cpufreq core. This includes
basic representations for cpufreq flags, relation types, and the cpufreq
table.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
