summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-26staging: et131x: Bugfix - driver doesn't autoreneg after cable unplug/plug ↵Mark Einon
events This driver has a long standing bug where removing and inserting the ethernet cable results in no packets being trnasmitted / received and hence no autonegotiation occurring. Fixed by resetting the rx/tx engines and queue on detecting a cable being removed. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: et131x: Remove header declaration of et131x_check_mii()Mark Einon
et131x_check_mii no longer exists, remove its declaration from the header file Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: et131x: Create et131x_[dis|en]able_txrx() callsMark Einon
In et131x_netdev.c, a series of calls to enable and diasble the rx/tx engine and queue are being used in several different places. Create two functions to encapsulate these calls, and replace many calls with just the one. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: et131x: Remove et131x_check_mii() and move functionality into ↵Mark Einon
et131x_adjust_link() et131x_check_mii() is now only being called from et131x_adjust_link. Removed this call and associated subroutines, putting the functionality directly into et131x_adjust_link(), in preparation for further simplification. Changed register checks from bare BMSR checks to use phydev/netif versions, also now uses adapter->link to track link state changes. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: et131x: Add link status to adapter structMark Einon
This will be used to determine if the link state has changed when the phydev informs the et131x that a change has occurred (in et131x_adjust_link) Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: et131x: support register dump in ethtool opsMark Einon
Not an exhaustive dump of the et131x registers, used while debugging a specific problem - seems a shame not to keep it around. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: gma500: gtt based hardware scrolling consoleAlan Cox
Add support for GTT based scrolling. Instead of pushing bits around we simply use the GTT to change the mappings. This provides us with a very fast way to scroll the display providing we have enough memory to allocate on 4K line boundaries. In practice this seems to be the case except for very big displays such as HDMI. It works out nicely on the usual configurations are netbooks and tablets. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: gma500: frame buffer lockingAlan Cox
If we are the console then a printk can hit us with a spin lock held (and in fact the kernel will do its best to take printing lock). In that case we cannot politely sleep when synching after an accelerated op but must behave obnixously to be sure of getting the bits out. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio: Prevent reading from buffer chrdev when device has no buffer.Jonathan Cameron
Silly bug introduced during the chrdev merge series. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio:magnetometer:ak8975: Fix probe() error-handlingStephen Warren
Fix ak8975_probe() to jump to the appropriate exit labels when an error occurs. With the previous code, some cleanup actions were being skipped for some error conditions. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio:magnetometer:ak8975: Don't assume 0 is an invalid GPIOStephen Warren
gpio_is_valid() is the defined mechanism to determine whether a GPIO is valid. Use this instead of assuming that 0 is an invalid GPIO. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio:magnetometer:ak8975 use platform_data to pass the gpio number.Jonathan Cameron
Tegra doesn't have irq_to_gpio() any more, and ak8975 is included in tegra_defconfig. This causes a build failure. Instead, pass the GPIO name through platform data. [swarren: Rewrote commit description when I squashed this with my patch to remove the irq_to_gpio() call] Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio:accel:lis3l02dq ring->buffer renames.Jonathan Cameron
This driver already supports kfifo usage, so the term ring is misleading and hence replaced. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio: replacing term ring with buffer in the IIO core.Jonathan Cameron
They aren't always ring buffers, so just use buffer for all naming. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio: rename ring_generic.h -> buffer_generic.hJonathan Cameron
Nothing in this file is specific to RING buffers so rename it. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio: tree wide IIO_RING_BUFFER config symbol to IIO_BUFFERJonathan Cameron
Functionality is generic, so name is missleading. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio: tree wide IIO_RING_TRIGGERED -> IIO_BUFFER_TRIGGEREDJonathan Cameron
also, IIO_RING_HARDWARE_BUFFER -> IIO_BUFFER_HARDWARE These aren't always rings so the naming should not imply that. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio: treewide rename iio_triggered_ring_* to iio_triggered_buffer_*Jonathan Cameron
Not always a ring so naming is missleading. Also, kfifo_buf is probably first buffer to take out of staging and it definitely isn't a ring. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio:documentation Add abi docs for capacitance adcs.Jonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio:documentation general refresh of abi docs.Jonathan Cameron
Numerous small fixes and additions of missing elements. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: iio: Move sensor drivers to sub menusManuel Stahl
We have a lot of drivers now, so the iio sub menu becomes quite large. This patch creates sub menus for the different sensors. Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: iio: adc: Replace, rewrite ad7745 from scratch.Michael Hennerich
The existing ad7745 driver didn't conform with the IIO spec for such devices. It was way simpler to rewrite the existing driver, than actually fixing it. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26Staging: intel_sst: instel_sst: fixed some coding style issues.Jaap Crezee
Fixed a coding style issue. Signed-off-by: Jaap Crezee <jaap@jcz.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: mei: Organize the initialization state machine.Oren Weil
moving the final state, clearing of the client maps and updating of mei state out from mei_host_client_properties function. Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26Staging: rtl8192e: off by one in rtl8192_get_channel_map()Dan Carpenter
COUNTRY_CODE_MAX is not a valid country code. We're off by one here. This gets passed to Dot11d_Channelmap() where it's used as an offset into the ChannelPlan[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: simplified internal ioctl function once moreRoland Vossen
Code cleanup. Merged two functions. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: consistent naming of struct net_device *ndevRoland Vossen
Code cleanup. Various names (ndev, net, dev) were used for the same structure. Settled for 'ndev'. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: clarified fullmac io and event codesRoland Vossen
Added comments to make code more readable. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: removed log after kzalloc()/kmalloc() failureRoland Vossen
kzalloc/kmalloc already reports an allocation failure themselves. Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: removed likely/unlikely callsRoland Vossen
There was no performance rationale to use these guys. Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: added endianness check flag to fullmac MakefileRoland Vossen
Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: removed two fullmac sparse spinlock warningsRoland Vossen
By deleting three redundant functions. The spinlock was related to event queue operation. Event queue data members were also renamed to make their function more clear. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove global variables for data frame boundaryFranky Lin
Put boundary settings in brcmf_bus structure Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove fullmac module_param brcmf_idletimeFranky Lin
Use constant for idle time setting. Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove fullmac module_param for watchdogFranky Lin
Use constant to replace global variable used for watchdog polling Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove fullmac module_param brcmf_sdiod_drive_strengthFranky Lin
Replaced the global variable with constant Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove fullmac module_param brcmf_dongle_memsizeFranky Lin
remove unused module parameter brcmf_dongle_memsize and related code Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove event handler thread from fullmacFranky Lin
Use work queue to defer cfg80211 event handle jobs Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove unconditional code blocks from brcmfmacArend van Spriel
Using a block statement to scope function variables is not common in linux kernel development. Browsed through the brcmfmac to remove those. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: more fullmac sparse endianness scan related changesRoland Vossen
Annotated endianness on structures send/received to/from dongle. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: sparse endianness warnings for struct sdpcm_sharedRoland Vossen
Structure that is received from dongle has been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: sparse endianness warnings for struct brcmf_proto_cdc_ioctlRoland Vossen
Structure that is send/received to/from dongle has been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: various fulmac sparse endianness fixesRoland Vossen
Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: sparse endianness warnings on dongle eventsRoland Vossen
Structures received from dongle have been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20Staging: hv: vmbus: Get rid of hv_cb_utils[] and other unneeded codeK. Y. Srinivasan
Now that the transformation of the util driver is complete, get rid of hv_cb_utils[] and other unneeded code. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20Staging: hv: util: Properly handle util services in the util driverK. Y. Srinivasan
Now, properly handle util services in the util driver and eliminate code that will not be necessary. In the current code, util services were all handled not as other vmbus devices (net, block) but rather through special handling (channel setup etc.). In this patch we handle all services using the standard Linux Driver Model. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20Staging: hv: util: Perform some service specific init/deinit in probe/removeK. Y. Srinivasan
In preparation for modifying the util driver to fully conform to the Linux Driver Model, perform some service specific init and de-init operations in util_probe()/util_remove() as opposed to in init_hyperv_utils()/exit_hyperv_utils() as is currently done. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20staging: wlags49_h2: Support standard WEXT eventsDavid Kilroy
... instead of using IWEVCUSTOM. Use the defined events for michael mic failure, association request info and association response info. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20staging: wlags49_h2: Remove old WIRELESS_EXT supportDavid Kilroy
Since the driver is now in-kernel remove support for building against ancient WIRELESS_EXT versions. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-19staging: quatech_usb2: Potential lost wakeup scenario in TIOCMIWAITKautuk Consul
If the usermode app does an ioctl over this serial device by using TIOCMIWAIT, then the code will wait by setting the current task state to TASK_INTERRUPTIBLE and then calling schedule(). This will be woken up by the qt2_process_modem_status on URB completion when the port_extra->shadowMSR is set to the new modem status. However, this could result in a lost wakeup scenario due to a race in the logic in the qt2_ioctl(TIOCMIWAIT) loop and the URB completion for new modem status in qt2_process_modem_status. Due to this, the usermode app's task will continue to sleep despite a change in the modem status. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2025-09-29 22:19:58 +0000